Shouleh Nikzad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shouleh Nikzad has a total of 132 co-authors. Here are the top co-authors by number of shared publications:
- Michael E. Hoenk
Jet Propulsion Lab. (United States)
5 shared publications - April D. Jewell
California Institute of Technology, Jet Propulsion Laboratory, Pasadena, California, United States
4 shared publications - John Hennessy
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109, USA
4 shared publications Michael E. Hoenk
National Aeronautics and Space Administration (NASA)
4 shared publications- Todd J. Jones
Jet Propulsion Lab. (United States)
4 shared publications Frank Greer
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California 91109, USA
3 shared publications
Latest Publications
- 14 November 2024
- Published by Springer Nature
- p. 1-36
From Nanotechnology to Nanotechnology/Nanoneurosurgery and Nanobioelectronics: A Historical Review of Milestones
- 14 November 2024
- Published by Springer Nature
- p. 1-36
From Nanotechnology to Nanotechnology/Nanoneurosurgery and Nanobioelectronics: A Historical Review of Milestones
- Open Access
Surface Passivation by Quantum Exclusion: On the Quantum Efficiency and Stability of Delta-Doped CCDs and CMOS Image Sensors in Space
Radiation-induced damage and instabilities in back-illuminated silicon detectors have proved to be challenging in multiple NASA and commercial applications. In this paper, we develop a model of detector quantum efficiency (QE) as a function of Si–SiO2 interface and oxide trap densities to analyze the performance of silicon detectors and explore the requirements for stable, radiation-hardened surface passivation. By analyzing QE data acquired before, during, and after, exposure to damaging UV radiation, we explore the physical and chemical mechanisms underlying UV-induced surface damage, variable surface charge, QE, and stability in ion-implanted and delta-doped detectors. Delta-doped CCD and CMOS image sensors are shown to be uniquely hardened against surface damage caused by ionizing radiation, enabling the stability and photometric accuracy required by NASA for exoplanet science and time domain astronomy.
Open AccessSurface Passivation by Quantum Exclusion: On the Quantum Efficiency and Stability of Delta-Doped CCDs and CMOS Image Sensors in Space
Radiation-induced damage and instabilities in back-illuminated silicon detectors have proved to be challenging in multiple NASA and commercial applications. In this paper, we develop a model of detector quantum efficiency (QE) as a function of Si–SiO2 interface and oxide trap densities to analyze the performance of silicon detectors and explore the requirements for stable, radiation-hardened surface passivation. By analyzing QE data acquired before, during, and after, exposure to damaging UV radiation, we explore the physical and chemical mechanisms underlying UV-induced surface damage, variable surface charge, QE, and stability in ion-implanted and delta-doped detectors. Delta-doped CCD and CMOS image sensors are shown to be uniquely hardened against surface damage caused by ionizing radiation, enabling the stability and photometric accuracy required by NASA for exoplanet science and time domain astronomy.
- Open Access
- 1 January 2021
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 28 (1) , 131-145
Characterization of the Percival detector with soft X-rays
In this paper the back-side-illuminated Percival 2-Megapixel (P2M) detector is presented, along with its characterization by means of optical and X-ray photons. For the first time, the response of the system to soft X-rays (250 eV to 1 keV) is presented. The main performance parameters of the first detector are measured, assessing the capabilities in terms of noise, dynamic range and single-photon discrimination capability. Present limitations and coming improvements are discussed.
- 1 January 2021
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 28 (1) , 131-145
Open AccessCharacterization of the Percival detector with soft X-rays
In this paper the back-side-illuminated Percival 2-Megapixel (P2M) detector is presented, along with its characterization by means of optical and X-ray photons. For the first time, the response of the system to soft X-rays (250 eV to 1 keV) is presented. The main performance parameters of the first detector are measured, assessing the capabilities in terms of noise, dynamic range and single-photon discrimination capability. Present limitations and coming improvements are discussed.
- 14 May 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10639, 106391P
Advanced imaging capabilities by incorporating plasmonics and metamaterials in detectors
Ultraviolet detection is often required to be made in the presence of a strong background of solar radiation which needs to be suppressed, but materials limitations at these wavelengths can impact both filter and sensor performance. In this work, we explore the use of 1D photonic bandgap structures integrated directly onto a Si sensor that can operate with solar blindness. These filters take advantage of the improved admittance with silicon to significantly improve throughput over conventional stand-alone bandpass filter elements. At far ultraviolet wavelengths these filters require the use of non-absorbing dielectrics such as the metal fluoride materials of MgF2, AlF3 and LiF. The latest performance of these 1D multilayer filters on Si photodiodes and CCD imaging sensors is demonstrated. We have also extended these 1D structures to more complex multilayers guided by the design concepts of metamaterials and metatronics, and to 2D patterned plasmonic hole array filters fabricated in aluminum. The performance of sensors and test filter structures is presented with an emphasis on UV throughput.
