Muhammad Abid
Research Subjects
Research Interests
Muhammad Abid has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
David H. Nash
University of Strathclyde
2 shared publications- David H. Nash
Department of Mechanical & Aerospace Engineering, University of Strathclyde, 75 Montrose Street, Glasgow G1 1XJ, UK
2 shared publications Abdul Waheed Awan
GIK Institute of Engineering Sciences and Technology
1 shared publication- Abdul Waheed Awan
Associate Professor, Faculty of Mechanical Engineering, GIK Institute of Engineering Sciences and Technology, Topi, NWFP, Pakistan
1 shared publication - Alexander Galloway
Department of Mechanical & Aerospace Engineering, University of Strathclyde, 75 Montrose St, Glasgow G1 1XJ, UK
1 shared publication Baseer Ullah
Associate Professor, Faculty of Mechanical Engineering, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi NWFP 23460, Pakistan
1 shared publication
Latest Publications
- 1 September 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 139 (9) , 1268-1277
Effect of Torch Angle on Arc Properties and Weld Pool Shape in Stationary GTAW
In this paper, a three-dimensional (3D) numerical simulation is performed on a stationary arc to study the effect of torch angles in gas tungsten arc welding (GTAW) of SS304 stainless steel. A comparison has been made to investigate 90 and 70° torch angles and analyze the effect on arc and weld pool shape. Current density, heat flux, and gas shear stress are calculated in the arc region and are used as input to the workpiece to determine the weld pool. Also, both buoyancy and Marangoni shear affect the weld pool shape and are taken into account. The computed and experimental results are observed as symmetric for the 90° torch angle. For the 70° torch angle, current density and hence the heat flux from electron contribution is found to be the maximum behind the electrode tip in the welding direction. Heat flux from conduction and convection is found to be the maximum ahead of the electrode tip in the welding direction. This makes the maximum of total heat flux symmetric along the arc center. Heat flux from conduction and convection decreases as the torch angle decreases resulting in a shallow weld pool. The nonsymmetric -shaped weld pool is developed by the combined effect of the gas shear and Marangoni convection. It is found that for the 70° torch angle, the weld pool becomes nonsymmetric, shallow, and wide ahead of the electrode tip in the welding direction. The numerical weld pool shapes are verified through experiments.- 1 September 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 139 (9) , 1268-1277
Effect of Torch Angle on Arc Properties and Weld Pool Shape in Stationary GTAW
In this paper, a three-dimensional (3D) numerical simulation is performed on a stationary arc to study the effect of torch angles in gas tungsten arc welding (GTAW) of SS304 stainless steel. A comparison has been made to investigate 90 and 70° torch angles and analyze the effect on arc and weld pool shape. Current density, heat flux, and gas shear stress are calculated in the arc region and are used as input to the workpiece to determine the weld pool. Also, both buoyancy and Marangoni shear affect the weld pool shape and are taken into account. The computed and experimental results are observed as symmetric for the 90° torch angle. For the 70° torch angle, current density and hence the heat flux from electron contribution is found to be the maximum behind the electrode tip in the welding direction. Heat flux from conduction and convection is found to be the maximum ahead of the electrode tip in the welding direction. This makes the maximum of total heat flux symmetric along the arc center. Heat flux from conduction and convection decreases as the torch angle decreases resulting in a shallow weld pool. The nonsymmetric -shaped weld pool is developed by the combined effect of the gas shear and Marangoni convection. It is found that for the 70° torch angle, the weld pool becomes nonsymmetric, shallow, and wide ahead of the electrode tip in the welding direction. The numerical weld pool shapes are verified through experiments.- 1 December 2010
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 136 (12) , 1519-1527
Performance of a Nongasketed Flange Joint under Combined Internal Pressure and Bending Loading
Performance of a bolted flange joint is characterized mainly due to its “strength” and “sealing capability.” A number of analytical and experimental studies have been conducted to study these characteristics only under internal pressure loading. A very limited amount of work is found in the literature under combined internal pressure and bending loading. Due to the ignorance of this external loading, i.e., bending loading, the optimized performance of the bolted flange joint cannot be achieved. The present design codes do not address the effects of bending loading on the structural integrity and sealing ability. To investigate joint strength and sealing capability under combined loading, an extensive comparative experimental and numerical study of a nongasketed flange joint is carried out and overall joint performance and behavior is discussed. Actual joint load capacity is determined under both the design and proof test pressure with maximum additional external bending loading that can be applied for safe joint performance. In addition, as experimentally it is impossible to test different flange joint sizes under combined loading application, hence finite element model developed and verified with the experimental results, presented in this paper can be used as base to study the behavior for different nongasketed flange joint sizes for different classes under combined pressure and bending loading.
- 1 December 2010
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 136 (12) , 1519-1527
Performance of a Nongasketed Flange Joint under Combined Internal Pressure and Bending Loading
Performance of a bolted flange joint is characterized mainly due to its “strength” and “sealing capability.” A number of analytical and experimental studies have been conducted to study these characteristics only under internal pressure loading. A very limited amount of work is found in the literature under combined internal pressure and bending loading. Due to the ignorance of this external loading, i.e., bending loading, the optimized performance of the bolted flange joint cannot be achieved. The present design codes do not address the effects of bending loading on the structural integrity and sealing ability. To investigate joint strength and sealing capability under combined loading, an extensive comparative experimental and numerical study of a nongasketed flange joint is carried out and overall joint performance and behavior is discussed. Actual joint load capacity is determined under both the design and proof test pressure with maximum additional external bending loading that can be applied for safe joint performance. In addition, as experimentally it is impossible to test different flange joint sizes under combined loading application, hence finite element model developed and verified with the experimental results, presented in this paper can be used as base to study the behavior for different nongasketed flange joint sizes for different classes under combined pressure and bending loading.
