Merih Sarıışık
Merih Sarıışık has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Gizem Ceylan Türkoğlu
Department of Textile Engineering, Faculty of Engineering, Dokuz Eylul University, İzmir, Türkiye
2 shared publications Gökhan Erkan
Department of Textile Engineering, Faculty of Engineering, Dokuz Eylül University, Tınaztepe Campus, İzmir, Turkey
2 shared publications- Gökhan Erkan
DOKUZ EYLUL UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF TEXTILE ENGINEERING, TEXTILE ENGINEERING PR
2 shared publications Sinem Yaprak Karavana
Department of Pharmaceutical Technology, Faculty of Pharmacy, Ege University, Izmir, Turkey
2 shared publications- Aylin Ziylan Albayrak
Department of Metallurgical and Materials Engineering, Faculty of Engineering, Dokuz Eylül University, İzmir, Turkey
1 shared publication Bahadır Güneşoğlu
ROTEKS Tekstil İhracat Sanayi ve Ticaret A.Ş., İzmir, Turkey
1 shared publication
Latest Publications
- Open Access
- 31 December 2023
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 30 (132) , 318-326
LAYER-BY-LAYER SELF-ASSEMBLY APPROACH IN THE UV PROTECTIVE MODIFICATION OF ARAMID-BASED MATERIALS
This paper presents the Layer by Layer self-assembly (LbL) approach for developing the UV resistance of aramid yarns. Initially, a pretreatment was achieved by polyethyleneimine to obtain cationic surface charges on aramid yarns. Then zinc oxide and titanium dioxide nanoparticles were self-assembled on these yarns by the LbL process. The findings revealed that the LbL nano coatings significantly improved the UV resistance and tensile properties of the aramid yarns. This study highlights the unique opportunities offered by the LbL methodology to both modify aramid-based materials in mild conditions and provide an effective UV protection.
- 31 December 2023
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 30 (132) , 318-326
Open AccessLAYER-BY-LAYER SELF-ASSEMBLY APPROACH IN THE UV PROTECTIVE MODIFICATION OF ARAMID-BASED MATERIALS
This paper presents the Layer by Layer self-assembly (LbL) approach for developing the UV resistance of aramid yarns. Initially, a pretreatment was achieved by polyethyleneimine to obtain cationic surface charges on aramid yarns. Then zinc oxide and titanium dioxide nanoparticles were self-assembled on these yarns by the LbL process. The findings revealed that the LbL nano coatings significantly improved the UV resistance and tensile properties of the aramid yarns. This study highlights the unique opportunities offered by the LbL methodology to both modify aramid-based materials in mild conditions and provide an effective UV protection.
- 17 January 2023
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 33 (2) , 185-196
Improving Washable Woolen Fabric By Using Layer-By-Layer Coating
There are many different methods used in the industry to improve the antifelting and shrinkproof properties of wool blended fabrics. In the study, Layer-by-Layer technique used to improve the antifelting and shrinkproof properties of wool blended fabrics as an effective nanofabrication method according to the literature. Different polyelectrolytes and nano-polyurethane were applied on ecru and light, medium, dark color dyed suit wool blended fabrics by using Layer-by-Layer method. After the application fabrics, relaxation and felting shrinkage, breaking and tear strength tests and color/strength measurements were performed. Besides, the effect of squeezing roller velocity and pressure on the fabrics were evaluated. It is ensured that the relaxation and felting shrinkage values are within ± 3%. It has been observed that soft handle fabrics are obtained after coating without any negative effect on the fabric. In addition, SEM-EDX and FTIR-ATR analysis were performed to determine the surface properties of the fabrics and bond characterization of the films.
