Li-Qun Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Li-Qun Wang has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
Kehua Tu
MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University , Hangzhou 310027, P. R. China
14 shared publicationsHongjun Wang
MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University , Hangzhou 310027, P. R. China
8 shared publicationsFang Yuan
MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University , Hangzhou 310027, P. R. China
5 shared publicationsHongliang Jiang
MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, P. R. China
5 shared publications- Kehua Tu
MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China
5 shared publications - Songwei Tan
School of Pharmacy, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China
5 shared publications
Latest Publications
- Open Access
- 31 October 2021
- Published by AccScience Publishing in International Journal of Bioprinting
- Vol. 7 (4) , 112-122
Cellulose Nanocrystal-Enhanced Thermal-Sensitive Hydrogels of Block Copolymers for 3D Bioprinting
The hydrogel formed by polyethylene glycol-aliphatic polyester block copolymers is an ideal bioink and biomaterial ink for three-dimensional (3D) bioprinting because of its unique temperature sensitivity, mild gelation process, good biocompatibility, and biodegradability. However, the gel forming mechanism based only on hydrophilichydrophobic interaction renders the stability and mechanical strength of the formed hydrogels insufficient, and cannot meet the requirements of extrusion 3D printing. In this study, cellulose nanocrystals (CNC), which is a kind of rigid, hydrophilic, and biocompatible nanomaterial, were introduced to enhance the hydrogels so as to meet the requirements of extrusion 3D printing. First, a series of poly(ε-caprolactone/lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone/ lactide) (PCLA-PEG-PCLA) triblock copolymers with different molecular weights were prepared. The thermodynamic and rheological properties of CNC-enhanced hydrogels were investigated. The results showed that the addition of CNC significantly improved the thermal stability and mechanical properties of the hydrogels, and within a certain range, the enhancement effect was directly proportional to the concentration of CNC. More importantly, the PCLA-PEG-PCLA hydrogels enhanced by CNC could be extruded and printed through temperature regulation. The printed objects had high resolution and fidelity with effectively maintained structure. Moreover, the hydrogels have good biocompatibility with a high cell viability. Therefore, this is a simple and effective strategy. The addition of the hydrophilic rigid nanoparticles such as CNC improves the mechanical properties of the soft hydrogels which made it able to meet the requirements of 3D bioprinting.
- 31 October 2021
- Published by AccScience Publishing in International Journal of Bioprinting
- Vol. 7 (4) , 112-122
Open AccessCellulose Nanocrystal-Enhanced Thermal-Sensitive Hydrogels of Block Copolymers for 3D Bioprinting
The hydrogel formed by polyethylene glycol-aliphatic polyester block copolymers is an ideal bioink and biomaterial ink for three-dimensional (3D) bioprinting because of its unique temperature sensitivity, mild gelation process, good biocompatibility, and biodegradability. However, the gel forming mechanism based only on hydrophilichydrophobic interaction renders the stability and mechanical strength of the formed hydrogels insufficient, and cannot meet the requirements of extrusion 3D printing. In this study, cellulose nanocrystals (CNC), which is a kind of rigid, hydrophilic, and biocompatible nanomaterial, were introduced to enhance the hydrogels so as to meet the requirements of extrusion 3D printing. First, a series of poly(ε-caprolactone/lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone/ lactide) (PCLA-PEG-PCLA) triblock copolymers with different molecular weights were prepared. The thermodynamic and rheological properties of CNC-enhanced hydrogels were investigated. The results showed that the addition of CNC significantly improved the thermal stability and mechanical properties of the hydrogels, and within a certain range, the enhancement effect was directly proportional to the concentration of CNC. More importantly, the PCLA-PEG-PCLA hydrogels enhanced by CNC could be extruded and printed through temperature regulation. The printed objects had high resolution and fidelity with effectively maintained structure. Moreover, the hydrogels have good biocompatibility with a high cell viability. Therefore, this is a simple and effective strategy. The addition of the hydrophilic rigid nanoparticles such as CNC improves the mechanical properties of the soft hydrogels which made it able to meet the requirements of 3D bioprinting.
