Perviz Ahmedzade
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Perviz Ahmedzade has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Taylan Günay
Ege University
6 shared publications - Olga Starostenko
Department of Thermostable Polymers and Nanocomposites Institute of Macromolecular Chemistry of the NAS of Ukraine Kyiv Ukraine
4 shared publications - Alexander Fainleib
Department of Thermostable Polymers and Nanocomposites Institute of Macromolecular Chemistry of the NAS of Ukraine Kyiv Ukraine
3 shared publications - Burak Yiğit Katanalp
Çukurova University
3 shared publications - Ezgi Eren
Engineering Faculty, Adana Alparslan Turkes Science and Technology University, Adana 01250, Turkey
2 shared publications - Jan Valentin
Czech Technical University in Prague
2 shared publications
Latest Publications
- Open Access
- 24 April 2025
- Published by Eskisehir Osmangazi Universitesi Muhendislik ve Mimarlik Fakultesi Dergisi in Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi
- Vol. 33 (1) , 1739-1750
FRACTURE RESISTANCE AND SELF-HEALING POTENTIAL OF VERY THIN ASPHALT OVERLAY ENHANCED BY MICROWAVE HEATING
Very-thin asphalt overlay mixtures require a careful balance of competing demands, such as enhancing skid resistance, reducing noise, and improving rutting resistance, due to their reduced thickness. Achieving this balance involves reducing the nominal maximum aggregate size (NMAS) and incorporating coarser aggregate gradations. This design complexity is particularly critical for semi-dense graded very-thin overlays, which are more susceptible to cracking. In this context, investigating the healing potential of very-thin asphalt overlays through microwave heating offers a promising opportunity to extend pavement life while minimizing economic and environmental impacts. This study investigates and compares the cracking resistance and self-healing capabilities of two mixtures by applying Fracture–Healing–Fracture (FHF) cycles using Semi-Circular Bending (SCB) testing under microwave heating. The mixtures examined include a semi-dense aggregate gradation (BBTM8) designed for very-thin overlays, and a dense-graded aggregate mixture (ACL 16+) intended for binder courses and containing 50% reclaimed asphalt pavement (RAP). As a result, the ACL mixture exhibited a fracture toughness (KIC) value of 37.1 N/mm³⁄², attributed to its denser gradation, larger NMAS, higher stiffness, and greater RAP content. In contrast, the initial KIC value of the BBTM8 mixture was 18.4 N/mm³⁄². However, following microwave heating, the KIC value of the BBTM8 mixture increased significantly and approached that of the ACL mixture, aided by its higher air void content. The FHF cycle results revealed that the BBTM8 mixture demonstrated higher fracture resistance and more efficient recovery performance than the ACL mixture.
- 24 April 2025
- Published by Eskisehir Osmangazi Universitesi Muhendislik ve Mimarlik Fakultesi Dergisi in Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi
- Vol. 33 (1) , 1739-1750
Open AccessFRACTURE RESISTANCE AND SELF-HEALING POTENTIAL OF VERY THIN ASPHALT OVERLAY ENHANCED BY MICROWAVE HEATING
Very-thin asphalt overlay mixtures require a careful balance of competing demands, such as enhancing skid resistance, reducing noise, and improving rutting resistance, due to their reduced thickness. Achieving this balance involves reducing the nominal maximum aggregate size (NMAS) and incorporating coarser aggregate gradations. This design complexity is particularly critical for semi-dense graded very-thin overlays, which are more susceptible to cracking. In this context, investigating the healing potential of very-thin asphalt overlays through microwave heating offers a promising opportunity to extend pavement life while minimizing economic and environmental impacts. This study investigates and compares the cracking resistance and self-healing capabilities of two mixtures by applying Fracture–Healing–Fracture (FHF) cycles using Semi-Circular Bending (SCB) testing under microwave heating. The mixtures examined include a semi-dense aggregate gradation (BBTM8) designed for very-thin overlays, and a dense-graded aggregate mixture (ACL 16+) intended for binder courses and containing 50% reclaimed asphalt pavement (RAP). As a result, the ACL mixture exhibited a fracture toughness (KIC) value of 37.1 N/mm³⁄², attributed to its denser gradation, larger NMAS, higher stiffness, and greater RAP content. In contrast, the initial KIC value of the BBTM8 mixture was 18.4 N/mm³⁄². However, following microwave heating, the KIC value of the BBTM8 mixture increased significantly and approached that of the ACL mixture, aided by its higher air void content. The FHF cycle results revealed that the BBTM8 mixture demonstrated higher fracture resistance and more efficient recovery performance than the ACL mixture.
