Yaser Dahman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yaser Dahman has a total of 125 co-authors. Here are the top co-authors by number of shared publications:
Mustafa Abu Ghalia
Department of Chemical Engineering, Ryerson University, Ontario, Canada
7 shared publications- Dana Almasri
Department of Electrical, Computer & Biomedical Engineering, Toronto Metropolitan University, Toronto, ON M5B 2K3, Canada
4 shared publications Azman Hassan
Polymer Engineering Department, Faculty of Chemical Engineering, Universiti Teknologi Malaysia 81310 Skudai, Johor Bahr, Malaysia
2 shared publicationsBohdan Volynets
2 shared publicationsDana Almasri
Biomedical Engineering Graduate Program, Toronto Metropolitan University, Toronto, ON, Canada
2 shared publicationsFarhad Ein-Mozaffari
2 shared publications
Latest Publications
- Open Access
Degradable Alternatives to Single-Use Plastics: Mechanisms, Materials, and Strategies for Sustainable Polyolefin Replacement
The widespread use of single-use plastics, particularly polyethylene (PE) and polypropylene (PP), has resulted in severe environmental pollution due to their durability and resistance to degradation. This report reviews current degradable alternatives to conventional polyolefins and strategies for enhancing their breakdown in natural and managed environments. Mechanisms of abiotic and biotic degradation are examined alongside the influence of environmental factors and standardized testing protocols. Commercially available biodegradable polymers—such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs), poly(butylene succinate) (PBS), poly(butylene adipate-co-terephthalate) (PBAT), starch-based plastics, cellulose derivatives, chitosan, and protein-based materials—are evaluated for their sources, degradation behavior, applications, scalability, and limitations. In addition, modification techniques for PE and PP, including copolymerization, pro-degradant additives, blending with biodegradable fillers, surface functionalization, enzyme-assisted degradation, and photocatalytic additives, are critically assessed for their potential to reduce environmental persistence. Key challenges such as performance trade-offs, incomplete degradation, ecotoxicity, cost, scalability, and end-of-life management are discussed within the context of circular economic integration. This report concludes with future research directions aimed at developing cost-effective, high-performance materials that degrade completely under real-world conditions while minimizing ecological impacts.
Open AccessDegradable Alternatives to Single-Use Plastics: Mechanisms, Materials, and Strategies for Sustainable Polyolefin Replacement
The widespread use of single-use plastics, particularly polyethylene (PE) and polypropylene (PP), has resulted in severe environmental pollution due to their durability and resistance to degradation. This report reviews current degradable alternatives to conventional polyolefins and strategies for enhancing their breakdown in natural and managed environments. Mechanisms of abiotic and biotic degradation are examined alongside the influence of environmental factors and standardized testing protocols. Commercially available biodegradable polymers—such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs), poly(butylene succinate) (PBS), poly(butylene adipate-co-terephthalate) (PBAT), starch-based plastics, cellulose derivatives, chitosan, and protein-based materials—are evaluated for their sources, degradation behavior, applications, scalability, and limitations. In addition, modification techniques for PE and PP, including copolymerization, pro-degradant additives, blending with biodegradable fillers, surface functionalization, enzyme-assisted degradation, and photocatalytic additives, are critically assessed for their potential to reduce environmental persistence. Key challenges such as performance trade-offs, incomplete degradation, ecotoxicity, cost, scalability, and end-of-life management are discussed within the context of circular economic integration. This report concludes with future research directions aimed at developing cost-effective, high-performance materials that degrade completely under real-world conditions while minimizing ecological impacts.
- Open Access
- 7 July 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (13) , 6524
Greener Synthesis of Eco-Friendly Biodegradable Mesoporous Bioactive Glasses with and Without Thermal Treatment and Its Effects on Drug Delivery and In Vitro Bioactivity
This study investigates the use of a salt template to synthesize mesoporous bioactive glass (MBG). Different salts were used as hard templates to create pores in the glass structure to investigate the possibility of using acid-soluble salt templates and to understand the properties of glass synthesized without thermal treatment. The MBGs were synthesized in a TRIS buffer solution at a pH of 9.5 to allow hydrolysis of the metal oxide precursors. The glass was then washed with mild acid to remove the template. After the samples were washed, some were subjected to thermal treatment, while others were not to investigate the impact of thermal treatment on the structure of the MBG. The successful synthesis of MBG was confirmed by X-ray diffraction, Fourier-transfer infrared spectroscopy, scanning emission scanning microscope, and nitrogen adsorption–desorption analysis. This synthesized MBG had a large surface area, pore volume, pore size, and high drug loading efficiency. MBG synthesized without thermal treatment had slower degradation over the test period, but higher loading efficiency and slower drug release, making it appropriate for applications requiring long-term drug delivery while maintaining its bioactivity.
