Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Liping Guo has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance Evaluation of Artificial Neural Network, Perturb and Observe, and Incremental Conductance MPPT Controllers for Wind Energy Conversion Systems

    by Ravi Teja Medikonda, Liping Guo

    Reliable maximum power point tracking (MPPT) methods are essential in dynamic wind conditions to obtain maximum efficiency in wind energy conversion systems (WECSs). Conventional methods like incremental conductance (INC) and perturb and observe (P&O) are simple and robust but have drawbacks in terms of convergence and oscillations around the maximum power point (MPP) under dynamic conditions. In contrast, intelligent control methods such as artificial neural networks (ANNs) adapt more effectively. This paper presents a comparative analysis of ANN, P&O, and INC methods to obtain MPP for a WECS. A permanent magnet synchronous generator (PMSG) was coupled with a DC–DC boost converter to study the performance of the three MPPT methods under two different wind profiles. The ANN was trained with Bayesian regularization (BR) to estimate wind speed using rotor speed and computed mechanical power as inputs. The INC method achieved MPP using real-time power–voltage curves, while the P&O method perturbs the control variable, observes its results in output power, and adjusts the control variable accordingly. The three MPPT methods were compared in terms of power extraction, voltage stability, robustness, and dynamic response. The ANN achieved faster response, smoother output power and voltage, and reduced oscillation to dynamic conditions with higher output power compared to P&O and INC. On the other hand, the P&O and INC methods are less computationally intensive and do not require offline training.


  • Teaching Practice and Reform of Power System Modeling and Simulation Course

    by Gu Xiufang, Guo Liping, Han Ruyue, Xu Tao, Li Jingyu, Zhang Na

    三仓出版社主要从事中文国际开源期刊的出版与发行,期刊领域涵盖工程技术、数学与物理、人文社会、信息科学、经济与管理、医药卫生、农业、地球环境等学科,借助互联网思维及现代信息技术,立足国内高校及研究机构的科研需求,力图推动中国学术界知识的交流与传播,可期刊发表、发表论文、快速发表,见刊快。三仓出版社欢迎广大科研学者加入我们,参与审稿,合作办刊,投稿荐稿,与中文期刊一同成长壮大。如果您对期刊有任何的意见或者建议,请联系service@sciscanpub.com.

  • Open Access

    Engaging Renewable Energy Education Using a Web-Based Interactive Microgrid Virtual Laboratory

    by Liping Guo, Nauman Moiz Mohammed Abdul, Madhav Vengalil, Kezhou Wang, Alecia Santuzzi

    Microgrids are the main building blocks of future smart grids. They provide a promising solution for integrating renewable energy sources and distributed power generation into the power grids. The high penetration of renewable energy sources and their intermittent nature have brought about significant challenges to the control and operation of microgrids. In recent years, an enormous amount of research has been conducted on microgrid dynamics, stability analysis, power management, and control. However, there has been limited effort to integrate cutting-edge technologies into classrooms and laboratories. Many academic institutions face special challenges in establishing microgrid laboratories because of the rapid development of technology, cost, and space requirements, as well as daily and seasonal variations in renewable energy sources. Virtual and remote laboratories have become widely accepted for conducting experiments in higher education. A virtual laboratory is particularly suitable for renewable energy-based microgrids to overcome cost, space, and time restrictions. In this study, a web-based virtual laboratory for microgrids with renewable energy sources was designed and used for renewable energy education. The virtual laboratory was developed using NI® LabVIEW, Microsoft®.Net Core, and MATLAB/Simulink®. Innovative courseware was developed around the virtual laboratory and used in several engineering technology courses to teach topics including solar and wind power, data acquisition, DC-DC converters, battery management, and microgrids. The evaluation showed that the virtual laboratory greatly increased students’ awareness, interest, and knowledge of renewable energy. It provides an interactive and convenient tool to engage students to experiment with renewable energy and microgrids.


  • Open Access

    Editorial: Power Management for AC/DC Hybrid Microgrid

    by Liping Guo, Xingang Fu, Jianwu Zeng

    Editorial: Power Management for AC/DC Hybrid Microgrid


  • Design and implementation of virtual laboratory for a microgrid with renewable energy sources

    by Liping Guo, Madhav Vengalil, Nauman Moiz Mohammed Abdul, Kezhou Wang

    Growing demand for energy consumption worldwide has led to an increase in carbon emissions, which have significant effects on climate change. There is an urgent need for clean and renewable energy sources. However, most renewable energy sources, such as solar and wind, have very high initial costs, especially when used as a principal source. Distributed power generation using solar and wind power provides an effective solution to reduce the dependency on conventional power generation and to increase the reliability and quality of power systems. A mixture of distributed energy generation systems and loads can then be connected to form a microgrid. Virtual and remote laboratories are becoming widely accepted to conduct experiments in higher education. A virtual laboratory is especially suitable for the renewable energy‐based microgrid to overcome cost, space, and time restrictions. In this paper, the design and implementation of a web‐based virtual laboratory for a microgrid with renewable energy sources is presented. The virtual laboratory was developed using LabVIEW, Microsoft.Net Core, and Matlab/Simulink. Innovative courseware was developed around the virtual laboratory and used in several engineering technology courses to teach topics, including solar and wind power, dc‐dc converters, battery management, and microgrid. The assessment shows that the virtual laboratory greatly increased students awareness, interest, and knowledge in renewable energy. It provided an interactive and convenient tool for students to experiment with renewable energy and microgrid.


