Majeed M. Hayat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Majeed M. Hayat has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Sanjay Krishna
The Ohio State University
4 shared publications - Balu Santhanam
Department of E.C.E., University of New Mexico, Albuquerque , NM 87131.
2 shared publications David A. Ramirez
Center for High Technology Materials, University of New Mexico, Albuquerque, NM, USA
2 shared publications- J. Scott Tyo
Electrical and Computer Systems Engineering Department, Monash University, Clayton, VIC, Australia
2 shared publications Andrew S. Huntington
Voxtel Inc., Beaverton, OR, USA
1 shared publicationBiliana Paskaleva
Dept. of Electr. & Comput. Eng., New Mexico Univ., Albuquerque, NM
1 shared publication
Latest Publications
- 5 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 1 (6) , 145-153
Instantaneous Receiver Operating Characteristic (ROC) Performance of Multi-Gain-Stage APD Photoreceivers
We describe the use of analytical and numerical models of a multi-gain-stage single-carrier multiplication (SCM) avalanche photodiode (APD) to generate time-resolved receiver operating-characteristic (ROC) curves. First, pseudo-DC analytic models of discrete multi-stage APDs are used to generate the statistical properties of the SCM APD necessary for ROC analysis. Next, numerical models are used to develop the joint probability density function (PDF) of the SCM APD gain and avalanche buildup time as a function of the device structure, material properties and local electric fields. The instantaneous (time-resolved) carrier count distributions resulting from photon- and dark-initiated impact ionization chains are used to calculate the mean and variance of the currents induced in the circuits of the photoreceiver over the integration times of the detection event. Last, autocorrelation functions are generated to allow the parameters of the signal, the noise and the signal embedded in noise-which are necessary for ROC hypothesis testing-to be calculated for the instances of the impulse response. It is shown that time-resolved ROC analysis of an APD photoreceiver, which includes the instantaneous properties of photon- and dark-initiated avalanche events, allows for better optimization of photoreceiver performance than does non-time-resolved ROC analysis.
- 5 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 1 (6) , 145-153
Instantaneous Receiver Operating Characteristic (ROC) Performance of Multi-Gain-Stage APD Photoreceivers
We describe the use of analytical and numerical models of a multi-gain-stage single-carrier multiplication (SCM) avalanche photodiode (APD) to generate time-resolved receiver operating-characteristic (ROC) curves. First, pseudo-DC analytic models of discrete multi-stage APDs are used to generate the statistical properties of the SCM APD necessary for ROC analysis. Next, numerical models are used to develop the joint probability density function (PDF) of the SCM APD gain and avalanche buildup time as a function of the device structure, material properties and local electric fields. The instantaneous (time-resolved) carrier count distributions resulting from photon- and dark-initiated impact ionization chains are used to calculate the mean and variance of the currents induced in the circuits of the photoreceiver over the integration times of the detection event. Last, autocorrelation functions are generated to allow the parameters of the signal, the noise and the signal embedded in noise-which are necessary for ROC hypothesis testing-to be calculated for the instances of the impulse response. It is shown that time-resolved ROC analysis of an APD photoreceiver, which includes the instantaneous properties of photon- and dark-initiated avalanche events, allows for better optimization of photoreceiver performance than does non-time-resolved ROC analysis.
- 22 March 2012
- Published by Optica Publishing Group in Optics Express
- Vol. 20 (7) , 8024-8040
Multiplication theory for dynamically biased avalanche photodiodes: new limits for gain bandwidth product
Novel theory is developed for the avalanche multiplication process in avalanche photodiodes (APDs) under time-varying reverse-biasing conditions. Integral equations are derived characterizing the statistics of the multiplication factor and the impulse-response function of APDs, as well as their breakdown probability, all under the assumption that the electric field driving the avalanche process is time varying and spatially nonuniform. Numerical calculations generated by the model predict that by using a bit-synchronous sinusoidal biasing scheme to operate the APD in an optical receiver, the pulse-integrated gain-bandwidth product can be improved by a factor of 5 compared to the same APD operating under the conventional static biasing. The bit-synchronized periodic modulation of the electric field in the multiplication region serves to (1) produce large avalanche multiplication factors with suppressed avalanche durations for photons arriving in the early phase of each optical pulse; and (2) generate low avalanche gains and very short avalanche durations for photons arriving in the latter part of each optical pulse. These two factors can work together to reduce intersymbol interference in optical receivers without sacrificing sensitivity.
