Gerd Hirzinger
Research Subjects
Gerd Hirzinger has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Alin Albu-Schaffer
German Aerospace Center (DLR)
5 shared publications M. Schedl
Institute of Robotics and Mechatronics
5 shared publicationsJ. Butterfaß
Institute of Robotics and Mechatronics
4 shared publications- Markus Grebenstein
German Aerospace Center (DLR), Institute of Robotics and Mechatronics, Wessling, Germany
4 shared publications N. Sporer
Institute of Robotics and Mechatronics
4 shared publications- Sami Haddadin
Technical University of Munich
3 shared publications
Latest Publications
- 12 December 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. 18 (4) , 20-34
Study on Soft-Tissue Injury in Robotics
This article details the analysis of soft-tissue injuries caused by sharp tools that are mounted on/grasped by a robot. The evaluation is considered as the next step down the road to a complete safety analysis of robots for human-robot interaction (HRI). We conduct an analysis of soft-tissue injuries based on available biomechanical and forensic data and present various experimental results with biological tissue for validation. Furthermore, possible countermeasures are proposed and evaluated by means of measurable injury reduction.
- 12 December 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. 18 (4) , 20-34
Study on Soft-Tissue Injury in Robotics
This article details the analysis of soft-tissue injuries caused by sharp tools that are mounted on/grasped by a robot. The evaluation is considered as the next step down the road to a complete safety analysis of robots for human-robot interaction (HRI). We conduct an analysis of soft-tissue injuries based on available biomechanical and forensic data and present various experimental results with biological tissue for validation. Furthermore, possible countermeasures are proposed and evaluated by means of measurable injury reduction.
- 10 February 2009
- Published by Wiley in Journal of Field Robotics
- Vol. 26 (3) , 287-307
Ground verification of the feasibility of telepresent on‐orbit servicing
In an ideal casetelepresenceachieves a state in which a human operator can no longer differentiate between an interaction with a real environment and a technical mediated one. This state is called transparent telepresence. The applicability of telepresence to on‐orbit servicing (OOS), i.e., an unmanned servicing operation in space, teleoperated from ground in real time, is verified in this paper. For this purpose, a communication test environment was set up on the ground, which involved the Institute of Astronautics (LRT) ground station in Garching, Germany, and the European Space Agency (ESA) ground station in Redu, Belgium. Both were connected via the geostationary ESA data relay satellite ARTEMIS. Utilizing the data relay satellite, a teleoperation was accomplished in which the human operator as well as the (space) teleoperator was located on the ground. The feasibility of telepresent OOS was evaluated, using an OOS test bed at the Institute of Mechatronics and Robotics at the German Aerospace Center (DLR). The manipulation task was representative for OOS and supported real‐time feedback from the haptic‐visual workspace. The tests showed that complex manipulation tasks can be fulfilled by utilizing geostationary data relay satellites. For verifying the feasibility of telepresent OOS, different evaluation methods were used. The properties of the space link were measured and related to subjective perceptions of participants, who had to fulfill manipulation tasks. An evaluation of the transparency of the system, including the data relay satellite, was accomplished as well.
- 10 February 2009
- Published by Wiley in Journal of Field Robotics
- Vol. 26 (3) , 287-307
Ground verification of the feasibility of telepresent on‐orbit servicing
In an ideal casetelepresenceachieves a state in which a human operator can no longer differentiate between an interaction with a real environment and a technical mediated one. This state is called transparent telepresence. The applicability of telepresence to on‐orbit servicing (OOS), i.e., an unmanned servicing operation in space, teleoperated from ground in real time, is verified in this paper. For this purpose, a communication test environment was set up on the ground, which involved the Institute of Astronautics (LRT) ground station in Garching, Germany, and the European Space Agency (ESA) ground station in Redu, Belgium. Both were connected via the geostationary ESA data relay satellite ARTEMIS. Utilizing the data relay satellite, a teleoperation was accomplished in which the human operator as well as the (space) teleoperator was located on the ground. The feasibility of telepresent OOS was evaluated, using an OOS test bed at the Institute of Mechatronics and Robotics at the German Aerospace Center (DLR). The manipulation task was representative for OOS and supported real‐time feedback from the haptic‐visual workspace. The tests showed that complex manipulation tasks can be fulfilled by utilizing geostationary data relay satellites. For verifying the feasibility of telepresent OOS, different evaluation methods were used. The properties of the space link were measured and related to subjective perceptions of participants, who had to fulfill manipulation tasks. An evaluation of the transparency of the system, including the data relay satellite, was accomplished as well.
