Keith R. Underwood

The objective of this research was to investigate the influence of beef hot carcass weight (HCW) on consumer sensory attributes. Beef carcasses (n = 116) were selected based on the USDA quality grade and HCW. Lightweight (LW; 296–341 kg), middleweight (MW; 386–432 kg), or heavyweight (HW; 466–524 kg) carcasses with USDA Choice (LC) or USDA Select (SEL) quality grades were used in this study. Carcasses were tracked through fabrication and the semitendinosus, chuck roll, and strip loin were collected and fabricated into eye of round, Denver cut, and strip loin steaks, respectively, for consumer sensory evaluation. USDA Select MW Denver cut steaks had increased overall liking and texture liking scores and were more tender and juicier than the SEL LW steaks (p ≤ 0.02). USDA Select MW strip loin steaks had increased overall and flavor liking scores and were more tender than the SEL LW steaks (p ≤ 0.02). USDA Choice MW eye of round steaks had increased overall, flavor, and texture liking scores and were juicier than the LW eye of round steaks (p ≤ 0.04). The steaks evaluated in this study were differentially impacted by HCW and little to no clear pattern of effects could be determined across cut or quality grade. Additional research is needed to determine the most acceptable HCW from a consumer perspective.

To determine the effects of zilpaterol hydrochloride (ZH) on growth performance, carcass characteristics and meat quality for steers differing in breed type, steers with British (B; n = 76) or British × Continental (BC; n = 57) backgrounds were allocated to a randomized incomplete block design with a 2 × 2 treatment structure. Pens within each block × breed type were randomly assigned to either ZH (8.3 mg/kg of DM; fed for 20 d before slaughter, followed by a 3-day withdrawal) or control (CON; 0 mg/kg ZH). Steers were subjected to ultrasound immediately before ZH inclusion and following withdrawal to determine the influence of ZH on changes in longissimus muscle area (LMA), fat thickness and percent intramuscular fat (IMF). Carcass data were collected, and the longissimus lumborum was collected for analysis of tenderness, moisture percentage, crude fat content, collagen content, postmortem proteolysis and sensory attributes. The ZH × breed type interaction did not influence (p > 0.05) the feedlot performance, carcass or meat quality attribute traits evaluated, with the exception of moisture percentage. Responses among breed types were as expected for B vs. BC cattle types. Supplementation with ZH improved (p < 0.05) LMA and yield grade but increased Warner–Bratzler shear force.

The objective of this study was to determine the influence of grain- and grass-finishing systems on carcass characteristics of bison bulls and proximate and fatty acid compositions of bison steaks. Bison bulls grazed native pasture until approximately 25 mo of age, then were randomly assigned to grain-finishing (n=98) or grass-finishing (n=98) treatments. Bulls were slaughtered at approximately 30 mo of age. Hot carcass weight (HCW), ribeye area, backfat thickness, kidney fat percentage, marbling score, and instrumental color (L*,a*, and b*) of the ribeye and subcutaneous fat were recorded. Skeletal maturity, lean maturity, and fat color were subjectively scored. Strip loins were collected from a sub-sample of carcasses, fabricated into 2.5-cm steaks, and designated for proximate, cholesterol, or fatty acid analyses. Grain-finished bulls had greater (P<0.0001) HCW, dressing percentage, ribeye area, backfat thickness, kidney fat percentage,and marbling score. The a* and b* values of the ribeye and a* value of subcutaneous fat were greater (P<0.0001), but the L* and b* values of subcutaneous fat were less (P<0.0001) for grain-finished bulls. A greater proportion (P<0.001) of grain-finished carcasses had moderately bright red lean color, whereas a greater proportion (P<0.0001) of grass-finished carcasses had moderately yellow fat color. Steaks from grain-finished bulls had an increased percentage of crude protein (P<0.0001), fat (P<0.0001), and ash (P=0.0006) content but less moisture (P<0.0001). Steaks from grain-finished bulls had more (P<0.001) cholesterol and palmitic, stearic, oleic, linoleic, and arachidonic acids in addition to more total fatty acids (mg/g of wet tissue). However, for total fatty acids, grass-finished steaks had a greater (P<0.0001) percentage of polyunsaturated fatty acids. These data indicate that the finishing system influences the composition of bison bull carcasses as well as the nutrient profile of bison meat.