- 31 January 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 6 (12) , 1825-1833
A photosensitizer loaded hemoglobin–polymer conjugate as a nanocarrier for enhanced photodynamic therapy
Photodynamic therapy (PDT) has emerged as a promising therapeutic option for various cancers. During the photosensitizer-mediated PDT procedure, oxygen is activated as a reactive oxygen species (ROS) upon light irradiation to induce vascular damage and cancer cell death directly. However, PDT efficiency can be seriously reduced in the hypoxic environment of the tumour. Even worse, the oxygen consumption of PDT aggravates the hypoxia, which leads to further PDT inefficiency and other negative consequences. Herein, a new kind of hemoglobin–polymer conjugate (HbTcMs) was prepared as the carrier for both oxygen and the photosensitizer to enhance photodynamic therapy. The conjugated Hb exhibited an improved tolerance to the oxidation and trypsin digestion while retaining its O2 binding capacity compared with free Hb. The HbTcMs conjugate showed little toxicity in the dark and could be effectively internalized by 4T1 cells. More importantly, the HbTcMs conjugate could readily produce singlet oxygen (1O2) and kill 4T1 cells in vitro under irradiation, exerting better phototoxicity with the oxygen supply of Hb. Therefore, it is expected that the HbTcMs conjugate can be a potential oxygen carrier for application in photodynamic therapy.
- 31 January 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 6 (12) , 1825-1833
A photosensitizer loaded hemoglobin–polymer conjugate as a nanocarrier for enhanced photodynamic therapy
Photodynamic therapy (PDT) has emerged as a promising therapeutic option for various cancers. During the photosensitizer-mediated PDT procedure, oxygen is activated as a reactive oxygen species (ROS) upon light irradiation to induce vascular damage and cancer cell death directly. However, PDT efficiency can be seriously reduced in the hypoxic environment of the tumour. Even worse, the oxygen consumption of PDT aggravates the hypoxia, which leads to further PDT inefficiency and other negative consequences. Herein, a new kind of hemoglobin–polymer conjugate (HbTcMs) was prepared as the carrier for both oxygen and the photosensitizer to enhance photodynamic therapy. The conjugated Hb exhibited an improved tolerance to the oxidation and trypsin digestion while retaining its O2 binding capacity compared with free Hb. The HbTcMs conjugate showed little toxicity in the dark and could be effectively internalized by 4T1 cells. More importantly, the HbTcMs conjugate could readily produce singlet oxygen (1O2) and kill 4T1 cells in vitro under irradiation, exerting better phototoxicity with the oxygen supply of Hb. Therefore, it is expected that the HbTcMs conjugate can be a potential oxygen carrier for application in photodynamic therapy.
- 1 January 2018
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 161, 10-17
The exploration of endocytic mechanisms of PLA-PEG nanoparticles prepared by coaxialtri-capillary electrospray-template removal method
- 1 January 2018
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 161, 10-17
The exploration of endocytic mechanisms of PLA-PEG nanoparticles prepared by coaxialtri-capillary electrospray-template removal method
- Open Access
- 13 October 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (76) , 48166-48175
Synthesis of a hemoglobin-conjugated triblock copolymer for oxygen carrying and specific recognition of cancer cells
Tumour hypoxia, which has a negative effect on most anti-cancer treatments, has caused extensive concern over recent years. Concerned with this issue, this paper reports a hemoglobin-based oxygen nanocarrier (HBOC) functionalized with oxygen carrying and cancer cell recognition ability. First, the triblock copolymer poly[2-(methacrylamido) glucopyranose]-b-poly(methacrylicacid)-b-poly(butylmethacrylate) (PMAG-b-PMAA-b-PBMA), in which the first block consists of glucose units, was synthesized and characterized. Following the self-assembly of the amphiphilic copolymer into micelles in phosphate buffer solution, hemoglobin was conjugated onto the micelles through a condensation reaction between the carboxyl groups on PMAA and the amino groups on Hb. The HBOC, with a mean diameter of around 147 nm, is stable and disperses homogeneously in phosphate buffer solution. In addition, an in vitro cytotoxicity study revealed that the HBOC is biocompatible. More importantly, this HBOC was demonstrated to hold excellent capacity for oxygen binding. Moreover, cellular uptake indicated that the HBOC was internalized more easily by cancer cells than normal cells, which means that the HBOC shows specific recognition of cancer cells. Therefore, the hemoglobin-conjugated polymer that we prepared could be a promising nanocarrier for tumour therapy.
