TGThierry Gauthier

Thierry Gauthier

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Thierry Gauthier has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Reactivity study of Athabasca vacuum residue in hydroconversion conditions

    by P. Danial-Fortain, T. Gauthier, I. Merdrignac, H. Budzinski


  • A Review of Rapid Gas-Solid Separation Techniques

    by Martin Huard, Cedric Briens, Franco Berruti, Thierry A Gauthier

    Rapid, effective separation of phases is an essential step in many hydrocarbon conversion gas-solid processes. In heavy oil upgrading, fluid catalytic cracking (FCC) and biomass pyrolysis, for example, very fast separation of reacting gases from catalytic or heat-bearing solids is required to inhibit further reaction. The primary functions of a rapid separator in the context of a gas-solid flow are, first, to terminate contact between the reacting gases and the catalytic or hot solid particles and, second, to recover the isolated product vapors. Uninterrupted vapor-solid contact results in degraded, overcracked and generally less valuable products. Increasing interest in rapid separation has led in the past 25 years to a wide variety of proposed separator designs in the literature.Centrifugal separation is the fundamental principle underlying cyclone operation and most rapid gas-solid separation processes. Traditional cyclones rely on centrifugal separation and are very widely applicable. They are used for the removal of solid particulate matter from gas or liquid streams, for gas demisting, and in hydrocyclones. Most FCC processes employ traditional cyclone configurations for secondary and tertiary separation. The review briefly summarizes important topics studied in reverse flow cyclone operation. For initial separation, however, most fast gas-solid separators in the literature feature only partial cyclone layouts. Separation typically occurs more quickly in these devices relative to traditional cyclones, likely at the expense of separation efficiency.The current review places emphasis on experimental results and novel separation techniques in the context of fast gas-solid separation. Several recent methods of rapid gas-solid separation employ co-current or "uniflow" centrifugal arrangements. Hence, particular attention is directed to co-current centrifugal separators. These devices have been studied much less intensively than their reverse flow counterparts. Fast co-current separators, with their novel, partial cyclone layouts, are interesting for their performance characteristics in relation to popular commercial designs.


  • Current R&D Challenges for Fluidized Bed Processes in the Refining Industry

    by Thierry A Gauthier

    Fluidized bed processes are widely used in the refining industry, mostly for conversion applications (e.g. fluid catalytic cracking, fluid coking, residue hydroconversion, Fischer-Tropsch Synthesis, etc.). These are large scale processes operating under severe conditions. Fluidized bed processes involve many complex phenomena that need to be considered in order to ensure proper design, operation and reliability. There have been thousands of publications over many years in the field of fluidization, but some of the fundamentals of fluid-particle flows still remain to be clarified. As a consequence, scale-up and industrialization of new technologies or processes remain a difficult, challenging and risky task.IFP is deeply involved with fluidized bed processes used in the refining industry. Over the last twenty years, industrial developments and PhD studies were conducted to explore new concepts, to develop new technologies, to scale-up hydrodynamics, to understand and quantify key phenomena. This paper discusses R&D practices in the field and current challenges encountered, mostly based on IFP experience. It does not intend, however, to provide an extensive literature review of all topics addressed in this paper.Interactions between particles, multiphase flow and reactor geometries are complex issues in fluidized beds. Therefore, experimentation is required to study new concepts such as downflow systems, complex phenomena such as vaporization of droplets in contact with gas-particle systems. The design of the experiment and the development of appropriate instrumentation are never simple and in the absence of simple similarities, anticipation of the main flow features is unavoidable. Modeling of results is then mandatory in order to translate results to industrial perspectives. Over the last 15 years, CFD has appeared as a promising tool to describe multiphase flow phenomena in complex geometries. Unfortunately, the lack of theoretical models to describe gas particle flow, at least for Group A powders, still leads researchers to conduct experiments to validate simulations or to adjust the gas-particle closure equations to validate results. Furthermore, observation in industrial units, during start-up or under steady conditions, when possible, greatly aids in validating research efforts and methodology.Despite its maturity, our industry is moving forward. There are ongoing developments in the energy and fuels market as well as in environmental fields, but also in the scientific background available to describe multiphase flow. Therefore, evolutionary R&D in the field is still needed to progress in the description of complex phenomena in order to optimize reactors and technologies and to face the changes of our industry.


  • Open Access

    Scale Up of Slurry Bubble Reactors

    by A. Forret, J. M. Schweitzer, T. Gauthier, R. Krishna, D. Schweich

    Searching for the source of a smell is hampered by the absence of pervasive local cues that point the searcher in the right direction. A strategy based on maximal information could show the way.


  • Industrial Development and Operation of an Efficient Riser Separation System for FCC Units

    by Thierry Gauthier, Regis Andreux, Jan Verstraete, Romain Roux, Jay Ross

    With over 300 units in operation, Fluid Catalytic Cracking (FCC) is currently the dominant refinery conversion process. Over the last years, rapid separation of hydrocarbon vapors and catalyst at the riser outlet has been put forward to limit non-selective decomposition of reaction products, thus enhancing product selectivities.A new riser separator system, called RS², was developed to minimize post-riser cracking, while maintaining flexibility of operation. The development included cold flow testing, CFD and pilot plant testing, and aimed at minimizing both thermal degradation and catalytic overcracking. Cold flow testing was conducted at a representative scale (scale 1/10th) on a large cold flow mock-up. Testing various riser separator configurations provided a thorough understanding, both through visual observations, pressure drop measurements and tracer studies. Hot pilot plant testing was conducted to investigate the effect on yields of the riser separation system in the reactor-stripper under adiabatic operation as a function of operating conditions. The separator had a significant impact on the FCC heat balance and a large reduction of dry gas yield was observed.The resulting technology was successfully implemented on an industrial resid catalytic cracking unit. Operation of the separator was proven smooth and flexible with enhanced performance, while the industrial observations confirm the R&D conclusions. This paper therefore summarizes the R&D study and the industrial operation trends. In particular, the impact of stripper bed level on operation is discussed and explained based on the flow phenomena and design aspects.