XJXavier Janson

Xavier Janson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xavier Janson has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Stratal surfaces honoring seismic structures and interpreted geologic time surfaces

    by Fu Wang, Xinming Wu, Hongliu Zeng, Xavier Janson, Charles Kerans

    Seismic horizons play a significant role in reservoir model construction and sedimentary facies interpretation, providing crucial low-frequency constraints for seismic inversion. In basin and regional interpretations, the assumption that seismic reflections represent a stratigraphic surface with constant geologic time is significant for guiding seismic interpretation. This assumption may fail when applied to local reservoir scales due to common geologic time transgressions of a particular event in regular wavelet frequency. There will be inconsistencies between seismic events and stratigraphic surfaces. To address this issue and obtain relatively accurate stratal interpretations, we develop a hybrid horizon extraction method honoring seismic structures and time-stratigraphic frameworks, in which seismic reflection structures provide local details and interpreted geologic time surfaces offer critical constraints. First, we develop concepts and a workflow using a realistic outcrop model. We develop a new geology-guided structure tensor by fitting a gradient vector of seismic images and geologic time surfaces. We also consider existing geologic conditions, such as unconformities, and fuse them into our method to calculate accurate slopes and generate reliable relative geologic time images at a fine scale, followed by making slices. Further, we extend our method to 3D seismic data volumes. Our experiments, conducted using simulated and field data, show the superiority and accuracy of our hybrid method compared with the slope-based and stratal slicing methods. These results highlight the potential for applying our method to fine-scale subsurface modeling.


  • Paleokarst reservoirs: Efficient and flexible characterization using point-spread-function-based convolution modeling

    by Kristian Jensen, Martin Kyrkjebø Johansen, Isabelle Lecomte, Xavier Janson, Jan Tveranger, Tina Kaschwich

    Paleokarst originates from the collapse, degradation, and infill of karstified rock, and it typically features spatially heterogeneous elements such as breakdown products, sediment infills, and preserved open cavities on all scales. Paleokarst may further contain aquifer or hydrocarbon reservoirs and may pose a drilling hazard during exploration. Seismic characterization of paleokarst reservoirs therefore remains a challenging and important task. We have determined how the application of 2D (3D) spatial convolution operators, referred to as point-spread functions (PSFs), allows for seismic modeling of complex and heterogeneous paleokarst geology at a cost equivalent to conventional repeated 1D convolution. Unlike the latter, which only considers vertical resolution effects, PSF-based convolution modeling yields simulated prestack depth-migrated images accounting for 3D resolution effects vertically and laterally caused by acquisition geometries, frequency-band limitations, and propagation effects in the overburden. We confirm the validity of the approach by a comparison of modeled results to results obtained from a published physical modeling experiment. Finally, we present four additional separate case studies to highlight the usability and flexibility of the approach by assessing different issues and challenges pertaining to characterizing and interpreting seismic features of paleokarst. Through PSF-based convolution modeling, geoscientists working with paleokarst seismic data may be better able to understand how various acquisition and modeling parameters affect seismic images of paleokarst geology.


  • Seismic chronostratigraphy at reservoir scale: Lessons from a realistic seismic modeling of mixed clastic-carbonate strata in the Permian Basin, West Texas and New Mexico, USA

    by Hongliu Zeng, Yawen He, Charles Kerans, Xavier Janson

    We tested the validity of tracking seismic events as representations of chronostratigraphic surfaces at the subseismic, high-frequency-cycle level. A high-resolution geocellular model was generated from approximately 400 m of mixed clastic-carbonate sequences in the San Andres and Grayburg Formations in the Permian Basin, with 0.3–0.6 m layering and minimal upscaling. Realistic stratigraphic framework, facies, and velocity volumes were created by geostatistically mapping data from outcrop and subsurface sources while honoring state-of-the-art principles of stratigraphic and sedimentary analyses. Using the synthetic seismic data of different frequencies, the potential and pitfalls of using autotracked seismic horizons in building high-resolution reservoir models were tested. At the reservoir (meter) scale, the seismic reflections from flatter and thicker sediments with less facies and velocity heterogeneities tend to follow geologic-time surfaces; on the contrary, reflections from where thin sediments dip against flat strata with more facies and velocity heterogeneities tend to follow lithostratigraphy. For the latter seismic-guided reservoir modeling is not very precise, even with data as high as 140 Hz frequency. Therefore, for seismic-assisted reservoir prediction and modeling, the interpretation of seismic events is useful, but well calibration is critical.