- 1 January 2008
- Published by Walter de Gruyter GmbH in Journal of Applied Geodesy
- Vol. 2 (3)
A correlation based target finder for terrestrial laser scanning
Many calibration and registration methodsud for optical sensors require highly accurate andud robust detection of markers. To date, many di¤erentud approaches for detecting markers have been developed.ud However, all of these share certain disadvantages,ud depending on the optical sensor and theirud application. We have developed a novel approachud for high-accuracy target point detection based onud normed cross-correlation from symmetric patterns.ud The method has been specifically developed for terrestrialud laser scanning, but may also work for otherud types of optical sensors due to its vision based properties.ud Our method is robust to noise and invariant toud rotation, translation and perspective projection. It isud scale invariant and also works in varying distances.ud In addition, the cross-correlation function allowsud quality control. Another advantage of this method isud that only a few parameters need to be adjusted. Consequently,ud it is applicable in field test scenarios. Theud method does not require a certain target pattern.ud The only constraint on the target type is that afterud projecting it perspectively, a region around the targetud center has to remain symmetric and the approximateud position of the target center has to be known. Our resultsud demonstrate the robustness and accuracy of thisud method which we have validated in field applications
- 1 January 2008
- Published by Walter de Gruyter GmbH in Journal of Applied Geodesy
- Vol. 2 (3)
A correlation based target finder for terrestrial laser scanning
Many calibration and registration methodsud for optical sensors require highly accurate andud robust detection of markers. To date, many di¤erentud approaches for detecting markers have been developed.ud However, all of these share certain disadvantages,ud depending on the optical sensor and theirud application. We have developed a novel approachud for high-accuracy target point detection based onud normed cross-correlation from symmetric patterns.ud The method has been specifically developed for terrestrialud laser scanning, but may also work for otherud types of optical sensors due to its vision based properties.ud Our method is robust to noise and invariant toud rotation, translation and perspective projection. It isud scale invariant and also works in varying distances.ud In addition, the cross-correlation function allowsud quality control. Another advantage of this method isud that only a few parameters need to be adjusted. Consequently,ud it is applicable in field test scenarios. Theud method does not require a certain target pattern.ud The only constraint on the target type is that afterud projecting it perspectively, a region around the targetud center has to remain symmetric and the approximateud position of the target center has to be known. Our resultsud demonstrate the robustness and accuracy of thisud method which we have validated in field applications
- Open Access
- 1 January 2008
- Published by IntechOpen
Motion Tracking for Minimally Invasive Robotic Surgery
- 1 January 2008
- Published by IntechOpen
Open AccessMotion Tracking for Minimally Invasive Robotic Surgery
- 9 October 2007
- Published by Springer Nature
- p. 21-47
Torque-controlled Light Weight Arms and Articulated Hands — Do We Reach Technological Limits Now?
- 9 October 2007
- Published by Springer Nature
- p. 21-47
Torque-controlled Light Weight Arms and Articulated Hands — Do We Reach Technological Limits Now?
- 2 September 2007
- Published by Springer Nature
- p. 569-570
A new Generation of Light-weight Robot Arms and Multifingerd Hands
- 2 September 2007
- Published by Springer Nature
- p. 569-570
A new Generation of Light-weight Robot Arms and Multifingerd Hands
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 3824-3830
MIMO State Feedback Controller for a Flexible Joint Robot with Strong Joint Coupling
The paper describes the modeling and control of a robot with flexible joints (the DLR medical robot), which has strong mechanical couplings between pairs of joints realized with a differential gear-box. Because of this coupling, controllers developed before for the DLR light-weight robots cannot be directly applied. The previous control approach is extended in order to allow a multi-input-multi-output (MIMO) design for the strongly coupled joints. Asymptotic stability is shown for the MIMO controller. Finally, experimental results with the DLR medical robot are presented.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 3824-3830
MIMO State Feedback Controller for a Flexible Joint Robot with Strong Joint Coupling
The paper describes the modeling and control of a robot with flexible joints (the DLR medical robot), which has strong mechanical couplings between pairs of joints realized with a differential gear-box. Because of this coupling, controllers developed before for the DLR light-weight robots cannot be directly applied. The previous control approach is extended in order to allow a multi-input-multi-output (MIMO) design for the strongly coupled joints. Asymptotic stability is shown for the MIMO controller. Finally, experimental results with the DLR medical robot are presented.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
- No. 10504729,p. 4367-4372
Feedback linearization and simultaneous stiffness-position control of robots with antagonistic actuated joints
In this paper, the dynamic model of a robot with antagonistic actuated joints is presented, and the problem of full linearization via static state feedback is analyzed. The use of transmission elements with nonlinear relation between the displacement and the actuated force allows to control both the position and the stiffness of each joint. The main advantage of this actuation modality is that the achieved stiffness becomes a mechanical characteristic of the system and it is not the result of an immediate control action as in the classical impedance control scheme (Davison, 2003). Different examples of implementation of this kind of devices are known in literature, even if limited to one single joint (Kjita et al., 2003; Laumond and Kineocam, 2006; Mansard and Chaumette, 2004 and 2006) and the application of antagonistic actuated kinematic chains in the field of robotic hand design is under investigation (Stasse et al., 2006). After a brief review of the dependence of the properties of antagonistic actuation on the transmission elements characteristics, a scheme for simultaneous stiffness-position control of the linearized system is presented. Finally, simulation results of a two-link antagonistic actuated arm are reported and discussed.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
- No. 10504729,p. 4367-4372
Feedback linearization and simultaneous stiffness-position control of robots with antagonistic actuated joints
In this paper, the dynamic model of a robot with antagonistic actuated joints is presented, and the problem of full linearization via static state feedback is analyzed. The use of transmission elements with nonlinear relation between the displacement and the actuated force allows to control both the position and the stiffness of each joint. The main advantage of this actuation modality is that the achieved stiffness becomes a mechanical characteristic of the system and it is not the result of an immediate control action as in the classical impedance control scheme (Davison, 2003). Different examples of implementation of this kind of devices are known in literature, even if limited to one single joint (Kjita et al., 2003; Laumond and Kineocam, 2006; Mansard and Chaumette, 2004 and 2006) and the application of antagonistic actuated kinematic chains in the field of robotic hand design is under investigation (Stasse et al., 2006). After a brief review of the dependence of the properties of antagonistic actuation on the transmission elements characteristics, a scheme for simultaneous stiffness-position control of the linearized system is presented. Finally, simulation results of a two-link antagonistic actuated arm are reported and discussed.