Andrew T. Harris
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Andrew T. Harris has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Chee Howe See
Laboratory for Sustainable Technology, School of Chemical and Biomolecular Engineering, University of Sydney, NSW 2006, Australia
3 shared publicationsJun Liu
Laboratory for Sustainable Technology, School of Chemical and Biomolecular Engineering, Building J01, University of Sydney, NSW 2006, Australia
3 shared publicationsRoza Bali
The University of Sydney
2 shared publicationsTamara L. Church
Laboratory for Sustainable Technology, School of Chemical and Biomolecular Engineering, University of Sydney, New South Wales 2006, Australia
2 shared publicationsAnja Coenen
Laboratory for Sustainable Technology, School of Chemical and Biomolecular Engineering, University of Sydney, Sydney, New South Wales 2006, Australia
1 shared publicationErrin Johnson
Australian Centre for Microscopy and Microanalysis, University of Sydney, New South Wales 2006, Australia
1 shared publication
Latest Publications
- 12 September 2012
- Published by The Royal Society in Journal of The Royal Society Interface
- Vol. 9 (77) , 3514-3527
Multiwalled carbon nanotubes in alfalfa and wheat: toxicology and uptake
Data on the bioavailability and toxicity of carbon nanotubes (CNTs) in the environment, and, in particular, on their interactions with vascular plants, are limited. We investigated the effects of industrial-grade multiwalled CNTs (75 wt% CNTs) and their impurities on alfalfa and wheat. Phytotoxicity assays were performed during both seed germination and seedling growth. The germinations of both species were tolerant of up to 2560 mg l −1 CNTs, and root elongation was enhanced in alfalfa and wheat seedlings exposed to CNTs. Remarkably, catalyst impurities also enhanced root elongation in alfalfa seedlings as well as wheat germination. Thus the impurities, not solely the CNTs, impacted the plants. CNT internalization by plants was investigated using electron microscopy and two-dimensional Raman mapping. The latter showed that CNTs were adsorbed onto the root surfaces of alfalfa and wheat without significant uptake or translocation. Electron microscopy investigations of internalization were inconclusive owing to poor contrast, so Fe 3 O 4 -functionalized CNTs were prepared and studied using energy-filter mapping of Fe 3 O 4 . CNTs bearing Fe 3 O 4 nanoparticles were detected in the epidermis of one wheat root tip only, suggesting that internalization was possible but unusual. Thus, alfalfa and wheat tolerated high concentrations of industrial-grade multiwalled CNTs, which adsorbed onto their roots but were rarely taken up.
- 12 September 2012
- Published by The Royal Society in Journal of The Royal Society Interface
- Vol. 9 (77) , 3514-3527
Multiwalled carbon nanotubes in alfalfa and wheat: toxicology and uptake
Data on the bioavailability and toxicity of carbon nanotubes (CNTs) in the environment, and, in particular, on their interactions with vascular plants, are limited. We investigated the effects of industrial-grade multiwalled CNTs (75 wt% CNTs) and their impurities on alfalfa and wheat. Phytotoxicity assays were performed during both seed germination and seedling growth. The germinations of both species were tolerant of up to 2560 mg l −1 CNTs, and root elongation was enhanced in alfalfa and wheat seedlings exposed to CNTs. Remarkably, catalyst impurities also enhanced root elongation in alfalfa seedlings as well as wheat germination. Thus the impurities, not solely the CNTs, impacted the plants. CNT internalization by plants was investigated using electron microscopy and two-dimensional Raman mapping. The latter showed that CNTs were adsorbed onto the root surfaces of alfalfa and wheat without significant uptake or translocation. Electron microscopy investigations of internalization were inconclusive owing to poor contrast, so Fe 3 O 4 -functionalized CNTs were prepared and studied using energy-filter mapping of Fe 3 O 4 . CNTs bearing Fe 3 O 4 nanoparticles were detected in the epidermis of one wheat root tip only, suggesting that internalization was possible but unusual. Thus, alfalfa and wheat tolerated high concentrations of industrial-grade multiwalled CNTs, which adsorbed onto their roots but were rarely taken up.
- 13 December 2011
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 26 (1) , 162-168
Biological versus Synthetic Polymers as Templates for Calcium Oxide for CO2 Capture
- 13 December 2011
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 26 (1) , 162-168
Biological versus Synthetic Polymers as Templates for Calcium Oxide for CO2 Capture
- 31 July 2011
- Published by Elsevier in Materials Letters
- Vol. 65 (14) , 2307-2310
Facile size and shape control of templated Au nanoparticles under microwave irradiation
- 31 July 2011
- Published by Elsevier in Materials Letters
- Vol. 65 (14) , 2307-2310
Facile size and shape control of templated Au nanoparticles under microwave irradiation
- 15 June 2010
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 45 (10) , 1395-1401
Biogenic Separation, Accumulation and Cellular Distribution of Cu, Co, and Ni inMedicago sativaunder Idealized Conditions
The limits of uptake of Co, Ni, and Cu by the common metallophyte, Medicago sativa, were assessed using hydroponic growth and metal uptake experiments. The influence of the growth substrate metal concentration (500 and 1000 ppm) and exposure time, i.e., the time plants were exposed to the metal solution (24, 48, or 72 h) was investigated. The combined roots and shoots of Medicago sativa accumulated up to 2.2 wt-% Co, 2.0 wt-% Ni, and 3.5 wt-% Cu, when exposed to aqueous solutions containing 1000 ppm Co for 48 h, 1000 ppm Ni for 72 h, and 1000 ppm Cu for 72 h, respectively. The distribution of the sequestered metals was assessed using proton induced that X-ray emission spectroscopy (μ-PIXE), which indicated that translocation mechanism was most likely xylem loading. However, the rate of translocation of the metal from the roots to the plant stem was different for each metal, suggesting differing mechanisms for each. Collectively, these results suggest the separation and removal of the heavy metals Cu, Co, and Ni from contaminated substrates using Medicago sativa is a viable technology.
