Yue'E Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yue'E Fang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Li Liu
Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China
5 shared publicationsWei Luo
Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, People's Republic of China
3 shared publicationsYu Li
Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, People's Republic of China
3 shared publications- Meifang Huang
Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, People's Republic of China
2 shared publications Peng Chen
Department of Polymer Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, People's Republic of China
2 shared publicationsXiaofeng Shen
Department of Chemistry, Anhui University, Hefei, Anhui 230039, People's Republic of China
2 shared publications
Latest Publications
- 30 November 2006
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 27 (23) , 1988-1994
Self‐Catalysis of Phthaloylchitosan for Graft Copolymerization of ε‐Caprolactone with Chitosan
Summary: A protection‐graft‐deprotection method was developed to prepare chitosan‐g‐polycaprolactone graft copolymers, during which the ring‐opening copolymerization of ε‐caprolactone onto phthaloylchitosan (PHCS) happened without any additional catalysis. The intermediate PHCS was introduced primarily to protect the active amino group of chitosan. After controlled experiments, the phthalimido compound was proposed to be a novel kind of organic catalyst for the ring‐opening polymerization of caprolactone monomers, while the hydroxyl group acted as an initiator. Hence, in this graft system, PHCS was endowed with both self‐catalysis and self‐initiation at the same time, and the PCL side chains grew from the hydroxyl groups of the chitosan backbone. magnified image
- 30 November 2006
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 27 (23) , 1988-1994
Self‐Catalysis of Phthaloylchitosan for Graft Copolymerization of ε‐Caprolactone with Chitosan
Summary: A protection‐graft‐deprotection method was developed to prepare chitosan‐g‐polycaprolactone graft copolymers, during which the ring‐opening copolymerization of ε‐caprolactone onto phthaloylchitosan (PHCS) happened without any additional catalysis. The intermediate PHCS was introduced primarily to protect the active amino group of chitosan. After controlled experiments, the phthalimido compound was proposed to be a novel kind of organic catalyst for the ring‐opening polymerization of caprolactone monomers, while the hydroxyl group acted as an initiator. Hence, in this graft system, PHCS was endowed with both self‐catalysis and self‐initiation at the same time, and the PCL side chains grew from the hydroxyl groups of the chitosan backbone. magnified image
- 21 March 2006
- Published by Wiley in Biopolymers
- Vol. 82 (6) , 597-602
Facile preparation of biodegradable chitosan derivative having poly(butylene glycol adipate) side chains
Various modes are being explored for the construction of functional materials from nanoparticles. Despite these efforts, the assembly of nanoparticles remains challenging with respect to the requirement of multiple component organization on varying dimensions and length scales. The graft copolymers of chitosan with poly(butylene glycol adipate) (PBGA) were prepared due to the esterification reaction between PBGA and 6‐O‐succinate‐N‐phthaloyl‐chitosan (PHCSSA) in the presence of toluene as a swelling agent. The graft copolymers are nanoparticles with the size of few hundred nanometers as observed from TEM. It is a potential method to combine chitosan with the hydrophobic synthetic polymers. The grafting reactions were conducted with various PBGA/PHCSSA feed ratios to obtain chitosan‐g‐PBGA copolymers with various PBGA contents. FT–IR, NMR, XRD, spectrofluorophotometer, and TEM were detected to characterize the copolymers. © 2006 Wiley Periodicals, Inc. Biopolymers 82:597–602, 2006This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com
- 21 March 2006
- Published by Wiley in Biopolymers
- Vol. 82 (6) , 597-602
Facile preparation of biodegradable chitosan derivative having poly(butylene glycol adipate) side chains
Various modes are being explored for the construction of functional materials from nanoparticles. Despite these efforts, the assembly of nanoparticles remains challenging with respect to the requirement of multiple component organization on varying dimensions and length scales. The graft copolymers of chitosan with poly(butylene glycol adipate) (PBGA) were prepared due to the esterification reaction between PBGA and 6‐O‐succinate‐N‐phthaloyl‐chitosan (PHCSSA) in the presence of toluene as a swelling agent. The graft copolymers are nanoparticles with the size of few hundred nanometers as observed from TEM. It is a potential method to combine chitosan with the hydrophobic synthetic polymers. The grafting reactions were conducted with various PBGA/PHCSSA feed ratios to obtain chitosan‐g‐PBGA copolymers with various PBGA contents. FT–IR, NMR, XRD, spectrofluorophotometer, and TEM were detected to characterize the copolymers. © 2006 Wiley Periodicals, Inc. Biopolymers 82:597–602, 2006This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com
- 31 December 2005
- Published by Elsevier in Reactive and Functional Polymers
- Vol. 65 (3) , 301-308
Synthesis of a novel chitosan derivative having poly (ethylene oxide) side chains in aqueous reaction media
- 31 December 2005
- Published by Elsevier in Reactive and Functional Polymers
- Vol. 65 (3) , 301-308
Synthesis of a novel chitosan derivative having poly (ethylene oxide) side chains in aqueous reaction media
