Nikolay A. Popov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nikolay A. Popov has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Svetlana M. Starikovskaia
Laboratory of Plasma Physics (CNRS, Ecole Polytechnique, Univ. Paris-Sud, Observatoire de Paris, Sorbonne Université, l’Institut Polytechnique de Paris), Ecole Polytechnique, route de Saclay, 91128 Palaiseau, France
10 shared publications - Alexey N. Bocharov
Joint Institute for High Temperatures, Russian Academy of Sciences, Moscow, Russia
4 shared publications A. N. Bocharov
Joint Institute for High Temperatures, Russian Academy of Sciences, Moscow, Russia
3 shared publicationsE. A. Mareev
Gaponov-Grekhov Institute of Applied Physics, Russian Academy of Sciences, Nizhny Novgorod, Russia
3 shared publications- Egor V. Parkevich
P. N. Lebedev Physical Institute of the Russian Academy of Sciences 1 , 53 Leninskiy Prospekt, Moscow 119991
3 shared publications - Inna Orel
Laboratory of Plasma Physics, (CNRS, Ecole Polytechnique, Univ. Paris-Sud, Observatoire de Paris, Sorbonne Université, l’Institut Polytechnique de Paris), Ecole Polytechnique, Route de Saclay, Palaiseau 91128, France
3 shared publications
Latest Publications
- 1 August 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (8)
Transition from a cathode spot to a growing highly ionized filament in a spark discharge in atmospheric air
The transition from a cathode spot to a growing highly ionized filament in a pulsed nanosecond spark discharge in atmospheric air is investigated using multi-frame picosecond laser interferometry and shadow photography. The study integrates experimental observations with theoretical estimates into a unified physical picture linking explosive electron emission at the cathode, rapid polarization of the near-cathode plasma, ionization wave propagation, and plasma-chemical kinetics. The ionization wave velocity is determined as a fundamental characteristic of the filamentation process, independent of discharge type, electrode geometry, and initiation method, as confirmed by a comprehensive comparison with the literature. Statistical analysis of several hundred shots with Au, Cu, and Mo cathodes reveals that the generation of highly ionized cathode plasma is a universal phenomenon for different cathode materials and that the near-cathode plasma composition includes ionized metal vapor, while air ionization dominates in the bulk filament. A characteristic filamentation time governing the transition to the regime dominated by atomic nitrogen ions is estimated from the observed filament growth rate and agrees with plasma-kinetic modeling. These results provide a coherent physical picture of the transition from a cathode spot to a growing spark filament.
- 1 August 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (8)
Transition from a cathode spot to a growing highly ionized filament in a spark discharge in atmospheric air
The transition from a cathode spot to a growing highly ionized filament in a pulsed nanosecond spark discharge in atmospheric air is investigated using multi-frame picosecond laser interferometry and shadow photography. The study integrates experimental observations with theoretical estimates into a unified physical picture linking explosive electron emission at the cathode, rapid polarization of the near-cathode plasma, ionization wave propagation, and plasma-chemical kinetics. The ionization wave velocity is determined as a fundamental characteristic of the filamentation process, independent of discharge type, electrode geometry, and initiation method, as confirmed by a comprehensive comparison with the literature. Statistical analysis of several hundred shots with Au, Cu, and Mo cathodes reveals that the generation of highly ionized cathode plasma is a universal phenomenon for different cathode materials and that the near-cathode plasma composition includes ionized metal vapor, while air ionization dominates in the bulk filament. A characteristic filamentation time governing the transition to the regime dominated by atomic nitrogen ions is estimated from the observed filament growth rate and agrees with plasma-kinetic modeling. These results provide a coherent physical picture of the transition from a cathode spot to a growing spark filament.