- 17 January 2023
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 33 (2) , 185-196
Improving Washable Woolen Fabric By Using Layer-By-Layer Coating
There are many different methods used in the industry to improve the antifelting and shrinkproof properties of wool blended fabrics. In the study, Layer-by-Layer technique used to improve the antifelting and shrinkproof properties of wool blended fabrics as an effective nanofabrication method according to the literature. Different polyelectrolytes and nano-polyurethane were applied on ecru and light, medium, dark color dyed suit wool blended fabrics by using Layer-by-Layer method. After the application fabrics, relaxation and felting shrinkage, breaking and tear strength tests and color/strength measurements were performed. Besides, the effect of squeezing roller velocity and pressure on the fabrics were evaluated. It is ensured that the relaxation and felting shrinkage values are within ± 3%. It has been observed that soft handle fabrics are obtained after coating without any negative effect on the fabric. In addition, SEM-EDX and FTIR-ATR analysis were performed to determine the surface properties of the fabrics and bond characterization of the films.
- 19 July 2022
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 34 (6) , 919-932
Providing antibacterial properties to denim and non-denim trousers with encapsulation technology
Purpose: The aim was to prepare antibacterial microcapsules and transferred to denim and non-denim (canvas) trousers.Design/methodology/approach: For this purpose, lavender and sweet almond oil as active agents were encapsulated with ethylcellulose shell with a spray dryer method and carried out capsule optimization studies.Findings: The particle diameter of the capsules ranged between 0.61 and 8.76 µm, SPAN value was 1.608 and the mean particle size was 4 µm. The mass yields of capsules ranged between 35.0 and 75.4 %w/w. Denim fabrics were treated with prepared capsules by exhaustion and spraying methods. It was seen that microcapsules provided a reduction of bacteria by over 97% against both Staphylococcus aureus and Escherichia coli and the fabrics still showed an antibacterial effect after five washing cycles.Originality/value: When application methods were compared, the spraying method was found to be more sustainable process than exhaustion and could be used as an alternative for reducing energy consumption and capsules could provide antibacterial properties to the fabrics.
- 19 July 2022
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 34 (6) , 919-932
Providing antibacterial properties to denim and non-denim trousers with encapsulation technology
Purpose: The aim was to prepare antibacterial microcapsules and transferred to denim and non-denim (canvas) trousers.Design/methodology/approach: For this purpose, lavender and sweet almond oil as active agents were encapsulated with ethylcellulose shell with a spray dryer method and carried out capsule optimization studies.Findings: The particle diameter of the capsules ranged between 0.61 and 8.76 µm, SPAN value was 1.608 and the mean particle size was 4 µm. The mass yields of capsules ranged between 35.0 and 75.4 %w/w. Denim fabrics were treated with prepared capsules by exhaustion and spraying methods. It was seen that microcapsules provided a reduction of bacteria by over 97% against both Staphylococcus aureus and Escherichia coli and the fabrics still showed an antibacterial effect after five washing cycles.Originality/value: When application methods were compared, the spraying method was found to be more sustainable process than exhaustion and could be used as an alternative for reducing energy consumption and capsules could provide antibacterial properties to the fabrics.
- 15 June 2022
- Published by Wiley in Flavour and Fragrance Journal
- Vol. 37 (5) , 265-273
Development of antibacterial textiles by cyclodextrin inclusion complexes of volatile thyme active agents
The study aims to develop wash‐resistant antibacterial cotton fabrics without using synthetic chemicals. Therefore, natural active agents of thyme, thymol and carvacrol were selected. The inclusion complexes were formed with β‐cyclodextrin using kneading method which is a simple and reproducible method for the encapsulation with high production yield. Differential scanning calorimeter analysis showed that 1:1 and 1:2 β‐CD: Guest Molecule (M:M) for thymol and carvacrol from different ratios studied has the highest complexation degree as 50% and 100%, respectively. It is also revealed that the volatile agents are retained and showed better thermal stability as a result of complexation. Carvacrol inclusion complexes were found relatively more stable (Zeta potential: −28.2 mV) than thymol complexes with smaller particle sizes (204.9 nm). Chemical structures of the inclusion complexes were revealed with Fourier transform‐infrared spectroscopy and nuclear magnetic resonance analyses. The optimum formulations for each active agent were applied to cotton fabrics as per the impregnation method and the capsule treated fabrics were washed 1, 10 and 20 times. The images exhibited the presence of inclusion complexes on the fabrics after 20 washing cycles. Although the antibacterial efficacy of fabrics decreased with increasing washing, the fabrics showed the antibacterial effect after 20 washes against Klebsiella pneumoniae and Staphylococcus aureus. This study showed that the developed products can be an alternative to the other products in the market as the long‐lasting fragrant natural antibacterial.