- 13 October 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (76) , 48166-48175
Open AccessSynthesis of a hemoglobin-conjugated triblock copolymer for oxygen carrying and specific recognition of cancer cells
Tumour hypoxia, which has a negative effect on most anti-cancer treatments, has caused extensive concern over recent years. Concerned with this issue, this paper reports a hemoglobin-based oxygen nanocarrier (HBOC) functionalized with oxygen carrying and cancer cell recognition ability. First, the triblock copolymer poly[2-(methacrylamido) glucopyranose]-b-poly(methacrylicacid)-b-poly(butylmethacrylate) (PMAG-b-PMAA-b-PBMA), in which the first block consists of glucose units, was synthesized and characterized. Following the self-assembly of the amphiphilic copolymer into micelles in phosphate buffer solution, hemoglobin was conjugated onto the micelles through a condensation reaction between the carboxyl groups on PMAA and the amino groups on Hb. The HBOC, with a mean diameter of around 147 nm, is stable and disperses homogeneously in phosphate buffer solution. In addition, an in vitro cytotoxicity study revealed that the HBOC is biocompatible. More importantly, this HBOC was demonstrated to hold excellent capacity for oxygen binding. Moreover, cellular uptake indicated that the HBOC was internalized more easily by cancer cells than normal cells, which means that the HBOC shows specific recognition of cancer cells. Therefore, the hemoglobin-conjugated polymer that we prepared could be a promising nanocarrier for tumour therapy.
- 1 May 2016
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 141, 278-283
A new strategy based on electrospray technique to prepare dual-responsive poly(ether urethane) nanogels
- 1 May 2016
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 141, 278-283
A new strategy based on electrospray technique to prepare dual-responsive poly(ether urethane) nanogels
- 7 August 2015
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 16 (9) , 2693-2700
Synthesis of Hemoglobin Conjugated Polymeric Micelle: A ZnPc Carrier with Oxygen Self-Compensating Ability for Photodynamic Therapy
Photodynamic therapy (PDT) is a promising singlet oxygen (1O2) mediated clinical treatment for many tumors. As the source of 1O2, oxygen plays an important role in the curative effect of PDT. However, the facts of photochemical depletion of oxygen and the intrinsic hypoxic microenvironment of tumors remain the major challenges. In this work, a novel photosensitizer carrier with oxygen self-compensating ability was designed for PDT. It was synthesized via chemical conjugation of hemoglobin (Hb) to polymeric micelles formed by triblock copolymers of poly(ethylene glycol)-block-poly(acrylic acid)-block-polystyrene (PEG-b-PAA-b-PS). The PEG-b-PAA-b-PS and resultant micelles in aqueous solution were comprehensively characterized by means of FTIR, 1H NMR, GPC, DLS, TEM, and fluorescence spectroscopy. The oxygen-binding capacity and antioxidative activity of the Hb conjugated micelles were evaluated via UV–vis spectroscopy. In addition, compared with the control micelles without Hb, the Hb conjugated photosensitizer carrier was able to generate more 1O2 and exert greater photocytotoxicity on Hela cells in vitro.