- 7 July 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (13) , 6524
Open AccessGreener Synthesis of Eco-Friendly Biodegradable Mesoporous Bioactive Glasses with and Without Thermal Treatment and Its Effects on Drug Delivery and In Vitro Bioactivity
This study investigates the use of a salt template to synthesize mesoporous bioactive glass (MBG). Different salts were used as hard templates to create pores in the glass structure to investigate the possibility of using acid-soluble salt templates and to understand the properties of glass synthesized without thermal treatment. The MBGs were synthesized in a TRIS buffer solution at a pH of 9.5 to allow hydrolysis of the metal oxide precursors. The glass was then washed with mild acid to remove the template. After the samples were washed, some were subjected to thermal treatment, while others were not to investigate the impact of thermal treatment on the structure of the MBG. The successful synthesis of MBG was confirmed by X-ray diffraction, Fourier-transfer infrared spectroscopy, scanning emission scanning microscope, and nitrogen adsorption–desorption analysis. This synthesized MBG had a large surface area, pore volume, pore size, and high drug loading efficiency. MBG synthesized without thermal treatment had slower degradation over the test period, but higher loading efficiency and slower drug release, making it appropriate for applications requiring long-term drug delivery while maintaining its bioactivity.
- Open Access
- 11 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (10) , 5363
Bioactive Glass Preloaded with Antibiotics for Delivery of Long-Term Localized Drug Release Exhibiting Inherent Antimicrobial Activity
Bacterial infections caused by biofilms are often difficult to treat due to the resistant nature of the latter, which require high concentrations of antibiotics to be applied for prolonged periods to achieve complete eradication. This study aimed to design a new drug delivery system for long-term drug release for the treatment of bacterial infections. Specifically, bioactive glass preloaded with vancomycin (BG-V) and synthesized without any thermal treatment was designed to load higher percentages of the drug and release it slowly over time. In this study, BG-V was-synthesized using a solution containing vancomycin, with glass being formed around it by adding metal precursors to this solution. The BG-V was then left to dry at room temperature to form a white powder with vancomycin trapped in the structure. The successful synthesis of BG-V was confirmed by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning emission microscopy, and nitrogen adsorption–desorption analysis. The results showed that BG-V was successfully developed using FTIR, showing vancomycin within the BG-V structure. After the drug release, BG-V showed great bioactivity, as indicated by the XRD and bacterial studies. The result shows that drug release is controlled by a combination of diffusion through the matrix and the gradual erosion of the delivery system.
- 11 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (10) , 5363
Open AccessBioactive Glass Preloaded with Antibiotics for Delivery of Long-Term Localized Drug Release Exhibiting Inherent Antimicrobial Activity
Bacterial infections caused by biofilms are often difficult to treat due to the resistant nature of the latter, which require high concentrations of antibiotics to be applied for prolonged periods to achieve complete eradication. This study aimed to design a new drug delivery system for long-term drug release for the treatment of bacterial infections. Specifically, bioactive glass preloaded with vancomycin (BG-V) and synthesized without any thermal treatment was designed to load higher percentages of the drug and release it slowly over time. In this study, BG-V was-synthesized using a solution containing vancomycin, with glass being formed around it by adding metal precursors to this solution. The BG-V was then left to dry at room temperature to form a white powder with vancomycin trapped in the structure. The successful synthesis of BG-V was confirmed by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning emission microscopy, and nitrogen adsorption–desorption analysis. The results showed that BG-V was successfully developed using FTIR, showing vancomycin within the BG-V structure. After the drug release, BG-V showed great bioactivity, as indicated by the XRD and bacterial studies. The result shows that drug release is controlled by a combination of diffusion through the matrix and the gradual erosion of the delivery system.
