Qun Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qun Zhang has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
- Jianwen Yang
Shanghai Normal University
10 shared publications Dong Lin
8 shared publications- Ting-Chang Chang
School of Electronic and Computer Engineering, Peking University, Shenzhen, China
6 shared publications Yanbing Han
Materials Science Center, National Renewable Energy Laboratory, Golden, Colorado 80401, USA
6 shared publicationsJinhua Ren
5 shared publicationsRuofan Fu
Fudan University
5 shared publications
Latest Publications
- 20 May 2022
- Published by Wiley
- p. 553-575
Tungsten‐Doped Active Layers for High‐Mobility AOS‐TFTs
- 12 November 2021
- Published by Wiley in Advanced Materials Interfaces
- Vol. 8 (24) , 2101166
A Multifunctional Flexible Ferroelectric Transistor Sensor for Electronic Skin
Electronic skin (E‐skin) is a device that mimics the functions of human skin and is attracting more and more attention as a novel platform for human–machine interaction, health diagnostics, therapeutics, robotics, prosthesis, and monitoring. Here, a flexible ferroelectric field‐effect transistor (FeFET) is developed as a multifunctional sensor prototype for electronic skin. Ferroelectric poly(vinylidene fluoride trifluoroethylene) and amorphous tungsten‐doped indium oxide are utilized to construct the FeFET. The device possesses three‐in‐one sensing performance. It can monitor external stress with a linear sensitivity of 4.6 nA kPa −1 in broad pressure range between 50 Pa and 150 kPa and detect temperature change between 0 and 70 °C. Electrostatic interaction further endows the device with proximity sensing function to perceive the approach of a charged object. The device is further developed for detection of a human's physiological signals, such as pulsation and respiration, and finger's action. It shows good bending endurance which maintains its transfer characteristic after 1000 cycles of bending operation. Moreover, the device's responses to both temperature change and charged objects are investigated when it is under bending condition with radius of curvature down to 1.09 mm. This multifunctional sensor prototype is expected to contribute to the next‐generation E‐skin.
- 12 November 2021
- Published by Wiley in Advanced Materials Interfaces
- Vol. 8 (24) , 2101166
A Multifunctional Flexible Ferroelectric Transistor Sensor for Electronic Skin
Electronic skin (E‐skin) is a device that mimics the functions of human skin and is attracting more and more attention as a novel platform for human–machine interaction, health diagnostics, therapeutics, robotics, prosthesis, and monitoring. Here, a flexible ferroelectric field‐effect transistor (FeFET) is developed as a multifunctional sensor prototype for electronic skin. Ferroelectric poly(vinylidene fluoride trifluoroethylene) and amorphous tungsten‐doped indium oxide are utilized to construct the FeFET. The device possesses three‐in‐one sensing performance. It can monitor external stress with a linear sensitivity of 4.6 nA kPa −1 in broad pressure range between 50 Pa and 150 kPa and detect temperature change between 0 and 70 °C. Electrostatic interaction further endows the device with proximity sensing function to perceive the approach of a charged object. The device is further developed for detection of a human's physiological signals, such as pulsation and respiration, and finger's action. It shows good bending endurance which maintains its transfer characteristic after 1000 cycles of bending operation. Moreover, the device's responses to both temperature change and charged objects are investigated when it is under bending condition with radius of curvature down to 1.09 mm. This multifunctional sensor prototype is expected to contribute to the next‐generation E‐skin.
- 12 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (2) , 556-559
Degradation Behavior of Etch-Stopper-Layer Structured a-InGaZnO Thin-Film Transistors Under Hot-Carrier Stress and Illumination
Etch-stopper-layer (ESL) structured amorphous InGaZnO thin-film transistors (a-IGZO TFTs) were fabricated in this article. Degradation behavior of the a-IGZO TFTs under hot-carrier stress and illumination (HCIS) was investigated. As HCIS time increases, the transfer curve in the saturation region shifts in the negative direction under the forward-operation mode, whereas it shifts in the positive direction under the reverse-operation mode. The HCIS-induced degradation behavior was attributed to charge trapping in the IGZO/ESL interface. To examine the degradation mechanism, the capacitance–voltage measurements were performed. After applying HCIS, it is found that the gate-to-drain capacitance curve shifts in the positive direction and the gate-to-source capacitance curve exhibits two-stage rises. Technology computer-aided design (TCAD) was used to simulate the electric field distribution during the stress, which also confirmed the proposed mechanism.