- 15 June 2022
- Published by Wiley in Flavour and Fragrance Journal
- Vol. 37 (5) , 265-273
Development of antibacterial textiles by cyclodextrin inclusion complexes of volatile thyme active agents
The study aims to develop wash‐resistant antibacterial cotton fabrics without using synthetic chemicals. Therefore, natural active agents of thyme, thymol and carvacrol were selected. The inclusion complexes were formed with β‐cyclodextrin using kneading method which is a simple and reproducible method for the encapsulation with high production yield. Differential scanning calorimeter analysis showed that 1:1 and 1:2 β‐CD: Guest Molecule (M:M) for thymol and carvacrol from different ratios studied has the highest complexation degree as 50% and 100%, respectively. It is also revealed that the volatile agents are retained and showed better thermal stability as a result of complexation. Carvacrol inclusion complexes were found relatively more stable (Zeta potential: −28.2 mV) than thymol complexes with smaller particle sizes (204.9 nm). Chemical structures of the inclusion complexes were revealed with Fourier transform‐infrared spectroscopy and nuclear magnetic resonance analyses. The optimum formulations for each active agent were applied to cotton fabrics as per the impregnation method and the capsule treated fabrics were washed 1, 10 and 20 times. The images exhibited the presence of inclusion complexes on the fabrics after 20 washing cycles. Although the antibacterial efficacy of fabrics decreased with increasing washing, the fabrics showed the antibacterial effect after 20 washes against Klebsiella pneumoniae and Staphylococcus aureus. This study showed that the developed products can be an alternative to the other products in the market as the long‐lasting fragrant natural antibacterial.
- 4 June 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (30)
UV curing: An alternative method for fixation of β‐carotene containing microparticles substances onto cotton fabrics by acrylic binder
Capsulation technology is one of the methods that have been utilized for gaining various functional properties of textile materials. With the technology, in recent years, textile materials have been made to exhibit functions such as vitamins, fragrances, moistening effect, insect repellent, and anti‐cellulite. To establish permanent bonding between capsule‐based materials and textile materials, which also provides efficiency against washing, crosslinking agents are used. Commercial capsules are applied to a fabric by using acrylics or polyurethanes as the cross‐linker at a drying temperature of around 100°C and thermo‐fixation conditions are between 110 and 130°C. The capsules used for fragrance and aromatherapy applications, which contain volatile oil, can be affected in high‐temp conditions that cause evaporation and degradation of active ingredient. In this study, beta‐carotene as the active ingredient was dispersed within ethyl cellulose via spray drying first and then applied to textile materials to maintain the tanning effect. Besides thermal curing, the UV curing process with different photoinitiators will be utilized for the fixation of capsules onto textile materials. Hence, the UV curing technique will be used as an alternative to the thermal fixing of conventional cross‐linkers. After application of the capsules onto textile materials, characterization, and various efficiency tests such as color measurement, X‐ray diffraction, thermogravimetric analysis were performed. As a result, textiles containing β‐carotene microparticles that are resistant to 10 washing cycles were produced. Moreover, all the β‐carotene fixed fabric showed antioxidant activity and thermal stability. Consequently, it could be said that the UV curing process on textile materials can be an alternative curing process to the thermal curing process.
