MOMaged A. Osman

Maged A. Osman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Maged A. Osman has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Low‐Melting Nematic Quasi‐Rigid Rod‐Like Polyesters

    by Maged A. Osman

    Thermotropic quasi‐rigid rod‐like polyesters with broad nematic phases in temperature ranges that allow melt processing in the mesophase have been synthesized. The desired mesomorphic temperature range can be realized by adjusting the chain flexibility and packing density as well as the axial ratio of the mesogenic segments. The chain flexibility was slightly increased without giving the molecule much conformational freedom by introducing ethylene or dioxyethylene linkages between the phenyl groups of the aromatic polyester (preferably in the acid part of the molecule). The sensitive balance between the axial ratio of the mesogenic segments and the chain flexibility was preserved to retain the mesogeneity of the molecule. Replacing some of the planar aromatic phenyl groups by staggered trans‐cyclohexyl moieties effectively depresses Tm without affecting Ti. The effect of symmetrical and asymmetrical lateral substitution with alkyl groups of different van der Waals volume on Tm and Ti was studied. Asymmetric lateral substitution is quite effective in depressing Tm with little effect on Ti. Combinations of these structural modifications are useful tools to adjust the mesomorphic properties of liquid crystalline polyesters. magnified image


  • Open Access

    Surfactant Chain Length and Tensile Properties of Calcium Carbonate‐Polyethylene Composites

    by Maged A. Osman, Ayman Atallah

    Micron‐sized CaCO3 particles free of milling additives were coated with a monolayer of aliphatic carboxylic acids of different chain length (C2, C4, C5, C10, and C18). CaCO3 was compounded with LDPE at different loading, and the tensile properties of the composites were measured and correlated to the length of the alkyl chains tethered to the particles' surface. SEM indicated that the particles are well dispersed (no agglomerates). The inclusions show little influence on the polymer crystallization, and the filler surface treatment leads to a slight decrease in polymer crystallinity that grows with increasing chain length of the fatty acid. The tensile modulus, yield stress, and maximum stress increase with increasing filler volume fraction ϕ, and the dependence is a function of the length of the alkyl chains tethered to the CaCO3 surface. It seems that the interphase thickness and properties depend on the alkyl chain length and strongly influence the modulus and stresses measured. With increasing chain length in the coated organic layer, the interfacial adhesion between the inclusions and the polymer matrix decreases, and the fibril formation increases. The tensile properties are the result of a superimposition of all these effects. The yield and ultimate strains are dominated by the interfacial slippage (increases with growing alkyl chain length) that leads to debonding at high deformations. Surface treatment of CaCO3 with valeric acid leads to the maximum possible tensile modulus, yield stress, and tensile strength combined with a relatively small loss in yield and ultimate strain. magnified image


  • Open Access

    Cover Picture: Macromol. Chem. Phys. 1/2007

    by Maged A. Osman, Ayman Atallah


  • Interfacial Adhesion and Composite Viscoelasticity

    by Maged A. Osman, Ayman Atallah

    Summary: The viscoelastic properties of 30 vol.‐% composites of calcite, surface‐treated with fatty acids of different chain length, and polyethylene were studied. The alkyl chains decrease the surface energy of the particles and the adhesion between the polymer and the filler. The moduli of the composites decrease with decreasing interfacial adhesion. When the shear forces applied overcome the adhesion forces, interfacial slippage takes place. Terminal OH groups in the alkyl chains enhance the particles' agglomeration, leading to a solid‐like response in the low frequency region. The presence of a plateau in the log moduli versus log frequency plot can be due to local structures and is not necessarily an evidence of a percolating filler network. Steady shear viscosity (σ = 1 000 Pa) of 30 vol.‐% surface‐treated (different acids) CaCO3‐HDPE composites plotted as a function of the number of carbon atoms in the alkyl chains of the coated monolayer. The dotted line is simply a guide to the eye. magnified image Steady shear viscosity (σ = 1 000 Pa) of 30 vol.‐% surface‐treated (different acids) CaCO3‐HDPE composites plotted as a function of the number of carbon atoms in the alkyl chains of the coated monolayer. The dotted line is simply a guide to the eye.


