Fang Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fang Jiang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Guoguang Cheng
State Key Laboratory of Advanced Metallurgy, School of Metallurgical and Ecological Engineering; University of Science and Technology Beijing; Beijing 100083 China
3 shared publicationsYou Xie
State Key Laboratory of Advanced Metallurgy, School of Metallurgical and Ecological Engineering; University of Science and Technology Beijing; Beijing 100083 China
3 shared publicationsGuo-Guang Cheng
University of Science and Technology Beijing
1 shared publicationGuoyu Qian
State Key Laboratory of Advanced Metallurgy, School of Metallurgical and Ecological Engineering; University of Science and Technology Beijing; Beijing 100083 China
1 shared publication- Guoyu Qian
State Key Laboratory of Advanced Metallurgy , University of Science and Technology Beijing , Beijing 100083 , China
1 shared publication Liang Yang
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, P. R. China
1 shared publication
Latest Publications
- 2 April 2013
- Published by Wiley in Steel Research International
- Vol. 84 (11) , 1098-1103
Reoxidation of Al-Killed Molten Steel by Fe2O3and Cr2O3in the Magnesia-Chromite Refractory
- 2 April 2013
- Published by Wiley in Steel Research International
- Vol. 84 (11) , 1098-1103
Reoxidation of Al-Killed Molten Steel by Fe2O3and Cr2O3in the Magnesia-Chromite Refractory
- 20 January 2013
- Published by Wiley in Steel Research International
- Vol. 84 (6) , 554-559
Evaluation of Sulfur Addition to the High Basicity Slag on the Sulfur, Aluminum, and Cleanliness of High Sulfur Al‐Killed Molten Steel
- 20 January 2013
- Published by Wiley in Steel Research International
- Vol. 84 (6) , 554-559
Evaluation of Sulfur Addition to the High Basicity Slag on the Sulfur, Aluminum, and Cleanliness of High Sulfur Al‐Killed Molten Steel
- 5 June 2012
- Published by Wiley in Steel Research International
- Vol. 83 (9) , 892-895
Reoxidation of Al‐Killed Steel by Ca(OH)2 in the High Basicity Slag
In the present work, reoxidation of Al‐killed steel by Ca(OH)2 in high basicity slag was investigated by using laboratory experiments at 1873 K in MgO crucibles with various amount of Ca(OH)2 addition into slag. The CaO–SiO2–Al2O3–MgO–Ca(OH)2 slags were used to study the effect of Ca(OH)2 on total oxygen content, aluminum loss, and FeO content in the slag. It was shown that total oxygen content decreased with the time when no Ca(OH)2 was added into the slag, but it first increased and then decreased with the time when the addition of Ca(OH)2 was made. Moreover, aluminum loss and FeO content in the slag increased with increasing Ca(OH)2 content.
- 5 June 2012
- Published by Wiley in Steel Research International
- Vol. 83 (9) , 892-895
Reoxidation of Al‐Killed Steel by Ca(OH)2 in the High Basicity Slag
In the present work, reoxidation of Al‐killed steel by Ca(OH)2 in high basicity slag was investigated by using laboratory experiments at 1873 K in MgO crucibles with various amount of Ca(OH)2 addition into slag. The CaO–SiO2–Al2O3–MgO–Ca(OH)2 slags were used to study the effect of Ca(OH)2 on total oxygen content, aluminum loss, and FeO content in the slag. It was shown that total oxygen content decreased with the time when no Ca(OH)2 was added into the slag, but it first increased and then decreased with the time when the addition of Ca(OH)2 was made. Moreover, aluminum loss and FeO content in the slag increased with increasing Ca(OH)2 content.
- 1 January 2011
- Published by EDP Sciences in Revue de Métallurgie
- Vol. 108 (7-8) , 465-472
Effect of orifice configuration on the volumetric mass transfer coefficient during ladle purging
Physical model experiments were performed to clarify the influence of orifice configuration on the volumetric mass transfer coefficient during ladle purging. Bubble behavior was recorded by a high speed video camera in the present study. And carbon dioxide desorption from an aqueous NaOH solution was used to measure the volumetric mass transfer coefficient. It is found that bubbles for multi-hole orifice are generally smaller than those for 1-hole orifice. However, when the hole distance in the multi-hole orifice is too short to avoid bubble coalescence, large bubbles will be formed. It is shown that there is a decreasing tendency of the volumetric mass transfer coefficient when the hole diameter increases. The volumetric mass transfer coefficient firstly increases with increasing the hole distance and hole number. Thereafter, it remains approximately constant with further increase in the hole distance and hole number.
- 1 January 2011
- Published by EDP Sciences in Revue de Métallurgie
- Vol. 108 (7-8) , 465-472
Effect of orifice configuration on the volumetric mass transfer coefficient during ladle purging
Physical model experiments were performed to clarify the influence of orifice configuration on the volumetric mass transfer coefficient during ladle purging. Bubble behavior was recorded by a high speed video camera in the present study. And carbon dioxide desorption from an aqueous NaOH solution was used to measure the volumetric mass transfer coefficient. It is found that bubbles for multi-hole orifice are generally smaller than those for 1-hole orifice. However, when the hole distance in the multi-hole orifice is too short to avoid bubble coalescence, large bubbles will be formed. It is shown that there is a decreasing tendency of the volumetric mass transfer coefficient when the hole diameter increases. The volumetric mass transfer coefficient firstly increases with increasing the hole distance and hole number. Thereafter, it remains approximately constant with further increase in the hole distance and hole number.