- 4 June 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (30)
UV curing: An alternative method for fixation of β‐carotene containing microparticles substances onto cotton fabrics by acrylic binder
Capsulation technology is one of the methods that have been utilized for gaining various functional properties of textile materials. With the technology, in recent years, textile materials have been made to exhibit functions such as vitamins, fragrances, moistening effect, insect repellent, and anti‐cellulite. To establish permanent bonding between capsule‐based materials and textile materials, which also provides efficiency against washing, crosslinking agents are used. Commercial capsules are applied to a fabric by using acrylics or polyurethanes as the cross‐linker at a drying temperature of around 100°C and thermo‐fixation conditions are between 110 and 130°C. The capsules used for fragrance and aromatherapy applications, which contain volatile oil, can be affected in high‐temp conditions that cause evaporation and degradation of active ingredient. In this study, beta‐carotene as the active ingredient was dispersed within ethyl cellulose via spray drying first and then applied to textile materials to maintain the tanning effect. Besides thermal curing, the UV curing process with different photoinitiators will be utilized for the fixation of capsules onto textile materials. Hence, the UV curing technique will be used as an alternative to the thermal fixing of conventional cross‐linkers. After application of the capsules onto textile materials, characterization, and various efficiency tests such as color measurement, X‐ray diffraction, thermogravimetric analysis were performed. As a result, textiles containing β‐carotene microparticles that are resistant to 10 washing cycles were produced. Moreover, all the β‐carotene fixed fabric showed antioxidant activity and thermal stability. Consequently, it could be said that the UV curing process on textile materials can be an alternative curing process to the thermal curing process.
- 1 October 2021
- Published by Elsevier in Carbohydrate Polymers
- Vol. 269, 118287
Production of wheat germ oil containing multilayer hydrogel dressing
- 1 October 2021
- Published by Elsevier in Carbohydrate Polymers
- Vol. 269, 118287
Production of wheat germ oil containing multilayer hydrogel dressing
- 18 January 2020
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 29 (2) , 117-132
Photochromic microcapsules by coacervation and in situ polymerization methods for product-marking applications
- 18 January 2020
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 29 (2) , 117-132
Photochromic microcapsules by coacervation and in situ polymerization methods for product-marking applications
- 19 April 2013
- Published by SAGE Publications in Textile Research Journal
- Vol. 83 (10) , 1030-1043
Design of orthopedic support material containing diclofenac sodium microparticles: preparation and characterization of microparticles and application to orthopedic support material
The aim of this study is preparation and characterization of diclofenac sodium microparticles and their application to the orthopedic support materials. The microparticles were obtained using spray drying method involving ethyl cellulose as shell material. The morphology, particle size, drug loading capacity and in vitro release characteristics of the drug microparticles were optimized for impregnation diclofenac sodium microparticles onto the orthopedic support materials. Scanning electron microscopy (SEM) was used to characterize the drug microparticles and the treated fabrics with microparticles. SEM images illustrated that the microparticles were spherical in shape and also fixed onto the orthopedic support materials. Furthermore, the resistance of materials containing microparticles to washing were also investigated. Finally, in vitro drug release studies of microparticles and textile impregnated with microparticles were done. This study suggested that textile systems containing diclofenac sodium microparticles could have a potential for long-term therapy for rheumatic disorders.
- 19 April 2013
- Published by SAGE Publications in Textile Research Journal
- Vol. 83 (10) , 1030-1043
Design of orthopedic support material containing diclofenac sodium microparticles: preparation and characterization of microparticles and application to orthopedic support material
The aim of this study is preparation and characterization of diclofenac sodium microparticles and their application to the orthopedic support materials. The microparticles were obtained using spray drying method involving ethyl cellulose as shell material. The morphology, particle size, drug loading capacity and in vitro release characteristics of the drug microparticles were optimized for impregnation diclofenac sodium microparticles onto the orthopedic support materials. Scanning electron microscopy (SEM) was used to characterize the drug microparticles and the treated fabrics with microparticles. SEM images illustrated that the microparticles were spherical in shape and also fixed onto the orthopedic support materials. Furthermore, the resistance of materials containing microparticles to washing were also investigated. Finally, in vitro drug release studies of microparticles and textile impregnated with microparticles were done. This study suggested that textile systems containing diclofenac sodium microparticles could have a potential for long-term therapy for rheumatic disorders.