- 14 May 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10639, 106391P
Advanced imaging capabilities by incorporating plasmonics and metamaterials in detectors
Ultraviolet detection is often required to be made in the presence of a strong background of solar radiation which needs to be suppressed, but materials limitations at these wavelengths can impact both filter and sensor performance. In this work, we explore the use of 1D photonic bandgap structures integrated directly onto a Si sensor that can operate with solar blindness. These filters take advantage of the improved admittance with silicon to significantly improve throughput over conventional stand-alone bandpass filter elements. At far ultraviolet wavelengths these filters require the use of non-absorbing dielectrics such as the metal fluoride materials of MgF2, AlF3 and LiF. The latest performance of these 1D multilayer filters on Si photodiodes and CCD imaging sensors is demonstrated. We have also extended these 1D structures to more complex multilayers guided by the design concepts of metamaterials and metatronics, and to 2D patterned plasmonic hole array filters fabricated in aluminum. The performance of sensors and test filter structures is presented with an emphasis on UV throughput.
- Open Access
- 4 May 2018
- Published by MDPI AG in Inorganics
- Vol. 6 (2) , 46
Atomic Layer Deposition of Lithium Fluoride Optical Coatings for the Ultraviolet
Lithium fluoride is an important material for ultraviolet optical systems, possessing among the largest optical bandgaps of dielectric materials. We report on the development of an atomic layer deposition (ALD) process for lithium fluoride that is capable of depositing thin films in a self-limiting manner, with an approximate deposition rate of approximately 0.15 Å per ALD cycle at a substrate temperature of 150 °C. Films are characterized by spectroscopic ellipsometry, atomic force microscopy, X-ray photoelectron spectroscopy, and far ultraviolet reflectometry. For substrate temperatures of 150 °C and greater, films showed significant microroughness with a correlated reduction in effective refractive index. This behavior was mitigated by a reduction in substrate temperature to as low as 100 °C. Films deposited on silicon substrates were subjected to long-term storage testing to evaluate the environmental sensitivity of the deposited layers. Protected aluminum mirrors were also fabricated with ALD LiF overcoats, yielding a reflectance of 84% at a wavelength of 125 nm. The performance relative to state-of-the-art LiF thin films deposited by physical vapor deposition methods is discussed, along with the prospects for future optimization.
- 4 May 2018
- Published by MDPI AG in Inorganics
- Vol. 6 (2) , 46
Open AccessAtomic Layer Deposition of Lithium Fluoride Optical Coatings for the Ultraviolet
Lithium fluoride is an important material for ultraviolet optical systems, possessing among the largest optical bandgaps of dielectric materials. We report on the development of an atomic layer deposition (ALD) process for lithium fluoride that is capable of depositing thin films in a self-limiting manner, with an approximate deposition rate of approximately 0.15 Å per ALD cycle at a substrate temperature of 150 °C. Films are characterized by spectroscopic ellipsometry, atomic force microscopy, X-ray photoelectron spectroscopy, and far ultraviolet reflectometry. For substrate temperatures of 150 °C and greater, films showed significant microroughness with a correlated reduction in effective refractive index. This behavior was mitigated by a reduction in substrate temperature to as low as 100 °C. Films deposited on silicon substrates were subjected to long-term storage testing to evaluate the environmental sensitivity of the deposited layers. Protected aluminum mirrors were also fabricated with ALD LiF overcoats, yielding a reflectance of 84% at a wavelength of 125 nm. The performance relative to state-of-the-art LiF thin films deposited by physical vapor deposition methods is discussed, along with the prospects for future optimization.