- 10 May 2005
- Published by Elsevier in Radiation Physics and Chemistry
- Vol. 74 (5) , 297-301
Preparation of chitosan/poly(butyl acrylate) hybrid materials by radiation-induced graft copolymerization based on phthaloylchitosan
- 10 May 2005
- Published by Elsevier in Radiation Physics and Chemistry
- Vol. 74 (5) , 297-301
Preparation of chitosan/poly(butyl acrylate) hybrid materials by radiation-induced graft copolymerization based on phthaloylchitosan
- 28 April 2005
- Published by Wiley in Biopolymers
- Vol. 78 (4) , 163-170
Preparation of chitosan‐g‐polycaprolactone copolymers through ring‐opening polymerization of ϵ‐caprolactone onto phthaloyl‐protected chitosan
The new biodegradable chitosan graft copolymer, chitosan‐g‐polycaprolactone, was synthesized by the ring‐opening graft copolymerization of ϵ‐caprolactone onto phthaloyl‐protected chitosan (PHCS) at the hydroxyl group in the presence of tin(II) 2‐ethylhexanoate catalyst via a protection–graft–deprotection procedure. Toluene acted as a swelling agent in this heterogeneous system. The grafting reactions were conducted with various PHCS/monomer/toluene feed ratios to obtain chitosan‐g‐polycaprolactone copolymers with various polycaprolactone contents. The chemical structure of the chitosan‐g‐polycaprolactone was characterized by Fourier transform infrared and one‐ and two‐dimensional NMR spectroscopy. After deprotection, the phthaloyl group was removed and the amino group was regenerated. Thus the obtained chitosan‐g‐polycaprolactone was an amphoteric hybrid with a large amount of free amino groups and hydrophobic polycaprolactone side chains. Some properties of the final product were also investigated, such as crystallinity, thermal property, and solubility. © 2005 Wiley Periodicals, Inc. Biopolymers, 2005
- 28 April 2005
- Published by Wiley in Biopolymers
- Vol. 78 (4) , 163-170
Preparation of chitosan‐g‐polycaprolactone copolymers through ring‐opening polymerization of ϵ‐caprolactone onto phthaloyl‐protected chitosan
The new biodegradable chitosan graft copolymer, chitosan‐g‐polycaprolactone, was synthesized by the ring‐opening graft copolymerization of ϵ‐caprolactone onto phthaloyl‐protected chitosan (PHCS) at the hydroxyl group in the presence of tin(II) 2‐ethylhexanoate catalyst via a protection–graft–deprotection procedure. Toluene acted as a swelling agent in this heterogeneous system. The grafting reactions were conducted with various PHCS/monomer/toluene feed ratios to obtain chitosan‐g‐polycaprolactone copolymers with various polycaprolactone contents. The chemical structure of the chitosan‐g‐polycaprolactone was characterized by Fourier transform infrared and one‐ and two‐dimensional NMR spectroscopy. After deprotection, the phthaloyl group was removed and the amino group was regenerated. Thus the obtained chitosan‐g‐polycaprolactone was an amphoteric hybrid with a large amount of free amino groups and hydrophobic polycaprolactone side chains. Some properties of the final product were also investigated, such as crystallinity, thermal property, and solubility. © 2005 Wiley Periodicals, Inc. Biopolymers, 2005
- 17 March 2005
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 96 (4) , 1341-1346
Synthesis and properties of starch grafted poly[acrylamide‐co‐(acrylic acid)]/montmorillonite nanosuperabsorbent via γ‐ray irradiation technique
The novel nanosuperabsorbent copolymer (NSAP) was synthesized by grafting copolymerization of acrylamide (AM) and acrylic acid (AA) onto starch with montmorillonite (MMT) initiated using 60Co γ‐ray irradiation. NSAP was characterized by IR spectroscopy and X‐ray diffraction (XRD). Different synthesis parameters were studied, such as AM‐to‐AA ratio, radiation total dose, radiation dose rate, crosslinker content, and clay content. NSAP can effectively improve the water retention capacity of soil. The effects of NSAP on crops were also studied, showing that NSAP has an encouraging potential for agricultural application. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1341–1346, 2005
- 17 March 2005
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 96 (4) , 1341-1346
Synthesis and properties of starch grafted poly[acrylamide‐co‐(acrylic acid)]/montmorillonite nanosuperabsorbent via γ‐ray irradiation technique
The novel nanosuperabsorbent copolymer (NSAP) was synthesized by grafting copolymerization of acrylamide (AM) and acrylic acid (AA) onto starch with montmorillonite (MMT) initiated using 60Co γ‐ray irradiation. NSAP was characterized by IR spectroscopy and X‐ray diffraction (XRD). Different synthesis parameters were studied, such as AM‐to‐AA ratio, radiation total dose, radiation dose rate, crosslinker content, and clay content. NSAP can effectively improve the water retention capacity of soil. The effects of NSAP on crops were also studied, showing that NSAP has an encouraging potential for agricultural application. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1341–1346, 2005
- 22 June 2004
- Published by Wiley in Polymer International
- Vol. 53 (10) , 1491-1494
Homogeneous graft copolymerization of chitosan with methyl methacrylate by γ‐irradiation via a phthaloylchitosan intermediate
