Takashi Kurita
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Takashi Kurita has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
Toshiyuki Kawashima
Central Research Laboratory
7 shared publications- Noriaki Miyanaga
Osaka Univ. (Japan)
6 shared publications - Takashi Sekine
Hamamatsu Photonics K. K., 5000 Hirakuchi, Hamakita, Shizuoka, Japan
5 shared publications - Junji Kawanaka
Institute of Laser Engineering, Osaka University
4 shared publications Keiichi Sueda
Photon Pioneers Center, Osaka University, Suita, Osaka 565-0871, Japan
3 shared publicationsOsamu Matsumoto
Hamamatsu Photonics K. K., 5000 Hirakuchi, Hamakita, Shizuoka, Japan
3 shared publications
Latest Publications
- 3 March 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (9) , 095109
Temporal evolution of pressure profiles for laser-induced cavitation bubble on the metal surface
When a laser is focused on an underwater object, it experiences a large amount of pressure owing to the plasma confinement effect of water. A hemispherical bubble is generated on the surface of the object, and large pressure is generated when the bubble collapses. In this study, we conducted experiments using different laser energies to analyze the pressure–time histories associated with bubble contraction. The maximum pressure was 10%–40% of the laser ablation pressure, whereas the pressure pulse width was 5–10 times longer than the laser pulse width. Furthermore, the bubble motion could be adiabatically explained, except for the plasma interaction region. The results indicate that the pressure at which the bubble collapses does not depend on the maximum size of the generated bubble but depends on the energy of water vapor within the bubble.
- 3 March 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (9) , 095109
Temporal evolution of pressure profiles for laser-induced cavitation bubble on the metal surface
When a laser is focused on an underwater object, it experiences a large amount of pressure owing to the plasma confinement effect of water. A hemispherical bubble is generated on the surface of the object, and large pressure is generated when the bubble collapses. In this study, we conducted experiments using different laser energies to analyze the pressure–time histories associated with bubble contraction. The maximum pressure was 10%–40% of the laser ablation pressure, whereas the pressure pulse width was 5–10 times longer than the laser pulse width. Furthermore, the bubble motion could be adiabatically explained, except for the plasma interaction region. The results indicate that the pressure at which the bubble collapses does not depend on the maximum size of the generated bubble but depends on the energy of water vapor within the bubble.
- 22 November 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (25) , 44385-44394
253 J at 0.2 Hz, LD pumped cryogenic helium gas cooled Yb:YAG ceramics laser
A 253 J with 26 ns at 0.2 Hz laser performance was demonstrated using a LD pumped cryogenically cooled Yb:YAG ceramics laser amplifier. A high energy storage of 344 J was achieved with a stored energy density of 0.58 J/cm3 using a 1 kJ output multidirectional-pumping system. High energy-extraction efficiency of 56.5% was achieved with high energy fluence of 4.63 J /cm2. To the best of our knowledge, this is the highest output energy obtained with a repetitive nanosecond pulse by LD pumped solid-state laser. This paper presented a design of 1 kJ amplifier based on experimentally proven numerical data.
- 22 November 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (25) , 44385-44394
253 J at 0.2 Hz, LD pumped cryogenic helium gas cooled Yb:YAG ceramics laser
A 253 J with 26 ns at 0.2 Hz laser performance was demonstrated using a LD pumped cryogenically cooled Yb:YAG ceramics laser amplifier. A high energy storage of 344 J was achieved with a stored energy density of 0.58 J/cm3 using a 1 kJ output multidirectional-pumping system. High energy-extraction efficiency of 56.5% was achieved with high energy fluence of 4.63 J /cm2. To the best of our knowledge, this is the highest output energy obtained with a repetitive nanosecond pulse by LD pumped solid-state laser. This paper presented a design of 1 kJ amplifier based on experimentally proven numerical data.
- 15 June 2020
- Published by Optica Publishing Group in OSA Continuum
- Vol. 3 (6) , 1711-1720
Simultaneous material processing by picosecond-pulse bursts and nanosecond pulses arbitrarily generated by a directly modulated laser diode system
We report a directly modulated laser diode system capable of generating picosecond-pulse bursts and nanosecond pulses simultaneously. A generated pulse shape can be arbitrary controlled with a temporal resolution of 1 ns and wavelength of 1064 nm. A two-stage Nd:YVO4 amplifier boosts the pulse energy to hundreds of microjoules to process JIS 304 stainless steel. Characterization of processed holes irradiated by different pulse durations and shapes reveals that the ablation efficiencies with the nanosecond pulses are two times higher than those with the picosecond-pulse bursts. A clear hole with a taper angle of 1.5° is realized by the picosecond-pulse bursts with a 10-ns pulse interval. The combination of pulses with large differences in timescales offers an efficient production line with a single laser system.