  • Sediment gravity-flow deposits and three-dimensional stratigraphic architectures of the linked Cutoff, upper Bone Spring, and upper Avalon system, Delaware Basin

    by Gregory S. Hurd, Charles Kerans, Edmund L. Frost, J. Antonio Simo, Xavier Janson

    The Bone Spring play and associated Avalon subplay represent a succession of calcareous, siliceous, and carbonaceous sediment gravity-flow deposits associated with significant production of oil, condensate, and dry gas in the Delaware Basin, Texas. Correlation of the upper Bone Spring and upper Avalon systems to the outcropping Cutoff Formation slope system and lower San Andres composite sequence (Permian composite sequence 9 [PCS9], 2–4 m.y.) in the Guadalupe Mountains region allows us to investigate how slope and basinal accumulation patterns are linked to deposit types and migration patterns of the active sediment factory (shelf system). The Cutoff–upper Bone Spring–upper Avalon interval in the northern Delaware Basin records the multivariate evolution of a deep-water system associated with a drowned carbonate platform margin (large-scale inflection) characterized by (1) an increase in the rate of sediment supply to the drowned platform, (2) a transition along the relict platform from styles of sediment transport dominated by turbidity currents to styles dominated by mass-transport events, and (3) a landward shift in the locus of deposition downdip of the relict shelf margin. Reservoir-prone strata of PCS9 associated with turbidite systems demonstrate basinward-stepping geometries along shallow slope gradients downdip of the relict shelf margin and aggradational geometries along steep slopes. Nonreservoir strata associated with carbonate-rich mass-transport deposits of PCS9 accumulate near the relict shelf margin on both shallow and steep slopes. Insights developed from this study can help to improve exploration activities in the Delaware Basin and in other basins having analogous deep-water systems.


  • Matrix microcrystalline structure and acoustic properties of oomoldic dolograinstone

    by Xavier Janson, F. Jerry Lucia

    Previous studies have shown that carbonate rock with rounded moldic macropores has a higher compressional velocity at a given porosity than rock with interparticle or intercrystalline porosity and high-aspect-ratio macropores. Our study of Permian dolograinstone challenges this commonly accepted result. Petrophysical and acoustic velocities were measured on 55 mini core plugs collected along an approximately 1 km long horizontal transect within a single grainstone unit having lateral changes from grainstone with dominantly interparticle porosity to grainstone with mostly moldic porosity. The studied dolograinstone samples have a large scattering of acoustic velocity (up to 1500 m/s) at equal porosity. Some oomoldic grainstone samples have either higher velocity or significantly lower velocity than that of the intercrystalline grainstone samples. Petrographic analysis under plain light and UV light combined with mercury injection capillary pressure data and scanning electron microscopy analysis indicates that moldic samples with a lower than average velocity for a given porosity have a matrix with between 50% and 75% of the total porosity as intercrystalline microporosity between large moldic pores. Conversely, rocks with a higher than average velocity for a given porosity find a lack of micropores in the microcrystalline part of the matrix. The amount of micro- and mesoporosity in the matrix is the primary control on acoustic properties of those moldic dolograinstone samples. Therefore, the matrix microcrystalline structure can exert a stronger control on acoustic property than do the macropore types and shapes. These results indicate that using acoustic data from the subsurface to identify pore shape and reservoir properties still remains a challenge.


  • Mut Basin, Turkey: Miocene carbonate depositional styles and mixed systems in an icehouse setting

    by Phil Bassant, Xavier Janson, Frans van Buchem, Kemal Gurbuz, Kadir Eriş

    The Mut Basin in southcentral Turkey contains a rich variety of Cenozoic carbonate deposits that developed on a complex pre-Miocene topography and can be studied in seismic-scale, three-dimensional outcrops. These include open and rimmed carbonate shelves with steep slopes, small isolated platforms, and mixed carbonate–siliciclastic systems showing reciprocal sedimentation. The exceptional preservations of the stratal geometries make it possible to easily link large-scale depositional geometry to depositional facies in a variety of platform types and depositional environments. The Mut Basin provides a better understanding of (1) the control of antecedent topography on carbonate platform development, (2) the influence of icehouse conditions (e.g., high-amplitude, high-frequency sea level fluctuations) on the carbonate system, (3) the link between faunal evolution and the style of carbonate platforms and stratigraphic architecture, (4) lateral and reciprocal carbonate and siliciclastic sedimentation, (5) platform asymmetry and local controls on stratal geometries, and (6) the architecture of steep carbonate margin and associated gravitational collapse deposits. These concepts are directly applicable to time-equivalent Cenozoic carbonate reservoir systems in Southeast Asia, the southern Caribbean, and the eastern Mediterranean.