The graft copolymerization of methyl methacrylate (MMA) onto chitosan was tried via a new protection‐graft‐deprotection procedure. Because the intermediate phthaloylchitosan was soluble in organic solvents, the graft copolymerization was carried out in a homogeneous system. Grafting was initiated by γ‐irradiation. The graft percentage extent was dependent on the irradiation dose and the concentration of MMA monomer, and copolymers with grafting above 100 % were readily prepared. The graft copolymers exhibited a high affinity not only for aqueous acid but also for some organic solvents. Differential scanning calorimetry measurements revealed the presence of a glass transition phenomenon, which could be ascribed to the poly(methyl methacrylate) side‐chains. Copyright © 2004 Society of Chemical Industry
- 22 June 2004
- Published by Wiley in Polymer International
- Vol. 53 (10) , 1491-1494
Homogeneous graft copolymerization of chitosan with methyl methacrylate by γ‐irradiation via a phthaloylchitosan intermediate
The graft copolymerization of methyl methacrylate (MMA) onto chitosan was tried via a new protection‐graft‐deprotection procedure. Because the intermediate phthaloylchitosan was soluble in organic solvents, the graft copolymerization was carried out in a homogeneous system. Grafting was initiated by γ‐irradiation. The graft percentage extent was dependent on the irradiation dose and the concentration of MMA monomer, and copolymers with grafting above 100 % were readily prepared. The graft copolymers exhibited a high affinity not only for aqueous acid but also for some organic solvents. Differential scanning calorimetry measurements revealed the presence of a glass transition phenomenon, which could be ascribed to the poly(methyl methacrylate) side‐chains. Copyright © 2004 Society of Chemical Industry
- 2 June 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 93 (4) , 1748-1755
Synthesis of superabsorbent polymers by irradiation and their applications in agriculture
The superabsorbent polymers (SAPs) were synthesized by grafting copolymerization of acrylic acid and acrylamide onto starch by using γ‐ray radiation technique and poly(ethylene glycol) (PEG) as a crosslinker. The samples were characterized by IR spectroscopy. The effect of various synthetic parameters such as irradiation dose, irradiation dose rate, monomer concentration, monomer/starch ratio, and PEG content were studied. The effects of different drying methods on water absorbency of the SAPs were also studied. The experimental results showed that the water absorbency of the SAPs depends largely on the specific conductance of water when the specific conductance is below 500 μs/cm. The water retention of sand and soil was enhanced by using the SAPs. Effects of the SAPs on the germination of seeds and growth of young plants were investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1748–1755, 2004
- 2 June 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 93 (4) , 1748-1755
Synthesis of superabsorbent polymers by irradiation and their applications in agriculture
The superabsorbent polymers (SAPs) were synthesized by grafting copolymerization of acrylic acid and acrylamide onto starch by using γ‐ray radiation technique and poly(ethylene glycol) (PEG) as a crosslinker. The samples were characterized by IR spectroscopy. The effect of various synthetic parameters such as irradiation dose, irradiation dose rate, monomer concentration, monomer/starch ratio, and PEG content were studied. The effects of different drying methods on water absorbency of the SAPs were also studied. The experimental results showed that the water absorbency of the SAPs depends largely on the specific conductance of water when the specific conductance is below 500 μs/cm. The water retention of sand and soil was enhanced by using the SAPs. Effects of the SAPs on the germination of seeds and growth of young plants were investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1748–1755, 2004
- 1 May 2004
- Published by Elsevier in Carbohydrate Polymers
Rapid N-phthaloylation of chitosan by microwave irradiation
- 1 May 2004
- Published by Elsevier in Carbohydrate Polymers
Rapid N-phthaloylation of chitosan by microwave irradiation
- 29 September 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 90 (10) , 2855-2860
Study of radiation‐induced graft copolymerization of butyl acrylate onto chitosan in acetic acid aqueous solution
The graft copolymerization of butyl acrylate onto chitosan in acetic acid aqueous solution was investigated, using the γ‐ray of 60Co γ‐irradiation method. Fourier transform infrared spectra analysis, X‐ray diffraction analysis, and scanning electron microscopy characterized the graft copolymer. The effect of synthesis variables in the graft copolymerization have been discussed in the light of grafting efficiency, grafting percentage, and homopolymer percentage. Hydrophilicity and impact strength of the films formed from copolymer solution were tested and their feasibility as seed coating was studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2855–2860, 2003
- 29 September 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 90 (10) , 2855-2860
Study of radiation‐induced graft copolymerization of butyl acrylate onto chitosan in acetic acid aqueous solution
The graft copolymerization of butyl acrylate onto chitosan in acetic acid aqueous solution was investigated, using the γ‐ray of 60Co γ‐irradiation method. Fourier transform infrared spectra analysis, X‐ray diffraction analysis, and scanning electron microscopy characterized the graft copolymer. The effect of synthesis variables in the graft copolymerization have been discussed in the light of grafting efficiency, grafting percentage, and homopolymer percentage. Hydrophilicity and impact strength of the films formed from copolymer solution were tested and their feasibility as seed coating was studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2855–2860, 2003