DHDaven K. Henze

Daven K. Henze

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Daven K. Henze has a total of 88 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Is there an optimal wavelength for germicidal ultraviolet air disinfection?

    by Zhe Peng, Ben Ma, Daven Henze, Shelly Miller, Joost de Gouw, Jose Jimenez

    Germicidal UV (GUV) disinfection is effective against airborne pathogens, but it has been recently reported to increase indoor air pollution. Conventional GUV at 254 nm is applied in the upper room only due to skin/eye safety limits, while “Far UVC” (e.g. at 222 nm) is applied across the whole room due to less restrictive safety limits, enabling simpler installation and disinfection. We investigate GUV between 185 and 310 nm by modeling, in search of an optimal wavelength with both high disinfection and safety. For a specific fluence rate, GUV-induced air pollution health risks are at least ~20 times larger below 245 nm than above it. This is mainly due to O3 production through O2 photolysis below 245 nm, with a contribution from particulate matter formation from enhanced volatile organic compound oxidation. When normalized to a constant CDC-recommended disinfection rate of 5 equivalent air changes per hour (eACH), pollution risk below 245 nm is also at least ~20 times that above 245 nm. At very high disinfection rates such as 20 eACH, the difference between the ratios below and above 245 nm is smaller, but still a factor of ~20. Our results show a clear advantage of upper-room GUV vs. Far UVC for indoor air quality. These results appear robust despite substantial uncertainties in absolute disinfection efficiencies, which are a critical limitation for widespread GUV application. Thus, there is no optimal GUV wavelength across all important criteria (exposure limits, disinfection efficiency, indoor air quality, and logistic requirements), and these tradeoffs should be considered in different situations to maximize the overall benefit. Use of Far UVC may require simultaneous deployment of air cleaning for pollution. As new practical UV light sources at wavelengths other than 222 and 254 nm keep being developed, this study provides guidance for evaluating and selecting wavelength(s) for GUV air disinfection.

  • Open Access

    Exploring the role of climate action in transboundary air pollution inequality using GEOS-Chem adjoint sensitivities

    by M. Omar Nawaz, Daven Henze

    IntroductionGiven its atmospheric lifetime of days to a week, fine particulate matter (PM2.5) – an air pollutant responsible for adverse health effects – can be advected far beyond its sources and across political borders. This uncomfortable exchange leads to inequality, in which a country may bear air pollution-related health impacts associated with anthropogenic emission activity beyond its borders. Climate action is irrevocably linked to this inequality. Anthropogenic sources of greenhouse gases often co-emit air pollutants and their chemical precursors; thus, action targeting greenhouse gases can result in air pollution-related co-benefits that are realized through improvements in air quality. MethodsDespite this close linkage, much of the research on co-benefits has focused on quantifying benefits in terms of magnitude or absolute number. This ignores how atmospheric composition source-receptor dynamics could be affected by climate action. In this study, we quantify how air pollution exchanges within and between regions (e.g., Africa and Europe) could vary across different shared socioeconomic pathways (SSPs) and representative concentration pathways (RCPs). We perform thousands of GEOS-Chem adjoint simulations to calculate the sensitivities of country-scale PM2.5 exposures to their precursor emissions. We then combine these simulated sensitivities with gridded emission projections for the SSPs and RCPs to determine how source-receptor relationships between specific countries and regions may differ across different climate futures. Lastly, we leverage methods from the Global Burden of Disease study to assess the impacts of transboundary air pollution exchange on human health. Results and DiscussionWe find that reductions in anthropogenic emissions from climate action in more sustainable futures (SSP1-19) results in more co-benefits (480 thousand deaths avoided) than worst-case scenario fragmentation futures (SSP3-60) (140 thousand deaths avoided). In sustainable futures (SSP1), African countries have more influence on climate co-benefits; they contribute between 2.3-2.8 times as many benefits to European countries than vice-versa. However, in fragmented futures (SSP3), this dynamic flips and African countries become more dependent on European climate action as they contribute between 1.7-0.4 times as many benefits. Ultimately, this suggests that changes in anthropogenic emissions associated with climate action have the capacity to not only affect atmospheric composition through improved air quality but also to modify exchange relationships between individual countries and regions.