- Open Access
- 22 April 2025
- Published by MDPI AG in Preprints.org
Bioactive Glass Preloaded with Antibiotics for Long-Term Delivery Localized Drug Release Exhibiting Inherent Antimicrobial Activity
This study aimed to design a new drug delivery system for long-term drug release for the treatment of various diseases. Bioactive glass preloaded with vancomycin (BG-V), synthesized without any thermal treatment, was designed to load higher percentages of the drug and release it slowly over time. In this study, BG-V was synthesized using a solution containing vancomycin to allow the glass to form around it. BG-V was then left to dry at room temperature to form a white powder with vancomycin trapped in the structure. The successful synthesis of BG-V was confirmed by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning emission scanning microscopy, and nitrogen adsorption-desorption analysis. The results showed that BG-V was successfully developed using FTIR, showing vancomycin within the BG-V structure. After the drug release, BG-V shows great bioactivity as shown by XRD and bacterial studies.
- 22 April 2025
- Published by MDPI AG in Preprints.org
Open AccessBioactive Glass Preloaded with Antibiotics for Long-Term Delivery Localized Drug Release Exhibiting Inherent Antimicrobial Activity
This study aimed to design a new drug delivery system for long-term drug release for the treatment of various diseases. Bioactive glass preloaded with vancomycin (BG-V), synthesized without any thermal treatment, was designed to load higher percentages of the drug and release it slowly over time. In this study, BG-V was synthesized using a solution containing vancomycin to allow the glass to form around it. BG-V was then left to dry at room temperature to form a white powder with vancomycin trapped in the structure. The successful synthesis of BG-V was confirmed by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning emission scanning microscopy, and nitrogen adsorption-desorption analysis. The results showed that BG-V was successfully developed using FTIR, showing vancomycin within the BG-V structure. After the drug release, BG-V shows great bioactivity as shown by XRD and bacterial studies.
- Open Access
- 8 January 2025
- Published by SAGE Publications in Journal of Biomaterials Applications
- Vol. 39 (9) , 1064-1083
Impact of composition and surfactant-templating on mesoporous bioactive glasses structural evolution, bioactivity, and drug delivery property
This study explores mesoporous bioactive glasses (MBGs) that show promise as advanced therapeutic delivery platforms owing to their tailorable porous properties enabling enhanced drug loading capacity and biomimetic chemistry for localized, sustained release. This work systematically investigates the complex relationship between MBG composition and surfactant templating on structural evolution, in vitro bioactive response, resultant drug loading efficiency and release. A total of 12 samples of sol-gel-derived MBG were synthesized using cationic and non-ionic structure-directing agents (cetyltrimethylammonium bromide, Pluronic F127 and P123) while modulating the SiO2/CaO content, generating MBG with surface areas of 60–695 m2/g. Electron microscopy and nitrogen desorption studies verified the successful synthesis of the 12 ordered MBG formulations. Assessment of hydroxyapatite conversion kinetics via FTIR spectroscopy and SEM demonstrated accelerated deposition for 70–80% SiO2 formulations, independent of the surfactant used. However, the templating agent had an impact on drug loading as observed in this study where MBG synthesized by the templating agent Pluronic P123 had higher drug loading compared to the other surfactants. To determine the drug release mechanisms, the in vitro kinetic profiles were fitted to various mathematical models including ze-ro. Most compositions exhibited release properties closest to zero-order, indicating a concentration-independent drug elution rate. These results in this study explain the relationship between tailored hierarchical architecture and intrinsic ion release rates to enable advanced functionality.
- 8 January 2025
- Published by SAGE Publications in Journal of Biomaterials Applications
- Vol. 39 (9) , 1064-1083
Open AccessImpact of composition and surfactant-templating on mesoporous bioactive glasses structural evolution, bioactivity, and drug delivery property
This study explores mesoporous bioactive glasses (MBGs) that show promise as advanced therapeutic delivery platforms owing to their tailorable porous properties enabling enhanced drug loading capacity and biomimetic chemistry for localized, sustained release. This work systematically investigates the complex relationship between MBG composition and surfactant templating on structural evolution, in vitro bioactive response, resultant drug loading efficiency and release. A total of 12 samples of sol-gel-derived MBG were synthesized using cationic and non-ionic structure-directing agents (cetyltrimethylammonium bromide, Pluronic F127 and P123) while modulating the SiO2/CaO content, generating MBG with surface areas of 60–695 m2/g. Electron microscopy and nitrogen desorption studies verified the successful synthesis of the 12 ordered MBG formulations. Assessment of hydroxyapatite conversion kinetics via FTIR spectroscopy and SEM demonstrated accelerated deposition for 70–80% SiO2 formulations, independent of the surfactant used. However, the templating agent had an impact on drug loading as observed in this study where MBG synthesized by the templating agent Pluronic P123 had higher drug loading compared to the other surfactants. To determine the drug release mechanisms, the in vitro kinetic profiles were fitted to various mathematical models including ze-ro. Most compositions exhibited release properties closest to zero-order, indicating a concentration-independent drug elution rate. These results in this study explain the relationship between tailored hierarchical architecture and intrinsic ion release rates to enable advanced functionality.
