Maria Rosa Martinez-Tarazona
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maria Rosa Martinez-Tarazona has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Maria Antonia Lopez-Anton
Instituto de Ciencia y Tecnología del Carbono, INCAR-CSIC, c/Francisco Pintado Fe, 26, 33011 Oviedo, Spain
8 shared publications - Roberto García
Instituto Nacional del Carbón, CSIC, Apartado 73, 33080 Oviedo, Spain
6 shared publications - Mercedes Díaz-Somoano
Instituto Nacional del Carbón (CSIC), Francisco Pintado Fe, 26, 33011 Oviedo, Spain
5 shared publications - Elena Rodríguez
Instituto de Ciencia y Tecnología del Carbono, INCAR-CSIC, c/Francisco Pintado Fe, 26, 33011 Oviedo, Spain
4 shared publications - Ana Arenillas
Instituto de Ciencia y Tecnología del Carbono, INCAR-CSIC, 33011 Oviedo, Spain
2 shared publications - Ana Beatriz García
Instituto de Ciencia y Tecnología del Carbono, INCAR-CSIC, Francisco Pintado Fe 26, 33011 Oviedo, Spain
1 shared publication
Latest Publications
- Open Access
Sustainable Carbon Materials from Sucrose as Anodes for Sodium-Ion Batteries
The implementation of sodium-ion batteries for renewable energy storage requires the development of sustainable electrode materials. Usually, these materials are produced through complex energy-intensive processes that are challenging to scale and involve expensive and/or toxic reagents. In this study, sustainable hard carbon materials, some doped with iron, synthesized from sucrose using a simple, fast, and cost-effective two-step eco-friendly process, are investigated as anodes for sodium-ion batteries. The influence of physicochemical and structural material properties on electrode reversible capacity, cycling stability, and efficiency is analyzed. The SC900 material, which exhibits a certain development of graphite-like structure, though not strictly graphitic, showed the best electrochemical performance, providing discharge capacities exceeding 100 mAh g−1 after 400 cycles with excellent cycling stability and high coulombic efficiency. The capacity of the materials increases as d002 decreases, (i.e., as the degree of structural order increases), to the optimum value of ~0.3700 nm. However, a further decrease in d002 to values characteristic of quasi-graphitic materials, as a consequence of the catalytic effect of iron, hinders Na+-ion storage, which, in addition to the low electrochemical activity of the iron oxides present, leads to much lower capacities.
Open AccessSustainable Carbon Materials from Sucrose as Anodes for Sodium-Ion Batteries
The implementation of sodium-ion batteries for renewable energy storage requires the development of sustainable electrode materials. Usually, these materials are produced through complex energy-intensive processes that are challenging to scale and involve expensive and/or toxic reagents. In this study, sustainable hard carbon materials, some doped with iron, synthesized from sucrose using a simple, fast, and cost-effective two-step eco-friendly process, are investigated as anodes for sodium-ion batteries. The influence of physicochemical and structural material properties on electrode reversible capacity, cycling stability, and efficiency is analyzed. The SC900 material, which exhibits a certain development of graphite-like structure, though not strictly graphitic, showed the best electrochemical performance, providing discharge capacities exceeding 100 mAh g−1 after 400 cycles with excellent cycling stability and high coulombic efficiency. The capacity of the materials increases as d002 decreases, (i.e., as the degree of structural order increases), to the optimum value of ~0.3700 nm. However, a further decrease in d002 to values characteristic of quasi-graphitic materials, as a consequence of the catalytic effect of iron, hinders Na+-ion storage, which, in addition to the low electrochemical activity of the iron oxides present, leads to much lower capacities.