- 12 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (2) , 556-559
Degradation Behavior of Etch-Stopper-Layer Structured a-InGaZnO Thin-Film Transistors Under Hot-Carrier Stress and Illumination
Etch-stopper-layer (ESL) structured amorphous InGaZnO thin-film transistors (a-IGZO TFTs) were fabricated in this article. Degradation behavior of the a-IGZO TFTs under hot-carrier stress and illumination (HCIS) was investigated. As HCIS time increases, the transfer curve in the saturation region shifts in the negative direction under the forward-operation mode, whereas it shifts in the positive direction under the reverse-operation mode. The HCIS-induced degradation behavior was attributed to charge trapping in the IGZO/ESL interface. To examine the degradation mechanism, the capacitance–voltage measurements were performed. After applying HCIS, it is found that the gate-to-drain capacitance curve shifts in the positive direction and the gate-to-source capacitance curve exhibits two-stage rises. Technology computer-aided design (TCAD) was used to simulate the electric field distribution during the stress, which also confirmed the proposed mechanism.
- Open Access
- 1 January 2021
- Published by Medknow in Neural Regeneration Research
- Vol. 16 (12) , 2512-2520
Environmental enrichment combined with fasudil promotes motor function recovery and axonal regeneration after stroke
Fasudil, a Rho-associated protein kinase (ROCK) inhibitor, has a protective effect on the central nervous system. In addition, environmental enrichment is a promising technique for inducing the recovery of motor impairments in ischemic stroke models. The present study aimed to explore whether environmental enrichment combined with fasudil can facilitate motor function recovery and induce cortical axonal regeneration after stroke. First, a mouse model of ischemic cerebral stroke was established by photochemical embolization of the left sensorimotor cortex. Fasudil solution (10 mg/kg per day) was injected intraperitoneally for 21 days after the photothrombotic stroke. An environmental enrichment intervention was performed on days 7-21 after the photothrombotic stroke. The results revealed that environmental enrichment combined with fasudil improved motor function, increased growth-associated protein 43 expression in the infarcted cerebral cortex, promoted axonal regeneration on the contralateral side, and downregulated ROCK, p-LIM domain kinase (LIMK)1, and p-cofilin expression. The combined intervention was superior to monotherapy. These findings suggest that environmental enrichment combined with fasudil treatment promotes motor recovery after stroke, at least partly by stimulating axonal regeneration. The underlying mechanism might involve ROCK/LIMK1/cofilin pathway regulation. This study was approved by the Institutional Animal Care and Use Committee of Fudan University, China (approval No. 20160858A232) on February 24, 2016.
- 1 January 2021
- Published by Medknow in Neural Regeneration Research
- Vol. 16 (12) , 2512-2520
Open AccessEnvironmental enrichment combined with fasudil promotes motor function recovery and axonal regeneration after stroke
Fasudil, a Rho-associated protein kinase (ROCK) inhibitor, has a protective effect on the central nervous system. In addition, environmental enrichment is a promising technique for inducing the recovery of motor impairments in ischemic stroke models. The present study aimed to explore whether environmental enrichment combined with fasudil can facilitate motor function recovery and induce cortical axonal regeneration after stroke. First, a mouse model of ischemic cerebral stroke was established by photochemical embolization of the left sensorimotor cortex. Fasudil solution (10 mg/kg per day) was injected intraperitoneally for 21 days after the photothrombotic stroke. An environmental enrichment intervention was performed on days 7-21 after the photothrombotic stroke. The results revealed that environmental enrichment combined with fasudil improved motor function, increased growth-associated protein 43 expression in the infarcted cerebral cortex, promoted axonal regeneration on the contralateral side, and downregulated ROCK, p-LIM domain kinase (LIMK)1, and p-cofilin expression. The combined intervention was superior to monotherapy. These findings suggest that environmental enrichment combined with fasudil treatment promotes motor recovery after stroke, at least partly by stimulating axonal regeneration. The underlying mechanism might involve ROCK/LIMK1/cofilin pathway regulation. This study was approved by the Institutional Animal Care and Use Committee of Fudan University, China (approval No. 20160858A232) on February 24, 2016.
