Jin Heon Kwon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jin Heon Kwon has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Nadir Ayrilmis
Department of Wood Mechanics and Technology, Forestry Faculty, Istanbul University-Cerrahpasa, Bahcekoy, Sariyer, Istanbul 34473, Turkey
3 shared publications - Alperen Kaymakci
Istanbul University, Istanbul, Turkey
1 shared publication Chan-Woo Park
Department of Forest Biomaterials Engineering, College of Forest and Environmental Sciences, Kangwon National University, Chuncheon city, Republic of Korea
1 shared publication- Ferhat Ozdemir
ARTICLE INFO Research Article
1 shared publication - Seung-Hwan Lee
Institute of Forest Science, Kangwon National University, Chuncheon, Republic of Korea
1 shared publication Tae Hyung Han
Kangwon National University, Republic of Korea
1 shared publication
Latest Publications
- 20 April 2016
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 30 (18) , 2032-2043
Microfibrillated-cellulose-modified urea-formaldehyde adhesives with different F/U molar ratios for wood-based composites
The relationship between urea–formaldehyde (UF) adhesives (E0 and E1 classes) and microfibrillated-cellulose (MFC) and its effect on the mechanical properties of laminated veneer lumbers (LVLs) were investigated. Bending strength, modulus of elasticity in bending, and tensile shear strength of the LVLs were determined. The morphology, gel time, viscosity, and acidity of the modified UF adhesives were also investigated. The tensile shear strength of the LVLs significantly increased (2.89 to 3.35 N/mm2) as the MFC suspension was increased to 3.75 g in the 7.50 g E0 class UF adhesive, while it slightly increased (3.10 to 3.16 N/mm2) as the MFC suspension was increased to 2.5 g in the 8.75 g E1 class UF adhesive. The results showed that the bond performance of the E0 class adhesive with the MFC was better than that of the E1 class adhesive with the MFC. The MFC was found to be valuable nanoscale reinforcing filler for the improvement of bond performance of UF adhesive, in particular, E0 class adhesive, in the production of wood-based composites.
- 20 April 2016
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 30 (18) , 2032-2043
Microfibrillated-cellulose-modified urea-formaldehyde adhesives with different F/U molar ratios for wood-based composites
The relationship between urea–formaldehyde (UF) adhesives (E0 and E1 classes) and microfibrillated-cellulose (MFC) and its effect on the mechanical properties of laminated veneer lumbers (LVLs) were investigated. Bending strength, modulus of elasticity in bending, and tensile shear strength of the LVLs were determined. The morphology, gel time, viscosity, and acidity of the modified UF adhesives were also investigated. The tensile shear strength of the LVLs significantly increased (2.89 to 3.35 N/mm2) as the MFC suspension was increased to 3.75 g in the 7.50 g E0 class UF adhesive, while it slightly increased (3.10 to 3.16 N/mm2) as the MFC suspension was increased to 2.5 g in the 8.75 g E1 class UF adhesive. The results showed that the bond performance of the E0 class adhesive with the MFC was better than that of the E1 class adhesive with the MFC. The MFC was found to be valuable nanoscale reinforcing filler for the improvement of bond performance of UF adhesive, in particular, E0 class adhesive, in the production of wood-based composites.
- Open Access
- 24 December 2014
- Published by Universidad del Bio Bio in Maderas. Ciencia y Tecnología
- Vol. 16 (3) , 365-372
Improving dimensional stability of injection molded wood plastic composites using cold and hot water extraction methods
Dimensional stability of wood plastic composites (WPCs) made from polypropylene and pine wood flour with and without coupling agent was investigated. The pine wood flour was prepared from wood chips which had been immersed, respectively, in boiling water for 1 h, 3 h, and 5 h or in distilled water for 1 day, 3 days, and 5 days at room temperature. It was found that thickness swelling (TS) and water absorption (WA) of the WPCs made using extracted wood were lower than those of WPCs produced with unextracted wood. The TS and WA values of WPCs decreased with extraction duration both for cold and hot water extraction. The effect of hot water extraction on the TS and WA properties of the WPCs was more pronounced than cold water extraction.
- 24 December 2014
- Published by Universidad del Bio Bio in Maderas. Ciencia y Tecnología
- Vol. 16 (3) , 365-372
Open AccessImproving dimensional stability of injection molded wood plastic composites using cold and hot water extraction methods
Dimensional stability of wood plastic composites (WPCs) made from polypropylene and pine wood flour with and without coupling agent was investigated. The pine wood flour was prepared from wood chips which had been immersed, respectively, in boiling water for 1 h, 3 h, and 5 h or in distilled water for 1 day, 3 days, and 5 days at room temperature. It was found that thickness swelling (TS) and water absorption (WA) of the WPCs made using extracted wood were lower than those of WPCs produced with unextracted wood. The TS and WA values of WPCs decreased with extraction duration both for cold and hot water extraction. The effect of hot water extraction on the TS and WA properties of the WPCs was more pronounced than cold water extraction.
- Open Access
- 9 September 2014
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 17 (5) , 1309-1315
Combined effect of thermoplastic and thermosetting adhesives on properties of particleboard with rice husk core
- 9 September 2014
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 17 (5) , 1309-1315
Open AccessCombined effect of thermoplastic and thermosetting adhesives on properties of particleboard with rice husk core