KNKiyokazu Nakajima

Kiyokazu Nakajima

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kiyokazu Nakajima has a total of 371 co-authors. Here are the top co-authors by number of shared publications:

  • Yuichiro Doki

    Department of Gastroenterological Surgery, The University of Osaka Graduate School of Medicine, Osaka, Japan

    98 shared publications
  • Masaki Mori

    Department of Surgery and Science, Kyushu University Graduate School of Medicine, Fukuoka, Japan

    58 shared publications
  • Tsuyoshi Takahashi

    Department of Gastroenterological Surgery, The University of Osaka Graduate School of Medicine, Osaka, Japan

    52 shared publications
  • Yukinori Kurokawa

    Department of Gastroenterological Surgery, The University of Osaka Graduate School of Medicine, Osaka, Japan

    49 shared publications
  • Tomoki Makino

    Department of Gastroenterological Surgery, The University of Osaka Graduate School of Medicine, Osaka, Japan

    38 shared publications
  • Makoto Yamasaki

    Department of Gastroenterological Surgery, Osaka University, Graduate School of Medicine, Osaka, Japan

    37 shared publications

Latest Publications

  • Open Access

    The role of industrial microfocus CT in medical device research and development

    by Shinnosuke Nagano, Yuji Ishii, Kota Momose, Chihiro Toge, Shigeto Nakai, Takaomi Hagi, Kotaro Yamashita, Takuro Saito, Koji Tanaka, Tomoki Makino, et al.

  • Open Access

    Console surgeon-controlled suction and coagulation during robot-assisted hepatectomy: early clinical evaluation of new flexible suction/coagulation probe

    by Yoshito Tomimaru, Kiyokazu Nakajima, Naoto Gotohda, Yuki Ushimaru, Namiko Ban, Nobuaki Tagi, Makoto Hosaka, Shinichiro Hasegawa, Hirofumi Akita, Takehiro Noda, et al.

    Hepatectomy remains one of the most common treatments for primary and metastatic liver tumors [1,2]. In recent years, robot-assisted hepatectomy has become increasingly widespread because it combin...

  • Open Access

    Endoscopic Submucosal Dissection Using a Finger‐Assist Device

    by Mafu Tsunemi, Ippei Matsuzaki, Kiyokazu Nakajima


  • Immersive endoscopy: potential usefulness from an ergonomic perspective

    by Shinnosuke Nagano, Kota Momose, Takamitsu Kato, Yuji Ishii, Shuhei Yamaguchi, Takaomi Hagi, Kotaro Yamashita, Takuro Saito, Koji Tanaka, Tomoki Makino, et al.

    In flexible endoscopy, ergonomic issues such as suboptimal monitor positioning are becoming increasingly important. Head-mounted display (HMD) technology may provide an ergonomic environment independent of room setup or endoscopist posture. This study evaluated the feasibility and ergonomic benefits of immersive endoscopy using HMD technology. We used the Apple Vision Pro (AVP), a video see-through HMD. Participants performed an endoscopic marking task under three monitor settings: ergonomic, non-ergonomic, and immersive. Procedure time, muscle effort by wireless electromyography, and mental workload by NASA-TLX were compared. Eleven endoscopists participated. Compared with the non-ergonomic setting, the immersive and ergonomic settings showed significantly shorter procedure times and lower mental workload, with no difference between the immersive and ergonomic settings. Both immersive and ergonomic settings also showed significantly lower muscle activation in the trapezius, posterior neck, and left sternocleidomastoid muscles than the non-ergonomic setting. In addition, compared with the ergonomic setting, immersive endoscopy showed significantly lower activation in the trapezius, erector spinae, and right sternocleidomastoid muscles. Immersive endoscopy using AVP improved performance and reduced muscle effort and mental workload compared with the non-ergonomic setting, while reducing activation in specific postural muscles even compared with the ergonomic setting.


  • Open Access

    Development and Evaluation of an Ergonomically Optimized Scope‐Holder for Flexible Endoscopy (With Video)

    by Shinnosuke Nagano, Kota Momose, Yuji Ishii, Shuhei Yamaguchi, Shigeto Nakai, Takaomi Hagi, Kotaro Yamashita, Takuro Saito, Koji Tanaka, Tomoki Makino, et al.