- 7 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (6) , 2372-2375
Effects of Redundant Electrode Width on Stability of a-InGaZnO Thin-Film Transistors Under Hot-Carrier Stress
In this article, the effects of redundant electrode width on stability of inverted staggered via-contact structured amorphous indium gallium zinc oxide thin-film transistors (a-IGZO TFTs) under hot-carrier stress (HCS) were investigated. It is found that devices with a larger redundant electrode width have a severer degradation behavior after HCS. Capacitance-voltage measurements were conducted to study the degradation mechanism and technology computer-aided design (TCAD) simulation was employed to understand the different degradation behaviors.
- 7 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (6) , 2372-2375
Effects of Redundant Electrode Width on Stability of a-InGaZnO Thin-Film Transistors Under Hot-Carrier Stress
In this article, the effects of redundant electrode width on stability of inverted staggered via-contact structured amorphous indium gallium zinc oxide thin-film transistors (a-IGZO TFTs) under hot-carrier stress (HCS) were investigated. It is found that devices with a larger redundant electrode width have a severer degradation behavior after HCS. Capacitance-voltage measurements were conducted to study the degradation mechanism and technology computer-aided design (TCAD) simulation was employed to understand the different degradation behaviors.
- 8 January 2020
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 13 (1) , 014012
Templated Growth of Metastable Polymorphs on Amorphous Substrates with Seed Layers
Metastable inorganic materials with unique properties are important in many practical applications, but their synthesis is often challenging. In physics, epitaxial stabilization, also known as pseudomorphic growth, is used to synthesize metastable polymorphs, but usually only as very thin films and on expensive single-crystal substrates. In chemistry, the templated growth of inorganic solid-state materials on self-assembled monolayers of organic molecules is reported. Bridging these two fields, here, we show that the synthesis of metastable polymorphs is possible up to large film thickness on amorphous substrates covered with thin inorganic seed layers that serve as templates. The stabilization of a 500-nm-thick metastable wurtzite (WZ) film by a 5-nm-thick seed layer sputtered on amorphous glass substrates is experimentally demonstrated. Theoretical calculations explain this experimental observation by the small WZ polymorph energy relative to that of the ground-state nickeline (NC) structure of and a large lattice constant difference of the two. The resulting metastable WZ- polymorph exhibits a wide band gap of 2.7 eV and a low hole density of , which is relevant to optoelectronic applications. These properties are in sharp contrast to those of the narrow-band-gap highly doped NC- with 1.3 eV band gap and hole density. The difference in hole density is due to the calculated difference in the formation energy of manganese vacancy acceptor defects. Overall, these results suggest that templated growth on amorphous substrates with seed layers can be used to synthesize metastable polymorphs of other materials, without the need for expensive single-crystal substrates.- 8 January 2020
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 13 (1) , 014012
Templated Growth of Metastable Polymorphs on Amorphous Substrates with Seed Layers
Metastable inorganic materials with unique properties are important in many practical applications, but their synthesis is often challenging. In physics, epitaxial stabilization, also known as pseudomorphic growth, is used to synthesize metastable polymorphs, but usually only as very thin films and on expensive single-crystal substrates. In chemistry, the templated growth of inorganic solid-state materials on self-assembled monolayers of organic molecules is reported. Bridging these two fields, here, we show that the synthesis of metastable polymorphs is possible up to large film thickness on amorphous substrates covered with thin inorganic seed layers that serve as templates. The stabilization of a 500-nm-thick metastable wurtzite (WZ) film by a 5-nm-thick seed layer sputtered on amorphous glass substrates is experimentally demonstrated. Theoretical calculations explain this experimental observation by the small WZ polymorph energy relative to that of the ground-state nickeline (NC) structure of and a large lattice constant difference of the two. The resulting metastable WZ- polymorph exhibits a wide band gap of 2.7 eV and a low hole density of , which is relevant to optoelectronic applications. These properties are in sharp contrast to those of the narrow-band-gap highly doped NC- with 1.3 eV band gap and hole density. The difference in hole density is due to the calculated difference in the formation energy of manganese vacancy acceptor defects. Overall, these results suggest that templated growth on amorphous substrates with seed layers can be used to synthesize metastable polymorphs of other materials, without the need for expensive single-crystal substrates.- 1 January 2020
- Published by IOP Publishing in Chinese Physics B
- Vol. 29 (1) , 018502
High-throughput fabrication and semi-automated characterization of oxide thin film transistors
High throughput experimental methods are known to accelerate the rate of research, development, and deployment of electronic materials. For example, thin films with lateral gradients in composition, thickness, or other parameters have been used alongside spatially-resolved characterization to assess how various physical factors affect the material properties under varying measurement conditions. Similarly, multi-layer electronic devices that contain such graded thin films as one or more of their layers can also be characterized spatially in order to optimize the performance. In this work, we apply these high throughput experimental methods to thin film transistors (TFTs), demonstrating combinatorial channel layer growth, device fabrication, and semi-automated characterization using sputtered oxide TFTs as a case study. We show that both extrinsic and intrinsic types of device gradients can be generated in a TFT library, such as channel thickness and length, channel cation compositions, and oxygen atmosphere during deposition. We also present a semi-automated method to measure the 44 devices fabricated on a 50 mm×50 mm substrate that can help to identify properly functioning TFTs in the library and finish the measurement in a short time. Finally, we propose a fully automated characterization system for similar TFT libraries, which can be coupled with high throughput data analysis. These results demonstrate that high throughput methods can accelerate the investigation of TFTs and other electronic devices.