- 21 July 2024
- Published by Springer Nature
- p. 106-115
Assessment of the Effects of Induction Heating Induced-Healing on the Fracture Properties of Very Thin Asphalt Concrete
- 21 July 2024
- Published by Springer Nature
- p. 106-115
Assessment of the Effects of Induction Heating Induced-Healing on the Fracture Properties of Very Thin Asphalt Concrete
- Open Access
- 16 May 2024
- Published by Springer Nature in Materials and Structures
- Vol. 57 (5) , 1-24
Recycling the electric arc furnace waste after geopolymerization in bitumen: experimental analyses and LCA study
The conversion of solid waste materials into cleaner products for road paving. applications appears to be a promising and sustainable option. However, there is still a lack of attention given to quantifying the potential environmental benefits of recycling solid wastes in asphalt pavements, regarding the impact on asphalt performance. To address this gap, the present study investigates the effects of recycling electric arc waste based geopolymers on asphalt binder and mixture characteristics, as well as environmental outputs. For this purpose, geopolymers were incorporated into both neat and SBS-modified binders. A comprehensive rheological investigation was conducted using cutting-edge multiple stress creep recovery (MSCR) and linear amplitude sweep (LAS) analyses. Stability, Marshall quotient, and flow values, as well as dry and wetconditioned tensile strength were considered, to determine asphalt mixture properties. In the Life Cycle Assessment (LCA), greenhouse gases resulting from fuel and energy consumption in each inventory phase were determined. The varying service lifetimes, maintenance and rehabilitation plans, and production and construction requirements of the different asphalt schemes were taken into account. Subsequently, the environmental impacts of the asphalt mixtures, including global warming potential, acidification, eutrophication, and smog formation potential, along with the total energy demand, were calculated across different stages of the LCA. The results show that the geopolymerization process results in important contributions in terms of both environmental savings and pavement performance.
- 16 May 2024
- Published by Springer Nature in Materials and Structures
- Vol. 57 (5) , 1-24
Open AccessRecycling the electric arc furnace waste after geopolymerization in bitumen: experimental analyses and LCA study
The conversion of solid waste materials into cleaner products for road paving. applications appears to be a promising and sustainable option. However, there is still a lack of attention given to quantifying the potential environmental benefits of recycling solid wastes in asphalt pavements, regarding the impact on asphalt performance. To address this gap, the present study investigates the effects of recycling electric arc waste based geopolymers on asphalt binder and mixture characteristics, as well as environmental outputs. For this purpose, geopolymers were incorporated into both neat and SBS-modified binders. A comprehensive rheological investigation was conducted using cutting-edge multiple stress creep recovery (MSCR) and linear amplitude sweep (LAS) analyses. Stability, Marshall quotient, and flow values, as well as dry and wetconditioned tensile strength were considered, to determine asphalt mixture properties. In the Life Cycle Assessment (LCA), greenhouse gases resulting from fuel and energy consumption in each inventory phase were determined. The varying service lifetimes, maintenance and rehabilitation plans, and production and construction requirements of the different asphalt schemes were taken into account. Subsequently, the environmental impacts of the asphalt mixtures, including global warming potential, acidification, eutrophication, and smog formation potential, along with the total energy demand, were calculated across different stages of the LCA. The results show that the geopolymerization process results in important contributions in terms of both environmental savings and pavement performance.