    Objectives: Growing endoscopy demand has increased physical workload and injury risk among endoscopists, while current ergonomic solutions remain limited. We developed a newly motion‐optimized endoscope‐holding device (scope‐holder) designed to reduce muscular burden, allowing each operator to adjust the scope position according to individual preference. This study assessed its ergonomic impacts in a simulated setting. Methods: Clinical endoscopists and nonmedical participants without any medical background were recruited to collect data. Each participant performed a simulated endoscopic marking task with and without the scope‐holder. We compared the procedure time of the task, evaluated muscle efforts in the upper arm, forearm, and shoulder using wireless electromyography, as well as mental workload using NASA‐TLX across the two settings. Results: A total of 26 participants, including 17 clinical endoscopists and 9 nonmedical participants, were enrolled. In the overall cohort, the scope‐holder assisted group significantly reduced activation of biceps brachii ( p < 0.001), trapezius ( p < 0.001), flexor carpi ulnaris ( p = 0.049) muscles and NASA‐TLX scores ( p = 0.003). Additionally, the assisted group achieved a shorter procedure time ( p = 0.018) compared with the non‐assisted group. Subgroup analysis showed reduced muscle load in both clinical endoscopists and nonmedical participants ( p < 0.05), with additional improvements in mental workload ( p = 0.004) and the procedure time ( p = 0.027) observed only in nonmedical participants, whereas clinical endoscopists showed no significant difference in mental workload ( p = 0.299) and procedure time ( p = 0.229). Conclusions: Our newly developed scope‐holder, designed to accommodate the operator's natural scope motion, effectively reduced physical and mental workload. It offers a practical solution to improve ergonomics in endoscopic clinical practice.


  • Open Access

    The Ergonomic Comparison of Endoscopist's Hand/Arm Movement and Relevant Muscle Load Between the Diagnostic and Therapeutic Upper Gastrointestinal Endoscopy

    by Shinnosuke Nagano, Kota Momose, Yuji Ishii, Shuhei Yamaguchi, Motoki Sasaki, Sho Komukai, Kotaro Yamashita, Takuro Saito, Koji Tanaka, Tomoki Makino, et al.

    Objectives: There have been little quantitative studies of ergonomics in the upper gastrointestinal endoscopy. We aimed to identify the ergonomic characteristics of both diagnostic (esophagogastroduodenoscopy; EGD) and therapeutic (endoscopic submucosal dissection; ESD) endoscopy in terms of the movement range of the endoscopist's hand/arm holding the endoscope and muscle activity during procedures, in a preclinical setting. Methods: (1) Optical reflective markers attached to the standard flexible endoscope were traced using a multiple motion capture system during EGD and ESD. The data were processed to generate three‐dimensional XYZ coordinate data for each procedure. (2) Wireless electromyogram electrodes were attached to eight muscles in the left hand, forearm, shoulder, neck and back. Muscle activation during EGD and ESD was assessed as % maximal voluntary contraction (%MVC). Results: (1) The motion capture was performed during 13 EGDs and 12 ESDs. On all XYZ axes, the movement range of the endoscope was significantly smaller during ESD than EGD (X; p < 0.001, Y; p = 0.015, Z; p < 0.001). (2) The EMG was recorded during 15 EGDs and eight ESDs. The higher mean %MVC of the pronator teres muscle (52.1%) and the extensor carpi radialis muscle (39.3%) was observed during all procedures. The %MVC tended to be higher during ESD (34.1%) than EGD (28.9%) in an analysis including all muscles ( p = 0.078). Conclusions: Our study is the first to show therapeutic endoscopy had the smaller movement range of the endoscope, but the larger muscle activity than diagnostic endoscopy. These data could deepen our ergonomic understanding of endoscopy and help to optimize endoscopic techniques and/or relevant working environment.


  • Open Access

    The EAES intellectual property protection guide

    by Kiyokazu Nakajima, Luigi Manfredi, Etsuko Yoshida, Tim Horeman, Yoav Mintz

    This guide is designed to assist surgeons in understanding the proper procedures for legitimately securing the outcomes of their original ideas and collaborations with industry partners as “intellectual property.” Our web-based survey conducted among EAES members in 2019 revealed that surgeons have traditionally shown limited interest in intellectual property. The findings suggested that even when surgeons generate and realize novel concepts, these innovations are often inadequately protected, leaving them vulnerable to misappropriation. Accordingly, this guide focuses on the patenting process for surgeons engaged in collaborative research with industry. It addresses common questions that arise during this process in a Q&A format. The guide also explains key aspects of communication with corporate partners and intellectual property specialists during patent application procedures. Furthermore, it outlines the transition from domestic to international patent protection, with particular emphasis on the Patent Cooperation Treaty (PCT) system. Although this article serves as a practical guide for surgeons seeking to protect their intellectual contributions, it may also be used as an educational resource for industry designers, engineers and business developers, highlighting the importance of respecting and safeguarding the intellectual property rights of medical professionals.


  • Open Access

    Flexible suction–coagulation probe restores dexterity in robot-assisted surgery: bench-to-bedside evaluation

    by Yuki Ushimaru, Shohei Shibamoto, Kazuyoshi Yamamoto, Yoshitomo Yanagimoto, Namiko Ban, Nobuaki Tagi, Makoto Hosaka, Naoto Gotohda, Hidetoshi Eguchi, Yuichiro Doki, et al.