- 29 November 2024
- Published by Springer Nature
- p. 93-121
Nanostructured Polymer Capsules and Their Applications: Current Status and Future Opportunities
- 29 November 2024
- Published by Springer Nature
- p. 93-121
Nanostructured Polymer Capsules and Their Applications: Current Status and Future Opportunities
- Open Access
Optimizing the Mixing Ratios of Source-Separated Organic Waste and Thickened Waste Activated Sludge in Anaerobic Co-Digestion: A New Approach
Anaerobic co-digestion (AnCoD) presents several advantages over conventional mono-digestion. Various factors can impact the efficiency of the co-digestion process, including the mixing ratio of the feedstocks. This study primarily investigates the effects of different mixing ratios on methane production during the co-digestion of source-separated municipal organic waste (SSO) with thickened waste activated sludge (TWAS). While the C/N or COD/N ratio has generally been used for optimizing the mixing ratios of co-digested feedstocks, a new approach is introduced in this study to evaluate the effects of the lipid, protein, and carbohydrate (L:P:C) ratios on the efficiency of AnCoD with respect to methane production, kinetics, and synergism at mixing ratios of TWAS:SSO of 10:90, 30:70, 50:50, 70:30, and 10:90. AnCoD improved methane production and kinetics relative to TWAS at all mixing ratios, the highest of which was at the 10:90 ratio, corresponding to a methane yield, maximum methane production rate, and an L:P:C ratio of 353 mL CH4/g COD, 25 mL CH4/g COD/d, and 8:1:18, respectively. Improvements in methane yields and kinetics due to synergy were evident at all mixing ratios, with improvements in methane yields ranging from 11 to 23% and improvements in kinetics ranging from 18 to 58%. Improvements in methane yields and kinetics were insensitive to the feedstock composition beyond the 50:50 mixing ratio.
Open AccessOptimizing the Mixing Ratios of Source-Separated Organic Waste and Thickened Waste Activated Sludge in Anaerobic Co-Digestion: A New Approach
Anaerobic co-digestion (AnCoD) presents several advantages over conventional mono-digestion. Various factors can impact the efficiency of the co-digestion process, including the mixing ratio of the feedstocks. This study primarily investigates the effects of different mixing ratios on methane production during the co-digestion of source-separated municipal organic waste (SSO) with thickened waste activated sludge (TWAS). While the C/N or COD/N ratio has generally been used for optimizing the mixing ratios of co-digested feedstocks, a new approach is introduced in this study to evaluate the effects of the lipid, protein, and carbohydrate (L:P:C) ratios on the efficiency of AnCoD with respect to methane production, kinetics, and synergism at mixing ratios of TWAS:SSO of 10:90, 30:70, 50:50, 70:30, and 10:90. AnCoD improved methane production and kinetics relative to TWAS at all mixing ratios, the highest of which was at the 10:90 ratio, corresponding to a methane yield, maximum methane production rate, and an L:P:C ratio of 353 mL CH4/g COD, 25 mL CH4/g COD/d, and 8:1:18, respectively. Improvements in methane yields and kinetics due to synergy were evident at all mixing ratios, with improvements in methane yields ranging from 11 to 23% and improvements in kinetics ranging from 18 to 58%. Improvements in methane yields and kinetics were insensitive to the feedstock composition beyond the 50:50 mixing ratio.