- 7 August 2015
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 16 (9) , 2693-2700
Synthesis of Hemoglobin Conjugated Polymeric Micelle: A ZnPc Carrier with Oxygen Self-Compensating Ability for Photodynamic Therapy
Photodynamic therapy (PDT) is a promising singlet oxygen (1O2) mediated clinical treatment for many tumors. As the source of 1O2, oxygen plays an important role in the curative effect of PDT. However, the facts of photochemical depletion of oxygen and the intrinsic hypoxic microenvironment of tumors remain the major challenges. In this work, a novel photosensitizer carrier with oxygen self-compensating ability was designed for PDT. It was synthesized via chemical conjugation of hemoglobin (Hb) to polymeric micelles formed by triblock copolymers of poly(ethylene glycol)-block-poly(acrylic acid)-block-polystyrene (PEG-b-PAA-b-PS). The PEG-b-PAA-b-PS and resultant micelles in aqueous solution were comprehensively characterized by means of FTIR, 1H NMR, GPC, DLS, TEM, and fluorescence spectroscopy. The oxygen-binding capacity and antioxidative activity of the Hb conjugated micelles were evaluated via UV–vis spectroscopy. In addition, compared with the control micelles without Hb, the Hb conjugated photosensitizer carrier was able to generate more 1O2 and exert greater photocytotoxicity on Hela cells in vitro.
- 6 May 2015
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 3 (22) , 4546-4554
Facile preparation of cancer-specific polyelectrolyte nanogels from natural and synthetic sugar polymers
Glyco-nanogels are glycopolymer-decorated nanoparticles of three-dimensional cross-linked networks, which have attracted ever-increasing interest of the biomedical-related community. However, most of the current reported glycosylated nanogels are prepared by copolymerization of glycopolymers with co-monomers and cross-linkers. Physically self-assembled glyco-nanogels remain a big challenge and are rarely explored. Herein, we report a new synthesis of glycosylated polyelectrolyte nanogels (glyco/CS nanogels), which are self-assembled from glycopolymers (PMAG-b-PMAA) synthesized through reversible addition–fragmentation chain transfer polymerization (RAFT) and quaternary ammonium chitosan (QACS) via electrostatic interactions under physiological conditions (pH 7.4, NaCl 0.15 M). The resultant glyco-nanogels have been demonstrated to be very stable in 10 mM HEPES buffer solution at least for 7 days and possess a specific binding capability to Con A. Their structure composed of an ionically cross-linked core and a glucose corona was confirmed by TEM. Compared with normal cells, glyco/CS nanogels exhibited a much higher affinity and cytotoxicity towards K562 cancer cells. In addition, the cellular uptake of these nanogels by K562 was further imaged via fluorescent microscopy in which nanogels with yellow-green signals were found to eventually co-locate within the cell nuclei of K562. The incorporation of natural and synthetic sugar polymers into polyelectrolytes has provided an insight to easily prepare glyco-nanogels with excellent colloidal stability, specific bioactivities and imaging ability, suggesting their great potential for biomedical applications.
- 6 May 2015
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 3 (22) , 4546-4554
Facile preparation of cancer-specific polyelectrolyte nanogels from natural and synthetic sugar polymers
Glyco-nanogels are glycopolymer-decorated nanoparticles of three-dimensional cross-linked networks, which have attracted ever-increasing interest of the biomedical-related community. However, most of the current reported glycosylated nanogels are prepared by copolymerization of glycopolymers with co-monomers and cross-linkers. Physically self-assembled glyco-nanogels remain a big challenge and are rarely explored. Herein, we report a new synthesis of glycosylated polyelectrolyte nanogels (glyco/CS nanogels), which are self-assembled from glycopolymers (PMAG-b-PMAA) synthesized through reversible addition–fragmentation chain transfer polymerization (RAFT) and quaternary ammonium chitosan (QACS) via electrostatic interactions under physiological conditions (pH 7.4, NaCl 0.15 M). The resultant glyco-nanogels have been demonstrated to be very stable in 10 mM HEPES buffer solution at least for 7 days and possess a specific binding capability to Con A. Their structure composed of an ionically cross-linked core and a glucose corona was confirmed by TEM. Compared with normal cells, glyco/CS nanogels exhibited a much higher affinity and cytotoxicity towards K562 cancer cells. In addition, the cellular uptake of these nanogels by K562 was further imaged via fluorescent microscopy in which nanogels with yellow-green signals were found to eventually co-locate within the cell nuclei of K562. The incorporation of natural and synthetic sugar polymers into polyelectrolytes has provided an insight to easily prepare glyco-nanogels with excellent colloidal stability, specific bioactivities and imaging ability, suggesting their great potential for biomedical applications.