- 22 March 2012
- Published by Optica Publishing Group in Optics Express
- Vol. 20 (7) , 8024-8040
Multiplication theory for dynamically biased avalanche photodiodes: new limits for gain bandwidth product
Novel theory is developed for the avalanche multiplication process in avalanche photodiodes (APDs) under time-varying reverse-biasing conditions. Integral equations are derived characterizing the statistics of the multiplication factor and the impulse-response function of APDs, as well as their breakdown probability, all under the assumption that the electric field driving the avalanche process is time varying and spatially nonuniform. Numerical calculations generated by the model predict that by using a bit-synchronous sinusoidal biasing scheme to operate the APD in an optical receiver, the pulse-integrated gain-bandwidth product can be improved by a factor of 5 compared to the same APD operating under the conventional static biasing. The bit-synchronized periodic modulation of the electric field in the multiplication region serves to (1) produce large avalanche multiplication factors with suppressed avalanche durations for photons arriving in the early phase of each optical pulse; and (2) generate low avalanche gains and very short avalanche durations for photons arriving in the latter part of each optical pulse. These two factors can work together to reduce intersymbol interference in optical receivers without sacrificing sensitivity.
- 3 December 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 11 (6) , 1342-1351
Multispectral Classification With Bias-Tunable Quantum Dots-in-a-Well Focal Plane Arrays
Mid-wave and long-wave infrared (IR) quantum-dots-in-a-well (DWELL) focal plane arrays (FPAs) are promising technology for multispectral (MS) imaging and sensing. The DWELL structure design provides the detector with a unique property that allows the spectral response of the detector to be continuously, albeit coarsely, tuned with the applied bias. In this paper, a MS classification capability of the DWELL FPA is demonstrated. The approach is based upon: 1) imaging an object repeatedly using a sequence of bias voltages in the tuning range of the FPA and then 2) applying a classification algorithm to the totality of readouts, over multiple biases, at each pixel to identify the “class” of the material. The approach is validated for two classification problems: separation among different combinations of three IR filters and discrimination between rocks. This work is the first demonstration of the MS classification capability of the DWELL FPA.
- 3 December 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 11 (6) , 1342-1351
Multispectral Classification With Bias-Tunable Quantum Dots-in-a-Well Focal Plane Arrays
Mid-wave and long-wave infrared (IR) quantum-dots-in-a-well (DWELL) focal plane arrays (FPAs) are promising technology for multispectral (MS) imaging and sensing. The DWELL structure design provides the detector with a unique property that allows the spectral response of the detector to be continuously, albeit coarsely, tuned with the applied bias. In this paper, a MS classification capability of the DWELL FPA is demonstrated. The approach is based upon: 1) imaging an object repeatedly using a sequence of bias voltages in the tuning range of the FPA and then 2) applying a classification algorithm to the totality of readouts, over multiple biases, at each pixel to identify the “class” of the material. The approach is validated for two classification problems: separation among different combinations of three IR filters and discrimination between rocks. This work is the first demonstration of the MS classification capability of the DWELL FPA.
- 22 June 2010
- Published by Wiley in physica status solidi (c)
- Vol. 7 (10) , 2548-2551
Linear‐mode operation of the quantum‐dot avalanche photodiode (QDAP)
- 22 June 2010
- Published by Wiley in physica status solidi (c)
- Vol. 7 (10) , 2548-2551
Linear‐mode operation of the quantum‐dot avalanche photodiode (QDAP)
- 22 February 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 10 (3) , 686-692
Shift Estimation Algorithm for Dynamic Sensors With Frame-to-Frame Variation in Their Spectral Response
This study is motivated by the emergence of a new class of tunable infrared spectral-imaging sensors that offer the ability to dynamically vary the sensor's intrinsic spectral response from frame to frame in an electronically controlled fashion. A manifestation of this is when a sequence of dissimilar spectral responses is periodically realized, whereby in every period of acquired imagery, each frame is associated with a distinct spectral band. Traditional scene-based global shift estimation algorithms are not applicable to such spectrally heterogeneous video sequences, as a pixel value may change from frame to frame as a result of both global motion and varying spectral response. In this paper, a novel algorithm is proposed and examined to fuse a series of coarse global shift estimates between periodically sampled pairs of nonadjacent frames to estimate motion between consecutive frames; each pair corresponds to two nonadjacent frames of the same spectral band. The proposed algorithm outperforms three alternative methods, with the average error being one half of that obtained by using an equal weights version of the proposed algorithm, one-fourth of that obtained by using a simple linear interpolation method, and one-twentieth of that obtained by using a nai¿ve correlation-based direct method.