To determine the influence of the source of gestational and postnatal Cu and Zn supplementation on cow and calf performance, cows (n = 287) were assigned to one of the following two treatments: (1) inorganic (INORG) treatment, in which cows were supplemented with 15 mg of Cu (as CuSO₄) and 15 mg of Zn (as ZnSO₄) per kg of diet DM, or (2) organic (ORG) treatment, in which cows were supplemented with 15 mg of Cu (as Cu proteinate; Bioplex Cu, Alltech, Inc., Nicholasville, KY, USA) and 15 mg of Zn (as Zn proteinate; Bioplex Zn, Alltech, Inc., Nicholasville, KY, USA) per kg of diet DM. The treatments were initiated prior to breeding and continued throughout gestation until weaning. Liver biopsies were collected for analysis of mineral content. Cow body condition score (BCS), body weight (BW), pregnancy data, calf weaning weight (WW), and antibody response of the calves were recorded. The cows receiving the INORG treatment had a greater BW (p < 0.05) and BCS (p < 0.01) at breeding in Year 2, while the cows on the ORG treatment had a greater (p < 0.05) BW at weaning in Year 2. The cows that received the ORG mineral had improved (p < 0.05) conception rates in Year 1. The calves receiving the ORG treatment had heavier (p < 0.05) 205-day adjusted WWs.

Fat smearing, or poor fat particle definition, impacts the visual quality of sausage. However, objective methods of assessing fat smearing have not been identified. Therefore, the objective of this experiment was to determine the relationship between fat smearing and instrumental color analysis for fresh sausages to create a standard method for using instrumental color in fat smearing analysis. Meat blocks of pork (PK), beef (BF), and a mixture of pork and beef (P/B) were formed and processed at three different temperatures to create varying degrees of fat smearing. The average fat smearing score of each sausage was used to determine if a relationship existed with instrumental color measurements (CIE L*, a*, b*, and reflectance percentage at 580 nm and 630 nm) and color calculations. A correlation was observed for L* (R = −0.704) and the reflectance at 580 nm (R = −0.775) to PK fat smearing (p < 0.05). In P/B sausage, both reflectances at ratios between 630 nm and 580 nm were correlated to P/B fat smearing. No measurement or calculation was correlated with BF fat smearing (p > 0.05). Therefore, it is possible to use instrumental color analysis for the evaluation of fat smearing in pork and pork/beef blended sausage products, but not in beef sausage products.

The objective of this study was to determine the impact of environmental temperature during subprimal transporton moisture loss, color, and tenderness. Cases of striploins (n=24) and sirloins (n=24) were placed on 2 pallets. Each pallet was loaded on a refrigerated truck prechilled to −2.2°C (−2.2FT) or 3.3°C (3.3FT) and transported for 12 h prior to arriving at the South Dakota State University (SDSU) Meat Laboratory. One subprimal was subset from each case for further analysis. Purge loss was measured prior to fabrication into eight 2.54-cm steaks. Steaks were overwrapped and packaged in modified atmosphere packaging prior to a second transport. Four steaks from each subprimal were placed on 1 of 2 pallets. Each pallet was placed on a prechilled refrigerated truck set at −2.2°C or 3.3°C. The steaks were transported for 12 h prior to returning to SDSU, subjected to case life analysis, and stored fresh or frozen. Steaks were evaluated for color, cook loss, purge loss, and Warner-Bratzler shear force. Data were analyzed as a split plot design with main effects of first transport temperature, second transport temperature, and aging day. Data from fresh and frozen product were analyzed separately. Purge loss was increased for 3.3FT sirloins compared with −2.2FT (P=0.0362). L* values for −2.2FT strip steaks were increased (P<0.0001) and purge loss decreased (P=0.0188) compared with 3.3FT steaks. L* values and fresh steak purge loss for 3.3FT sirloins were increased (P=0.0356 and P=0.0460, respectively) compared with −2.2FT steaks. These data indicate varied responses to temperature differences based on subprimal. Thus, a universal recommendation for all meat products could not be made. Further investigation into the impacts of transportation temperatures on various meat products is vital to optimization of the meat supply chain.

This study investigated the impacts of metabolizable protein (MP) restriction in primiparous heifers during mid- and/or late-gestation on progeny performance and carcass characteristics. Heifers were allocated to 12 pens in a randomized complete block design. The factorial treatment structure included two stages of gestation (mid- and late-) and two levels of dietary protein (control (CON); ~101% of MP requirements and restricted (RES); ~80% of MP requirements). Half of the pens on each treatment were randomly reassigned to the other treatment at the end of mid-gestation. Progeny were finished in a GrowSafe feeding system and carcass measurements were collected. Gestation treatment x time interactions indicated that MP restriction negatively influenced heifer body weight (BW), body condition score, and longissimus muscle (LM) area (p < 0.05), but not fat thickness (p > 0.05). Treatment did not affect the feeding period, initial or final BW, dry matter intake, or average daily gain of progeny (p > 0.05). The progeny of dams on the RES treatment in late gestation had a greater LM area (p = 0.04), but not when adjusted on a hot carcass weight basis (p > 0.10). Minimal differences in the animal performance and carcass characteristics suggest that the level of MP restriction imposed during mid- and late-gestation in this study did not have a significant developmental programming effect.

