Metin Sitti

Existing remotely actuated magnetic microrobots exhibit a maximum of only five-degree-of-freedom (DOF) actuation, as creation of a driving torque about the microrobot magnetization axis is not achievable. This lack of full orientation control limits the effectiveness of existing microrobots for precision tasks of object manipulation and orientation for advanced medical, biological and micromanufacturing applications. This paper presents a magnetic actuation method that allows remotely powered microrobots to achieve full six-DOF actuation by considering the case of a non-uniform magnetization profile within the microrobot body. This non-uniform magnetization allows for additional rigid-body torques to be induced from magnetic forces via a moment arm. A general analytical model presents the working principle for continuous and discrete magnetization profiles, which is applied to permanent or non-permanent (soft) magnet bodies. Several discrete-magnetization designs are also presented which possess reduced coupling between magnetic forces and induced rigid-body torques. Design guidelines are introduced which can be followed to ensure that a magnetic microrobot design is capable of six-DOF actuation. A simple permanent-magnet prototype is fabricated and used to quantitatively demonstrate the accuracy of the analytical model in a constrained-DOF environment and qualitatively for free motion in a viscous liquid three-dimensional environment. Results show that desired forces and torques can be created with high precision and limited parasitic actuation, allowing for full six-DOF actuation using limited feedback control.

Contact self-cleaning of gecko-inspired synthetic adhesives with mushroom-shaped tips has been demonstrated recently using load–drag–unload cleaning procedures similar to that of the natural animal. However, the underlying mechanics of contact cleaning has yet to be fully understood. In this work, we present a detailed experiment of contact self-cleaning that shows that rolling is the dominant mechanism of cleaning for spherical microparticle contaminants, during the load–drag–unload procedure. We also study the effect of dragging rate and normal load on the particle rolling friction. A model of spherical particle rolling on an elastomer fibrillar adhesive interface is developed and agrees well with the experimental results. This study takes us closer to determining design parameters for achieving self-cleaning fibrillar adhesives.

This paper presents the design, development, and verification of a miniature integrated jumping and gliding robot, the MultiMo-Bat, which is inspired by the locomotion strategy of vampire bats. This 115.6 g robot exhibits high jumping and gliding performance, reaching heights of over 3 m, to overcome obstacles in the environment. The MultiMo-Bat was developed by a novel integrated design strategy that combines jumping and gliding locomotion modes and minimizes the necessary actuation and structural components by sharing a significant portion of the components required for each mode; nearly 70% of the total robot mass is utilized by both modes. This results in overall low mass, low volume, and high co-operation between the modes which allows for the preservation of over 80% of the performance of the independent jumping locomotion mode when combined. This not only allows for two high-performance locomotion modes, but also for all of the necessary actuation components to be on board. Key considerations and components of the design are discussed in the context of the integrated design approach. A prototype of the system is constructed and experimentally tested in various configurations to elucidate the overall system and integration performance. Finally, metrics are developed to begin to quantify the level and performance of the integrated approach as well as allow it to be compared to other mechanical and biological systems. This type of jumping and gliding robot can be used to explore, inspect, and monitor unstructured environments for security and environment monitoring applications.

Bio-hybrid devices, which integrate biological cells with synthetic components, have opened a new path in miniaturized systems with the potential to provide actuation and control for systems down to a few microns in size. Here, we address the challenge of remotely controlling bio-hybrid microswimmers propelled by multiple bacterial cells. These devices have been proposed as a viable method for targeted drug delivery but have also been shown to exhibit stochastic motion. We demonstrate a method of remote magnetic control that significantly reduces the stochasticity of the motion, enabling steering control. The demonstrated microswimmers consist of multiple Serratia marcescens (S. marcescens) bacteria attached to a 6 μm-diameter superparamagnetic bead. We characterize their motion and define the parameters governing their controllability. We show that the microswimmers can be controlled along two-dimensional (2-D) trajectories using weak magnetic fields (≤10 mT) and can achieve 2-D swimming speeds up to 7.3 μm s⁻¹. This magnetic steering approach can be integrated with sensory-based steering in future work, enabling new control strategies for bio-hybrid microsystems.

