Rachel Eloirdi
Research Subjects
Rachel Eloirdi has a total of 142 co-authors. Here are the top co-authors by number of shared publications:
- Roberto Caciuffo
Istituto Nazionale di Fisica Nucleare
8 shared publications - Alexander B. Shick
Institute of Physics
6 shared publications J.-C. Griveau
Institute for Transuranium Elements (ITU)
5 shared publications- Eric Colineau
European Commission, Joint Research Centre, Institute for Transuranium Elements, Karlsruhe, Germany
4 shared publications E. Colineau
European Commission, Joint Research Centre, Institute for Transuranium Elements, Postfach 2340, D-76125 Karlsruhe, Germany
3 shared publications- Laura Martel
European Commission, Joint Research Centre, Institute for Transuranium Elements, P.O. Box 2340, D-76125 Karlsruhe, Germany
3 shared publications
Latest Publications
- Open Access
- 18 January 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (2) , 127
Synthesis and Characterization of Nanostructured Thorium Carbide for Radioactive Ion Beam Production
Thorium carbide () nano-structured thin disc-like pellets were produced from thoria nanoparticles (-NP) and multi-walled carbon nanotubes (MWCNT). These composites are to be studied as a target material candidate for radioactive ion beam (RIB) production via nuclear reactions upon impact with high-energy proton beams on a stack of solid pellets. The -NP precursor was produced via precipitation of thorium oxalate from a thorium nitrate solution with oxalic acid and subsequent hydrothermal oxidation of the oxalate, creating the thoria nanoparticles. The -NP were then mixed with MWCNT in isopropyl alcohol and sonicated by two different methods to create a nanoparticle dispersion. This dispersion was then heated under medium vacuum to evaporate the solvent; the resulting powder was pressed into pellets and taken to an inert-atmosphere oven, where it was heated to 1650 °C and carbothermally reduced to . The resulting pellets were characterized via XRD, SEM-EDS, and Raman spectroscopy. The resulting thorium pellets exhibited, at most, trace levels of the oxide precursor. Furthermore, the nanotube structures were still present in the final product and are expected to contribute positively towards faster radioisotope release times by lowering isotope diffusion times, which is required for the efficient extraction of the shortest-lived (<1 s half-life) radioisotopes.- 18 January 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (2) , 127
Open AccessSynthesis and Characterization of Nanostructured Thorium Carbide for Radioactive Ion Beam Production
Thorium carbide () nano-structured thin disc-like pellets were produced from thoria nanoparticles (-NP) and multi-walled carbon nanotubes (MWCNT). These composites are to be studied as a target material candidate for radioactive ion beam (RIB) production via nuclear reactions upon impact with high-energy proton beams on a stack of solid pellets. The -NP precursor was produced via precipitation of thorium oxalate from a thorium nitrate solution with oxalic acid and subsequent hydrothermal oxidation of the oxalate, creating the thoria nanoparticles. The -NP were then mixed with MWCNT in isopropyl alcohol and sonicated by two different methods to create a nanoparticle dispersion. This dispersion was then heated under medium vacuum to evaporate the solvent; the resulting powder was pressed into pellets and taken to an inert-atmosphere oven, where it was heated to 1650 °C and carbothermally reduced to . The resulting pellets were characterized via XRD, SEM-EDS, and Raman spectroscopy. The resulting thorium pellets exhibited, at most, trace levels of the oxide precursor. Furthermore, the nanotube structures were still present in the final product and are expected to contribute positively towards faster radioisotope release times by lowering isotope diffusion times, which is required for the efficient extraction of the shortest-lived (<1 s half-life) radioisotopes. - Open Access
Insight into the Crystal Structures and Physical Properties of the Uranium Borides UB1.78±0.02, UB3.61±0.041 and UB11.19±0.13
In this study we reported the synthesis of three polycrystalline uranium borides UB1.78±0.02, UB3.61±0.041, and UB11.19±0.13 and their analyses using chemical analysis, X-ray diffraction, SQUID magnetometry, solid-state NMR, and Fourier transformed infrared spectroscopy. We discuss the effects of stoichiometry deviations on the lattice parameters and magnetic properties. We also provide their static and MAS-NMR spectra showing the effects of the 5f-electrons on the 11B shifts. Finally, the FTIR measurements showed the presence of a local disorder.