  • Open Access

    Design and Evaluation of Fuzzy Adaptive Particle Swarm Optimization Based Maximum Power Point Tracking on Photovoltaic System Under Partial Shading Conditions

    by Liping Guo, Nauman Moiz Mohammed Abdul

    Artificial intelligence methods such as fuzzy logic and particle swarm optimization (PSO) have been applied to maximum power point tracking (MPPT) for solar panels. The P-V curve of a solar panel exhibits multiple peaks under partial shading condition (PSC) when all modules of a solar panel do not receive the same solar irradiation. Although conventional PSO has been shown to perform well under uniform insolation, it is often unable to find the global maximum power point under PSC. Fuzzy adaptive PSO controllers have been proposed for MPPT. However, the controller became computation-intensive in order to adjust the PSO parameters for each particle. In this paper, fuzzy adaptive PSO-based and conventional PSO-based MPPT are compared and evaluated in the aspect of design and performance. A simple fuzzy adaptive PSO controller for MPPT was designed to reach the global optimal point under PSC and uniform irradiation. The controller combines the advantages of both PSO and fuzzy control. The fuzzy controller dynamically adjusts the PSO parameter to improve the convergence speed and global search capability. Since tuning of the PSO parameter is designed to be common for all particles, it reduced the computation complexity. The fuzzy controller’s rule base is designed to obtain a fast transient response and stable steady state response. Design of the fuzzy adaptive PSO-based MPPT is verified with simulation results using a boost converter. The results are evaluated in comparison to the results using a conventional PSO controller under PSC. Simulation shows the fuzzy adaptive PSO-based MPPT is able to improve the global search process and increase the convergency speed. The comparison indicates the settling time using the fuzzy adaptive PSO-based MPPT is 14% faster under PSC on average and 30% faster under uniform irradiation than the settling time using the conventional PSO. Both the fuzzy adaptive and conventional PSO controllers have similar output power tracking accuracy.


  • Open Access

    Design of a Laboratory Scale Solar Microgrid Cyber-Physical System for Education

    by Liping Guo, Jason Kors

    Renewable energy sources such as solar and wind provide an effective solution for reducing dependency on conventional power generation and increasing the reliability and quality of power systems. Presented in this paper are design and implementation of a laboratory scale solar microgrid cyber-physical system (CPS) with wireless data monitoring as a teaching tool in the engineering technology curriculum. In the system, the solar panel, battery, charge controller, and loads form the physical layer, while the sensors, communication networks, supervisory control and data acquisition systems (SCADA) and control systems form the cyber layer. The physical layer was seamlessly integrated with the cyber layer consisting of control and communication. The objective was to create a robust CPS platform and to use the system to promote interest in and knowledge of renewable energy among university students. Experimental results showed that the maximum power point tracking (MPPT) charge controller provided the loads with power from the solar panel and used additional power to charge the rechargeable battery. Through the system, students learned and mastered key concepts and knowledge of multi-disciplinary areas including data sampling and acquisition, analog to digital conversion, solar power, battery charging, control, embedded systems and software programing. It is a valuable teaching resource for students to study renewable energy in CPS.


  • Design and Evaluation of a Digital Control System: An Upgrade from Converters to Resolve Aging and Obsolescence Issues

    by Liping Guo, Muhammad Aqil, Donald S. Zinger, Ju Wang

    The dc-dc converters at the Advanced Photon Source (APS) at the Argonne National Laboratory, Illinois, are more than 15 years old. An upgrade to a digital control system is being evaluated to resolve aging and obsolescence issues. These converters supply power to electromagnets used to guide high-energy beams, so a highly accurate control system is required for the dc-dc converters. This article describes the design and evaluation of a digital control system to regulate the output current and resolve aging and obsolescence issues.

  • Using microgrids to enhance energy security and resilience

    by Xiaonan Lu, Jianhui Wang, Liping Guo


  • Top Cited Papers

    PWM-Based Adaptive Sliding-Mode Control for Boost DC–DC Converters

    by Said Oucheriah, Liping Guo

    In this paper, a robust adaptive sliding-mode controller is designed for a boost converter with an unknown resistive load and external input voltage. Adaptation laws are designed using state observers. The closed-loop system for the boost converter is shown to be asymptotically stable. Finally, the robustness of the adaptive controller to input voltage and load uncertainties and variations is tested experimentally.