GPGopu R. Potty

Gopu R. Potty

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gopu R. Potty has a total of 80 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Characteristics of the soundscape before and after the construction of the Block Island Wind Farm

    by Aditi Tripathy, James H Miller, Gopu R. Potty, Jennifer Amaral, Kathleen J. Vigness-Raposa, Adam S. Frankel, Ying-Tsong Lin, Arthur Newhall

    The Block Island Wind Farm (BIWF) south of Rhode Island is the first offshore windfarm in the United States. As part of the Ocean Special Area Management Plan, acoustic data were collected before the construction in the fall of 2009. Noise budgets were estimated based on this data and showed the dominant sources of sound in a 1/3-octave band centered at 500 Hz were shipping and wind. Data were again collected during and after construction of the wind farm and will be presented and compared to pre-construction levels. In 2009, Passive Aquatic Listener (PALs) were deployed. After construction was complete, data from a tetrahedral hydrophone array (~50 m from one of the wind turbines) were analyzed to study the soundscape from December 20, 2016 to January 14, 2017. The acoustic environment near the BIWF after construction showed contributions from shipping, wind, and marine life. Noise from the wind turbine was measured near 70 Hz at approximately 100 dB re 1 mPa at a range of 50 m. Significant marine mammal vocalizations were recorded including from humpback and fin whales. (Work supported by the Bureau of Ocean Energy Management.)

  • Measurements of modal attenuation using broadband sources in the New England Mud Patch

    by Kerry Unrein, Gopu R. Potty, James H. Miller, Dag Tollefsen, David P. Knobles, Preston S. Wilson, Ying-Tsong Lin

    Measurements of underwater acoustic signals were made on a bottom-mounted horizontal line array during the Seabed Characterization Experiment (SCEx) in the New England Mud Patch south of Martha’s Vineyard in about 70 meters of water. The signals were generated by SUS (Signals, Underwater Sound) charges detonated at various locations in the experimental area at a depth of 18 m, during nearly-isovelocity conditions. The broadband signals were analyzed for modal arrival time and amplitude using time-frequency techniques. Ratios of modal amplitudes at the different hydrophones were used to estimate the modal attenuation coefficients. Hence, these estimates are independent of any uncertainty in the frequency-dependent source level of the SUS charges. These coefficients are directly related to the depth-dependent sediment attenuation profile. A sensitivity study was performed to understand how the modes sample the different layers and provides estimates of resolution kernels. Posteriori error analysis provides averages and standard deviations for the estimate of sediment attenuation as function of depth. The frequency bands of interest range from 10 Hz to 200 Hz for modes 1 to 4. We will compare our estimates of sediment attenuation with historical measurements. [Work supported by Office of Naval Research.]

  • Finite element modeling of Rayleigh wave propagation in a laboratory sand tank

    by Anthony F. Ragusa, James H. Miller, Gopu R. Potty

    Rayleigh waves were measured in a laboratory sand tank using an array of accelerometers. This tank allows for the measurement of interface waves for various sediment and soil arrangements in a well-controlled laboratory setting. Rayleigh waves were excited by simple impulsive sources including dropped balls and hammer impacts. In this study, a finite element modeling tool developed by Sandia National Laboratories was used to simulate the sand tank during these excitations. Different modeling scenarios were investigated. Time series of the Rayleigh wave arrivals were modeled at the sensor locations using time domain analysis. A calibrated bender element system was also developed to provide direct measurements of the shear wave speed profile at selected depths. These data were used to develop the material property input parameters for the finite element analysis. The simulated time series at the sensor locations are compared to the accelerometer data. [Work supported by Army Research Laboratory and BOEM.]