- 1 November 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 35 (11)
Rheological Evaluation and Life Cycle Cost Analysis of the Geopolymer Produced from Waste Ferrochrome Electric Arc Furnace Fume as a Composite Component in Bitumen Modification
- 1 November 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 35 (11)
Rheological Evaluation and Life Cycle Cost Analysis of the Geopolymer Produced from Waste Ferrochrome Electric Arc Furnace Fume as a Composite Component in Bitumen Modification
- 13 March 2022
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 23 (13) , 4819-4830
Effect of maleic anhydride grafted and gamma-irradiated waste polypropylene on rheological properties of asphalt binder
Waste polymers have been employed as a modifier in bitumen to improve the performance of the binders and reduce plastic pollution. Grafting of maleic anhydride (MA) is a method to increase the chemical and physical consistency between the polymer and binder. In this study, maleic anhydride grafted waste polypropylene was employed as a bitumen modifier. Gamma irradiation is applied to waste polypropylene to improve the compatibility. The effects of MA-grafted irradiated waste polypropylene (PP -γ-MA) on physical and rheological properties of bitumen were investigated through a test program. Storage stability tests signifies that the gamma irradiation could diminish the phase separation between the modifier and bitumen. The thermorheological tests showed employing PP -γ-MA improves the high temperature performance, whilst it has a slightly adverse effect on low temperature performance of bitumen. The results of multiple stress creep recovery (MSCR) test indicate that PP -γ-MA reduces the non-recoverable deformation and enhanced elastic recovery of the material, whereas the linear amplitude sweep (LAS) test result signifies PP -γ-MA improved the fatigue life of asphalt by increasing fatigue damage resistance under different strain levels. The rheological test results emphasised on the usability of PP -γ-MA as a modifier in binders.- 13 March 2022
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 23 (13) , 4819-4830
Effect of maleic anhydride grafted and gamma-irradiated waste polypropylene on rheological properties of asphalt binder
Waste polymers have been employed as a modifier in bitumen to improve the performance of the binders and reduce plastic pollution. Grafting of maleic anhydride (MA) is a method to increase the chemical and physical consistency between the polymer and binder. In this study, maleic anhydride grafted waste polypropylene was employed as a bitumen modifier. Gamma irradiation is applied to waste polypropylene to improve the compatibility. The effects of MA-grafted irradiated waste polypropylene (PP -γ-MA) on physical and rheological properties of bitumen were investigated through a test program. Storage stability tests signifies that the gamma irradiation could diminish the phase separation between the modifier and bitumen. The thermorheological tests showed employing PP -γ-MA improves the high temperature performance, whilst it has a slightly adverse effect on low temperature performance of bitumen. The results of multiple stress creep recovery (MSCR) test indicate that PP -γ-MA reduces the non-recoverable deformation and enhanced elastic recovery of the material, whereas the linear amplitude sweep (LAS) test result signifies PP -γ-MA improved the fatigue life of asphalt by increasing fatigue damage resistance under different strain levels. The rheological test results emphasised on the usability of PP -γ-MA as a modifier in binders.- 1 March 2022
- Published by Teknik Dergi in Teknik Dergi
- Vol. 33 (2) , 11779-11798
Effects of Gilsonite on Performance Properties of Bitumen
The effectiveness of natural Gilsonite on the performance properties of modified bitumens was studied. Three samples having different ratios of Gilsonite that are 6%, 8% and 10% by weight of base bitumen which was PG 64-16 grade were prepared. The physical properties and storage stabilities of four samples were investigated by means of conventional tests. The short-term and long-term aging processes of bitumens were conducted with rolling thin oven and pressure aging vessel tests, respectively. Rheological properties of bitumens were examined by means of Superpave tests such as rotational viscosity, dynamic shear rheometer and bending beam rheometer. After the rheological study, the low and high temperature performance classes of bitumens were determined by the Superpave specification. The results showed that natural Gilsonite-modified bitumens provide improvement in rheological and physical properties of bitumen, and were found highly compatible with base bitumen. Gilsonite additive significantly increased stiffness and viscosity of bitumen, and improved the resistance against fatigue cracking and rutting of bitumen, without causing a reduction in thermal cracking resistance of bitumen.
