Takeshi Kawae
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Takeshi Kawae has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
Akiharu Morimoto
Graduate School of Natural Science and Technology, Kanazawa University, Kakuma-machi, Kanazawa, Ishikawa 920-1192, Japan
9 shared publicationsTakashi Nakajima
Tokyo University of Science
7 shared publications- Norio Tokuda
Nanomaterials Research Institute, Kanazawa University 3 , Kanazawa, Ishikawa 920-1192
3 shared publications - Soichiro Okamura
Tokyo Univ Sci, Katsushika Ku, Tokyo 1258585, Japan
3 shared publications - Akiharu Morimoto
College of Science and Engineering Kanazawa University Kakuma‐machi Kanazawa Ishikawa 920‐1192 Japan
2 shared publications Hiroki Kawasaki
Graduate School of Natural Science and Technology, Kanazawa University, Kanazawa 920-1192, Japan
2 shared publications
Latest Publications
- 1 November 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (11) , 11SP29
Deposition of c-axis oriented YBa 2 Cu 3 O 7−x thin film on Si substrates using self-oriented LaNiO 3 film
We fabricated c -axis oriented YBa 2 Cu 3 O 7-x (YBCO) thin films on Si substrates using a self-oriented LaNiO 3 (LNO) film as a conductive template layer formed by chemical solution deposition. The crystallinity and orientation of self-oriented LNO film on Si substrate was relatively stable during annealing under vacuum; however, the films partially decomposed into La 2 NiO 4 and La 3 Ni 2 O 7 . To suppress Ni diffusion from the self-oriented LNO layer, we inserted a conductive SrRuO 3 buffer layer between the YBCO and LNO layers. The YBCO thin film deposited on the SRO/LNO/Si substrate indicated good crystallinity and c -axis orientation. The multi-layered film structure demonstrated good superconducting properties. These results demonstrate that a self-oriented LNO film combined with an SRO buffer can serve as an effective template for the growth of YBCO thin film on Si substrates.
- 1 November 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (11) , 11SP29
Deposition of c-axis oriented YBa 2 Cu 3 O 7−x thin film on Si substrates using self-oriented LaNiO 3 film
We fabricated c -axis oriented YBa 2 Cu 3 O 7-x (YBCO) thin films on Si substrates using a self-oriented LaNiO 3 (LNO) film as a conductive template layer formed by chemical solution deposition. The crystallinity and orientation of self-oriented LNO film on Si substrate was relatively stable during annealing under vacuum; however, the films partially decomposed into La 2 NiO 4 and La 3 Ni 2 O 7 . To suppress Ni diffusion from the self-oriented LNO layer, we inserted a conductive SrRuO 3 buffer layer between the YBCO and LNO layers. The YBCO thin film deposited on the SRO/LNO/Si substrate indicated good crystallinity and c -axis orientation. The multi-layered film structure demonstrated good superconducting properties. These results demonstrate that a self-oriented LNO film combined with an SRO buffer can serve as an effective template for the growth of YBCO thin film on Si substrates.
- 1 October 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (10) , 10SP29
High-speed micropatterning of oxide thin films by water lift-off with high-pressure water jet
We performed selective growth of SrRuO 3 and YBa 2 Cu 3 O 7−x (YBCO) thin films using a water lift-off process in which an amorphous SrCO 3 sacrificial layer was rapidly removed by high-pressure water jet (HPWJ) treatment. A clear correlation was observed between the process parameters (water pressure, scanning speed and number of scanning cycles) of HPWJ treatment and the roughness (R a ) of the substrate surface after HPWJ treatment. A characteristic parameter ( K cp ) was defined based on these process parameters. K cp was clearly correlated with R a . Carbonated water dipping before HPWJ treatment enabled efficient removal of the sacrificial layer. We also applied HPWJ treatment to YBCO thin film, which is known to have low water resistance. Lines of c -axis-oriented YBCO thin film with widths of 30–100 μ m were fabricated on substrates by HPWJ treatment for 270 s. The prepared YBCO film lines possessed relatively high crystallinity and superconductivity.
