Bennett C. Larson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bennett C. Larson has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
J. Z. Tischler
Oak Ridge National Laboratory
6 shared publicationsP. Zschack
Argonne National Laboratory
4 shared publicationsG. E. Ice
3 shared publicationsG.E. Ice
Oak Ridge National Laboratory, Metals and Ceramics Division, PO Box 2008, Oak Ridge, TN 37831-6118, USA
3 shared publicationsJ.Z. Tischler
3 shared publications- John D. Budai
Material Science and Technology Division, Oak Ridge National Lab, Oak Ridge, TN, 37831, USA
3 shared publications
Latest Publications
- Open Access
Historical Perspective on Diffraction Line-Profile Analyses for Crystals Containing Defect Clusters
Deviations of crystal diffraction line profiles from those predicted by the dynamical theory of diffraction for perfect crystals provide a window into the microscopic distributions of defects within non-perfect crystals. This overview provides a perspective on key theoretical, computational, and experimental developments associated with the analysis of diffraction line profiles for crystals containing statistical distributions of point defect clusters, e.g., dislocation loops, precipitates, and stacking fault tetrahedra. Pivotal theoretical developments beginning in the 1940s are recalled and discussed in terms of their impact on the direction of theoretical and experimental investigations of lattice defects in the 1960s, the 1970s, and beyond, as both experimental and computational capabilities advanced. The evolution of experimental measurements and analysis techniques, as stimulated by theoretical and computational progress in understanding the distortion fields surrounding defect clusters, is discussed. In particular, consideration is given to determining dislocation loop densities and separate size distributions for vacancy and interstitial type loops, and to the internal strain and size distributions for coherent precipitates.
Open AccessHistorical Perspective on Diffraction Line-Profile Analyses for Crystals Containing Defect Clusters
Deviations of crystal diffraction line profiles from those predicted by the dynamical theory of diffraction for perfect crystals provide a window into the microscopic distributions of defects within non-perfect crystals. This overview provides a perspective on key theoretical, computational, and experimental developments associated with the analysis of diffraction line profiles for crystals containing statistical distributions of point defect clusters, e.g., dislocation loops, precipitates, and stacking fault tetrahedra. Pivotal theoretical developments beginning in the 1940s are recalled and discussed in terms of their impact on the direction of theoretical and experimental investigations of lattice defects in the 1960s, the 1970s, and beyond, as both experimental and computational capabilities advanced. The evolution of experimental measurements and analysis techniques, as stimulated by theoretical and computational progress in understanding the distortion fields surrounding defect clusters, is discussed. In particular, consideration is given to determining dislocation loop densities and separate size distributions for vacancy and interstitial type loops, and to the internal strain and size distributions for coherent precipitates.
- 21 December 2012
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 46 (1) , 153-164
Submicrometre-resolution polychromatic three-dimensional X-ray microscopy
The ability to study the structure, microstructure and evolution of materials with increasing spatial resolution is fundamental to achieving a full understanding of the underlying science of materials. Polychromatic three-dimensional X-ray microscopy (3DXM) is a recently developed nondestructive diffraction technique that enables crystallographic phase identification, determination of local crystal orientations, grain morphologies, grain interface types and orientations, and in favorable cases direct determination of the deviatoric elastic strain tensor with submicrometre spatial resolution in all three dimensions. With the added capability of an energy-scanning incident beam monochromator, the determination of absolute lattice parameters is enabled, allowing specification of the complete elastic strain tensor with three-dimensional spatial resolution. The methods associated with 3DXM are described and key applications of 3DXM are discussed, including studies of deformation in single-crystal and polycrystalline metals and semiconductors, indentation deformation, thermal grain growth in polycrystalline aluminium, the metal–insulator transition in nanoplatelet VO2, interface strengths in metal–matrix composites, high-pressure science, Sn whisker growth, and electromigration processes. Finally, the outlook for future developments associated with this technique is described.