- Open Access
Sorption of Selenium(IV) and Selenium(VI) onto Iron Oxide/Hydroxide-Based Carbon Materials: Activated Carbon and Carbon Foam
Selenium pollution in water is a worldwide issue. Se(IV) and Se(VI) are mainly found in contaminated water due to their high solubility and mobility; their presence poses a serious risk as they can severely harm human health. Although iron oxide and hydroxide nanoparticles can be efficient candidates for the removal of selenium oxyanions due to their high adsorption capacity, the role of each iron species has not been fully elucidated. Furthermore, iron species are often found to be less effective for Se(VI) than Se(IV). The challenge and novelty of this study was to develop a carbon material impregnated with different iron phases, including oxides (magnetite/hematite) and hydroxides (goethite/lepidocrocite) capable of removing both Se(IV) and Se(VI). Since the phase and morphology of the iron nanoparticles play a significant role in Se adsorption, the study evaluated both characteristics by modifying the impregnation method, which is based on an oxidative hydrolysis with FeSO4 7H2O and CH3COONa, and the type of carbonaceous support (activated carbon or sucrose-based carbon foam). Impregnated activated carbons provide better removal efficiencies (70–80%) than carbon foams (<40%), due to their high surface areas and point zero charges. These results show that the adsorption of Se(VI) is more favorable on magnetic oxides (78%) and hydroxides (71%) than in hematite (<40%). In addition, the activated carbon decorated with magnetite showed a high adsorption capacity for both selenium species, even in alkaline conditions, when the sorbent surface is negatively charged. A mechanism based on the adsorption of inner-sphere complexes was suggested for Se(IV) immobilization, whereas Se(VI) removal occurred through the formation of outer-sphere complexes and redox processes.
Open AccessSorption of Selenium(IV) and Selenium(VI) onto Iron Oxide/Hydroxide-Based Carbon Materials: Activated Carbon and Carbon Foam
Selenium pollution in water is a worldwide issue. Se(IV) and Se(VI) are mainly found in contaminated water due to their high solubility and mobility; their presence poses a serious risk as they can severely harm human health. Although iron oxide and hydroxide nanoparticles can be efficient candidates for the removal of selenium oxyanions due to their high adsorption capacity, the role of each iron species has not been fully elucidated. Furthermore, iron species are often found to be less effective for Se(VI) than Se(IV). The challenge and novelty of this study was to develop a carbon material impregnated with different iron phases, including oxides (magnetite/hematite) and hydroxides (goethite/lepidocrocite) capable of removing both Se(IV) and Se(VI). Since the phase and morphology of the iron nanoparticles play a significant role in Se adsorption, the study evaluated both characteristics by modifying the impregnation method, which is based on an oxidative hydrolysis with FeSO4 7H2O and CH3COONa, and the type of carbonaceous support (activated carbon or sucrose-based carbon foam). Impregnated activated carbons provide better removal efficiencies (70–80%) than carbon foams (<40%), due to their high surface areas and point zero charges. These results show that the adsorption of Se(VI) is more favorable on magnetic oxides (78%) and hydroxides (71%) than in hematite (<40%). In addition, the activated carbon decorated with magnetite showed a high adsorption capacity for both selenium species, even in alkaline conditions, when the sorbent surface is negatively charged. A mechanism based on the adsorption of inner-sphere complexes was suggested for Se(IV) immobilization, whereas Se(VI) removal occurred through the formation of outer-sphere complexes and redox processes.
- 28 August 2023
- Published by University of the Aegean
Removal Of Selenium From Polluted Water By Fexoy-Sucrose Foams
- 28 August 2023
- Published by University of the Aegean
Removal Of Selenium From Polluted Water By Fexoy-Sucrose Foams
- Open Access
Synthesis of Micro- and Mesoporous Carbon Foams with Nanodispersed Metals for Adsorption and Catalysis Applications
This work focuses on carbon foams, whose peculiarity is a predominant open macroporous cellular network that can be provided with tailored texture and morphology by the modification of the preparation process. The goal was to obtain macroporous carbonaceous structures capable of being activated by following a simple thermo-foaming procedure using a few reagents. With this purpose in mind, carbon foams with different textural properties were synthesized from sucrose using two foaming processes: at atmospheric pressure and in a pressurized reactor. Iron and silver nitrates added to sucrose gave rise, after carbonization, to materials with iron oxides and elemental silver particles nano-dispersed in the carbon matrix and promoted microporosity in both cases and mesoporosity in the case of iron nitrate. Iron nitrate also catalyzes the graphitization of the carbon material during carbonization. All these findings show the potential of sucrose thermo-foaming process as a viable and sustainable path to produce versatile carbon materials, capable of being used in various applications.