- 1 October 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (10) , 10SP29
High-speed micropatterning of oxide thin films by water lift-off with high-pressure water jet
We performed selective growth of SrRuO 3 and YBa 2 Cu 3 O 7−x (YBCO) thin films using a water lift-off process in which an amorphous SrCO 3 sacrificial layer was rapidly removed by high-pressure water jet (HPWJ) treatment. A clear correlation was observed between the process parameters (water pressure, scanning speed and number of scanning cycles) of HPWJ treatment and the roughness (R a ) of the substrate surface after HPWJ treatment. A characteristic parameter ( K cp ) was defined based on these process parameters. K cp was clearly correlated with R a . Carbonated water dipping before HPWJ treatment enabled efficient removal of the sacrificial layer. We also applied HPWJ treatment to YBCO thin film, which is known to have low water resistance. Lines of c -axis-oriented YBCO thin film with widths of 30–100 μ m were fabricated on substrates by HPWJ treatment for 270 s. The prepared YBCO film lines possessed relatively high crystallinity and superconductivity.
- Open Access
- 1 July 2024
- Published by Ceramic Society of Japan in Journal of the Ceramic Society of Japan
- Vol. 132 (7) , 460-464
Unique growth of self-oriented LaNiO3 thin films prepared by a chemical solution deposition method
We investigated the relationship between the self-orientation and process conditions of self-oriented LaNiO3 (LNO) thin films fabricated by a chemical solution deposition method. The LNO thin films were deposited on Pt-coated Si, SiO2/Si, glass, c-plane sapphire, and stainless-steel substrates, which have crystal structures different from that of LNO. Increasing the heating rate during the transition from 200 °C (pre-heating) to 380 °C (pyrolysis) enhanced the self-orientation of the resulting LNO thin films. The LNO thin films deposited on the various substrate materials exhibited (h00) self-oriented growth because Pb(Zr0.52Ti0.48)O3 (PZT) thin films deposited on the self-oriented LNO thin films clearly adopted the (h00) preferential orientation. As a unique behavior of PZT/LNO bilayer structures, the PZT upper layer has stronger (h00) oriented growth than that of the underlying self-oriented LNO layer.
- 1 July 2024
- Published by Ceramic Society of Japan in Journal of the Ceramic Society of Japan
- Vol. 132 (7) , 460-464
Open AccessUnique growth of self-oriented LaNiO3 thin films prepared by a chemical solution deposition method
We investigated the relationship between the self-orientation and process conditions of self-oriented LaNiO3 (LNO) thin films fabricated by a chemical solution deposition method. The LNO thin films were deposited on Pt-coated Si, SiO2/Si, glass, c-plane sapphire, and stainless-steel substrates, which have crystal structures different from that of LNO. Increasing the heating rate during the transition from 200 °C (pre-heating) to 380 °C (pyrolysis) enhanced the self-orientation of the resulting LNO thin films. The LNO thin films deposited on the various substrate materials exhibited (h00) self-oriented growth because Pb(Zr0.52Ti0.48)O3 (PZT) thin films deposited on the self-oriented LNO thin films clearly adopted the (h00) preferential orientation. As a unique behavior of PZT/LNO bilayer structures, the PZT upper layer has stronger (h00) oriented growth than that of the underlying self-oriented LNO layer.
- 15 September 2017
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 56 (10S) , 10PF06
B-doped diamond field-effect transistor with ferroelectric vinylidene fluoride–trifluoroethylene gate insulator
A B-doped diamond field-effect transistor (FET) with a ferroelectric vinylidene fluoride–trifluoroethylene (VDF–TrFE) copolymer gate insulator was fabricated. The VDF–TrFE film deposited on the B-doped diamond showed good insulating and ferroelectric properties. Also, a Pt/VDF–TrFE/B-doped diamond layered structure showed ideal behavior as a metal–ferroelectric–semiconductor (MFS) capacitor, and the memory window width was 11 V, when the gate voltage was swept from 20 to −20 V. The fabricated MFS-type FET structure showed the typical properties of a depletion-type p-channel FET and a maximum drain current density of 0.87 mA/mm at room temperature. The drain current versus gate voltage curves of the proposed FET showed a clockwise hysteresis loop owing to the ferroelectricity of the VDF–TrFE gate insulator. In addition, we demonstrated the logic inverter with the MFS-type diamond FET coupled with a load resistor, and obtained the inversion behavior of the input signal and a maximum gain of 18.4 for the present circuit.