- 1 March 2022
- Published by Teknik Dergi in Teknik Dergi
- Vol. 33 (2) , 11779-11798
Effects of Gilsonite on Performance Properties of Bitumen
The effectiveness of natural Gilsonite on the performance properties of modified bitumens was studied. Three samples having different ratios of Gilsonite that are 6%, 8% and 10% by weight of base bitumen which was PG 64-16 grade were prepared. The physical properties and storage stabilities of four samples were investigated by means of conventional tests. The short-term and long-term aging processes of bitumens were conducted with rolling thin oven and pressure aging vessel tests, respectively. Rheological properties of bitumens were examined by means of Superpave tests such as rotational viscosity, dynamic shear rheometer and bending beam rheometer. After the rheological study, the low and high temperature performance classes of bitumens were determined by the Superpave specification. The results showed that natural Gilsonite-modified bitumens provide improvement in rheological and physical properties of bitumen, and were found highly compatible with base bitumen. Gilsonite additive significantly increased stiffness and viscosity of bitumen, and improved the resistance against fatigue cracking and rutting of bitumen, without causing a reduction in thermal cracking resistance of bitumen.
- Open Access
- 15 July 2021
- Published by International Journal of Eastern Anatolia Science Engineering and Design in Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi
- Vol. 3 (1) , 55-71
Uzun Süreli Yaşlandırılmış Etilen Vinil Asetat (EVA) Polimer Katkılı Asfalt Bağlayıcının Yorulma Ömrünün İncelenmesi
Bu çalışmada, polimer katkılı B50/70 sınıfına ait bitümlü bağlayıcının laboratuvar ortamında uzun süreli yaşlandırılması gerçekleştirilerek asfalt kaplamadaki yorulma ömrü tahmin edilmiştir. Bitümlü sıcak karışımların (BSK) orta sıcaklıklardaki yorulma performansını arttırma amacıyla Etilen Vinil Asetat (EVA) polimer katkısı bitüme yaygın olarak eklenmektedir. Asfalt bağlayıcıların modifiye işlemi tamamlanmasının ardından numuneler sırasıyla dönel ince film etüvü (RTFO) deneyiyle kısa süreli ve basınçlı yaşlandırma kabı (PAV) deneyiyle uzun süre yaşlandırmaya maruz bırakılmıştır. Yorulma performansının belirlenmesi Anton Paar Smart Pave Plus 301 DSR cihazıyla gerçekleştirilmiştir. Çalışmada, yorulma parametresi, Superpave yorulma deneyi ve lineer farklı genlik (LAS) deneyleriyle incelenmiş ve bu iki farklı deneyden elde edilen veriler karşılaştırılmıştır. Çalışma sonucunda, EVA katkısının saf asfalt bağlayıcının yorulma performansını ve yorulma ömrünü önemli ölçüde arttırdığı tespit edilmiştir.
- 15 July 2021
- Published by International Journal of Eastern Anatolia Science Engineering and Design in Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi
- Vol. 3 (1) , 55-71
Open AccessUzun Süreli Yaşlandırılmış Etilen Vinil Asetat (EVA) Polimer Katkılı Asfalt Bağlayıcının Yorulma Ömrünün İncelenmesi
Bu çalışmada, polimer katkılı B50/70 sınıfına ait bitümlü bağlayıcının laboratuvar ortamında uzun süreli yaşlandırılması gerçekleştirilerek asfalt kaplamadaki yorulma ömrü tahmin edilmiştir. Bitümlü sıcak karışımların (BSK) orta sıcaklıklardaki yorulma performansını arttırma amacıyla Etilen Vinil Asetat (EVA) polimer katkısı bitüme yaygın olarak eklenmektedir. Asfalt bağlayıcıların modifiye işlemi tamamlanmasının ardından numuneler sırasıyla dönel ince film etüvü (RTFO) deneyiyle kısa süreli ve basınçlı yaşlandırma kabı (PAV) deneyiyle uzun süre yaşlandırmaya maruz bırakılmıştır. Yorulma performansının belirlenmesi Anton Paar Smart Pave Plus 301 DSR cihazıyla gerçekleştirilmiştir. Çalışmada, yorulma parametresi, Superpave yorulma deneyi ve lineer farklı genlik (LAS) deneyleriyle incelenmiş ve bu iki farklı deneyden elde edilen veriler karşılaştırılmıştır. Çalışma sonucunda, EVA katkısının saf asfalt bağlayıcının yorulma performansını ve yorulma ömrünü önemli ölçüde arttırdığı tespit edilmiştir.