- 15 June 2010
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 45 (10) , 1395-1401
Biogenic Separation, Accumulation and Cellular Distribution of Cu, Co, and Ni inMedicago sativaunder Idealized Conditions
The limits of uptake of Co, Ni, and Cu by the common metallophyte, Medicago sativa, were assessed using hydroponic growth and metal uptake experiments. The influence of the growth substrate metal concentration (500 and 1000 ppm) and exposure time, i.e., the time plants were exposed to the metal solution (24, 48, or 72 h) was investigated. The combined roots and shoots of Medicago sativa accumulated up to 2.2 wt-% Co, 2.0 wt-% Ni, and 3.5 wt-% Cu, when exposed to aqueous solutions containing 1000 ppm Co for 48 h, 1000 ppm Ni for 72 h, and 1000 ppm Cu for 72 h, respectively. The distribution of the sequestered metals was assessed using proton induced that X-ray emission spectroscopy (μ-PIXE), which indicated that translocation mechanism was most likely xylem loading. However, the rate of translocation of the metal from the roots to the plant stem was different for each metal, suggesting differing mechanisms for each. Collectively, these results suggest the separation and removal of the heavy metals Cu, Co, and Ni from contaminated substrates using Medicago sativa is a viable technology.
- 28 March 2010
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 12 (8) , 3087-3095
Biogenic Pt uptake and nanoparticle formation in Medicago sativa and Brassica juncea
- 28 March 2010
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 12 (8) , 3087-3095
Biogenic Pt uptake and nanoparticle formation in Medicago sativa and Brassica juncea
- 9 October 2009
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 48 (24) , 10765-10770
Synthesis and Characterization of CaO Nanopods for High Temperature CO2 Capture
- 9 October 2009
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 48 (24) , 10765-10770
Synthesis and Characterization of CaO Nanopods for High Temperature CO2 Capture
- 14 September 2009
- Published by Wiley in AIChE Journal
- Vol. 56 (1) , 102-113
Synthesis of multiwalled carbon nanotubes on Al2O3 supported Ni catalysts in a fluidized‐bed
Multiwalled carbon nanotubes (MWNTs) were synthesized on Al2O3 supported Ni catalysts from C2H2 and C2H4 feedstocks in a fluidized bed. The influence of the ratio of superficial gas velocity to the minimum fluidization velocity (U/Umf), feedstock type, the ratio of carbon in the total quantity of gas fed to the reactor, reaction temperature, the ratio of hydrogen to carbon in the feed gas, and nickel loading were all investigated. Significantly, the pressure drop across the fluidized‐bed increased as the reaction time increased for all experiments, due to the deposition of MWNTs on the catalyst particles. This resulted in substantial changes to the depth and structure of the fluidized bed as the reaction proceeded, significantly altering the bed hydrodynamics. TEM images of the bed materials showed that MWNTs, metal catalysts, and alumina supports were predominant in the product mixture, with some coiled carbon nanotubes as a by‐product. © 2009 American Institute of Chemical Engineers AIChE J, 2009
- 14 September 2009
- Published by Wiley in AIChE Journal
- Vol. 56 (1) , 102-113
Synthesis of multiwalled carbon nanotubes on Al2O3 supported Ni catalysts in a fluidized‐bed
Multiwalled carbon nanotubes (MWNTs) were synthesized on Al2O3 supported Ni catalysts from C2H2 and C2H4 feedstocks in a fluidized bed. The influence of the ratio of superficial gas velocity to the minimum fluidization velocity (U/Umf), feedstock type, the ratio of carbon in the total quantity of gas fed to the reactor, reaction temperature, the ratio of hydrogen to carbon in the feed gas, and nickel loading were all investigated. Significantly, the pressure drop across the fluidized‐bed increased as the reaction time increased for all experiments, due to the deposition of MWNTs on the catalyst particles. This resulted in substantial changes to the depth and structure of the fluidized bed as the reaction proceeded, significantly altering the bed hydrodynamics. TEM images of the bed materials showed that MWNTs, metal catalysts, and alumina supports were predominant in the product mixture, with some coiled carbon nanotubes as a by‐product. © 2009 American Institute of Chemical Engineers AIChE J, 2009
- 21 April 2009
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 12 (2) , 645-653
Synthesis of coiled carbon nanotubes on Co/Al2O3 catalysts in a fluidised-bed
- 21 April 2009
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 12 (2) , 645-653
Synthesis of coiled carbon nanotubes on Co/Al2O3 catalysts in a fluidised-bed
- 3 November 2008
- Published by Wiley in AIChE Journal
- Vol. 54 (12) , 3303-3307
Postsynthesis microwave treatment to give high‐purity multiwalled carbon nanotubes
- 3 November 2008
- Published by Wiley in AIChE Journal
- Vol. 54 (12) , 3303-3307
Postsynthesis microwave treatment to give high‐purity multiwalled carbon nanotubes
- 23 July 2008
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 3 (5) , 473-480
Non-isothermal thermogravimetric analysis of plywood wastes under N2, CO2and O2atmospheres
- 23 July 2008
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 3 (5) , 473-480
Non-isothermal thermogravimetric analysis of plywood wastes under N2, CO2and O2atmospheres