- 21 December 2012
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 46 (1) , 153-164
Submicrometre-resolution polychromatic three-dimensional X-ray microscopy
The ability to study the structure, microstructure and evolution of materials with increasing spatial resolution is fundamental to achieving a full understanding of the underlying science of materials. Polychromatic three-dimensional X-ray microscopy (3DXM) is a recently developed nondestructive diffraction technique that enables crystallographic phase identification, determination of local crystal orientations, grain morphologies, grain interface types and orientations, and in favorable cases direct determination of the deviatoric elastic strain tensor with submicrometre spatial resolution in all three dimensions. With the added capability of an energy-scanning incident beam monochromator, the determination of absolute lattice parameters is enabled, allowing specification of the complete elastic strain tensor with three-dimensional spatial resolution. The methods associated with 3DXM are described and key applications of 3DXM are discussed, including studies of deformation in single-crystal and polycrystalline metals and semiconductors, indentation deformation, thermal grain growth in polycrystalline aluminium, the metal–insulator transition in nanoplatelet VO2, interface strengths in metal–matrix composites, high-pressure science, Sn whisker growth, and electromigration processes. Finally, the outlook for future developments associated with this technique is described.
- 28 November 2011
- Published by American Physical Society (APS) in Physical Review B
- Vol. 84 (19)
Quantitative determination of energy enhanced interlayer transport in pulsed laser deposition of SrTiOWe show that the analysis of single-shot surface x-ray diffraction transients in terms of time-dependent coverages allows quantitative determination of interlayer transport in pulsed-laser deposition of SrTiO. The fast interlayer transport during and immediately after the arrival of the laser plume and before crystallization represents the dominant mechanism for redistribution of the deposited material that is completed on a s-range or faster time scale. Following crystallization interlayer transport is more than four orders of magnitude slower because it is driven only by sluggish thermally activated processes, which represent a small fraction of total interlayer transport that decreases with increasing laser repetition rate. The analysis of growth kinetics shows that it is fast interlayer transport driven by hyperthermal energy species and not thermal annealing that governs layer completion that determines the growth mode and the formation of atomically sharp interfaces in pulsed-laser deposition of epitaxial oxide films and similar energy-enhanced growth processes. DOI: http://dx.doi.org/10.1103/PhysRevB.84.195467 ©2011 American Physical Society- 28 November 2011
- Published by American Physical Society (APS) in Physical Review B
- Vol. 84 (19)
Quantitative determination of energy enhanced interlayer transport in pulsed laser deposition of SrTiOWe show that the analysis of single-shot surface x-ray diffraction transients in terms of time-dependent coverages allows quantitative determination of interlayer transport in pulsed-laser deposition of SrTiO. The fast interlayer transport during and immediately after the arrival of the laser plume and before crystallization represents the dominant mechanism for redistribution of the deposited material that is completed on a s-range or faster time scale. Following crystallization interlayer transport is more than four orders of magnitude slower because it is driven only by sluggish thermally activated processes, which represent a small fraction of total interlayer transport that decreases with increasing laser repetition rate. The analysis of growth kinetics shows that it is fast interlayer transport driven by hyperthermal energy species and not thermal annealing that governs layer completion that determines the growth mode and the formation of atomically sharp interfaces in pulsed-laser deposition of epitaxial oxide films and similar energy-enhanced growth processes. DOI: http://dx.doi.org/10.1103/PhysRevB.84.195467 ©2011 American Physical Society- 1 January 2011
- Published by Elsevier
- p. 239-273
Real-time studies of epitaxial film growth using surface X-ray diffraction (SXRD)
- 1 January 2011
- Published by Elsevier
- p. 239-273
Real-time studies of epitaxial film growth using surface X-ray diffraction (SXRD)
- 31 March 2004
- Published by Elsevier in International Journal of Plasticity
- Vol. 20 (3) , 543-560
Micron-resolution 3-D measurement of local orientations near a grain-boundary in plane-strained aluminum using X-ray microbeams
- 31 March 2004
- Published by Elsevier in International Journal of Plasticity
- Vol. 20 (3) , 543-560
Micron-resolution 3-D measurement of local orientations near a grain-boundary in plane-strained aluminum using X-ray microbeams