- 22 May 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (20)
Pressure-threshold explosive cathode processes as the dominant source of a high-density plasma in nanosecond air discharges
We report a pressure-threshold phenomenon in nanosecond air discharges: explosive cathode processes become the dominant source of a dense highly ionized plasma at air pressures above ∼100 Torr. Picosecond laser imaging reveals that these explosive processes, while competing with air ionization, result in the ejection of cathode material over a time scale shorter than 1 ns to create a plasma with electron densities as high as ≈6 × 1019 cm−3, significantly exceeding values achievable through air ionization alone. The explosive processes exhibit a sharp onset, disappearing when the air pressure drops by as little as tens of Torr relative to 100 Torr. Our findings demonstrate that, at high air pressures, cathode vaporization—rather than gas ionization—initiates the generation of such a dense plasma and enables electric spark formation. At intermediate pressures, below ∼100 Torr, yet above vacuum conditions, this explosive mechanism is suppressed, and the discharge transitions to a regime governed by volumetric gas ionization. This behavior contrasts with vacuum discharges, where cathode material is the dominant plasma source. The revealed threshold mechanism is crucial for controlling plasma in applications ranging from nanoparticle synthesis to pulsed power systems.
- 22 May 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (20)
Pressure-threshold explosive cathode processes as the dominant source of a high-density plasma in nanosecond air discharges
We report a pressure-threshold phenomenon in nanosecond air discharges: explosive cathode processes become the dominant source of a dense highly ionized plasma at air pressures above ∼100 Torr. Picosecond laser imaging reveals that these explosive processes, while competing with air ionization, result in the ejection of cathode material over a time scale shorter than 1 ns to create a plasma with electron densities as high as ≈6 × 1019 cm−3, significantly exceeding values achievable through air ionization alone. The explosive processes exhibit a sharp onset, disappearing when the air pressure drops by as little as tens of Torr relative to 100 Torr. Our findings demonstrate that, at high air pressures, cathode vaporization—rather than gas ionization—initiates the generation of such a dense plasma and enables electric spark formation. At intermediate pressures, below ∼100 Torr, yet above vacuum conditions, this explosive mechanism is suppressed, and the discharge transitions to a regime governed by volumetric gas ionization. This behavior contrasts with vacuum discharges, where cathode material is the dominant plasma source. The revealed threshold mechanism is crucial for controlling plasma in applications ranging from nanoparticle synthesis to pulsed power systems.
- 1 May 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (5) , 055010
Mechanisms of anomalous N 2 + (B 2 Σ u + ) population in a nitrogen near-atmospheric pressure plasma jet and its afterglow
An anomalously high relative density of the N 2 + (B 2 Σ u + , v = 0 ) state is observed in the plasma bulk of a nanosecond near-atmospheric pressure plasma jet in nitrogen during its quasi-DC phase and afterglow. The presence of an excitation of the N 2 + (B 2 Σ u + , v = 0 ) state additional to the direct electron impact is confirmed by analyzing the rotational structure of the (0–0) transition of the first negative system (FNS) of nitrogen. Numerical kinetic modeling is used to identify possible mechanisms of additional N 2 + (B 2 Σ u + , v = 0 ) formation. Kinetic calculations taking into account the production of N 2 + (B 2 Σ u + , v = 0 ) in the reaction between the N 2 ( a ~ ) (an effective electronic state with a population equal to the sum of populations of all singlet states with electronic energy of 8.4–8.8 eV) and N 2 (C 3 Π u ) states as well as in the reaction of the N 2 ( a ~ ) state with N 4 + ions describe adequately the FNS(0–0) emission dynamics and the high relative density of the N 2 + (B 2 Σ u + , v = 0 ) state observed experimentally.
- 1 May 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (5) , 055010
Mechanisms of anomalous N 2 + (B 2 Σ u + ) population in a nitrogen near-atmospheric pressure plasma jet and its afterglow
An anomalously high relative density of the N 2 + (B 2 Σ u + , v = 0 ) state is observed in the plasma bulk of a nanosecond near-atmospheric pressure plasma jet in nitrogen during its quasi-DC phase and afterglow. The presence of an excitation of the N 2 + (B 2 Σ u + , v = 0 ) state additional to the direct electron impact is confirmed by analyzing the rotational structure of the (0–0) transition of the first negative system (FNS) of nitrogen. Numerical kinetic modeling is used to identify possible mechanisms of additional N 2 + (B 2 Σ u + , v = 0 ) formation. Kinetic calculations taking into account the production of N 2 + (B 2 Σ u + , v = 0 ) in the reaction between the N 2 ( a ~ ) (an effective electronic state with a population equal to the sum of populations of all singlet states with electronic energy of 8.4–8.8 eV) and N 2 (C 3 Π u ) states as well as in the reaction of the N 2 ( a ~ ) state with N 4 + ions describe adequately the FNS(0–0) emission dynamics and the high relative density of the N 2 + (B 2 Σ u + , v = 0 ) state observed experimentally.