Open AccessInsight into the Crystal Structures and Physical Properties of the Uranium Borides UB1.78±0.02, UB3.61±0.041 and UB11.19±0.13
In this study we reported the synthesis of three polycrystalline uranium borides UB1.78±0.02, UB3.61±0.041, and UB11.19±0.13 and their analyses using chemical analysis, X-ray diffraction, SQUID magnetometry, solid-state NMR, and Fourier transformed infrared spectroscopy. We discuss the effects of stoichiometry deviations on the lattice parameters and magnetic properties. We also provide their static and MAS-NMR spectra showing the effects of the 5f-electrons on the 11B shifts. Finally, the FTIR measurements showed the presence of a local disorder.
- Open Access
Thermodynamic Assessment of the NaF-KF-UF4 System
In the Molten Salt Reactor (MSR) concept, metal fluorides are key components of possible fuel and coolant salts. The fast reactor option opens the possibility for alternatives to the Li based matrix salts, avoiding the costly 7Li enrichment and the tritium production from residual 6Li. Such alternatives can be based on NaF and KF as matrix components. In this study, two pseudo-binary phase diagrams of NaF-UF4 and KF-UF4, and the NaF-KF-UF4 pseudo-ternary system were experimentally investigated using Differential Scanning Calorimetry (DSC). The obtained data were used to perform a full thermodynamic assessment of the NaF-KF-UF4 system. The calculated pseudo-ternary eutectic was found at 807 K and a 68.9-7.6-23.5 mol% NaF-KF-UF4 composition. The comprehensive experimental and modelling data obtained in this work provide further extension of the JRCMSD thermodynamic database describing thermodynamic properties of key fuel and coolant salts for the MSR technology.
Open AccessThermodynamic Assessment of the NaF-KF-UF4 System
In the Molten Salt Reactor (MSR) concept, metal fluorides are key components of possible fuel and coolant salts. The fast reactor option opens the possibility for alternatives to the Li based matrix salts, avoiding the costly 7Li enrichment and the tritium production from residual 6Li. Such alternatives can be based on NaF and KF as matrix components. In this study, two pseudo-binary phase diagrams of NaF-UF4 and KF-UF4, and the NaF-KF-UF4 pseudo-ternary system were experimentally investigated using Differential Scanning Calorimetry (DSC). The obtained data were used to perform a full thermodynamic assessment of the NaF-KF-UF4 system. The calculated pseudo-ternary eutectic was found at 807 K and a 68.9-7.6-23.5 mol% NaF-KF-UF4 composition. The comprehensive experimental and modelling data obtained in this work provide further extension of the JRCMSD thermodynamic database describing thermodynamic properties of key fuel and coolant salts for the MSR technology.
- Open Access
- 27 April 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-11
Effect of graphite and graphene oxide on thorium carbide microstructural and thermal properties
Thorium carbide to be tested as target material for the production of 225Ac with the ISOL method, was produced via carbothermal reduction of ThO2 nanoparticles by graphite and graphene oxide, respectively. The use of graphene oxide (GO) as carbon source resulted in a reduced reactivity compared to graphite, confirmed by the presence of unreacted ThO2 mainly in the core of the samples. The reacted ThO2 or ThC2–GO showed a faster reactivity in air, mainly observed as ThC2 amorphization. The specific surface area of the ThC2–GO samples was almost doubled compared to ThC2–graphite samples. The effect of these microstructural features was analysed in terms of thermal diffusivity and calculated thermal conductivity that were both reduced in ThC2–GO samples, however the difference with ThC2–graphite samples decreased at increasing temperature. The present study shows that the use of unreduced GO inhibits the solid-state reaction between ThO2 and C; on the other hand, the high reactivity of the ThC2 so produced is expected to be beneficial for the 225Ac production with the ISOL method, affording a high release efficiency. It is expected that the use of reduced GO could represent a good solution for highly efficient ThC2 targets.