- 15 June 2020
- Published by Optica Publishing Group in OSA Continuum
- Vol. 3 (6) , 1711-1720
Simultaneous material processing by picosecond-pulse bursts and nanosecond pulses arbitrarily generated by a directly modulated laser diode system
We report a directly modulated laser diode system capable of generating picosecond-pulse bursts and nanosecond pulses simultaneously. A generated pulse shape can be arbitrary controlled with a temporal resolution of 1 ns and wavelength of 1064 nm. A two-stage Nd:YVO4 amplifier boosts the pulse energy to hundreds of microjoules to process JIS 304 stainless steel. Characterization of processed holes irradiated by different pulse durations and shapes reveals that the ablation efficiencies with the nanosecond pulses are two times higher than those with the picosecond-pulse bursts. A clear hole with a taper angle of 1.5° is realized by the picosecond-pulse bursts with a 10-ns pulse interval. The combination of pulses with large differences in timescales offers an efficient production line with a single laser system.
- Open Access
- 1 December 2013
- Published by IOP Publishing in Applied Physics Express
- Vol. 6 (12) , 122703
High-Gain Regenerative Chirped-Pulse Amplifier Using Photonic Crystal Rod Fiber
We have demonstrated a high-gain regenerative chirped-pulse amplifier (CPA) using an Yb-doped photonic crystal rod fiber of 100 ?m core diameter. The input pulse energy is 150 nJ in a pulse width of 2.5 ns at a repetition rate of 1 kHz with a central wavelength of 1053 nm. At a pump power of 13.2 W, the amplified pulse energy is 0.26 mJ, yielding a gain of 1700.
- 1 December 2013
- Published by IOP Publishing in Applied Physics Express
- Vol. 6 (12) , 122703
Open AccessHigh-Gain Regenerative Chirped-Pulse Amplifier Using Photonic Crystal Rod Fiber
We have demonstrated a high-gain regenerative chirped-pulse amplifier (CPA) using an Yb-doped photonic crystal rod fiber of 100 ?m core diameter. The input pulse energy is 150 nJ in a pulse width of 2.5 ns at a repetition rate of 1 kHz with a central wavelength of 1053 nm. At a pump power of 13.2 W, the amplified pulse energy is 0.26 mJ, yielding a gain of 1700.
- 4 June 2013
- Published by IOP Publishing in Nuclear Fusion
- Vol. 53 (7) , 073011
1 Hz fast-heating fusion driver HAMA pumped by a 10 J green diode-pumped solid-state laser
- 4 June 2013
- Published by IOP Publishing in Nuclear Fusion
- Vol. 53 (7) , 073011
1 Hz fast-heating fusion driver HAMA pumped by a 10 J green diode-pumped solid-state laser
- 23 November 2011
- Published by Optica Publishing Group in Optics Express
- Vol. 19 (25) , 25199-25205
Dispersion compensation in an Yb-doped fiber oscillator for generating transform-limited, wing-free pulses
We investigate the effect of dispersion compensation on temporal characteristics in mode-locking by nonlinear polarization rotation in an ytterbium-doped fiber (YDF) oscillator with intracavity and external grating pairs. A short fixed length YDF was spliced with a longer single-mode fiber (SMF). Using experimentally measured dispersion characteristics of the YDF, SMF and cavity optics, we control the group velocity dispersion (GVD) and spectral broadening in a cavity by changing the SMF length. As a result, the oscillator generated 29.4-fs transform-limited wing-free pulses, which are to our knowledge the shortest and cleanest pulses achieved without the use of additional optics like a prism pair for high-order dispersion compensation. The results show that a precise balance of higher order terms of the GVD and self-phase modulation is essential for shortening pulse duration.
