Gary P. Gibbs
Gary P. Gibbs has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Robert L. Clark
University of Rochester, Rochester, NY
5 shared publications - Joseph D. Sprofera
Pratt School of Engineering, Duke University, Durham, North Carolina 27708, USA
3 shared publications - Randolph H. Cabell
NASA Langley Research Center, Structural Acoustics Branch , Hampton, Virginia 23681
3 shared publications Chris R. Fuller
Mechanical Engineering Department, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061
1 shared publicationDaniel L. Palumbo
Structural Acoust. Branch, NASA LaRC, Hampton, VA 23681
1 shared publicationDavid E. Cox
NASA Langley Research Center, Hampton, Virginia 23681-0001
1 shared publication
Latest Publications
- 1 July 2007
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 122 (1) , 271-279
Structural acoustic control of plates with variable boundary conditions: Design methodology
A method for optimizing a structural acoustic control system subject to variations in plate boundary conditions is provided. The assumed modes method is used to build a plate model with varying levels of rotational boundary stiffness to simulate the dynamics of a plate with uncertain edge conditions. A transducer placement scoring process, involving Hankel singular values, is combined with a genetic optimization routine to find spatial locations robust to boundary condition variation. Predicted frequency response characteristics are examined, and theoretically optimized results are discussed in relation to the range of boundary conditions investigated. Modeled results indicate that it is possible to minimize the impact of uncertain boundary conditions in active structural acoustic control by optimizing the placement of transducers with respect to those uncertainties.
- 1 July 2007
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 122 (1) , 271-279
Structural acoustic control of plates with variable boundary conditions: Design methodology
A method for optimizing a structural acoustic control system subject to variations in plate boundary conditions is provided. The assumed modes method is used to build a plate model with varying levels of rotational boundary stiffness to simulate the dynamics of a plate with uncertain edge conditions. A transducer placement scoring process, involving Hankel singular values, is combined with a genetic optimization routine to find spatial locations robust to boundary condition variation. Predicted frequency response characteristics are examined, and theoretically optimized results are discussed in relation to the range of boundary conditions investigated. Modeled results indicate that it is possible to minimize the impact of uncertain boundary conditions in active structural acoustic control by optimizing the placement of transducers with respect to those uncertainties.
- 1 April 2005
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 117 (4_Suppleme) , 2601-2602
Structural acoustic control of plates with variable boundary conditions
- 1 April 2005
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 117 (4_Suppleme) , 2601-2602
Structural acoustic control of plates with variable boundary conditions
- 1 October 2003
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 114 (4_Suppleme) , 2391
Transducer placement for robustness to variations in boundary conditions for active structural acoustic control
- 1 October 2003
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 114 (4_Suppleme) , 2391
Transducer placement for robustness to variations in boundary conditions for active structural acoustic control
- 25 October 2002
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 112 (5_Suppleme) , 2346
Recent advances in active noise and vibration control at NASA Langley Research Center
- 25 October 2002
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 112 (5_Suppleme) , 2346
Recent advances in active noise and vibration control at NASA Langley Research Center
- 1 February 2001
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 109 (2) , 443-444
Adaptive Structures: Dynamics and Control
- 1 February 2001
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 109 (2) , 443-444
Adaptive Structures: Dynamics and Control
- 1 January 2000
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 107 (1) , 332-339
Radiation modal expansion: Application to active structural acoustic control
This paper demonstrates active structural acoustic control using multiple input/output adaptive sensoriactuators combined with radiation filters and a feedback control paradigm. A new method of reduced order modeling/design of radiation filters termed radiation modal expansion (RME) is presented. For the experiments detailed in this paper, the RME technique reduced the modeling of the radiation matrix from 400 transfer functions to 6 transfer functions (multiplied by a constant transformation matrix). Experimental results demonstrate reductions of radiated sound power on the order of 5 dB over the bandwidth of 0-800 Hz.
- 1 January 2000
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 107 (1) , 332-339
Radiation modal expansion: Application to active structural acoustic control
This paper demonstrates active structural acoustic control using multiple input/output adaptive sensoriactuators combined with radiation filters and a feedback control paradigm. A new method of reduced order modeling/design of radiation filters termed radiation modal expansion (RME) is presented. For the experiments detailed in this paper, the RME technique reduced the modeling of the radiation matrix from 400 transfer functions to 6 transfer functions (multiplied by a constant transformation matrix). Experimental results demonstrate reductions of radiated sound power on the order of 5 dB over the bandwidth of 0-800 Hz.
- 1 June 1993
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 93 (6) , 3258-3264
An experimental study implementing model reference active structural acoustic control
Model reference active structural acousticcontrol is experimentally investigated in this study for physical systems characterized by stationary, narrow‐band disturbances in which the acoustic field remains relatively unchanged. The filtered‐x version of the multichannel adaptive least‐mean‐square (LMS) algorithm was implemented on a TMS320C25 digital signal processing board to achieve the desired control approach, and control inputs were generated with piezoelectric actuators. Model reference control provides the designer with a method of replacing acoustic error sensors such as microphones located in the far‐field with error sensors such as accelerometers located on the surface of the structure. As opposed to driving the response of the structure to zero at the coordinates of the accelerometers, the response is driven to some predetermined ‘‘reference’’ value corresponding to the desired far‐field acoustic directivity pattern. In essence, the uncontrolled structure is adaptively modified to behave like the reference structure under acoustic control conditions. Results from this study indicate that the same acoustic directivity pattern can be achieved with model reference control, and the only requirement is that the number of structuralsensors used in the control approach is at least equal to the number of control actuators required to achieve the desired acoustic directivity pattern.
- 1 June 1993
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 93 (6) , 3258-3264
An experimental study implementing model reference active structural acoustic control
Model reference active structural acousticcontrol is experimentally investigated in this study for physical systems characterized by stationary, narrow‐band disturbances in which the acoustic field remains relatively unchanged. The filtered‐x version of the multichannel adaptive least‐mean‐square (LMS) algorithm was implemented on a TMS320C25 digital signal processing board to achieve the desired control approach, and control inputs were generated with piezoelectric actuators. Model reference control provides the designer with a method of replacing acoustic error sensors such as microphones located in the far‐field with error sensors such as accelerometers located on the surface of the structure. As opposed to driving the response of the structure to zero at the coordinates of the accelerometers, the response is driven to some predetermined ‘‘reference’’ value corresponding to the desired far‐field acoustic directivity pattern. In essence, the uncontrolled structure is adaptively modified to behave like the reference structure under acoustic control conditions. Results from this study indicate that the same acoustic directivity pattern can be achieved with model reference control, and the only requirement is that the number of structuralsensors used in the control approach is at least equal to the number of control actuators required to achieve the desired acoustic directivity pattern.