Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lavinia Tofan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:

  • Carmen Paduraru

    Department of Environmental Engineering and Management, Faculty of Chemical Engineering and Environmental Protection, “Gheorghe Asachi” Technical University of Iasi, Iasi, Romania

    5 shared publications
  • Carmen Paduraru

    Department of Environmental Engineering and Management, “Gheorghe Asachi” Technical University of Iasi, 73 D. Mangeron Street, 700050 Iasi, Romania

    2 shared publications
  • Igor Cretescu

    Department of Environmental Engineering and Management, Gheorghe Asachi Technical University of Iaşi, Iaşi, Romania

    2 shared publications
  • Rodica Wenkert

    Soroka Medical Center, Soroka University , Beer-Sheva, Ragher , Israel

    2 shared publications
  • Anca Ceica

    Gheorghe Asachi" Technical University of Iasi, Faculty of Chemical Engineering and Environmental Protection, Department of Environmental Engineering and Management, 71A D. Mangeron Blvd, 700050 Iasi, Romania

    1 shared publication
  • Carmen Teodosiu

    Faculty of Chemical Engineering and Environmental Protection, Department of Environmental Engineering and Management, “Gheorghe Asachi” Technical University of Iasi, 73 Prof. Dr. D. Mangeron Street, 700050 Iasi, Romania

    1 shared publication

Latest Publications

  • Open Access

    Insights into the Applications of Natural Fibers to Metal Separation from Aqueous Solutions

    by Lavinia Tofan

    There is a wide range of renewable materials with attractive prospects for the development of green technologies for the removal and recovery of metals from aqueous streams. A special category among them are natural fibers of biological origin, which combine remarkable biosorption properties with the adaptability of useful forms for cleanup and recycling purposes. To support the efficient exploitation of these advantages, this article reviews the current state of research on the potential and real applications of natural cellulosic and protein fibers as biosorbents for the sequestration of metals from aqueous solutions. The discussion on the scientific literature reports is made in sections that consider the classification and characterization of natural fibers and the analysis of performances of lignocellulosic biofibers and wool, silk, and human hair waste fibers to the metal uptake from diluted aqueous solutions. Finally, future research directions are recommended. Compared to other reviews, this work debates, systematizes, and correlates the available data on the metal biosorption on plant and protein biofibers, under non-competitive and competitive conditions, from synthetic, simulated, and real solutions, providing a deep insight into the biosorbents based on both types of eco-friendly fibers.


  • Open Access

    Renewable Resource Biosorbents for Pollutant Removal from Aqueous Effluents in Column Mode

    by Lavinia Tofan, Daniela Suteu

    The present work deals with the continuous flow systems based on renewable resource biosorbents towards the green removal of various categories of chemical pollutants from aqueous media. The opening discussions are focused on: (a) renewable resources; (b) biosorbents based on renewable resources; (c) dynamic biosorption. After these, the renewable resources biosorbents are reviewed according to the parameters of breakthrough curves. Subsequently, the targeted biosorbents are systematized and analyzed according to the following criteria: (a) their ability to work as remediation agents for heavy metal ions and dyes, respectively; (b) their relevancy for continuous biosorption processes applied both to synthetic aqueous solutions and real wastewaters. The perspective directions of research for the implementation of biosorbents from renewable resources in practical column strategies for wastewater treatment are recommended.


  • Open Access

    Polymeric Biomass Derived Adsorbents for Co(II) Remediation, Recycling and Analysis

    by Lavinia Tofan

    The gradual replacement of conventional materials with materials tailored to the green development goals is one of the needs of the day. Correspondingly, this article reviews and integrates, for the first time, the gathered knowledge on the use of the adsorbents based on polymeric biomasses (biosorbents) for a cleaner separation of cobalt (Co) from synthetic and actual solutions. It is a two-part comprehensive approach that debates the Co biosorption potential of bio-based polymers from the perspective of their virtual and real applications for decontamination, recovery, and analytical purposes. First, the removal performances of these materials to batch and fixed column biosorption of Co(II) from mono-component and multi-metallic laboratory solutions are systematized and discussed. Following that, the focus of the first part is shifted to the analytical capabilities of the biosorbents proposed for Co(II) quantification from synthetic solutions. The second section considers the polymeric biomasses successfully incorporated in practical strategies for the removal and recovery of Co(II) from real solutions. The opportunities provided by the use of biosorbents for the development of accurate and greener procedures in Co(II) analysis are also highlighted. The directions in which the research on this topic should be continued and strengthened are suggested.


  • Open Access

    Valorization of Rapeseed Waste Biomass in Sorption Processes for Wastewater Treatment

    by Irina Morosanu, Carmen Teodosiu, Lavinia Tofan, Daniela Fighir, Carmen Paduraru

    Circular economy provides an efficient framework for effective biomass valorization, through strategic use and processing of resources and waste reuse. Being the second largest energetic crop, rapeseed (RS) presents a high potential in this sense. However, good management of the large quantity of generated wastes from agro-industrial activities is required. The most common management strategies in this sense refer to the reuse of RS wastes (mainly stems and press-cake) for animal feed, compost, soil amendment and fertilizer. Valorization of RS wastes as adsorbent for wastewater treatment is attractive. Despite the fact that only few articles on this subject exist in literature, they are sufficient to reflect the potential of this adsorbent to remove both inorganic and organic compounds from aqueous phase. The rapeseed wastes were used in native form (for diluted effluents) or modified by chemical or thermal treatment (for concentrated effluents or large molecule contaminants). This chapter will provide a review on the RS wastes management strategies, highlighting the applications for removing contaminants from wastewater in single and multi-component systems, in static or continuous operation mode.