- 1 February 2026
- Published by Pleiades Publishing Ltd in Plasma Physics Reports
- Vol. 52 (2) , 208-216
Radiative Continuum of Molecular Hydrogen in a Diffuse Pulse-Periodic Discharge in Low-Pressure Humid Air
- 1 February 2026
- Published by Pleiades Publishing Ltd in Plasma Physics Reports
- Vol. 52 (2) , 208-216
Radiative Continuum of Molecular Hydrogen in a Diffuse Pulse-Periodic Discharge in Low-Pressure Humid Air
- 30 December 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 112 (6) , 065211
Threshold effects in the development of highly ionized plasma channels in a pulsed nanosecond discharge in air at pressures of 100–760 Torr
The formation processes of highly ionized plasma channels (filaments), with an electron concentration of N_{e}∼10^{18}-10^{19}cm^{-3}, in a pulsed nanosecond discharge in air at a pressure of 100-760 Torr are investigated. The studies are carried out for millimeter-sized gaps with a point cathode and flat anode. It is established that explosive processes at the cathode give rise to the emergence of an ionization wave propagating toward the anode with a velocity of ∼10^{6}-10^{7} cm/s and initiating the development of highly ionized filaments. The wave's propagation velocity is practically independent of the air pressure. At pressures 400-760 Torr, the ionization wave front is unstable and splits into numerous microchannels with typical diameters of ∼20µm and electron concentrations N_{e}=(1-5)×10^{19}cm^{-3}. The microchannel formation ceases to be observed when the air pressure decreases from 400 to 300 Torr, whereas the discharge development occurs mainly through the development of a uniform highly ionized plasma filament. A decrease in pressure entails the drop in the maximum values of electron concentrations, which, however, are close to the values corresponding to complete ionization. Theoretical estimates of characteristic filamentation times are presented together with the analysis of the possible mechanism responsible for generating plasma with a high degree of ionization. The findings can be helpful in refining the models of plasma-chemical kinetics and the formation mechanisms of a system of highly ionized microchannels in high-pressure discharges at nanosecond times.
- 30 December 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 112 (6) , 065211
Threshold effects in the development of highly ionized plasma channels in a pulsed nanosecond discharge in air at pressures of 100–760 Torr
The formation processes of highly ionized plasma channels (filaments), with an electron concentration of N_{e}∼10^{18}-10^{19}cm^{-3}, in a pulsed nanosecond discharge in air at a pressure of 100-760 Torr are investigated. The studies are carried out for millimeter-sized gaps with a point cathode and flat anode. It is established that explosive processes at the cathode give rise to the emergence of an ionization wave propagating toward the anode with a velocity of ∼10^{6}-10^{7} cm/s and initiating the development of highly ionized filaments. The wave's propagation velocity is practically independent of the air pressure. At pressures 400-760 Torr, the ionization wave front is unstable and splits into numerous microchannels with typical diameters of ∼20µm and electron concentrations N_{e}=(1-5)×10^{19}cm^{-3}. The microchannel formation ceases to be observed when the air pressure decreases from 400 to 300 Torr, whereas the discharge development occurs mainly through the development of a uniform highly ionized plasma filament. A decrease in pressure entails the drop in the maximum values of electron concentrations, which, however, are close to the values corresponding to complete ionization. Theoretical estimates of characteristic filamentation times are presented together with the analysis of the possible mechanism responsible for generating plasma with a high degree of ionization. The findings can be helpful in refining the models of plasma-chemical kinetics and the formation mechanisms of a system of highly ionized microchannels in high-pressure discharges at nanosecond times.