- Open Access
A Hybrid Readout Solution for GaN-Based Detectors Using CMOS Technology
Gallium nitride (GaN) and its alloys are becoming preferred materials for ultraviolet (UV) detectors due to their wide bandgap and tailorable out-of-band cutoff from 3.4 eV to 6.2 eV. GaN based avalanche photodiodes (APDs) are particularly suitable for their high photon sensitivity and quantum efficiency in the UV region and for their inherent insensitivity to visible wavelengths. Challenges exist however for practical utilization. With growing interests in such photodetectors, hybrid readout solutions are becoming prevalent with CMOS technology being adopted for its maturity, scalability, and reliability. In this paper, we describe our approach to combine GaN APDs with a CMOS readout circuit, comprising of a linear array of 1 × 8 capacitive transimpedance amplifiers (CTIAs), implemented in a 0.35 µm high voltage CMOS technology. Further, we present a simple, yet sustainable circuit technique to allow operation of APDs under high reverse biases, up to ≈80 V with verified measurement results. The readout offers a conversion gain of 0.43 µV/e−, obtaining avalanche gains up to 103. Several parameters of the CTIA are discussed followed by a perspective on possible hybridization, exploiting the advantages of a 3D-stacked technology.
Open AccessA Hybrid Readout Solution for GaN-Based Detectors Using CMOS Technology
Gallium nitride (GaN) and its alloys are becoming preferred materials for ultraviolet (UV) detectors due to their wide bandgap and tailorable out-of-band cutoff from 3.4 eV to 6.2 eV. GaN based avalanche photodiodes (APDs) are particularly suitable for their high photon sensitivity and quantum efficiency in the UV region and for their inherent insensitivity to visible wavelengths. Challenges exist however for practical utilization. With growing interests in such photodetectors, hybrid readout solutions are becoming prevalent with CMOS technology being adopted for its maturity, scalability, and reliability. In this paper, we describe our approach to combine GaN APDs with a CMOS readout circuit, comprising of a linear array of 1 × 8 capacitive transimpedance amplifiers (CTIAs), implemented in a 0.35 µm high voltage CMOS technology. Further, we present a simple, yet sustainable circuit technique to allow operation of APDs under high reverse biases, up to ≈80 V with verified measurement results. The readout offers a conversion gain of 0.43 µV/e−, obtaining avalanche gains up to 103. Several parameters of the CTIA are discussed followed by a perspective on possible hybridization, exploiting the advantages of a 3D-stacked technology.
- Open Access
High Efficiency UV/Optical/NIR Detectors for Large Aperture Telescopes and UV Explorer Missions: Development of and Field Observations with Delta-doped Arrays
A number of exciting concepts are under development for Flagship, Probe class, Explorer class, and Suborbital class NASA missions in the ultraviolet/optical spectral ranges. These missions will depend on high performance silicon detector arrays being delivered affordably and in high numbers. In a focused effort we have advanced delta-doping technology to high throughput and high yield wafer-scale processing, encompassing a multitude of state-of-the-art silicon-based detector formats and designs. As part of this technology advancement and in preparation for upcoming missions, we have embarked on a number of field observations, instrument integrations, and independent evaluations of delta-doped arrays. In this paper, we present recent data and innovations from the Advanced Detectors and Systems program at JPL, including two-dimensional doping technology; our end-to-end post-fabrication processing of high performance UV/Optical/NIR arrays; and advanced coatings for detectors and optical elements. Additionally, we present examples of past, in-progress, and planned observations and deployments of delta-doped arrays.
Open AccessHigh Efficiency UV/Optical/NIR Detectors for Large Aperture Telescopes and UV Explorer Missions: Development of and Field Observations with Delta-doped Arrays
A number of exciting concepts are under development for Flagship, Probe class, Explorer class, and Suborbital class NASA missions in the ultraviolet/optical spectral ranges. These missions will depend on high performance silicon detector arrays being delivered affordably and in high numbers. In a focused effort we have advanced delta-doping technology to high throughput and high yield wafer-scale processing, encompassing a multitude of state-of-the-art silicon-based detector formats and designs. As part of this technology advancement and in preparation for upcoming missions, we have embarked on a number of field observations, instrument integrations, and independent evaluations of delta-doped arrays. In this paper, we present recent data and innovations from the Advanced Detectors and Systems program at JPL, including two-dimensional doping technology; our end-to-end post-fabrication processing of high performance UV/Optical/NIR arrays; and advanced coatings for detectors and optical elements. Additionally, we present examples of past, in-progress, and planned observations and deployments of delta-doped arrays.