- 22 February 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 10 (3) , 686-692
Shift Estimation Algorithm for Dynamic Sensors With Frame-to-Frame Variation in Their Spectral Response
This study is motivated by the emergence of a new class of tunable infrared spectral-imaging sensors that offer the ability to dynamically vary the sensor's intrinsic spectral response from frame to frame in an electronically controlled fashion. A manifestation of this is when a sequence of dissimilar spectral responses is periodically realized, whereby in every period of acquired imagery, each frame is associated with a distinct spectral band. Traditional scene-based global shift estimation algorithms are not applicable to such spectrally heterogeneous video sequences, as a pixel value may change from frame to frame as a result of both global motion and varying spectral response. In this paper, a novel algorithm is proposed and examined to fuse a series of coarse global shift estimates between periodically sampled pairs of nonadjacent frames to estimate motion between consecutive frames; each pair corresponds to two nonadjacent frames of the same spectral band. The proposed algorithm outperforms three alternative methods, with the average error being one half of that obtained by using an equal weights version of the proposed algorithm, one-fourth of that obtained by using a simple linear interpolation method, and one-twentieth of that obtained by using a nai¿ve correlation-based direct method.
- 1 January 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 535-539
Cochannel FM Demodulation via the Multi Angle-Centered Discrete Fractional Fourier Transform
The problem of demodulating multiple frequency modulated signals that overlap spectrally is seen to pervade communication systems both military and civilian, where bandwidth is a precious resource. In this paper, we extend the use of the recently developed multiangle discrete fractional Fourier transform (MA-CDFRFT) for the purposes of cochannel FM demodulation and also investigate its use for the demodulation of cochannel continuous phase modulation (CPM) signals used frequently in wireless systems, using rectangular, triangular, or trapezoidal pulse shapes. Simulation results demonstrate that the approach is able to accomplish cochannel signal separation and demodulation, where existing multicomponent AM-FM demodulation algorithms fail. It is further demonstrated that for cochannel CPM demodulation, symbol error probabilities that are comparable to or smaller than that of coherent BPSK detection in additive white Gaussian noise.
- 1 January 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 535-539
Cochannel FM Demodulation via the Multi Angle-Centered Discrete Fractional Fourier Transform
The problem of demodulating multiple frequency modulated signals that overlap spectrally is seen to pervade communication systems both military and civilian, where bandwidth is a precious resource. In this paper, we extend the use of the recently developed multiangle discrete fractional Fourier transform (MA-CDFRFT) for the purposes of cochannel FM demodulation and also investigate its use for the demodulation of cochannel continuous phase modulation (CPM) signals used frequently in wireless systems, using rectangular, triangular, or trapezoidal pulse shapes. Simulation results demonstrate that the approach is able to accomplish cochannel signal separation and demodulation, where existing multicomponent AM-FM demodulation algorithms fail. It is further demonstrated that for cochannel CPM demodulation, symbol error probabilities that are comparable to or smaller than that of coherent BPSK detection in additive white Gaussian noise.
- 3 October 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 46 (10) , 3346-3358
Canonical Correlation Feature Selection for Sensors With Overlapping Bands: Theory and Application
The main focus of this paper is a rigorous development and validation of a novel canonical correlation feature- selection (CCFS) algorithm that is particularly well suited for spectral sensors with overlapping and noisy bands. The proposed approach combines a generalized canonical correlation analysis framework and a minimum mean-square-error criterion for the selection of feature subspaces. The latter induces ranking of the best linear combinations of the noisy overlapping bands and, in doing so, guarantees a minimal generalized distance between the centers of classes and their respective reconstructions in the space spanned by sensor bands. To demonstrate the efficacy and the scope of the proposed approach, two different applications are considered. The first one is separability and classification analysis of rock species using laboratory spectral data and a quantum-dot infrared photodetector (QDIP) sensor. The second application deals with supervised classification and spectral unmixing, and abundance estimation of hyperspectral imagery obtained from the Airborne Hyperspectral Imager sensor. Since QDIP bands exhibit significant spectral overlap, the first study validates the new algorithm in this important application context. The results demonstrate that proper postprocessing can facilitate the emergence of QDIP-based sensors as a promising technology for midwave- and longwave-infrared remote sensing and spectral imaging. In particular, the proposed CCFS algorithm makes it possible to exploit the unique advantage offered by QDIPs with a dot-in-a-well configuration, comprising their bias-dependent spectral response, which is attributable to the quantum Stark effect. The main objective of the second study is to assert that the scope of the new CCFS approach also extends to more traditional spectral sensors.