- 21 January 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (26) , 20155-20159
Synthesis of an amphiphilic hyperbranched polymer as a novel pH-sensitive drug carrier
An amphiphilic hyperbranched polymer containing large amounts of pH sensitive bonds was synthesized. The hydrophobic chains are hyperbranched polyacetals and the hydrophilic chains are polyethylene glycols, attached to the hyperbranched polyacetals by hydrazone bonds.
- 21 January 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (26) , 20155-20159
Synthesis of an amphiphilic hyperbranched polymer as a novel pH-sensitive drug carrier
An amphiphilic hyperbranched polymer containing large amounts of pH sensitive bonds was synthesized. The hydrophobic chains are hyperbranched polyacetals and the hydrophilic chains are polyethylene glycols, attached to the hyperbranched polyacetals by hydrazone bonds.
- 6 October 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (95) , 52940-52948
Dextran-based thermo-responsive hemoglobin–polymer conjugates with oxygen-carrying capacity
The potential toxicity towards human kidneys of hemoglobin (Hb), when used directly, has severely limited its application as a red blood cell substitute and in cancer treatments. In this work, a novel hemoglobin–polymer conjugate was prepared by a reaction between the lysine amino groups of Hb and the carboxyl groups of a copolymer, poly(N-isopropylacrylamide) grafted carboxylated dextran (HOOC-Dex-g-PNIPAAm), which was synthesized by single electron transfer living radical polymerization (SET-LRP) and post-carboxylation. The conjugate was characterized by FTIR, 1H NMR, SDS-PAGE, DLS, fluorescence spectroscopy and TEM. Results showed it had a relatively low critical micelle concentration (CMC) and could form stable spherical nanoparticles upon heating above the LCST. The redox activity and gas-binding capacity of the Hb conjugate were subsequently confirmed by UV-vis spectroscopy, indicating the retention of Hb bioactivity after conjugation. Furthermore, dextran with different numbers of PNIPAAm chains was synthesized for comparison. It revealed that at 37 °C, the temperature above the LCST, the conjugation of Hb to the copolymer Dex-g-PNIPAAm could improve the stability of Hb which increased with the number of PNIPAAm chains.
- 6 October 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (95) , 52940-52948
Dextran-based thermo-responsive hemoglobin–polymer conjugates with oxygen-carrying capacity
The potential toxicity towards human kidneys of hemoglobin (Hb), when used directly, has severely limited its application as a red blood cell substitute and in cancer treatments. In this work, a novel hemoglobin–polymer conjugate was prepared by a reaction between the lysine amino groups of Hb and the carboxyl groups of a copolymer, poly(N-isopropylacrylamide) grafted carboxylated dextran (HOOC-Dex-g-PNIPAAm), which was synthesized by single electron transfer living radical polymerization (SET-LRP) and post-carboxylation. The conjugate was characterized by FTIR, 1H NMR, SDS-PAGE, DLS, fluorescence spectroscopy and TEM. Results showed it had a relatively low critical micelle concentration (CMC) and could form stable spherical nanoparticles upon heating above the LCST. The redox activity and gas-binding capacity of the Hb conjugate were subsequently confirmed by UV-vis spectroscopy, indicating the retention of Hb bioactivity after conjugation. Furthermore, dextran with different numbers of PNIPAAm chains was synthesized for comparison. It revealed that at 37 °C, the temperature above the LCST, the conjugation of Hb to the copolymer Dex-g-PNIPAAm could improve the stability of Hb which increased with the number of PNIPAAm chains.
- 1 October 2014
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 122, 194-201
Novel chitosan-based pH-sensitive and disintegrable polyelectrolyte nanogels
- 1 October 2014
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 122, 194-201
Novel chitosan-based pH-sensitive and disintegrable polyelectrolyte nanogels