- 7 October 2010
- Published by Springer Nature in Experimental Techniques
- Vol. 35 (6) , 35-37
PERFORMANCE TESTING OF A GASKETED BOLTED FLANGE PIPE JOINT UNDER COMBINED PRESSURE AND THERMAL LOADING
- 7 October 2010
- Published by Springer Nature in Experimental Techniques
- Vol. 35 (6) , 35-37
PERFORMANCE TESTING OF A GASKETED BOLTED FLANGE PIPE JOINT UNDER COMBINED PRESSURE AND THERMAL LOADING
- 1 February 2010
- Published by Springer Nature in Sādhanā
- Vol. 35 (1) , 31-43
Relaxation behaviour of gasketed joints during assembly using finite element analysis
- 1 February 2010
- Published by Springer Nature in Sādhanā
- Vol. 35 (1) , 31-43
Relaxation behaviour of gasketed joints during assembly using finite element analysis
- 7 April 2009
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 131 (3) , 031203
Stamina of a Nongasketed Flange Joint Under Combined Internal Pressure, Axial, and Bending Loading: An Experimental Study
Performance of a bolted flange joint is characterized mainly due to its “strength” and “sealing capability.” A number of analytical and experimental studies have been conducted to study these characteristics only under internal pressure loading. A very limited work is found in the literature under combined internal pressure and bending loading. Due to the ignorance of this external loading, i.e., bending and axial in addition to the internal pressure loading, the optimized performance of the bolted flange joint cannot be achieved. The present design codes do not address the effects of combined loading on the structural integrity and sealing ability. To investigate joint strength and sealing capability under combined loading, an extensive experimental study of a nongasketed flange joint with two different assemblies and with different load combinations is carried out, and overall joint performance and behavior is discussed. Actual joint load capacity is determined under both the design and proof test pressure with maximum additional external loading (axial and bending) that can be applied for safe joint performance. In addition, application of combined load is also discussed in the light of equivalent pressure approach.
- 7 April 2009
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 131 (3) , 031203
Stamina of a Nongasketed Flange Joint Under Combined Internal Pressure, Axial, and Bending Loading: An Experimental Study
Performance of a bolted flange joint is characterized mainly due to its “strength” and “sealing capability.” A number of analytical and experimental studies have been conducted to study these characteristics only under internal pressure loading. A very limited work is found in the literature under combined internal pressure and bending loading. Due to the ignorance of this external loading, i.e., bending and axial in addition to the internal pressure loading, the optimized performance of the bolted flange joint cannot be achieved. The present design codes do not address the effects of combined loading on the structural integrity and sealing ability. To investigate joint strength and sealing capability under combined loading, an extensive experimental study of a nongasketed flange joint with two different assemblies and with different load combinations is carried out, and overall joint performance and behavior is discussed. Actual joint load capacity is determined under both the design and proof test pressure with maximum additional external loading (axial and bending) that can be applied for safe joint performance. In addition, application of combined load is also discussed in the light of equivalent pressure approach.
- 1 February 2007
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 133 (2) , 222-229
Three-Dimensional Nonlinear Finite-Element Analysis of Gasketed Flange Joint under Combined Internal Pressure and Variable Temperatures
Performance of a flange joint is characterized mainly due to its “strength” and “sealing capabilit.” A number of analytical and experimental studies have been conducted to study these characteristics only under internal pressure loading. The effect of steady state thermal loading is a well recognized problem and makes the problem more complex under combined application of internal pressure and temperature. To investigate fundamental joint characteristics, joint strength and sealing capability under combined internal pressure, and variable steady state thermal loading, a three-dimensional nonlinear finite-element analysis of gasketed flange joint is carried out using ANSYS commercial software. Reduced joint strength is concluded due to the flange rotation resulting in flange yielding under bolt up and applied operating conditions. Reduced joint sealing is concluded due to the variation in gasket seating or contact pressure due to bolt load variation. Flange rotation, bolt bending, and joint relaxation concluded fatigue and dynamic behavior in the gasketed joint. These effects are observed to be more pronounced at higher temperatures. Verification of finite-element model with available classical theories is also performed and discussed.
- 1 February 2007
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 133 (2) , 222-229
Three-Dimensional Nonlinear Finite-Element Analysis of Gasketed Flange Joint under Combined Internal Pressure and Variable Temperatures
Performance of a flange joint is characterized mainly due to its “strength” and “sealing capabilit.” A number of analytical and experimental studies have been conducted to study these characteristics only under internal pressure loading. The effect of steady state thermal loading is a well recognized problem and makes the problem more complex under combined application of internal pressure and temperature. To investigate fundamental joint characteristics, joint strength and sealing capability under combined internal pressure, and variable steady state thermal loading, a three-dimensional nonlinear finite-element analysis of gasketed flange joint is carried out using ANSYS commercial software. Reduced joint strength is concluded due to the flange rotation resulting in flange yielding under bolt up and applied operating conditions. Reduced joint sealing is concluded due to the variation in gasket seating or contact pressure due to bolt load variation. Flange rotation, bolt bending, and joint relaxation concluded fatigue and dynamic behavior in the gasketed joint. These effects are observed to be more pronounced at higher temperatures. Verification of finite-element model with available classical theories is also performed and discussed.
- 20 June 2005
- Published by Springer Nature in Acta Mechanica
- Vol. 178 (1) , 53-64
Finite-element simulation of tack welds in girth welding of a pipe-flange joint
- 20 June 2005
- Published by Springer Nature in Acta Mechanica
- Vol. 178 (1) , 53-64
Finite-element simulation of tack welds in girth welding of a pipe-flange joint