  • Organo-vermiculites: synthesis, structure and properties. Platelike nanoparticles with high aspect ratio

    by Maged A. Osman

    Organo-vermiculites with large d-spacing, advantageous for the synthesis of polymer nanocomposites, were prepared by exchanging the mineral inorganic cations for quaternary alkylammonium ions. The interlayer Mg2+ of the pristine vermiculite was exchanged by Na+ in advance to enhance the exchange with the organic cations. The organophylization of the mineral was monitored by determining its exchange capacity as well as the organic surface coverage. Alkylammonium ions with different chain length and number of chains attached to the nitrogen atom were exchanged and the properties of the organo-vermiculites investigated by infrared spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). Dioctadecyldimethylamonium–vermiculite showed a d-spacing as large as 3.9 nm. The alkylammonium ions self-assemble on the vermiculite surface, leading to an ordered two-dimensional lattice, in which the alkyl chains preferentially assume an all-trans conformation. On heating, conformational transformation of the alkyl chains gradually takes place resulting in a dynamically disordered phase. The transition from an ordered all-trans conformation to a dynamically disordered state manifests itself in IR-absorption and carbon resonance frequency shifts accompanied by an abrupt enthalpy change. The transition temperature and enthalpy depend on the alkyl chain length and packing density.


  • Interfacial Interactions and Properties of Polyethylene‐Layered Silicate Nanocomposites

    by Maged A. Osman, Jörg E. P. Rupp

    Summary: Organically modified montmorillonites (OMs), carrying alkyl chains, phenyl groups, or a combination of both, were prepared and compounded with polyethylene. The oxygen permeability coefficients and tensile properties of the nanocomposites were correlated to the exfoliation of the OMs. Partial exfoliation was achieved, although no intercalation was observed. Aromatic moieties attached to the clay surface led to a stronger interaction between the OM layers and less exfoliation. Transmission electron micrograph of a 2.8 vol.‐% dioctadecyldimethylammonium nanocomposite. The dark lines are cross sections of aluminosilicate layers. magnified image Transmission electron micrograph of a 2.8 vol.‐% dioctadecyldimethylammonium nanocomposite. The dark lines are cross sections of aluminosilicate layers.


  • High‐Density Polyethylene Micro‐ and Nanocomposites: Effect of Particle Shape, Size and Surface Treatment on Polymer Crystallinity and Gas Permeability

    by Maged A. Osman, Ayman Atallah

    Summary: High‐density polyethylene (HDPE) micro‐ and nanocomposites with spherical and platelike inclusions were prepared and the effect of filler particles on polymer crystallinity and gas permeability was investigated. Platelike inclusions strongly reduce the polymer permeability coefficient, while spherical ones have no influence on it, irrespective of their size. The reduction in gas permeability depends on the average aspect ratio of the inclusions, which in turn depends on the exfoliation of the organo‐montmorillonites (OM) and consequently on its surface treatment. A TEM micrograph of 3 vol.‐% 2C18 · M‐HDPE nanocomposite, showing partial exfoliation of the organo‐montmorillonite. image A TEM micrograph of 3 vol.‐% 2C18 · M‐HDPE nanocomposite, showing partial exfoliation of the organo‐montmorillonite.


  • The Aspect Ratio and Gas Permeation in Polymer‐Layered Silicate Nanocomposites

    by Maged A. Osman, Vikas Mittal, Hans Rudolf Lusti

    Summary: Organophilized montmorillonite‐epoxy and ‐polyurethane nanocomposites, useful for packaging applications, were prepared and their oxygen permeability was measured. The composite morphology was mixed, exfoliated and intercalated, as shown by wide‐angle X‐ray diffraction (WAXRD) and transmission electron microscopy (TEM). The gas‐barrier performance of the polyurethane composites was better than that of the epoxy composites due to more exfoliation. The average aspect ratio of the montmorillonite platelets in the nanocomposites could be estimated from the reduction in permeability by a numerical finite element approach. A computer model comprising 50 randomly distributed and oriented round platelets with an aspect ratio of 50 at 3 vol.‐% loading, periodic boundary conditions applied. image A computer model comprising 50 randomly distributed and oriented round platelets with an aspect ratio of 50 at 3 vol.‐% loading, periodic boundary conditions applied.