- 3 October 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 46 (10) , 3346-3358
Canonical Correlation Feature Selection for Sensors With Overlapping Bands: Theory and Application
The main focus of this paper is a rigorous development and validation of a novel canonical correlation feature- selection (CCFS) algorithm that is particularly well suited for spectral sensors with overlapping and noisy bands. The proposed approach combines a generalized canonical correlation analysis framework and a minimum mean-square-error criterion for the selection of feature subspaces. The latter induces ranking of the best linear combinations of the noisy overlapping bands and, in doing so, guarantees a minimal generalized distance between the centers of classes and their respective reconstructions in the space spanned by sensor bands. To demonstrate the efficacy and the scope of the proposed approach, two different applications are considered. The first one is separability and classification analysis of rock species using laboratory spectral data and a quantum-dot infrared photodetector (QDIP) sensor. The second application deals with supervised classification and spectral unmixing, and abundance estimation of hyperspectral imagery obtained from the Airborne Hyperspectral Imager sensor. Since QDIP bands exhibit significant spectral overlap, the first study validates the new algorithm in this important application context. The results demonstrate that proper postprocessing can facilitate the emergence of QDIP-based sensors as a promising technology for midwave- and longwave-infrared remote sensing and spectral imaging. In particular, the proposed CCFS algorithm makes it possible to exploit the unique advantage offered by QDIPs with a dot-in-a-well configuration, comprising their bias-dependent spectral response, which is attributable to the quantum Stark effect. The main objective of the second study is to assert that the scope of the new CCFS approach also extends to more traditional spectral sensors.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, III-1261-III-1264
A Regeneration-Based Approach for Resource Allocation in Cooperative Distributed Systems
A regeneration-based approach is undertaken to derive an expression for the expected value of total service time for an arbitrary customer distribution when scheduling is performed in a distributed queuing system. The service times and the transfer delays for customers in the shared communication medium are both considered random. The theory is applied to a distributed wireless-sensor network and the interplay between the total service time and the energy consumption of each sensor is investigated.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 3, III-1261-III-1264
A Regeneration-Based Approach for Resource Allocation in Cooperative Distributed Systems
A regeneration-based approach is undertaken to derive an expression for the expected value of total service time for an arbitrary customer distribution when scheduling is performed in a distributed queuing system. The service times and the transfer delays for customers in the shared communication medium are both considered random. The theory is applied to a distributed wireless-sensor network and the interplay between the total service time and the energy consumption of each sensor is investigated.
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 418-422
Multicomponent Chirp Demodulation using Discrete Fractional Fourier Analysis
The multicomponent chirp model finds numerous applications in biomedical signal processing, radar problems, and in the modeling of biological waveforms such as bat and whale echolocation signals. The problem of demodulating these signals is straight-forward when the components are distinct, however, when the components overlap spectrally or when one of the components is stronger than the others existing multicomponent demodulation algorithms run into singularity problems and are unable to effect signal separation and demodulation. In this paper, we present a method of multicomponent chirp demodulation using the recently introduced multiangle-centered discrete fractional Fourier transform. We specifically demonstrate that the proposed algorithm is effective in the aforementioned difficult situations where other algorithms fail
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 418-422
Multicomponent Chirp Demodulation using Discrete Fractional Fourier Analysis
The multicomponent chirp model finds numerous applications in biomedical signal processing, radar problems, and in the modeling of biological waveforms such as bat and whale echolocation signals. The problem of demodulating these signals is straight-forward when the components are distinct, however, when the components overlap spectrally or when one of the components is stronger than the others existing multicomponent demodulation algorithms run into singularity problems and are unable to effect signal separation and demodulation. In this paper, we present a method of multicomponent chirp demodulation using the recently introduced multiangle-centered discrete fractional Fourier transform. We specifically demonstrate that the proposed algorithm is effective in the aforementioned difficult situations where other algorithms fail
- 1 February 2005
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 22 (2) , 239-249
Generalized algebraic scene-based nonuniformity correction algorithm
A generalization of a recently developed algebraic scene-based nonuniformity correction algorithm for focal plane array (FPA) sensors is presented. The new technique uses pairs of image frames exhibiting arbitrary one- or two-dimensional translational motion to compute compensator quantities that are then used to remove nonuniformity in the bias of the FPA response. Unlike its predecessor, the generalization does not require the use of either a blackbody calibration target or a shutter. The algorithm has a low computational overhead, lending itself to real-time hardware implementation. The high-quality correction ability of this technique is demonstrated through application to real IR data from both cooled and uncooled infrared FPAs. A theoretical and experimental error analysis is performed to study the accuracy of the bias compensator estimates in the presence of two main sources of error.
- 1 February 2005
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 22 (2) , 239-249
Generalized algebraic scene-based nonuniformity correction algorithm
A generalization of a recently developed algebraic scene-based nonuniformity correction algorithm for focal plane array (FPA) sensors is presented. The new technique uses pairs of image frames exhibiting arbitrary one- or two-dimensional translational motion to compute compensator quantities that are then used to remove nonuniformity in the bias of the FPA response. Unlike its predecessor, the generalization does not require the use of either a blackbody calibration target or a shutter. The algorithm has a low computational overhead, lending itself to real-time hardware implementation. The high-quality correction ability of this technique is demonstrated through application to real IR data from both cooled and uncooled infrared FPAs. A theoretical and experimental error analysis is performed to study the accuracy of the bias compensator estimates in the presence of two main sources of error.