As we move towards the miniaturization of devices to perform tasks at the nano and microscale, it has become increasingly important to develop new methods for actuation, sensing, and control. Over the past decade, bio‐hybrid methods have been investigated as a promising new approach to overcome the challenges of scaling down robotic and other functional devices. These methods integrate biological cells with artificial components and therefore, can take advantage of the intrinsic actuation and sensing functionalities of biological cells. Here, the recent advancements in bio‐hybrid actuation are reviewed, and the challenges associated with the design, fabrication, and control of bio‐hybrid microsystems are discussed. As a case study, focus is put on the development of bacteria‐driven microswimmers, which has been investigated as a targeted drug delivery carrier. Finally, a future outlook for the development of these systems is provided. The continued integration of biological and artificial components is envisioned to enable the performance of tasks at a smaller and smaller scale in the future, leading to the parallel and distributed operation of functional systems at the microscale.

The adhesive characteristics of fibrillar adhesives on a soft deformable membrane are reported. A soft gripper with an inflatable membrane covered by elastomer mushroom-shaped microfibers have a superior conformation to non-planar 3D part geometries, enabling the transfer printing of various parts serially or in parallel.

This paper proposes a self-assembling soft modular matter, called SoftCubes, where soft-bodied modules are disassembled into a flexible string by an external tension and self-assemble into the preprogrammed three-dimensional (3D) shape. The developed soft modular matter has three main design features. Firstly, entire modules of the 3D shape are serially connected. Such a structure allows all the modules to be disassembled by external tension. Secondly, the outer body of the modules and the connecting parts are made of soft stretchable elastomer. Due to the soft body of the modules, after disassembling, the serially connected modules become a highly flexible and soft string, and have an extreme shape adaptation capability. Also, if the external tension is removed, the preprogrammed 3D shape is recovered by the elastic restoring force of soft-bodied modules. Finally, embedded small permanent magnets induce magnetic self-assembling forces and maintain a mechanical robustness of the 3D shape of module assembly. Due to the magnetic self-assembly, the soft modules are precisely aligned with neighboring modules in a lattice structure. The paper also presents an algorithm to generate the serial connection path of modules for creating a given 3D shape. Various physical interactions between self-assembling module prototypes are visualized in two-dimensional motion tracking experiments. Finally, the shape reconfiguration ability of soft modular matter is demonstrated. SoftCubes is a new class of programmable modular matter where shape memory ability is embedded in the structure, and shows a physical implementation of various 3D shapes with a high resolution and a high scalability.

The exceptionally adhesive foot of the gecko remains clean in dirty environments by shedding contaminants with each step. Synthetic gecko-inspired adhesives have achieved similar attachment strengths to the gecko on smooth surfaces, but the process of contact self-cleaning has yet to be effectively demonstrated. Here, we present the first gecko-inspired adhesive that has matched both the attachment strength and the contact self-cleaning performance of the gecko's foot on a smooth surface. Contact self-cleaning experiments were performed with three different sizes of mushroom-shaped elastomer microfibres and five different sizes of spherical silica contaminants. Using a load–drag–unload dry contact cleaning process similar to the loads acting on the gecko foot during locomotion, our fully contaminated synthetic gecko adhesives could recover lost adhesion at a rate comparable to that of the gecko. We observed that the relative size of contaminants to the characteristic size of the microfibres in the synthetic adhesive strongly determined how and to what degree the adhesive recovered from contamination. Our approximate model and experimental results show that the dominant mechanism of contact self-cleaning is particle rolling during the drag process. Embedding of particles between adjacent fibres was observed for particles with diameter smaller than the fibre tips, and further studied as a temporary cleaning mechanism. By incorporating contact self-cleaning capabilities, real-world applications of synthetic gecko adhesives, such as reusable tapes, clothing closures and medical adhesives, would become feasible.

Mobile sub‐millimeter micro‐robots have demonstrated untethered motion and transport of cargo in remote, confined or enclosed environments. However, limited by simple design and actuation, they lack remotely‐actuated on‐board mechanisms required to perform complex tasks such as object assembly. A flexible patterned magnetic material which allows internal actuation, resulting in a mobile micro‐gripper which is driven and actuated by magnetic fields, is introduced here. By remotely controlling the magnetization direction of each micro‐gripper arm, a gripping motion which can be combined with locomotion for precise transport, orientation, and programmable three‐dimensional assembly of micro‐parts in remote environments is demonstrated. This allows the creation of out‐of‐plane 3D structures and mechanisms made from several building blocks. Using multiple magnetic materials in each micro‐gripper, the addressable actuation of gripper teams for parallel, distributed operation is also demonstrated. These mobile micro‐grippers can potentially be applied to 3D assembly of heterogeneous meta‐materials, construction of medical devices inside the human body, the study of biological systems in micro‐fluidic channels, 3D micro‐device prototyping or desktop micro‐factories.