- Open Access
- 19 September 2023
- Published by MDPI AG in Fermentation
- Vol. 9 (9) , 855
Strategies for Improving Lignocellulosic Butanol Production and Recovery in ABE Fermentation by Tailoring Clostridia Metabolic Perturbations
The present study investigates approaches to enhance bio-butanol production using lignocellulosic feedstock via supplements of metabolism perturbation. Traditionally, bio-butanol has been produced through chemical synthesis in a process known as acetone–butanol–ethanol (ABE) fermentation. Today, biochemical techniques involving bacterial strains capable of producing butanol are used with renewable sources of biomass. In this study, a stepwise approach was tailored for metabolic perturbations to maximize butanol production from pure sugar and lignocellulosic feedstock as a reference model fermentation. In preliminary investigations, impacts of CaCO3, furfural and methyl red on cell growth, sugar utilization, acid production and butanol production were evaluated in glucose feedstock and xylose feedstock. Following the preliminary investigation, with supplementation of 4 g/L CaCO3, the concentrations of furan derivatives (75% furfural and 25% HMF) and ZnSO4 were optimized for maximal butanol production from glucose and xylose feedstocks, respectively. A final experiment of butanol production was concluded using lignocellulosic feedstock hydrolysate normally containing 0.5~1.5 g/L furan derivatives under optimized conditions of 2 mg/L ZnSO4 and 4 g/L CaCO3. Under optimized conditions, butanol production exceeded 10 g/L in wheat straw hydrolysate, which was significantly higher than that obtained in the absence of ZnSO4 and CaCO3. As compared to the traditional lignocellulosic feedstock post-treatment method, the metabolic perturbations method shows advantages in terms of productivity and economics.
- 19 September 2023
- Published by MDPI AG in Fermentation
- Vol. 9 (9) , 855
Open AccessStrategies for Improving Lignocellulosic Butanol Production and Recovery in ABE Fermentation by Tailoring Clostridia Metabolic Perturbations
The present study investigates approaches to enhance bio-butanol production using lignocellulosic feedstock via supplements of metabolism perturbation. Traditionally, bio-butanol has been produced through chemical synthesis in a process known as acetone–butanol–ethanol (ABE) fermentation. Today, biochemical techniques involving bacterial strains capable of producing butanol are used with renewable sources of biomass. In this study, a stepwise approach was tailored for metabolic perturbations to maximize butanol production from pure sugar and lignocellulosic feedstock as a reference model fermentation. In preliminary investigations, impacts of CaCO3, furfural and methyl red on cell growth, sugar utilization, acid production and butanol production were evaluated in glucose feedstock and xylose feedstock. Following the preliminary investigation, with supplementation of 4 g/L CaCO3, the concentrations of furan derivatives (75% furfural and 25% HMF) and ZnSO4 were optimized for maximal butanol production from glucose and xylose feedstocks, respectively. A final experiment of butanol production was concluded using lignocellulosic feedstock hydrolysate normally containing 0.5~1.5 g/L furan derivatives under optimized conditions of 2 mg/L ZnSO4 and 4 g/L CaCO3. Under optimized conditions, butanol production exceeded 10 g/L in wheat straw hydrolysate, which was significantly higher than that obtained in the absence of ZnSO4 and CaCO3. As compared to the traditional lignocellulosic feedstock post-treatment method, the metabolic perturbations method shows advantages in terms of productivity and economics.
- Open Access
- 29 July 2023
- Published by MDPI AG in Biomimetics
- Vol. 8 (4) , 334
Biomimetic Orthopedic Footwear Advanced Insole Materials to Be Used in Medical Casts for Weight-Bearing Monitoring
Fabrication, characterization and testing of protective biomimetic orthopedic footwear advanced insole materials are introduced. The main objective of this material is to preserve and isolate a set of sensors for the Weight-Bearing Monitoring System (WBMS) device. Twenty-one samples of renewably sourced Polyurethane Foam (PUF) composed of poly(trimethylene ether) glycol (PO3G) and unmodified castor oil (CO) were synthesized and evaluated according to predetermined criteria. Response surface methodology of Box—Behnken design was applied to study the effect of the polyols ratio, isocyanate index (II), and blowing agent ratio on the properties (hardness, density) of PUFs. Results showed that CO/PO3G/Tolyene Diisocyanate (TDI) PUFs with hardness Shore A 17–22 and density of 0.19–0.25 g/cm3 demonstrate the required characteristics and can potentially be used as a durable and functional insole material. Phase separation studies have found the presence of well-segregated structures in PUFs having polyols ratio of CO:PO3G 1:3 and low II, which further explains their extraordinary elastic properties (400% elongation). Analysis of cushioning performance of PUF signified that five samples have Cushioning Energy (CE) higher than 70 N·mm and Cushioning Factor (CF) in the range of 4–8, hence are recommended for application in WBMS due to superior weight-bearing and pressure-distributing properties. Moreover, the developed formulation undergoes anaerobic soil bacterial degradation and can be categorized as a “green” bio-based material.