- Open Access
Single Photon Counting UV Solar-Blind Detectors Using Silicon and III-Nitride Materials
Ultraviolet (UV) studies in astronomy, cosmology, planetary studies, biological and medical applications often require precision detection of faint objects and in many cases require photon-counting detection. We present an overview of two approaches for achieving photon counting in the UV. The first approach involves UV enhancement of photon-counting silicon detectors, including electron multiplying charge-coupled devices and avalanche photodiodes. The approach used here employs molecular beam epitaxy for delta doping and superlattice doping for surface passivation and high UV quantum efficiency. Additional UV enhancements include antireflection (AR) and solar-blind UV bandpass coatings prepared by atomic layer deposition. Quantum efficiency (QE) measurements show QE > 50% in the 100–300 nm range for detectors with simple AR coatings, and QE ≅ 80% at ~206 nm has been shown when more complex AR coatings are used. The second approach is based on avalanche photodiodes in III-nitride materials with high QE and intrinsic solar blindness.
Open AccessSingle Photon Counting UV Solar-Blind Detectors Using Silicon and III-Nitride Materials
Ultraviolet (UV) studies in astronomy, cosmology, planetary studies, biological and medical applications often require precision detection of faint objects and in many cases require photon-counting detection. We present an overview of two approaches for achieving photon counting in the UV. The first approach involves UV enhancement of photon-counting silicon detectors, including electron multiplying charge-coupled devices and avalanche photodiodes. The approach used here employs molecular beam epitaxy for delta doping and superlattice doping for surface passivation and high UV quantum efficiency. Additional UV enhancements include antireflection (AR) and solar-blind UV bandpass coatings prepared by atomic layer deposition. Quantum efficiency (QE) measurements show QE > 50% in the 100–300 nm range for detectors with simple AR coatings, and QE ≅ 80% at ~206 nm has been shown when more complex AR coatings are used. The second approach is based on avalanche photodiodes in III-nitride materials with high QE and intrinsic solar blindness.
- 20 January 2012
- Published by Optica Publishing Group in Applied Optics
- Vol. 51 (3) , 365-369
Delta-doped electron-multiplied CCD with absolute quantum efficiency over 50% in the near to far ultraviolet range for single photon counting applications
We have used molecular beam epitaxy (MBE) based delta-doping technology to demonstrate nearly 100% internal quantum efficiency (QE) on silicon electron-multiplied charge-coupled devices (EMCCDs) for single photon counting detection applications. We used atomic layer deposition (ALD) for antireflection (AR) coatings and achieved atomic-scale control over the interfaces and thin film materials parameters. By combining the precision control of MBE and ALD, we have demonstrated more than 50% external QE in the far and near ultraviolet in megapixel arrays. We have demonstrated that other important device performance parameters such as dark current are unchanged after these processes. In this paper, we briefly review ultraviolet detection, report on these results, and briefly discuss the techniques and processes employed.
- 20 January 2012
- Published by Optica Publishing Group in Applied Optics
- Vol. 51 (3) , 365-369
Delta-doped electron-multiplied CCD with absolute quantum efficiency over 50% in the near to far ultraviolet range for single photon counting applications
We have used molecular beam epitaxy (MBE) based delta-doping technology to demonstrate nearly 100% internal quantum efficiency (QE) on silicon electron-multiplied charge-coupled devices (EMCCDs) for single photon counting detection applications. We used atomic layer deposition (ALD) for antireflection (AR) coatings and achieved atomic-scale control over the interfaces and thin film materials parameters. By combining the precision control of MBE and ALD, we have demonstrated more than 50% external QE in the far and near ultraviolet in megapixel arrays. We have demonstrated that other important device performance parameters such as dark current are unchanged after these processes. In this paper, we briefly review ultraviolet detection, report on these results, and briefly discuss the techniques and processes employed.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7742
Characterization of a ??-based CMOS monolithic detector
This paper is a progress report of the design and characterization of a monolithic CMOS detector with an on-chip ΣΔ ADC. A brief description of the design and operation is given. Backside processing steps to allow for backside illumination are summarized. Current characterization results are given for pre- and post-thinned detectors. Characterization results include measurements of: gain photodiode capacitance, dark current, linearity, well depth, relative quantum efficiency, and read noise. Lastly, a detector re-design is described; and initial measurements of its photodiode capacitance and read noise are presented.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7742
Characterization of a ??-based CMOS monolithic detector
This paper is a progress report of the design and characterization of a monolithic CMOS detector with an on-chip ΣΔ ADC. A brief description of the design and operation is given. Backside processing steps to allow for backside illumination are summarized. Current characterization results are given for pre- and post-thinned detectors. Characterization results include measurements of: gain photodiode capacitance, dark current, linearity, well depth, relative quantum efficiency, and read noise. Lastly, a detector re-design is described; and initial measurements of its photodiode capacitance and read noise are presented.