- 15 September 2017
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 56 (10S) , 10PF06
B-doped diamond field-effect transistor with ferroelectric vinylidene fluoride–trifluoroethylene gate insulator
A B-doped diamond field-effect transistor (FET) with a ferroelectric vinylidene fluoride–trifluoroethylene (VDF–TrFE) copolymer gate insulator was fabricated. The VDF–TrFE film deposited on the B-doped diamond showed good insulating and ferroelectric properties. Also, a Pt/VDF–TrFE/B-doped diamond layered structure showed ideal behavior as a metal–ferroelectric–semiconductor (MFS) capacitor, and the memory window width was 11 V, when the gate voltage was swept from 20 to −20 V. The fabricated MFS-type FET structure showed the typical properties of a depletion-type p-channel FET and a maximum drain current density of 0.87 mA/mm at room temperature. The drain current versus gate voltage curves of the proposed FET showed a clockwise hysteresis loop owing to the ferroelectricity of the VDF–TrFE gate insulator. In addition, we demonstrated the logic inverter with the MFS-type diamond FET coupled with a load resistor, and obtained the inversion behavior of the input signal and a maximum gain of 18.4 for the present circuit.
- 13 June 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 108 (24) , 242101
H-terminated diamond field effect transistor with ferroelectric gate insulator
An H-terminated diamond field-effect-transistor (FET) with a ferroelectric vinylidene fluoride (VDF)-trifluoroethylene (TrFE) copolymer gate insulator was fabricated. The VDF-TrFE film was deposited on the H-terminated diamond by the spin-coating method and low-temperature annealing was performed to suppress processing damage to the H-terminated diamond surface channel layer. The fabricated FET structure showed the typical properties of depletion-type p-channel FET and showed clear saturation of the drain current with a maximum value of 50 mA/mm. The drain current versus gate voltage curves of the proposed FET showed clockwise hysteresis loops due to the ferroelectricity of the VDF-TrFE gate insulator, and the memory window width was 19 V, when the gate voltage was swept from 20 to −20 V. The maximum on/off current ratio and the linear mobility were 108 and 398 cm2/V s, respectively. In addition, we modulated the drain current of the fabricated FET structure via the remnant polarization of the VDF-TrFE gate and obtained an on/off current ratio of 103 without applying a DC gate voltage.
- 13 June 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 108 (24) , 242101
H-terminated diamond field effect transistor with ferroelectric gate insulator
An H-terminated diamond field-effect-transistor (FET) with a ferroelectric vinylidene fluoride (VDF)-trifluoroethylene (TrFE) copolymer gate insulator was fabricated. The VDF-TrFE film was deposited on the H-terminated diamond by the spin-coating method and low-temperature annealing was performed to suppress processing damage to the H-terminated diamond surface channel layer. The fabricated FET structure showed the typical properties of depletion-type p-channel FET and showed clear saturation of the drain current with a maximum value of 50 mA/mm. The drain current versus gate voltage curves of the proposed FET showed clockwise hysteresis loops due to the ferroelectricity of the VDF-TrFE gate insulator, and the memory window width was 19 V, when the gate voltage was swept from 20 to −20 V. The maximum on/off current ratio and the linear mobility were 108 and 398 cm2/V s, respectively. In addition, we modulated the drain current of the fabricated FET structure via the remnant polarization of the VDF-TrFE gate and obtained an on/off current ratio of 103 without applying a DC gate voltage.
- 28 March 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 108 (13) , 132903
Electrical characteristics of MoS2 field-effect transistor with ferroelectric vinylidene fluoride-trifluoroethylene copolymer gate structure
Ferroelectric field-effect transistors (FeFET) based on MoS2 have recently been shown to exhibit considerable potential for use in nano sized non-volatile memory devices. Here, we demonstrated fabrication and characterization of FeFET based on MoS2 channel with vinylidene fluoride (VDF)-trifluoroethylene (TrFE) copolymer as back-gate insulator. In this device, counterclockwise hysteresis behavior was observed in the drain current–gate voltage curve, which is indicative of interaction between MoS2 carrier modulation and ferroelectric polarization switching. Furthermore, our VDF-TrFE/MoS2 FeFET exhibited only n-type behavior, a maximum linear mobility of 625 cm2/V s, a large memory window width of 16 V, and a high on/off current ratio of 8 × 105.
- 28 March 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 108 (13) , 132903
Electrical characteristics of MoS2 field-effect transistor with ferroelectric vinylidene fluoride-trifluoroethylene copolymer gate structure
Ferroelectric field-effect transistors (FeFET) based on MoS2 have recently been shown to exhibit considerable potential for use in nano sized non-volatile memory devices. Here, we demonstrated fabrication and characterization of FeFET based on MoS2 channel with vinylidene fluoride (VDF)-trifluoroethylene (TrFE) copolymer as back-gate insulator. In this device, counterclockwise hysteresis behavior was observed in the drain current–gate voltage curve, which is indicative of interaction between MoS2 carrier modulation and ferroelectric polarization switching. Furthermore, our VDF-TrFE/MoS2 FeFET exhibited only n-type behavior, a maximum linear mobility of 625 cm2/V s, a large memory window width of 16 V, and a high on/off current ratio of 8 × 105.