  • Chelating polymers with valuable sorption potential for development of precious metal recycling technologies

    by Lavinia Tofan, Rodica Wenkert

    A special attention is currently focused on the recovery of Au, Ag, Pt, Pd and Rh from both primary and secondary sources. From the wide range of sorbents that have been used in this respect, the required selectivity is proved only by the chelating polymers containing donor N, O and S atoms in their functional groups. This work presents the recent published researches on this topic, pointing out the capabilities of chelating sorbents based on organic synthetic polymers for a sustainable development. The chelating sorbents are differentiated and reviewed according to their synthesis strategy and compatibility with synthetic and real matrices. First, an overview on the novel functionalized polymers and impregnated resins with good selectivity for the recovery of most valuable precious metals from synthetic leach solutions is given. Subsequently, the performances of these materials in the selective and preconcentrative recovery of Au, Ag, Pt, Pd and Rh from simulated and real leachates are discussed. The viability of an integrated approach for the determination of precious metals from simulated solutions by solid phase spectrometry is highlighted. The transposition of chelating polymers’ potential in challenging technologies for precious metal recovery-reuse-recycling needs further research on directions that are proposed.


  • Open Access

    Zinc remediation of aqueous solutions by natural hemp fibers: batch desorption/regeneration study

    by Lavinia Tofan, Carmen Paduraru, Ovidiu Toma

    A hemp waste material resulting from the textile industry has previously been shown to be a very efficient material in removing Zn(II) from diluted aqueous solutions. In this work, batch studies on desorption and multiple sorption–regeneration cycles for zinc(II) removal by natural hemp fibers have been carried out. The best desorption results were performed in acidic medium, where the protons in solution replaced the Zn(II) ions on the loaded hemp. The efficiency of Zn(II) desorption with 0.1 M hydrochloric acid is higher than that achieved using sulfuric acid of the same concentration. The amount of Zn(II) desorbed by 0.1 M HCl, 0.1 M H2SO4, and 5% NaCl increases sharply in the first 15–20 min of the process, attaining values that subsequently stay almost constant (for 0.1 M HCl) or sligtly increase (for 0.1 M H2SO4 and 5% NaCl). The sorptive potential of the tested hemp remains almost unchanged after three cycles of sorption–desorption of Zn(II) from solutions with a high mg Zn/g of hemp in the initial ratio. The results of this study are important in order to demonstrate that regenerated hemp could be used for zinc metal removal from water sources without the threat of the sorbent becoming another source of zinc pollution for the environment.


  • Advances in preconcentration/removal of environmentally relevant heavy metal ions from water and wastewater by sorbents based on polyurethane foam

    by Carmen Teodosiu, Rodica Wenkert, Lavinia Tofan, Carmen Paduraru

    An increased interest in the removal of heavy metal ions from aqueous media is encountered due to their toxicity and negative impacts on ecosystems, human health and economic activities. A variety of processes may be used for the removal of heavy metal ions from water and wastewater, such as chemical precipitation, ion exchange, adsorption, membrane processes, etc. However, the removal efficiencies of heavy metals by adsorption depend on several factors such as initial loads of heavy metals in the influent, purpose of treatment (drinking/industrial water production, wastewater treatment for disposal or recycling), costs of the overall process, and properties and conditions for regeneration of the sorbent materials. In this context, the use of polyurethane foams as heavy metal ion sorbents is of a special interest because they provide versatile applications in heavy metal effluent management. This study reviews relevant published researches that are concerned with new sorbents based on polyurethane foams applied in batch and dynamic systems for separation and/or preconcentration of heavy metal ions in environmental aqueous media. This review is divided into the following sections: synthesis of polyurethane foams; physical and chemical properties of polyurethane foams; preconcentration of pollutant metal ions from environmental aqueous media by different types of polyurethane foam (untreated, loaded, reacted and composite polyurethane foams); the applicability of sorbents based on polyurethane foams for water and wastewater treatment; comparison of sorbents based on polyurethane foam with other sorbents for heavy metal ion removal.


  • Open Access

    Solid-phase spectrophotometry use for the determination of trace amounts of Rh(III)

    by Lavinia Tofan

    A simple and sensitive solid-phase spectrophotometric method was developed for the determination of rhodium(III) trace amounts. The proposed procedure is based on the reaction product of disodium-1-nitroso-2-hydroxynaphthalene-3,6-disulfonate(Nitroso R salt) previously loaded on Dowex 1×1 anion exchanger. To find the best analytical conditions for the determination, the experimental variables (wavelength, pH, amount of resin, sample solution volume) were optimized. Under the selected conditions, rhodium(III) can be accurately determined in the range of 0.5–2 μg/ml with an RSD of 1.18% and a degree of sensitivity, expressed by the molar absorptivity, of 3.0356×10 4 l/mol cm. The results obtained on synthetic solutions clearly indicate the feasibility of the proposed method for real sample analysis.


  • INTEGRATED TREATMENT OF LEACHATE FROM MUNICIPAL WASTE SOLID LANDFILL

    by Igor Cretescu, Corneliu Pohontu, Marius Sebastian Secula, Carmen Paduraru, Lavinia Tofan, Matei Macoveanu