- Open Access
- 15 July 2021
- Published by International Journal of Eastern Anatolia Science Engineering and Design in Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi
- Vol. 3 (1) , 1-20
Etilen Vinil Asetat (EVA) Polimer Modifiyeli Bitümün Fiziksel ve Reolojik Özelliklerinin Araştırılması
Tr en Bu çalışmada, Etilen Vinil Asetat (EVA) polimer katkısının bitümün fiziksel ve yüksek sıcaklık performansı üzerindeki etkisi incelenmiştir. Araştırma kapsamında geleneksel bitüm deneyleri ile birlikte dönel viskozite deneyleri gerçekleştirilmiş ayrıca bağlayıcıların yüksek sıcaklık performansını belirleyen reolojik çalışmalar dinamik kayma reometresi (DSR) ve çoklu gerilmeli sünme geri dönme (MSCR) deneyleri yardımıyla uygulanmıştır. Çalışmanın sonucunda, EVA polimeri saf bitümün penetrasyonu düşürdüğü, yumuşama noktası ve viskozitesini ise arttırdığı tespit edilmiş bu sayede bitümün fiziksel olarak sertleşmesine neden olduğu ortaya konmuştur. Ayrıca, çalışma kapsamında DSR yüksek sıcaklık performans sınıfı (PG) 76 °C olarak tespit edilen %7 EVA katkılı bağlayıcının MSCR deneyine göre performans sınıfı PG70S olarak belirlenmiş ve PG64S olan saf bitüme göre bir sınıf artış sağlandığı belirlenmiştir. Bu sonuç, EVA katkılı bitümün 70°C sıcaklıkta, 70 km/s üzeri araç hızında ve yirmi yıl boyunca trafik tasarım şeridinde beklenen maksimum 10 milyon (eşdeğer standard dingil yükü) ESAL sayısında kalıcı deformasyona maruz kalmadan kullanılabileceğini ifade etmektedir. The effects of Ethylene-Vinyl Acetate (EVA) on physical and high temperature performance of bitumen was investigated in this work. conventional bitumen tests, rotational viscosity tests were conducted within the context of the research, and rheological studies such as dynamic shear rheometer (DSR), multiple stress creep recovery tests (MSCR) were also performed to determine high temperature performance of binders. The results indicated that EVA polymers reduce penetration, increase the softening point and viscosity of the bitumen which in turn indicates bitumen became stiffer after the modification. Besides, %7 EVA modified binder classified as PG 76 in DSR test was graded in MSCR grading system as PG70S which is one level higher compared to that of base bitumen. This result means that EVA modified binders can be used without permanent deformation until 70°C, under 10 million ESAL at 70 km/h traffic speed.