- 1 January 2015
- Published by The Electrochemical Society in ECS Solid State Letters
- Vol. 4 (5) , N1-N4
Effects of SrRuO3 Layer on Retention Properties of (Bi,Pr)(Fe,Mn)O3 Film Capacitor at High Temperature
We investigated the effects of a SrRuO3 (SRO) layer on the retention properties of (Bi,Pr)(Fe,Mn)O3 (BPFM) film capacitors under high temperature conditions. The dielectric constant of the BPFM film capacitor was increased by the introduction of the SRO layer. In addition, the Pt/BPFM/SRO/Pt capacitor showed polarization losses of only 6.4% in both polarization directions after a retention time of 104 s at 400°C, resulting in symmetrical switching behavior. These results imply that the introduction of the SRO layer is effective in suppression of the formation of an interfacial layer between BPFM and Pt.
- 1 January 2015
- Published by The Electrochemical Society in ECS Solid State Letters
- Vol. 4 (5) , N1-N4
Effects of SrRuO3 Layer on Retention Properties of (Bi,Pr)(Fe,Mn)O3 Film Capacitor at High Temperature
We investigated the effects of a SrRuO3 (SRO) layer on the retention properties of (Bi,Pr)(Fe,Mn)O3 (BPFM) film capacitors under high temperature conditions. The dielectric constant of the BPFM film capacitor was increased by the introduction of the SRO layer. In addition, the Pt/BPFM/SRO/Pt capacitor showed polarization losses of only 6.4% in both polarization directions after a retention time of 104 s at 400°C, resulting in symmetrical switching behavior. These results imply that the introduction of the SRO layer is effective in suppression of the formation of an interfacial layer between BPFM and Pt.
- 17 February 2014
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 8 (6) , 536-539
Retention properties with high‐temperature resistance in (Bi,Pr)(Fe,Mn)O3 thin film capacitor
- 17 February 2014
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 8 (6) , 536-539
Retention properties with high‐temperature resistance in (Bi,Pr)(Fe,Mn)O3 thin film capacitor
- 1 September 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (9S1) , 09LE10
Polarization-Induced Photovoltaic Effects in Nd-Doped BiFeO3Ferroelectric Thin Films
- 1 September 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (9S1) , 09LE10
Polarization-Induced Photovoltaic Effects in Nd-Doped BiFeO3Ferroelectric Thin Films
- 1 September 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (9S1) , 09LA08
Fabrication of (Bi,Pr)(Fe,Mn)O3Thin Films on Polycrystalline Diamond Substrates by Chemical Solution Deposition and Their Properties
(Bi,Pr)(Fe,Mn)O3 (BPFM) thin films were deposited on the conductive B-doped diamond coated polycrystalline diamond substrates by chemical solution deposition method. BPFM thin films were crystallized with random orientation on the polycrystalline diamond. The BPFM/B-doped diamond layered film showed polarization vs electric field (P–E) hysteresis loops without any influences of leakage current at room temperature. The remnant polarization 2Pr and the coercive field 2Ec at the maximum electric field of 1000 kV/cm were 135 µC/cm2 and 700 kV/cm, respectively. In the range of room temperature to 130 °C, the prepared film capacitor showed saturated-loop shape in the P–E curve without influences of leakage current.
- 1 September 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (9S1) , 09LA08
Fabrication of (Bi,Pr)(Fe,Mn)O3Thin Films on Polycrystalline Diamond Substrates by Chemical Solution Deposition and Their Properties
(Bi,Pr)(Fe,Mn)O3 (BPFM) thin films were deposited on the conductive B-doped diamond coated polycrystalline diamond substrates by chemical solution deposition method. BPFM thin films were crystallized with random orientation on the polycrystalline diamond. The BPFM/B-doped diamond layered film showed polarization vs electric field (P–E) hysteresis loops without any influences of leakage current at room temperature. The remnant polarization 2Pr and the coercive field 2Ec at the maximum electric field of 1000 kV/cm were 135 µC/cm2 and 700 kV/cm, respectively. In the range of room temperature to 130 °C, the prepared film capacitor showed saturated-loop shape in the P–E curve without influences of leakage current.