- 29 July 2023
- Published by MDPI AG in Biomimetics
- Vol. 8 (4) , 334
Open AccessBiomimetic Orthopedic Footwear Advanced Insole Materials to Be Used in Medical Casts for Weight-Bearing Monitoring
Fabrication, characterization and testing of protective biomimetic orthopedic footwear advanced insole materials are introduced. The main objective of this material is to preserve and isolate a set of sensors for the Weight-Bearing Monitoring System (WBMS) device. Twenty-one samples of renewably sourced Polyurethane Foam (PUF) composed of poly(trimethylene ether) glycol (PO3G) and unmodified castor oil (CO) were synthesized and evaluated according to predetermined criteria. Response surface methodology of Box—Behnken design was applied to study the effect of the polyols ratio, isocyanate index (II), and blowing agent ratio on the properties (hardness, density) of PUFs. Results showed that CO/PO3G/Tolyene Diisocyanate (TDI) PUFs with hardness Shore A 17–22 and density of 0.19–0.25 g/cm3 demonstrate the required characteristics and can potentially be used as a durable and functional insole material. Phase separation studies have found the presence of well-segregated structures in PUFs having polyols ratio of CO:PO3G 1:3 and low II, which further explains their extraordinary elastic properties (400% elongation). Analysis of cushioning performance of PUF signified that five samples have Cushioning Energy (CE) higher than 70 N·mm and Cushioning Factor (CF) in the range of 4–8, hence are recommended for application in WBMS due to superior weight-bearing and pressure-distributing properties. Moreover, the developed formulation undergoes anaerobic soil bacterial degradation and can be categorized as a “green” bio-based material.
- Open Access
- 3 May 2023
- Published by MDPI AG in Pharmaceutics
- Vol. 15 (5) , 1401
Prosthetic Joint Infections: Biofilm Formation, Management, and the Potential of Mesoporous Bioactive Glass as a New Treatment Option
Infection of prosthetic joints is one of the biggest challenges to a successful replacement of the joint after a total joint arthroplasty. Such infections are caused by bacterial colonies that are difficult to treat by systemic delivery of antibiotics. Local delivery of antibiotics can prove to be the solution to such a devastating outcome that impacts patients’ health and ability to regain function in their joints as well as costs the healthcare system millions of dollars every year. This review will discuss prosthetic joint infections in detail with a focus on the development, management, and diagnosis of the infections. Surgeons often opt to use polymethacrylate cement locally to deliver antibiotics; however, due to the rapid release of antibiotics, non-biodegradability, and high chance of reinfection, the search for alternatives is in high demand. One of the most researched alternatives to current treatments is the use of biodegradable and highly compatible bioactive glass. The novelty of this review lies in its focus on mesoporous bioactive glass as a potential alternative to current treatments for prosthetic joint infection. Mesoporous bioactive glass is the focus of this review because it has a higher capacity to deliver biomolecules, stimulate bone growth, and treat infections after prosthetic joint replacement surgeries. The review also examines different synthesis methods, compositions, and properties of mesoporous bioactive glass, highlighting its potential as a biomaterial for the treatment of joint infections.
- 3 May 2023
- Published by MDPI AG in Pharmaceutics
- Vol. 15 (5) , 1401
Open AccessProsthetic Joint Infections: Biofilm Formation, Management, and the Potential of Mesoporous Bioactive Glass as a New Treatment Option
Infection of prosthetic joints is one of the biggest challenges to a successful replacement of the joint after a total joint arthroplasty. Such infections are caused by bacterial colonies that are difficult to treat by systemic delivery of antibiotics. Local delivery of antibiotics can prove to be the solution to such a devastating outcome that impacts patients’ health and ability to regain function in their joints as well as costs the healthcare system millions of dollars every year. This review will discuss prosthetic joint infections in detail with a focus on the development, management, and diagnosis of the infections. Surgeons often opt to use polymethacrylate cement locally to deliver antibiotics; however, due to the rapid release of antibiotics, non-biodegradability, and high chance of reinfection, the search for alternatives is in high demand. One of the most researched alternatives to current treatments is the use of biodegradable and highly compatible bioactive glass. The novelty of this review lies in its focus on mesoporous bioactive glass as a potential alternative to current treatments for prosthetic joint infection. Mesoporous bioactive glass is the focus of this review because it has a higher capacity to deliver biomolecules, stimulate bone growth, and treat infections after prosthetic joint replacement surgeries. The review also examines different synthesis methods, compositions, and properties of mesoporous bioactive glass, highlighting its potential as a biomaterial for the treatment of joint infections.