- 1 November 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (11) , 115014
Nanosecond discharges as a tool for measuring energy efficiency ( G -values) at high reduced electric fields based on nitrogen dissociation
The production of reactive species in nanosecond, repetitively pulsed plasmas is of decisive importance in tailoring such discharges to different applications. In this paper, we examine the features and advantages of using a nanosecond discharge at moderate pressure as a tool for measuring the G -value. The N-atom production in a pure N 2 , nanosecond pulsed plasma at a moderate pressure of 20 mbar and high reduced electric field of 180 ± 20 Td is adopted as the test case. The atomic nitrogen density is measured using two-photon absorption laser-induced fluorescence (TALIF). A principal objective of this work is to compare the resulting G -value with those of other authors at lower electric fields and with our previous paper measuring G -values at the same reduced electric fields but higher specific energy deposition (SED). The spatially non-uniform profile of plasma in the present work, which displays a minimum at the center, necessitates the conception and implementation of an in-house, Abel inversion algorithm to accurately reconstruct the radial profile. This in turn permits a more accurate determination of the nitrogen dissociation in the entire tube, thereby achieving good agreement with kinetic simulations. Taken together, these results conclusively demonstrate the advantages of using pulsed nanosecond discharges at moderate pressures for studying the energy efficiency of dissociation processes at high E/N .
- 1 November 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (11) , 115014
Nanosecond discharges as a tool for measuring energy efficiency ( G -values) at high reduced electric fields based on nitrogen dissociation
The production of reactive species in nanosecond, repetitively pulsed plasmas is of decisive importance in tailoring such discharges to different applications. In this paper, we examine the features and advantages of using a nanosecond discharge at moderate pressure as a tool for measuring the G -value. The N-atom production in a pure N 2 , nanosecond pulsed plasma at a moderate pressure of 20 mbar and high reduced electric field of 180 ± 20 Td is adopted as the test case. The atomic nitrogen density is measured using two-photon absorption laser-induced fluorescence (TALIF). A principal objective of this work is to compare the resulting G -value with those of other authors at lower electric fields and with our previous paper measuring G -values at the same reduced electric fields but higher specific energy deposition (SED). The spatially non-uniform profile of plasma in the present work, which displays a minimum at the center, necessitates the conception and implementation of an in-house, Abel inversion algorithm to accurately reconstruct the radial profile. This in turn permits a more accurate determination of the nitrogen dissociation in the entire tube, thereby achieving good agreement with kinetic simulations. Taken together, these results conclusively demonstrate the advantages of using pulsed nanosecond discharges at moderate pressures for studying the energy efficiency of dissociation processes at high E/N .
- 1 September 2025
- Published by Pleiades Publishing Ltd in Plasma Physics Reports
- Vol. 51 (9) , 1100-1104
Model of Current Formation at the Initial Stage of Return Stroke
The experimental studies of the breakthrough phase of the leader spark discharge in 1.3 m gap are presented. A numerical model describing the dynamics of streamer zone parameters and the dynamics of leader current pulse during the breakthrough phase is developed. The dependences of leader velocity in the breakthrough phase on the reduced electric field E/N in the streamer zone are obtained. These dependences are compared with the measurement data; it is shown that the leader velocity VL ~ (E/N)3/2. Agreement between the calculated and measured time profiles of the leader current during the breakthrough phase is obtained. It is shown that the main origin of the sharp increase in the current at times of 1–2 μs is the growth of the reduced electric field in the streamer zone, associated with a decrease in the length of this zone as a result of the convergence of the leader heads. The growth of the field leads to an increase in the streamer velocity in the streamer zone, an increase in the leader current and the velocity of the leaders.
- 1 September 2025
- Published by Pleiades Publishing Ltd in Plasma Physics Reports
- Vol. 51 (9) , 1100-1104
Model of Current Formation at the Initial Stage of Return Stroke
The experimental studies of the breakthrough phase of the leader spark discharge in 1.3 m gap are presented. A numerical model describing the dynamics of streamer zone parameters and the dynamics of leader current pulse during the breakthrough phase is developed. The dependences of leader velocity in the breakthrough phase on the reduced electric field E/N in the streamer zone are obtained. These dependences are compared with the measurement data; it is shown that the leader velocity VL ~ (E/N)3/2. Agreement between the calculated and measured time profiles of the leader current during the breakthrough phase is obtained. It is shown that the main origin of the sharp increase in the current at times of 1–2 μs is the growth of the reduced electric field in the streamer zone, associated with a decrease in the length of this zone as a result of the convergence of the leader heads. The growth of the field leads to an increase in the streamer velocity in the streamer zone, an increase in the leader current and the velocity of the leaders.