- 27 April 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-11
Open AccessEffect of graphite and graphene oxide on thorium carbide microstructural and thermal properties
Thorium carbide to be tested as target material for the production of 225Ac with the ISOL method, was produced via carbothermal reduction of ThO2 nanoparticles by graphite and graphene oxide, respectively. The use of graphene oxide (GO) as carbon source resulted in a reduced reactivity compared to graphite, confirmed by the presence of unreacted ThO2 mainly in the core of the samples. The reacted ThO2 or ThC2–GO showed a faster reactivity in air, mainly observed as ThC2 amorphization. The specific surface area of the ThC2–GO samples was almost doubled compared to ThC2–graphite samples. The effect of these microstructural features was analysed in terms of thermal diffusivity and calculated thermal conductivity that were both reduced in ThC2–GO samples, however the difference with ThC2–graphite samples decreased at increasing temperature. The present study shows that the use of unreduced GO inhibits the solid-state reaction between ThO2 and C; on the other hand, the high reactivity of the ThC2 so produced is expected to be beneficial for the 225Ac production with the ISOL method, affording a high release efficiency. It is expected that the use of reduced GO could represent a good solution for highly efficient ThC2 targets.
- Open Access
- 21 February 2019
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 144,p. e59017
U2O5 Film Preparation via UO2 Deposition by Direct Current Sputtering and Successive Oxidation and Reduction with Atomic Oxygen and Atomic Hydrogen
We describe a method to produce U2O5 films in situ using the Labstation, a modular machine developed at JRC Karlsruhe. The Labstation, an essential part of the Properties of Actinides under Extreme Conditions laboratory (PAMEC), allows the preparation of films and studies of sample surfaces using surface analytical techniques such as X-ray and ultra-violet photoemission spectroscopy (XPS and UPS, respectively). All studies are made in situ, and the films, transferred under ultra-high vacuum from their preparation to an analyses chamber, are never in contact with the atmosphere. Initially, a film of UO2 is prepared by direct current (DC) sputter deposition on a gold (Au) foil then oxidized by atomic oxygen to produce a UO3 film. This latter is then reduced with atomic hydrogen to U2O5. Analyses are performed after each step involving oxidation and reduction, using high-resolution photoelectron spectroscopy to examine the oxidation state of uranium. Indeed, the oxidation and reduction times and corresponding temperature of the substrate during this process have severe effects on the resulting oxidation state of the uranium. Stopping the reduction of UO3 to U2O5 with single U(V) is quite challenging; first, uranium-oxygen systems exist in numerous intermediate phases. Second, differentiation of the oxidation states of uranium is mainly based on satellite peaks, whose intensity peaks are weak. Also, experimenters should be aware that X-ray spectroscopy (XPS) is a technique with an atomic sensitivity of 1% to 5%. Thus, it is important to obtain a complete picture of the uranium oxidation state with the entire spectra obtained on U4f, O1s, and the valence band (VB). Programs used in the Labstation include a linear transfer program developed by an outside company (see Table of Materials) as well as data acquisition and sputter source programs, both developed in-house.
- 21 February 2019
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 144,p. e59017
Open AccessU2O5 Film Preparation via UO2 Deposition by Direct Current Sputtering and Successive Oxidation and Reduction with Atomic Oxygen and Atomic Hydrogen
We describe a method to produce U2O5 films in situ using the Labstation, a modular machine developed at JRC Karlsruhe. The Labstation, an essential part of the Properties of Actinides under Extreme Conditions laboratory (PAMEC), allows the preparation of films and studies of sample surfaces using surface analytical techniques such as X-ray and ultra-violet photoemission spectroscopy (XPS and UPS, respectively). All studies are made in situ, and the films, transferred under ultra-high vacuum from their preparation to an analyses chamber, are never in contact with the atmosphere. Initially, a film of UO2 is prepared by direct current (DC) sputter deposition on a gold (Au) foil then oxidized by atomic oxygen to produce a UO3 film. This latter is then reduced with atomic hydrogen to U2O5. Analyses are performed after each step involving oxidation and reduction, using high-resolution photoelectron spectroscopy to examine the oxidation state of uranium. Indeed, the oxidation and reduction times and corresponding temperature of the substrate during this process have severe effects on the resulting oxidation state of the uranium. Stopping the reduction of UO3 to U2O5 with single U(V) is quite challenging; first, uranium-oxygen systems exist in numerous intermediate phases. Second, differentiation of the oxidation states of uranium is mainly based on satellite peaks, whose intensity peaks are weak. Also, experimenters should be aware that X-ray spectroscopy (XPS) is a technique with an atomic sensitivity of 1% to 5%. Thus, it is important to obtain a complete picture of the uranium oxidation state with the entire spectra obtained on U4f, O1s, and the valence band (VB). Programs used in the Labstation include a linear transfer program developed by an outside company (see Table of Materials) as well as data acquisition and sputter source programs, both developed in-house.