- 23 November 2011
- Published by Optica Publishing Group in Optics Express
- Vol. 19 (25) , 25199-25205
Dispersion compensation in an Yb-doped fiber oscillator for generating transform-limited, wing-free pulses
We investigate the effect of dispersion compensation on temporal characteristics in mode-locking by nonlinear polarization rotation in an ytterbium-doped fiber (YDF) oscillator with intracavity and external grating pairs. A short fixed length YDF was spliced with a longer single-mode fiber (SMF). Using experimentally measured dispersion characteristics of the YDF, SMF and cavity optics, we control the group velocity dispersion (GVD) and spectral broadening in a cavity by changing the SMF length. As a result, the oscillator generated 29.4-fs transform-limited wing-free pulses, which are to our knowledge the shortest and cleanest pulses achieved without the use of additional optics like a prism pair for high-order dispersion compensation. The results show that a precise balance of higher order terms of the GVD and self-phase modulation is essential for shortening pulse duration.
- 23 June 2010
- Published by Optica Publishing Group in Optics Express
- Vol. 18 (14) , 14541-14546
Experimental demonstration of spatially coherent beam combining using optical parametric amplification
We experimentally demonstrated coherent beam combining using optical parametric amplification with a nonlinear crystal pumped by random-phased multiple-beam array of the second harmonic of a Nd:YAG laser at 10-Hz repetition rate. In the proof-of-principle experiment, the phase jump between two pump beams was precisely controlled by a motorized actuator. For the demonstration of multiple-beam combining a random phase plate was used to create random-phased beamlets as a pump pulse. Far-field patterns of the pump, the signal, and the idler indicated that the spatially coherent signal beams were obtained on both cases. This approach allows scaling of the intensity of optical parametric chirped pulse amplification up to the exa-watt level while maintaining diffraction-limited beam quality.
- 23 June 2010
- Published by Optica Publishing Group in Optics Express
- Vol. 18 (14) , 14541-14546
Experimental demonstration of spatially coherent beam combining using optical parametric amplification
We experimentally demonstrated coherent beam combining using optical parametric amplification with a nonlinear crystal pumped by random-phased multiple-beam array of the second harmonic of a Nd:YAG laser at 10-Hz repetition rate. In the proof-of-principle experiment, the phase jump between two pump beams was precisely controlled by a motorized actuator. For the demonstration of multiple-beam combining a random phase plate was used to create random-phased beamlets as a pump pulse. Far-field patterns of the pump, the signal, and the idler indicated that the spatially coherent signal beams were obtained on both cases. This approach allows scaling of the intensity of optical parametric chirped pulse amplification up to the exa-watt level while maintaining diffraction-limited beam quality.
- 1 June 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Chirped pulse amplification laser using Nd:glass zig-zag slab pumped by laser diodes
We have developed a chirped pulse amplification laser using Ndrglass zig-zag slab pumped by laser diodes as a higher-power pump source for intense few-cycle laser.
- 1 June 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Chirped pulse amplification laser using Nd:glass zig-zag slab pumped by laser diodes
We have developed a chirped pulse amplification laser using Ndrglass zig-zag slab pumped by laser diodes as a higher-power pump source for intense few-cycle laser.
- 1 January 2009
- Published by Optica Publishing Group
- Vol. 27, MB6
Chirped pulse amplification system using Nd-doped zig-zag glass slab pumped by laser diodes
We have developed a chirped pulse amplification system using Nd-doped zig-zag glass slab pumped by laser diodes as a pump source for the OPA. The output energy of 1 J with 4.1nm bandwidth was obtained.
- 1 January 2009
- Published by Optica Publishing Group
- Vol. 27, MB6
Chirped pulse amplification system using Nd-doped zig-zag glass slab pumped by laser diodes
We have developed a chirped pulse amplification system using Nd-doped zig-zag glass slab pumped by laser diodes as a pump source for the OPA. The output energy of 1 J with 4.1nm bandwidth was obtained.
- 1 January 2008
- Published by Optica Publishing Group
- p. PDPA6
1.04-J CPA Output from Diode-Pumped Nd:glass Zig-Zag Slab Laser for 30 TW Few-Cycle NOPA Laser System
A diode-pumped Nd:glass chirped pulse amplification system has been designed for pumping OPCPA. 1.04-J pulse energy in 4.1-nm spectral width at 1Hz has been obtained. The potential over 2-TW output is addressed.
- 1 January 2008
- Published by Optica Publishing Group
- p. PDPA6
1.04-J CPA Output from Diode-Pumped Nd:glass Zig-Zag Slab Laser for 30 TW Few-Cycle NOPA Laser System
A diode-pumped Nd:glass chirped pulse amplification system has been designed for pumping OPCPA. 1.04-J pulse energy in 4.1-nm spectral width at 1Hz has been obtained. The potential over 2-TW output is addressed.