  • Measurements of underwater sound radiated from an offshore wind turbine

    by James H Miller, Gopu R. Potty, Ying-Tsong Lin, Arthur Newhall, Kathleen J. Vigness-Raposa, Jennifer Giard, Tim Mason

    Underwater acoustic and geophysical systems were deployed to monitor the operation of the Block Island Wind Farm (BIWF). The BIWF consists of five GE Haliade 150-6MW wind turbines each with 150 m diameter blades. The five wind turbines were laid out about 1 km apart in a southwest-to-northeast arc. Each turbine is equipped with a direct drive permanent magnet generator, with no gearbox coupled to the generator. These turbines are variable speed and have independent pitch control by blade. The equipment used to monitor the BIWF operation consisted of a towed array of eight hydrophones, two VLAs with four hydrophones each and a fixed sensor package for measuring particle velocity. This sensor package consists of a three-axis geophone on the seabed and a tetrahedral array of four hydrophones at 1 m from the bottom. Additionally, an acoustic vector sensor was deployed in mid-water. During operations in December 2016, an acoustic signal was detected by the tetrahedral array of hydrophones at a position 50 meters west of the southwestern-most turbine. The frequency of this signal was approximately 72 Hz and the rms sound pressure level was about 100 dB re 1 micropascal. [Work supported by Bureau of Ocean Energy Management (BOEM).]

  • Preliminary analysis of geophone and tetrahedral array data from the Seabed Characterization Experiment

    by Poonam Aggarwal, Nipun Aggarwal, Gopu R. Potty, James H Miller, Ying-Tsong Lin, Arthur Newhall

    As part of the Seabed Characterization Experiment (SCEx), the University of Rhode Island and Wood Hole Oceanographic Institution deployed the low frequency shear measurement system and the interface Wave Sediment Profiler (iWaSP) system in the New England Mud Patch south of Cape Cod in about 70 meters of water. Multiple sensors were utilized to collect data which include a geosled with a geophone array of four vertically gimbaled geophones and a tetrahedral array of four hydrophones. The iWasp was used for exciting the interface waves. The iWaSP system was deployed from the R/V Sharp and it transmitted 10 seconds chirp signals every one minute between 33 and 200 Hz. The geophone array was approximately 100 m from the iWaSP source. Detection of the chirps from geophone and tetrahedral array signals was challenging due to the presence of noise sources such as ship traffic and environmental noise. Data were explored for the presence of iWaSP chirp signals in the audio and further analyzed using techniques such as matched filtering. The preliminary results and initial hypothesis regarding the wave types corresponding to the multiple arrivals will be presented. [Work supported by Office of Naval Research.]

  • Asymptotic stepwise coupled modes for horizontally-variable acoustic media

    by Charles E. White, Cathy Ann Clark, Gopu R. Potty, James H Miller

    Efficient and accurate mathematical codes for the prediction of underwater sound propagation are a critical component of SONAR system development and operation. The goal of the research presented herein is to develop, implement, and verify an efficient and rigorous coupled-mode solution for acoustic wave propagation in shallow water range-dependent environments. A theoretical framework involving a range-expanded inner product for capturing the coupling between modes as they propagate through a horizontally-variable medium is presented. This framework includes a novel discretization of the range-dependent acoustic medium. A difference equations approach, which implements the inner product to account for non-adiabatic energy transfer between modes, is used to recursively compute reflection and transmission coefficients throughout the discretized environment. Increased efficiency is gained in the method due to the ability to compute coupling via closed-form algebraic expressions and in the application of asymptotic analysis to simplify the transmission and reflection coefficients. Results will be shown for a sample of waveguides with horizontally-variable bottom depth, along with comparable results from R. Evans’ COUPLE model and an FEM solution produced by ARL-UT. [This work was funded by the Naval Undersea Warfare Center, Newport Rhode Island.]

  • A preliminary numerical model of three-dimensional underwater sound propagation in the Block Island Wind Farm area

    by Ying-Tsong Lin, Arthur Newhall, Gopu R. Potty, James H Miller

    The Block Island Wind Farm, consisting of five 6-MW turbines, is the first U.S. commercial offshore wind farm harvesting wind energy to generate electricity, located 3.8 miles southeast of Block Island, Rhode Island. In-situ underwater and airborne noise measurements were made during the construction and the first two months of the operational period for the purpose of environmental impact assessment. To better interpret the noise measurements and extend the noise propagation prediction beyond the coverage of listening stations, a three-dimensional underwater sound propagation model is created with a high resolution bathymetric map and a data-assimilated ocean dynamic model. The bathymetric map is made using the 3 arc-second U.S. Coastal Relief Model (CRM) with a 100-m horizontal resolution provided by the National Centers for Environmental Information (NCEI). The ocean model is extracted from the Regional Ocean Modeling System (ROMS) ESPreSSO (Experimental System for Predicting Shelf and Slope Optics) model covering the Mid-Atlantic Bight with a 5 km horizontal resolution and 36 terrain-following vertical levels. Temporal and spatial variability of noise propagation conditions is identified in the integrated acoustic and oceanographic model. Future model development incorporating surface wind waves and sub-bottom sediment layer structure will be discussed. [Work supported by BOEM.]