- 1 January 2004
- Published by Springer Nature in Journal of Materials Research
- Vol. 19 (01) , 66-72
Deformation microstructure under microindents in single-crystal Cu using three-dimensional x-ray structural microscopy
- 1 January 2004
- Published by Springer Nature in Journal of Materials Research
- Vol. 19 (01) , 66-72
Deformation microstructure under microindents in single-crystal Cu using three-dimensional x-ray structural microscopy
- 6 May 2002
- Published by AIP Publishing in Applied Physics Letters
- Vol. 80 (18) , 3379-3381
Time-resolved study of SrTiO3 homoepitaxial pulsed-laser deposition using surface x-ray diffraction
Homoepitaxy of by pulsed-laser deposition has been studied using in situ time-resolved surface x-ray diffraction in the temperature range of to Using a two-detector configuration, surface x-ray diffraction intensities were monitored simultaneously at the (0 0 specular and the (0 1 off-specular truncation rod positions. Abrupt intensity changes in both the specular and off-specular rods after laser pulses indicated prompt crystallization into layers followed by slower intra- and interlayer surface rearrangements on time scales of seconds. Specular rod intensity oscillations indicated layer-by-layer growth, while off-specular rod intensity measurements suggested the presence of transient in-plane lattice distortions for depositions above- 6 May 2002
- Published by AIP Publishing in Applied Physics Letters
- Vol. 80 (18) , 3379-3381
Time-resolved study of SrTiO3 homoepitaxial pulsed-laser deposition using surface x-ray diffraction
Homoepitaxy of by pulsed-laser deposition has been studied using in situ time-resolved surface x-ray diffraction in the temperature range of to Using a two-detector configuration, surface x-ray diffraction intensities were monitored simultaneously at the (0 0 specular and the (0 1 off-specular truncation rod positions. Abrupt intensity changes in both the specular and off-specular rods after laser pulses indicated prompt crystallization into layers followed by slower intra- and interlayer surface rearrangements on time scales of seconds. Specular rod intensity oscillations indicated layer-by-layer growth, while off-specular rod intensity measurements suggested the presence of transient in-plane lattice distortions for depositions above- 3 May 2001
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 34 (10A) , A82-A86
Double-crystal x-ray diffractometry of single crystals with microdefects
The known method of the `integral' diffuse scattering has been generalized in the Bragg case of x-ray diffraction for crystals, which contain large microdefects commensurable with the extinction length. In the framework of the developed statistical dynamical theory, relatively simple analytical expressions have been derived for coherent and diffuse components of reflectivity of single crystals with randomly distributed microdefects. To test the characterization possibilities of the proposed method, the rocking curves (RCs) of Czochralski-grown silicon single crystal annealed at 1080 °C for 6 h have been measured for 111 and 333 reflections of Cu Kα1 radiation using a high-resolution double-crystal x-ray diffractometer. The fitting results for the two RCs are in good mutual agreement and demonstrate the high information ability of the method.
- 3 May 2001
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 34 (10A) , A82-A86
Double-crystal x-ray diffractometry of single crystals with microdefects
The known method of the `integral' diffuse scattering has been generalized in the Bragg case of x-ray diffraction for crystals, which contain large microdefects commensurable with the extinction length. In the framework of the developed statistical dynamical theory, relatively simple analytical expressions have been derived for coherent and diffuse components of reflectivity of single crystals with randomly distributed microdefects. To test the characterization possibilities of the proposed method, the rocking curves (RCs) of Czochralski-grown silicon single crystal annealed at 1080 °C for 6 h have been measured for 111 and 333 reflections of Cu Kα1 radiation using a high-resolution double-crystal x-ray diffractometer. The fitting results for the two RCs are in good mutual agreement and demonstrate the high information ability of the method.
- 5 October 2000
- Published by Wiley in Advanced Engineering Materials
- Vol. 2 (10) , 643-646
3D X-Ray Crystal Microscope
- 5 October 2000
- Published by Wiley in Advanced Engineering Materials
- Vol. 2 (10) , 643-646
3D X-Ray Crystal Microscope
- 1 January 1999
- Published by Springer Nature in MRS Proceedings
- Vol. 590
3-D Measurement of Deformation Microstructure in Al(0.2%)Mg Using Submicron Resolution White x-ray Microbeams
- 1 January 1999
- Published by Springer Nature in MRS Proceedings
- Vol. 590
3-D Measurement of Deformation Microstructure in Al(0.2%)Mg Using Submicron Resolution White x-ray Microbeams