- 1 September 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (9) , 095010
Fast gas heating and peculiarities of temperature measurements by optical emission spectroscopy in nanosecond surface dielectric barrier discharge
The aim of this work is the experimental and theoretical study of nanosecond Surface dielectric barrier discharge (SDBD) parameters in atmospheric pressure air. Measurements of electric current and delivered energy, ICCD images of the discharge at all stages of its evolution, and gas heating in the discharge and near afterglow are performed. The paper presents the results of 2D numerical modeling of the nanosecond SDBD. The results of the calculations are compared with measured data on the dynamics of current, energy input and gas heating. Special attention is paid to the study of the spatial structure of the discharge, in particular, to the distribution of gas temperature and the second positive system emission intensity in the direction perpendicular to the surface of the dielectric. It is shown that the results of temperature measurements in SDBD using optical emission spectroscopy technique are severely influenced by this spatial structure. The parameters of a probe discharge of smaller amplitude, which is formed by a reflected pulse 500 ns after the main discharge, are also calculated. The possibility of using the second diagnostic pulse to measure the gas temperature in the afterglow discharge is discussed.
- 1 September 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (9) , 095010
Fast gas heating and peculiarities of temperature measurements by optical emission spectroscopy in nanosecond surface dielectric barrier discharge
The aim of this work is the experimental and theoretical study of nanosecond Surface dielectric barrier discharge (SDBD) parameters in atmospheric pressure air. Measurements of electric current and delivered energy, ICCD images of the discharge at all stages of its evolution, and gas heating in the discharge and near afterglow are performed. The paper presents the results of 2D numerical modeling of the nanosecond SDBD. The results of the calculations are compared with measured data on the dynamics of current, energy input and gas heating. Special attention is paid to the study of the spatial structure of the discharge, in particular, to the distribution of gas temperature and the second positive system emission intensity in the direction perpendicular to the surface of the dielectric. It is shown that the results of temperature measurements in SDBD using optical emission spectroscopy technique are severely influenced by this spatial structure. The parameters of a probe discharge of smaller amplitude, which is formed by a reflected pulse 500 ns after the main discharge, are also calculated. The possibility of using the second diagnostic pulse to measure the gas temperature in the afterglow discharge is discussed.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Plasma Physics Reports
- Vol. 51 (8) , 974-984
Numerical Simulation of the Pulse-Periodic Nanosecond Discharge in the Methane–Air Mixture
The ignition characteristics of a methane–air mixture in a single plasma channel maintained by a pulsed-periodic nanosecond discharge with a pulse repetition rate of 5 MHz are considered. The dependence of the ignition delay time and combustion wave formation on the discharge channel current is investigated. A key point is that high electric fields (~100–300 Td) existing during the first few nanoseconds of each cycle ensure mixture ionization and the efficient production of chemically active particles. The characteristic decay time of the generated plasma exceeds the pause time between pulses, resulting in a noticeable level of pre-ionization of the plasma channel before the next discharge pulse. After the discharge is switched off, combustion wave propagation is maintained for several milliseconds. Combustion of the combustible mixture occurs in a channel whose volume is two to three orders of magnitude larger than the channel created by the pulsed discharge itself. The obtained results allow one to conclude that the use of such a distributed multi-channel pulse-periodic discharge of nanosecond duration for ignition of combustible mixtures can be an alternative to spark ignition.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Plasma Physics Reports
- Vol. 51 (8) , 974-984
Numerical Simulation of the Pulse-Periodic Nanosecond Discharge in the Methane–Air Mixture
The ignition characteristics of a methane–air mixture in a single plasma channel maintained by a pulsed-periodic nanosecond discharge with a pulse repetition rate of 5 MHz are considered. The dependence of the ignition delay time and combustion wave formation on the discharge channel current is investigated. A key point is that high electric fields (~100–300 Td) existing during the first few nanoseconds of each cycle ensure mixture ionization and the efficient production of chemically active particles. The characteristic decay time of the generated plasma exceeds the pause time between pulses, resulting in a noticeable level of pre-ionization of the plasma channel before the next discharge pulse. After the discharge is switched off, combustion wave propagation is maintained for several milliseconds. Combustion of the combustible mixture occurs in a channel whose volume is two to three orders of magnitude larger than the channel created by the pulsed discharge itself. The obtained results allow one to conclude that the use of such a distributed multi-channel pulse-periodic discharge of nanosecond duration for ignition of combustible mixtures can be an alternative to spark ignition.