  • Open Access

    Improving Black Carbon Emission Estimates at Global Scale Using GEOS-Chem model and 4D-Var assimilation of TROPOMI/GRASP data

    by Abhinna Behera, Cheng Chen, Oleg Dubovik, Pavel Litvinov, Yixuan Gu, Daven Henze, Tatyana Lapyonok, François Thieuleux, Benjamin Guinot

    Radiative forcing by light-absorbing aerosols, particularly black carbon (BC), a major climate forcing agent alongside CO2 and CH4, remains poorly constrained due to insufficient characterisation of their optical properties and highly variable spatio-temporal distributions. Here we aim to refine BC’s spatio-temporal variability using the GEOS-Chem 3D Eulerian chemistry-transport model, which incorporates BC’s well-defined physical and chemical properties. The model includes aerosol-phase chemistry relevant to urban atmospheres, such as desert dust, BC, organic carbon, sea salts, SiO2, metal oxides, SO4²⁻, NO3-, NH4⁺, Na⁺, and Ca²⁺, at a global resolution (2°×2.5°) with primary aerosols only. Our primary objective is to precisely map BC’s spatial and temporal distributions, which is critical for evaluating the long-term impact of absorbing aerosols on net radiative forcing.Using the 4D-Var assimilation method with TROPOMI/GRASP aerosol optical depth (AOD) and aerosol absorption optical depth (AAOD) data, we adjust global-scale emissions at an hourly resolution from March 2019 to November 2020. From a satellite remote sensing perspective, this characterization of aerosols via a single-viewing spectrometer is unprecedented. The GRASP open-source algorithm has generated this novel dataset. The GEOS-Chem model is driven by 3-hourly meteorological fields obtained from GEOS-FP reanalysis data. Our study includes the extreme events of the Australian bushfire season and Canadian forest fire events, where we identify emission sources absent from the GFED3 inventories (1996–2012) used in the forward run. Assimilation of TROPOMI/GRASP AOD and AAOD data into the model allows to reproduce carbonaceous aerosol emissions. These results are validated using MODIS and VIIRS RGB imagery. Ground-level BC concentrations are further validated against in situ measurements from France in the frame of the ANR BLACKNET project and from AERONET. This framework will enable creating a global particulate matter (PM) database with high temporal resolution, spanning several years. Satellite data alone cannot achieve this level of detail. High-resolution BC distribution via inverse modelling will benefit from future spaceborne multi-angular polarimetric sensors, such as 3MI, CO2M MAP, and PACE. Additionally, aerosol vertical distributions will be studied to assess their influence on temperature profiles and atmospheric stability. This work will aid in validating and comparing suborbital measurements. The inverse modelling approach aligns closely with LiDAR-based observations from the EarthCARE mission.

  • Open Access

    A Graph Theory-Based Algorithm for the Reduction of Atmospheric Chemical Mechanisms

    by Forwood Wiser, Siddhartha Sen, Zhizhao Wang, Julia Lee-Taylor, Kelley Barsanti, John Orlando, Daniel Westervelt, Daven Henze, Arlene Fiore, Alexander Berman, et al.

    The atmospheric chemistry of volatile organic compounds (VOC) has a major influence on atmospheric pollutants and particle formation. Accurate modeling of this chemistry is essential for air quality models. Complete representations of VOC oxidation chemistry are far too large for spatiotemporal simulations of the atmosphere, necessitating reduced mechanisms. We present Automated MOdel REduction version 2.0 (AMORE 2.0), an algorithm for the reduction of any VOC oxidation mechanism to a desired size by removing, merging, and rerouting sections of the graph representation of the mechanism. We demonstrate the algorithm on isoprene (398 species) and camphene (100,000 species) chemistry. We remove up to 95% of isoprene species while improving upon prior reduced isoprene mechanisms by 53-67% using a multi-species metric. We remove 99% camphene species while accurately matching camphene secondary organic aerosol production. This algorithm will bridge the gap between large and reduced mechanisms, helping to improve air quality models.

  • Open Access

    Reply on RC2

    by Benjamin Sapper, Daven Henze, Manjula Canagaratna, Harald Stark

    Weighted positive matrix factorization (PMF) has been used by scientists to find small sets of underlying factors in environmental data. However, as the size of the data has grown, increasing computational costs have made it impractical to use traditional methods for this factorization. In this paper, we present a new weighting method to dramatically decrease computational costs for these traditional algorithms. We then apply this weighting method with the Randomized Hierarchical Alternating Least Squares (RHALS) algorithm to a large environmental dataset, where we show that interpretable factors can be reproduced using these methods. We show this algorithm results in a computational speedup of 38, 67, and 634 compared to the Multiplicative Update (MU), deterministic Hierarchical Alternating Least Squares (HALS), and non-negative Alternating Least Squares (ALS) algorithms, respectively. We also investigate rotational ambiguity in the solution, and present a simple “pulling” method to rotate a set of factors. This method is shown to find alternative solutions, and in some cases, lower the weighted residual error of the algorithm.