The objective of this research was to investigate the influence of maternal prepartum dietary carbohydrate source on growth performance, carcass characteristics, and meat quality of offspring. Angus-based cows were assigned to either a concentrate-based diet or forage-based diet during mid- and late-gestation. A subset of calves was selected for evaluation of progeny performance. Dry matter intake (DMI), body weight (BW), average daily gain (ADG), gain to feed (G:F), and ultrasound measurements (muscle depth, back fat thickness, and intramuscular fat) were assessed during the feeding period. Carcass measurements were recorded, and striploins were collected for Warner-Bratzler shear force (WBSF), trained sensory panel, crude fat determination and fatty acid profile. Maternal dietary treatment did not influence (p > 0.05) offspring BW, DMI, ultrasound measurements, percent moisture, crude fat, WBSF, or consumer sensory responses. The forage treatment tended to have decreased (p = 0.06) 12th rib backfat compared to the concentrate treatment and tended to have lower (p = 0.08) yield grades. The concentrate treatment had increased (p < 0.05) a* and b* values compared to the forage treatment. These data suggest variation in maternal diets applied in this study during mid- and late-gestation has limited influence on progeny performance.

The concept of fetal programming is based on the idea that nutritional status and environmental conditions encountered by the dam during pregnancy can have lifetime impacts on her offspring. These changes in the gestational environment have been shown to influence fetal development and subsequent growth performance, carcass composition, and meat quality characteristics. Beef fetuses can be particularly prone to experiencing variations in the maternal environment during development owing to a relatively long duration of pregnancy potentially exposing the dam to environmental temperature stress and/or seasonal conditions that can compromise feed quality or quantity. If feed is limited or forage conditions are poor, a maternal deficiency in protein and/or energy can occur as well as fluctuations in body condition of the dam. As a result, the fetus may receive inadequate levels of nutrients, potentially altering fetal development. There are critical windows of development during each stage of gestation in which various tissues, organs, and metabolic systems may be impacted. Skeletal muscle and adipose tissue are particularly vulnerable to alterations in the gestational environment because of their low priority for nutrients relative to vital organs and systems during development. The timing and severity of the environmental event or stressor as well as the ability of the dam to buffer negative effects to the fetus will dictate the developmental response. Much of the current research is focused on the influence of specific nutrients and timing of nutritional treatments on offspring carcass composition and meat quality, with the goal of informing strategies that will ultimately allow for the use of maternal nutritional management as a tool to optimize performance and meat quality of offspring.

Brassica cover crops are an option for producers to incorporate into their cropping system to improve soil health and also provide a feed resource for cattle. While brassica cover crops have been widely used for grazing cows, their use as a backgrounding feedstuff is relatively unknown. The objective of this study was to determine the impact of feeding a brassica cover crop mixture during backgrounding on live animal performance and carcass characteristics. A total of 30 Angus-based steers were assigned to one of two dietary treatments during backgrounding 1) ad libitum access to a diet containing freshly cut brassica cover crop forage (CC) containing radish, turnip, rapeseed, rye grass, and a liquid supplement or 2) common Midwestern dry lot growing diet containing silage, soybean meal, grass hay, and a liquid supplement (CON). Steers were assigned to electronic feed bunks (Insentec RIC, Hokofarm Group; Marknesse, the Netherlands) for collection of individual feed intake. Diets were formulated to be nutritionally similar on a dry matter basis. Steers were paired by weight across treatments and pair fed. Dry matter intake (DMI) was calculated daily for steers in the CC treatment and the following day, CON steers were allowed access to an equal amount of dry matter using the Insentec RIC system. Steers were weighed weekly and backgrounded for 44 days before transitioning to a common finishing diet and weighed every 28 days. Steers were harvested at an estimated average backfat thickness of 1 cm. Standard carcass data were measured and strip loins and shoulder clods were collected. Instrumental and subjective color were measured on ground beef for 8 days and instrumental color was measured on strip steaks for 11 days. Treatment did not influence carcass characteristics, average daily gain, and DMI (P > 0.17). However, CON steers exhibited increased gain to feed ratio (P = 0.02). Additionally, a treatment by day interaction was observed for ground beef discoloration as the CC treatment displayed increased discoloration on days 4, 6, and 7 of case life (P < 0.01). These data indicate that brassicas may be utilized in a backgrounding diet without negatively impacting carcass characteristics but may decrease case life of ground beef.