Open AccessSynthesis of Micro- and Mesoporous Carbon Foams with Nanodispersed Metals for Adsorption and Catalysis Applications
This work focuses on carbon foams, whose peculiarity is a predominant open macroporous cellular network that can be provided with tailored texture and morphology by the modification of the preparation process. The goal was to obtain macroporous carbonaceous structures capable of being activated by following a simple thermo-foaming procedure using a few reagents. With this purpose in mind, carbon foams with different textural properties were synthesized from sucrose using two foaming processes: at atmospheric pressure and in a pressurized reactor. Iron and silver nitrates added to sucrose gave rise, after carbonization, to materials with iron oxides and elemental silver particles nano-dispersed in the carbon matrix and promoted microporosity in both cases and mesoporosity in the case of iron nitrate. Iron nitrate also catalyzes the graphitization of the carbon material during carbonization. All these findings show the potential of sucrose thermo-foaming process as a viable and sustainable path to produce versatile carbon materials, capable of being used in various applications.
- Open Access
A New Approach for Retaining Mercury in Energy Generation Processes: Regenerable Carbonaceous Sorbents
The energy production processes from fossil fuels represent the first anthropogenic source of mercury emissions in Europe and the second in the world. Among the different possibilities that can be posed to reduce these emissions, this work focuses on the use of regenerable sorbents based on gold nanoparticles dispersed on activated carbon foam. The use of regenerable sorbents would not only allow the objective of reducing mercury emissions, but also avoiding the generation of new toxic wastes. The results showed a retention efficiency of 100% and a retention capacity close to 600 µg·g−1 over several cycles of regeneration. Moreover, acid gases did not poison the support. It was observed that mercury capture in this simulated oxy-combustion atmosphere was a consequence of two mechanisms: (1) the amalgamation of elemental mercury and elemental gold and (2) the oxidation of elemental mercury in the presence of HCl, with the subsequent retention of the oxidized mercury on the surface of the activated carbon foam. The nanodispersion of gold on such supports involves a high initial investment. However, this would be counterbalanced by the remarkable regeneration capacity of the sorbent and the possibility of recovering all the materials used.
Open AccessA New Approach for Retaining Mercury in Energy Generation Processes: Regenerable Carbonaceous Sorbents
The energy production processes from fossil fuels represent the first anthropogenic source of mercury emissions in Europe and the second in the world. Among the different possibilities that can be posed to reduce these emissions, this work focuses on the use of regenerable sorbents based on gold nanoparticles dispersed on activated carbon foam. The use of regenerable sorbents would not only allow the objective of reducing mercury emissions, but also avoiding the generation of new toxic wastes. The results showed a retention efficiency of 100% and a retention capacity close to 600 µg·g−1 over several cycles of regeneration. Moreover, acid gases did not poison the support. It was observed that mercury capture in this simulated oxy-combustion atmosphere was a consequence of two mechanisms: (1) the amalgamation of elemental mercury and elemental gold and (2) the oxidation of elemental mercury in the presence of HCl, with the subsequent retention of the oxidized mercury on the surface of the activated carbon foam. The nanodispersion of gold on such supports involves a high initial investment. However, this would be counterbalanced by the remarkable regeneration capacity of the sorbent and the possibility of recovering all the materials used.
- Open Access
- 6 July 2017
- Published by University of Maribor
- p. 59-68
Carbon-Based Sorbents Impregnated with Iron Oxides for Removing Mercury in Energy Generation Processes
- 6 July 2017
- Published by University of Maribor
- p. 59-68
Open AccessCarbon-Based Sorbents Impregnated with Iron Oxides for Removing Mercury in Energy Generation Processes
- 31 January 2012
- Published by Elsevier in International Journal of Coal Geology
- Vol. 94, 44-53
Analytical methods for mercury analysis in coal and coal combustion by-products
- 31 January 2012
- Published by Elsevier in International Journal of Coal Geology
- Vol. 94, 44-53
Analytical methods for mercury analysis in coal and coal combustion by-products
- 18 February 2002
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 77 (3) , 396-402
Retention of trace elements using fly ash in a coal gasification flue gas
- 18 February 2002
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 77 (3) , 396-402
Retention of trace elements using fly ash in a coal gasification flue gas