  • Variations in the acoustic field recorded during pile-driving construction of the Block Island Wind Farm

    by Kathleen J. Vigness-Raposa, Jennifer Giard, Adam S. Frankel, James H Miller, Gopu R. Potty, Ying-Tsong Lin, Arthur Newhall, Tim Mason

    The Block Island Wind Farm, the first offshore wind farm in the United States, consists of five 6-MW turbines three miles southeast of Block Island, Rhode Island in water depths of approximately 30 m. The turbines include a jacket-type substructure with four piles driven at an angle of approximately 13 deg to the vertical to pin the structure to the seabed. The acoustic field was measured during pile driving of two turbines in September 2015 with an 8-element towed horizontal line array. Measurements began at a range of 1 km from the turbine on which piling was occurring and extended to a range of 8 km from the construction. The peak-to-peak received level, sound exposure level, and kurtosis from each pile strike were determined as a function of range from the pile. The ambient noise just prior to each signal was also measured to calculate signal-to-noise ratio values. Results provide insight into the transition from fast-rise-time impulsive signals at close range to slow-rise-time non-impulsive signals at longer ranges. In addition, the variability among signals at the same range is being characterized as a function of pile and hammer strike characteristics. [Work supported by Bureau of Ocean Energy Management (BOEM).]

  • Overview of underwater acoustic and seismic measurements of the construction and operation of the Block Island Wind Farm

    by James H Miller, Gopu R. Potty, Ying-Tsong Lin, Arthur Newhall, Kathleen J. Vigness-Raposa, Jennifer Giard, Tim Mason

    The Block Island Wind Farm (BIWF), the first offshore wind farm in the United States, consists of five 6-MW turbines 3 miles southeast of Block Island, Rhode Island in water depths of approximately 30 m. Construction began in the summer of 2015 and power production began in late 2016. Underwater acoustic and geophysical measurement systems were deployed to acquire real-time observations of the construction and initial operation of a wind facility to aid the evaluation of environmental effects of future facilities. The substructure for these BIWF turbines consists of jacket type construction with piles driven to the bottom to pin the structure to the seabed. The equipment used to monitor construction and initial operation consisted of a towed array consisting of eight hydrophones, two fixed moorings with four hydrophones each and a fixed sensor package for measuring particle velocity. This sensor package consists of a three-axis geophone on the seabed and a tetrahedral array of four low sensitivity hydrophones at 1 m from the bottom. Additionally, an acoustic vector sensor was deployed in mid-water. Data collected on these sensor systems during construction and initial operation will be summarized. [Work supported by Bureau of Ocean Energy Management (BOEM).]


  • Analysis of fin whale vocalizations south of Rhode Island

    by Jennifer Giard, James H. Miller, Gopu R. Potty, Arthur Newhall, Ying-Tsong Lin, Mark F. Baumgartner

    Fin whale vocalizations were recorded south of Rhode Island during late summer through early fall of 2015 using a number of underwater recording systems. These systems were deployed to monitor broadband noise, including pile driving, from construction of the Block Island Wind Farm. Two vertical hydrophone array moorings were deployed in approximately 40 m of water each with four hydrophones. Additionally, a tetrahedral array was deployed in about 30 m of water just above the seabed. The tetrahedral array consisted of four hydrophones spaced 0.5 m apart. The spacing between each of these recording systems was approximately 7.5 km. 20-Hz fin whale vocalizations were recorded numerous times on all of the sensors both during and after construction was completed. An analysis and localization effort of these signals was performed to estimate the source level, directionality and the track of the whale over the period of the vocalizations. The results of this analysis will be discussed. [Work supported by the BOEM.]