    Objective: Rigid suction–coagulation probes constrain the wrist-like articulation that is central to robotic surgery. We therefore designed a 5-mm single-use flexible suction ball coagulator (flex-SBC) with a modified core design to restore dexterity and assessed its mechanical performance and early clinical feasibility, including the effect of the common robotic gripping strategies on suction flow. Methods: Preclinical. The new 7 × 7 core embedded in silicone was compared with the conventional 1 × 7 core design. Shaft pliability was quantified by sagging displacement and rebound force testing. Suction flow at − 20, − 30, and − 40 kPa was measured, and the impact of grip location (electrode base vs silicone shaft) and forceps type (fenestrated or Maryland bipolar) was analyzed statistically. Clinical. The flex-SBC was used in 12 consecutive robotic gastrectomies with prospective collection of device performance, adverse events, and surgeon rating on seven-domain via three-point Likert scale. Results: Preclinical. Adopting the 7 × 7 increased mean sagging displacement from 15.6 ± 1.8 to 39.3 ± 3.2 mm (p < 0.001) and reduced rebound force from 0.288 ± 0.014 to 0.059 ± 0.004 N (p < 0.001). Mean flow rates were 6.76 ± 0.88, 8.87 ± 0.43, and 10.58 ± 0.40 mL/sec at − 20, − 30, and − 40 kPa, respectively—approximately half those of a rigid probe (all p < 0.001) but still exceeding published thresholds for effective evacuation. Gripping the silicone shaft, especially with Maryland forceps, sharply reduced flow (60% reduction; p < 0.0011). Clinical. All operations were completed without device-related malfunctions, injuries, or conversions. Of 84 survey ratings, connection setup, suction efficiency, tissue safety, and overall satisfaction were “satisfactory” in 100%; maneuverability was “satisfactory” in 65% and “average” in 35%. No “unsatisfactory” scores were recorded. Conclusions: The flex-SBC bends where the robot bends, enabling safe, practical use across robot-assisted upper-GI surgery. Grip technique influences device performance, providing important implications training. Larger comparative trials should clarify whether these ergonomic gains translate into shorter operating times and improved oncologic precision.


  • Efficacy of a Novel Hemostatic Material “Sodium Calcium Alginate’’ in a Porcine Acute Phase Model

    by Shoichiro Urabe, Masahiro Sato, Yuto Kubo, Sayaka Suzuki, Takahiro Yoshihara, Kousuke Yamauchi, Tsuyoshi Hata, Takayuki Ogino, Norikatsu Miyoshi, Mamoru Uemura, et al.

  • Open Access

    Development of novel thoracic retractor for resuscitative thoracotomy

    by Shoichiro Urabe, Junya Shimazaki, Tomohisa Izutani, Tsuyoshi Hata, Mamoru Uemura, Hidetoshi Eguchi, Yuichiro Doki, Kiyokazu Nakajima

    Background: Resuscitative thoracotomy (RT) is a critical intervention for patients in traumatic cardiac arrest or hemorrhagic shock, where survival is highly dependent on the time required to perform the procedure. Despite its urgency, RT is still conducted using traditional thoracic retractors originally designed for scheduled surgeries, which pose challenges in emergency settings. To address these limitations, we developed a novel thoracic retractor optimized for RT and evaluated its performance compared to a conventional model. Methods: The novel retractor was designed with an arrow-shaped hook for improved intercostal insertion and a continuously rotatable handle to enhance procedural efficiency. A comparative study using excised porcine thoraxes was conducted to assess its performance. Six cm incisions were made in the intercostal spaces bilaterally before retractor insertion. Evaluators inserted the device, performed three handle rotations, and repeated the procedure using the other retractor on the contralateral side. The primary outcome was the time required for three rotations, while secondary outcomes included ease of insertion, ease of rotation, and hook stability, rated on a 6-point scale by evaluators. Results: Ten surgeons (n = 10) performed thoracotomy using both the novel and conventional retractors. Comparison of the time required for three handle rotations between the novel and conventional retractors demonstrated a statistically significant reduction with the novel retractor. The median time to complete three rotations was 16.0 [11.7–19.1] seconds with the novel retractor, compared to 7.0 [5.3–8.5] seconds with the conventional model (P < 0.01). The ease of insertion was rated significantly higher with the novel retractor compared to the conventional model (6.0 [5.5–6.0] vs. 2.5 [2.0–3.0], P < 0.01). The ease of rotation was also rated significantly higher with the novel retractor than with the conventional model (5.5 [5.0–6.0] vs. 2.5 [1.0–3.5], P < 0.01). In the evaluation of the hook stability, no significant difference was observed between the novel and conventional retractors (P = 1.0). Conclusions: The novel thoracic retractor enables faster and easier thoracotomy compared to conventional model. Given the strong association between time and RT prognosis, this device is well-suited for RT procedures requiring rapid execution.