- Open Access
- 29 May 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 8272
Morphological and functional effects of graphene on the synthesis of uranium carbide for isotopes production targets
The development of tailored targets for the production of radioactive isotopes represents an active field in nuclear research. Radioactive beams find applications in nuclear medicine, in astrophysics, matter physics and materials science. In this work, we study the use of graphene both as carbon source for UO2 carbothermal reduction to produce UCx targets, and also as functional properties booster. At fixed composition, the UCx target grain size, porosity and thermal conductivity represent the three main points that affect the target production efficiency. UCx was synthesized using both graphite and graphene as the source of carbon and the target properties in terms of composition, grain size, porosity, thermal diffusivity and thermal conductivity were studied. The main output of this work is related to the remarkable enhancement achieved in thermal conductivity, which can profitably improve thermal dissipation during operational stages of UCx targets.
- 29 May 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 8272
Open AccessMorphological and functional effects of graphene on the synthesis of uranium carbide for isotopes production targets
The development of tailored targets for the production of radioactive isotopes represents an active field in nuclear research. Radioactive beams find applications in nuclear medicine, in astrophysics, matter physics and materials science. In this work, we study the use of graphene both as carbon source for UO2 carbothermal reduction to produce UCx targets, and also as functional properties booster. At fixed composition, the UCx target grain size, porosity and thermal conductivity represent the three main points that affect the target production efficiency. UCx was synthesized using both graphite and graphene as the source of carbon and the target properties in terms of composition, grain size, porosity, thermal diffusivity and thermal conductivity were studied. The main output of this work is related to the remarkable enhancement achieved in thermal conductivity, which can profitably improve thermal dissipation during operational stages of UCx targets.
- Open Access
- 29 May 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 8306
Direct observation of pure pentavalent uranium in U2O5 thin films by high resolution photoemission spectroscopy
Thin films of the elusive intermediate uranium oxide U2O5 have been prepared by exposing UO3 precursor multilayers to atomic hydrogen. Electron photoemission spectra measured about the uranium 4f core-level doublet contain sharp satellites separated by 7.9(1) eV from the 4f main lines, whilst satellites characteristics of the U(IV) and U(VI) oxidation states, expected respectively at 6.9(1) and 9.7(1) eV from the main 4f lines, are absent. This shows that uranium ions in the films are in a pure pentavalent oxidation state, in contrast to previous investigations of binary oxides claiming that U(V) occurs only as a metastable intermediate state coexisting with U(IV) and U(VI) species. The ratio between the 5f valence band and 4f core-level uranium photoemission intensities decreases by about 50% from UO2 to U2O5, which is consistent with the 5f 2 (UO2) and 5f 1 (U2O5) electronic configurations of the initial state. Our studies conclusively establish the stability of uranium pentoxide.
- 29 May 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 8306
Open AccessDirect observation of pure pentavalent uranium in U2O5 thin films by high resolution photoemission spectroscopy
Thin films of the elusive intermediate uranium oxide U2O5 have been prepared by exposing UO3 precursor multilayers to atomic hydrogen. Electron photoemission spectra measured about the uranium 4f core-level doublet contain sharp satellites separated by 7.9(1) eV from the 4f main lines, whilst satellites characteristics of the U(IV) and U(VI) oxidation states, expected respectively at 6.9(1) and 9.7(1) eV from the main 4f lines, are absent. This shows that uranium ions in the films are in a pure pentavalent oxidation state, in contrast to previous investigations of binary oxides claiming that U(V) occurs only as a metastable intermediate state coexisting with U(IV) and U(VI) species. The ratio between the 5f valence band and 4f core-level uranium photoemission intensities decreases by about 50% from UO2 to U2O5, which is consistent with the 5f 2 (UO2) and 5f 1 (U2O5) electronic configurations of the initial state. Our studies conclusively establish the stability of uranium pentoxide.