  • Open Access

    Reply on RC1

    by Benjamin Sapper, Daven Henze, Manjula Canagaratna, Harald Stark

    Weighted positive matrix factorization (PMF) has been used by scientists to find small sets of underlying factors in environmental data. However, as the size of the data has grown, increasing computational costs have made it impractical to use traditional methods for this factorization. In this paper, we present a new weighting method to dramatically decrease computational costs for these traditional algorithms. We then apply this weighting method with the Randomized Hierarchical Alternating Least Squares (RHALS) algorithm to a large environmental dataset, where we show that interpretable factors can be reproduced using these methods. We show this algorithm results in a computational speedup of 38, 67, and 634 compared to the Multiplicative Update (MU), deterministic Hierarchical Alternating Least Squares (HALS), and non-negative Alternating Least Squares (ALS) algorithms, respectively. We also investigate rotational ambiguity in the solution, and present a simple “pulling” method to rotate a set of factors. This method is shown to find alternative solutions, and in some cases, lower the weighted residual error of the algorithm.

  • Open Access

    Comment on egusphere-2022-1221

    by Benjamin Sapper, Daven Henze, Manjula Canagaratna, Harald Stark

    Weighted positive matrix factorization (PMF) has been used by scientists to find small sets of underlying factors in environmental data. However, as the size of the data has grown, increasing computational costs have made it impractical to use traditional methods for this factorization. In this paper, we present a new weighting method to dramatically decrease computational costs for these traditional algorithms. We then apply this weighting method with the Randomized Hierarchical Alternating Least Squares (RHALS) algorithm to a large environmental dataset, where we show that interpretable factors can be reproduced using these methods. We show this algorithm results in a computational speedup of 38, 67, and 634 compared to the Multiplicative Update (MU), deterministic Hierarchical Alternating Least Squares (HALS), and non-negative Alternating Least Squares (ALS) algorithms, respectively. We also investigate rotational ambiguity in the solution, and present a simple “pulling” method to rotate a set of factors. This method is shown to find alternative solutions, and in some cases, lower the weighted residual error of the algorithm.

  • Open Access

    Comment on egusphere-2022-1221

    by Benjamin Sapper, Daven Henze, Manjula Canagaratna, Harald Stark

    Weighted positive matrix factorization (PMF) has been used by scientists to find small sets of underlying factors in environmental data. However, as the size of the data has grown, increasing computational costs have made it impractical to use traditional methods for this factorization. In this paper, we present a new weighting method to dramatically decrease computational costs for these traditional algorithms. We then apply this weighting method with the Randomized Hierarchical Alternating Least Squares (RHALS) algorithm to a large environmental dataset, where we show that interpretable factors can be reproduced using these methods. We show this algorithm results in a computational speedup of 38, 67, and 634 compared to the Multiplicative Update (MU), deterministic Hierarchical Alternating Least Squares (HALS), and non-negative Alternating Least Squares (ALS) algorithms, respectively. We also investigate rotational ambiguity in the solution, and present a simple “pulling” method to rotate a set of factors. This method is shown to find alternative solutions, and in some cases, lower the weighted residual error of the algorithm.

  • Open Access

    Impact of NH3 Emissions on Particulate Matter Pollution in South Korea: A Case Study of the Seoul Metropolitan Area

    by Changsub Shim, Jihyun Han, Daven K. Henze, Mark W. Shephard, Liye Zhu, Nankyoung Moon, Shailesh K. Kharol, Enrico Dammers, Karen Cady-Pereira

    We analyzed the multi-year relationship between particulate matter (PM10 and PM2.5) concentrations and possible precursors including NO2, SO2, and NH3 based on local observations over the Seoul Metropolitan Area (SMA) from 2015 to 2017. Surface NH3 concentrations were obtained from Cross-track Infrared Sounder (CrIS) retrievals, while other pollutants were observed at 142 ground sites. We found that NH3 had the highest correlation with PM2.5 (R = 0.51) compared to other precursors such as NO2 and SO2 (R of 0.16 and 0.14, respectively). The correlations indicate that NH3 emissions are likely a limiting factor in controlling PM2.5 over the SMA in a high-NOx environment. This implies that the current Korean policy urgently requires tools for controlling local NH3 emissions from the livestock industry (for example, from hog manure). These findings provide the first satellite-based trace gas evidence that implementing an NH3 control strategy could play a key role in improving air quality in the SMA.