- 15 July 2021
- Published by International Journal of Eastern Anatolia Science Engineering and Design in Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi
- Vol. 3 (1) , 1-20
Open AccessEtilen Vinil Asetat (EVA) Polimer Modifiyeli Bitümün Fiziksel ve Reolojik Özelliklerinin Araştırılması
Tr en Bu çalışmada, Etilen Vinil Asetat (EVA) polimer katkısının bitümün fiziksel ve yüksek sıcaklık performansı üzerindeki etkisi incelenmiştir. Araştırma kapsamında geleneksel bitüm deneyleri ile birlikte dönel viskozite deneyleri gerçekleştirilmiş ayrıca bağlayıcıların yüksek sıcaklık performansını belirleyen reolojik çalışmalar dinamik kayma reometresi (DSR) ve çoklu gerilmeli sünme geri dönme (MSCR) deneyleri yardımıyla uygulanmıştır. Çalışmanın sonucunda, EVA polimeri saf bitümün penetrasyonu düşürdüğü, yumuşama noktası ve viskozitesini ise arttırdığı tespit edilmiş bu sayede bitümün fiziksel olarak sertleşmesine neden olduğu ortaya konmuştur. Ayrıca, çalışma kapsamında DSR yüksek sıcaklık performans sınıfı (PG) 76 °C olarak tespit edilen %7 EVA katkılı bağlayıcının MSCR deneyine göre performans sınıfı PG70S olarak belirlenmiş ve PG64S olan saf bitüme göre bir sınıf artış sağlandığı belirlenmiştir. Bu sonuç, EVA katkılı bitümün 70°C sıcaklıkta, 70 km/s üzeri araç hızında ve yirmi yıl boyunca trafik tasarım şeridinde beklenen maksimum 10 milyon (eşdeğer standard dingil yükü) ESAL sayısında kalıcı deformasyona maruz kalmadan kullanılabileceğini ifade etmektedir. The effects of Ethylene-Vinyl Acetate (EVA) on physical and high temperature performance of bitumen was investigated in this work. conventional bitumen tests, rotational viscosity tests were conducted within the context of the research, and rheological studies such as dynamic shear rheometer (DSR), multiple stress creep recovery tests (MSCR) were also performed to determine high temperature performance of binders. The results indicated that EVA polymers reduce penetration, increase the softening point and viscosity of the bitumen which in turn indicates bitumen became stiffer after the modification. Besides, %7 EVA modified binder classified as PG 76 in DSR test was graded in MSCR grading system as PG70S which is one level higher compared to that of base bitumen. This result means that EVA modified binders can be used without permanent deformation until 70°C, under 10 million ESAL at 70 km/h traffic speed.
- Open Access
- 25 June 2020
- Published by Riga Technical University in The Baltic Journal of Road and Bridge Engineering
- Vol. 15 (2) , 49-65
Effects of Carbon Fibre on Performance Properties of Asphalt Mixtures
In this study, the effects of carbon fibre on improving the performance characteristics of asphalt mixtures were investigated. To this end, four percentages of carbon fibre (0%, 0.3%, 0.5%, and 0.7% by weight of bitumen) were used as an additive in asphalt mixtures. The mechanical properties of prepared mixture specimens were investigated using tests such as Marshall Stability and flow, Indirect Tensile Stiffness Modulus, Creep Stiffness, Indirect Tensile Strength, and moisture resistance. The results of tests applied to asphalt mixtures showed that the carbon fibre additive increased the resistance to shear stress by 25%, the fatigue life by 51% at 40 °C and the permanent deformation resistance by 2.25 times at 60 °C. It also improved the resistance of mixtures to moisture damage by increasing the durability and cohesion of asphalt mixtures. Experimental results indicated that the carbon fibre provided a positive contribution to the performance properties of asphalt pavements.
- 25 June 2020
- Published by Riga Technical University in The Baltic Journal of Road and Bridge Engineering
- Vol. 15 (2) , 49-65
Open AccessEffects of Carbon Fibre on Performance Properties of Asphalt Mixtures
In this study, the effects of carbon fibre on improving the performance characteristics of asphalt mixtures were investigated. To this end, four percentages of carbon fibre (0%, 0.3%, 0.5%, and 0.7% by weight of bitumen) were used as an additive in asphalt mixtures. The mechanical properties of prepared mixture specimens were investigated using tests such as Marshall Stability and flow, Indirect Tensile Stiffness Modulus, Creep Stiffness, Indirect Tensile Strength, and moisture resistance. The results of tests applied to asphalt mixtures showed that the carbon fibre additive increased the resistance to shear stress by 25%, the fatigue life by 51% at 40 °C and the permanent deformation resistance by 2.25 times at 60 °C. It also improved the resistance of mixtures to moisture damage by increasing the durability and cohesion of asphalt mixtures. Experimental results indicated that the carbon fibre provided a positive contribution to the performance properties of asphalt pavements.