- Open Access
- 1 January 2017
- Published by Jagiellonian University in Acta Physica Polonica B
- Vol. 48 (3)
Production and Study of Neutron-rich Nuclei Using the LICORNE Directional Neutron Source
We have recently successfully demonstrated a new technique for production and study of many of the most exotic neutron-rich nuclei at moderate spins. LICORNE, a newly developed directional inverse-kinematic fast neutron source at the IPN Orsay, was coupled to the Miniball high resolution gamma-ray spectrometer to study nuclei the furthest from stability using the 238U(n,f) reaction. This reaction and 232Th(n,f), are the most neutron-rich fission production mechanisms achievable and can be used to simultaneously populate hundreds of neutron-rich nuclei up to spins of ~ 16 hbar. High selectivity in the experiment was achieved via triple gamma-ray coincidences and the use of a 400 ns period pulsed neutron beam, a technique which is unavailable to other population mechanisms such as 235U(nth,f) and 252Cf(SF). The pulsing allows time correlations to be exploited to separate delayed gamma-rays from isomeric states in the hundreds of nuclei produced, which are then used to cleanly select a particular nucleus and its exotic binary partners. In the recent experiment several physics cases are simultaneously addressed such as shape coexistence, the evolution of shell closures far from stability, and the spectroscopy of nuclei in the r-process path near N=82. Preliminary physics results will soon be published on anomalies in the 238U(n,f) fission yields and the structure of the 138Te and 100Sr nuclei. A future project, nu-ball, to couple LICORNE with a hybrid escape suppressed spectrometer to refine further the technique and achieve a large increase in the observational limit is discussed.JRC.G.2-Standards for Nuclear Safety, Security and Safeguard
- 1 January 2017
- Published by Jagiellonian University in Acta Physica Polonica B
- Vol. 48 (3)
Open AccessProduction and Study of Neutron-rich Nuclei Using the LICORNE Directional Neutron Source
We have recently successfully demonstrated a new technique for production and study of many of the most exotic neutron-rich nuclei at moderate spins. LICORNE, a newly developed directional inverse-kinematic fast neutron source at the IPN Orsay, was coupled to the Miniball high resolution gamma-ray spectrometer to study nuclei the furthest from stability using the 238U(n,f) reaction. This reaction and 232Th(n,f), are the most neutron-rich fission production mechanisms achievable and can be used to simultaneously populate hundreds of neutron-rich nuclei up to spins of ~ 16 hbar. High selectivity in the experiment was achieved via triple gamma-ray coincidences and the use of a 400 ns period pulsed neutron beam, a technique which is unavailable to other population mechanisms such as 235U(nth,f) and 252Cf(SF). The pulsing allows time correlations to be exploited to separate delayed gamma-rays from isomeric states in the hundreds of nuclei produced, which are then used to cleanly select a particular nucleus and its exotic binary partners. In the recent experiment several physics cases are simultaneously addressed such as shape coexistence, the evolution of shell closures far from stability, and the spectroscopy of nuclei in the r-process path near N=82. Preliminary physics results will soon be published on anomalies in the 238U(n,f) fission yields and the structure of the 138Te and 100Sr nuclei. A future project, nu-ball, to couple LICORNE with a hybrid escape suppressed spectrometer to refine further the technique and achieve a large increase in the observational limit is discussed.JRC.G.2-Standards for Nuclear Safety, Security and Safeguard
- 7 March 2016
- Published by Springer Nature in Hyperfine Interactions
- Vol. 237 (1) , 80
Magnetic sublattices in Np2Co17 and Np2Ni17
- 7 March 2016
- Published by Springer Nature in Hyperfine Interactions
- Vol. 237 (1) , 80
Magnetic sublattices in Np2Co17 and Np2Ni17
- Open Access
- 9 September 2014
- Published by Springer Nature in Journal of Materials Science
- Vol. 49 (24) , 8436-8443
Investigation of ammonium diuranate calcination with high-temperature X-ray diffraction
- 9 September 2014
- Published by Springer Nature in Journal of Materials Science
- Vol. 49 (24) , 8436-8443
Open AccessInvestigation of ammonium diuranate calcination with high-temperature X-ray diffraction