- 15 July 2010
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (6) , 3707-3714
The microencapsulation of terbinafine via in situ polymerization of melamine‐formaldehyde and their application to cotton fabric
In this study an antifungal pharmaceutical agent, terbinafine, was microencapsulated by using in situ polymerization. The polymerization was carried out at four mole ratio level and preparations were applied to the 100% cotton fabric. X‐ray diffractometry, DSC, FTIR, BET, contact angle measurements, particle size distribution and imaging techniques were performed. Best results were obtained in the case of 8 : 1 mole ratio. Strength of microcapsule applied fabrics to washing and fungus were also determined. After 25 washing cycle, microcapsules were still in the fabric and had antifungal properties against A. niger. Antifungal strength against T. rubrum was observed up to 15 washing cycles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
- 15 July 2010
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (6) , 3707-3714
The microencapsulation of terbinafine via in situ polymerization of melamine‐formaldehyde and their application to cotton fabric
In this study an antifungal pharmaceutical agent, terbinafine, was microencapsulated by using in situ polymerization. The polymerization was carried out at four mole ratio level and preparations were applied to the 100% cotton fabric. X‐ray diffractometry, DSC, FTIR, BET, contact angle measurements, particle size distribution and imaging techniques were performed. Best results were obtained in the case of 8 : 1 mole ratio. Strength of microcapsule applied fabrics to washing and fungus were also determined. After 25 washing cycle, microcapsules were still in the fabric and had antifungal properties against A. niger. Antifungal strength against T. rubrum was observed up to 15 washing cycles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
- 16 July 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 93 (6) , 2903-2908
Application of enzymes and chitosan biopolymer to the antifelting finishing process
We surveyed environmentally friendly chemicals and mild processes that could be used to avoid the high absorbable organic halogen compounds (AOX) load and damage to the environment from the waste of wool plants. In this research, we sought to achieve a new zero‐AOX processing alternative to conventional processes such as chlorine/Hercosett processing and thus use environmentally friendly enzymes and chitosan as a biopolymer. We studied enzymatic, oxidative, and additive processes and various combinations of them to improve the shrink‐proofing and antifelting properties of wool. We performed our experiments with enzymatic treatments using commercial protease preparations, such as Perizym AFW, Alcalase 2.5L, Savinase 16L, and papain. The oxidative agents were hydrogen peroxide and sodium hypochloride, and the additive agents were based on polyurethane, polysiloxane, and silicone, as well as chitosan, a hydrophilic and natural polymer. We attempted to determine the agent or combination that best improved the shrink‐proofing properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2903–2908, 2004
- 16 July 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 93 (6) , 2903-2908
Application of enzymes and chitosan biopolymer to the antifelting finishing process
We surveyed environmentally friendly chemicals and mild processes that could be used to avoid the high absorbable organic halogen compounds (AOX) load and damage to the environment from the waste of wool plants. In this research, we sought to achieve a new zero‐AOX processing alternative to conventional processes such as chlorine/Hercosett processing and thus use environmentally friendly enzymes and chitosan as a biopolymer. We studied enzymatic, oxidative, and additive processes and various combinations of them to improve the shrink‐proofing and antifelting properties of wool. We performed our experiments with enzymatic treatments using commercial protease preparations, such as Perizym AFW, Alcalase 2.5L, Savinase 16L, and papain. The oxidative agents were hydrogen peroxide and sodium hypochloride, and the additive agents were based on polyurethane, polysiloxane, and silicone, as well as chitosan, a hydrophilic and natural polymer. We attempted to determine the agent or combination that best improved the shrink‐proofing properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2903–2908, 2004