  • Open Access

    Carbonate facies and reservoir quality of the Kujung Formation in Kangean Island, East Java, Indonesia

    by Takashi Shimazu, Xavier Janson, Masahiko Yagi, Yuji Ichimaru

    Although the Late Oligocene - Early Miocene Kujung Formation is one of the important exploration targets in the Kangean PSC Block where JAPEX share the interest with Mitsubishi Corporation and Energi Mega Persada, no commercial hydrocarbon accumulation from this formation have been discovered yet in the block. In the Kangean area, the relationship between facies and reservoir quality in the Kujung Formation carbonates are not well understood. In this study, geological survey in Kangean Island and petrological analysis using outcrop samples (totally 88 samples) were conducted to evaluate reservoir qualities of the Kujung Formation carbonates. Our study reveals that the Kujung Formation in the island is divided into 10 facies (F0 - F9) based on lithology, texture, sedimentary structures and bioclastic content. These facies are grouped into 3 facies associations (FA1-FA3) based on large scales depositional environments. Reservoir qualities of the Kujung Formation are generally controlled by pore system related with the facies associations and diagenesis. Since mechanical/chemical compaction during burial diagenesis is the most common effect on shelf slope and outer shelf facies, these sediments have micro porosities or are tight carbonates. These show permeability lower than 2 mD regardless of porosity values. In contrast, moldic/vuggy porosity is abundant in shallow marine facies by calcite cementation in interparticle porosity and dissolution of carbonate grains. These facies show fair to excellent reservoir qualities. Furthermore, results of core plugs and thin-sections analysis and observation indicate that connectivity of secondary pores is critical for enhanced permeability commonly by solution-enlargement. Our study also implies that shallow marine facies are likely to undergo multi-phase subaerial exposure events causing improvement of reservoir quality rather than outer shelf slope and outer shelf facies.


  • Lithofacies Analysis and Stratigraphic Architecture of a Deep-Water Carbonate Debris Apron: Lower Cretaceous (Latest Aptian to Latest Albian) Tamabra Formation, Poza Rica Field Area, Mexico

    by Robert G. Loucks, Charles Kerans, Xavier Janson, M. Alfredo Marhx Rojano, R. Craig Shipp, Paul Weimer, Henry W. Posamentier

    Deep-water carbonate debris aprons adjacent to shallow-water platforms are complex depositional features that are produced by density-flow and suspension processes. Sediment is supplied from the platform margin and from biota living in the shallower part of the open sea. The Lower Cretaceous (latest Aptian to latest Albian) Tamabra Formation in the Poza Rica field area of eastern Mexico is a debris apron deposited adjacent to the western side of the Tuxpan Platform in east-central Mexico. Its stratal architecture is well defined by 3-D seismic, cores, and wireline-log data, allowing analysis of depositional processes that created the lithofacies and sequence stratigraphic controls on depositional architecture and patterns. Within the Tamabra debris apron, an orderly pattern of depositional units reflects the control of relative sea-level changes on the availability of source material and types of density flows generated. Thick intervals of debris-flow and mud-flow deposits, composed of platform- and slope-derived carbonate muds, skeletal grains, and clasts, are interpreted as being deposited during sea-level lowstands and transgressions or during early highstands when the platform was rapidly aggrading, whereas thick intervals of hyperconcentrated to concentrated density-flow and turbidite deposits, composed of skeletal sands, are interpreted as having been deposited when the platform was flooded and shedding during highstands of sea level. The Tamabra debris apron is an excellent analog for comparing with other carbonate debris aprons and for use in deciphering other debris aprons having poor data control.


  • Controlling Parameters on Facies Geometries of the Bahamas, an Isolated Carbonate Platform Environment

    by Kelly L. Bergman, Hildegard Westphal, Xavier Janson, Anthony Poiriez, Gregor P. Eberli