- 1 January 2020
- Published by IOP Publishing in Chinese Physics B
- Vol. 29 (1) , 018502
High-throughput fabrication and semi-automated characterization of oxide thin film transistors
High throughput experimental methods are known to accelerate the rate of research, development, and deployment of electronic materials. For example, thin films with lateral gradients in composition, thickness, or other parameters have been used alongside spatially-resolved characterization to assess how various physical factors affect the material properties under varying measurement conditions. Similarly, multi-layer electronic devices that contain such graded thin films as one or more of their layers can also be characterized spatially in order to optimize the performance. In this work, we apply these high throughput experimental methods to thin film transistors (TFTs), demonstrating combinatorial channel layer growth, device fabrication, and semi-automated characterization using sputtered oxide TFTs as a case study. We show that both extrinsic and intrinsic types of device gradients can be generated in a TFT library, such as channel thickness and length, channel cation compositions, and oxygen atmosphere during deposition. We also present a semi-automated method to measure the 44 devices fabricated on a 50 mm×50 mm substrate that can help to identify properly functioning TFTs in the library and finish the measurement in a short time. Finally, we propose a fully automated characterization system for similar TFT libraries, which can be coupled with high throughput data analysis. These results demonstrate that high throughput methods can accelerate the investigation of TFTs and other electronic devices.
- 13 December 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 53 (8) , 085104
Abnormal threshold voltage shift caused by trapped holes under hot-carrier stress in a-IGZO TFTs
In the investigation of the reliability of a back-channel-etching type amorphous InGaZnO thin film transistor, we found that hot carrier stress has caused an abnormal parallel negative threshold voltage shift in the I D – V G measurement. An electrical measurement method named drain stress was established to investigate this instability. Through the analysis of recovery behavior, gate bias stress and Silvaco simulation, we confirmed that holes from the drain side inject into the passivation layer and/or back-channel interface region rather than into the gate insulator under the transverse electric field. A physical model is proposed to verify this electrical degradation behavior. This work demonstrates that drain stress is valuable in examining the quality of the passivation layer in thin film transistors.
- 13 December 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 53 (8) , 085104
Abnormal threshold voltage shift caused by trapped holes under hot-carrier stress in a-IGZO TFTs
In the investigation of the reliability of a back-channel-etching type amorphous InGaZnO thin film transistor, we found that hot carrier stress has caused an abnormal parallel negative threshold voltage shift in the I D – V G measurement. An electrical measurement method named drain stress was established to investigate this instability. Through the analysis of recovery behavior, gate bias stress and Silvaco simulation, we confirmed that holes from the drain side inject into the passivation layer and/or back-channel interface region rather than into the gate insulator under the transverse electric field. A physical model is proposed to verify this electrical degradation behavior. This work demonstrates that drain stress is valuable in examining the quality of the passivation layer in thin film transistors.
- 1 November 2019
- Published by Elsevier in Applied Surface Science
- Vol. 493, 63-69
Preparation of rare-earth thulium doped tin-oxide thin films and their applications in thin film transistors
- 1 November 2019
- Published by Elsevier in Applied Surface Science
- Vol. 493, 63-69
Preparation of rare-earth thulium doped tin-oxide thin films and their applications in thin film transistors