Toshiki Tsubota
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Toshiki Tsubota has a total of 110 co-authors. Here are the top co-authors by number of shared publications:
Teruhisa Ohno
Department of Applied Chemistry, Faculty of Engineering, Kyushu Institute of Technology, Kitakyushu, Japan
12 shared publications- Naoya Murakami
Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, 2-4 Hibikino, Wakamatsu-ku, Kitakyushu, Fukuoka 808-0196, Japan
7 shared publications - Duy Anh Khuong
Department of Engineering, Faculty of Engineering, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata-ku, Kitakyushu-shi, Fukuoka 804-8550, Japan
5 shared publications Sunao Kamimura
Department of Applied Chemistry, Faculty of Engineering, Kyushu Institute of Technology, Kitakyushu, Japan
5 shared publications- Dimitrios Kalderis
Department of Electronic Engineering, Hellenic Mediterranean University, 73100 Chania, Greece
4 shared publications - Umer Rashid
Department of Chemistry, COMSATS University Islamabad, Abbottabad Campus, Pakistan
4 shared publications
Latest Publications
- 30 April 2026
- Published by Elsevier in Biomass and Bioenergy
- Vol. 214
Physicochemical properties depended on pyrolysis temperature of charcoal derived from rice husk as porous carbon material
- 30 April 2026
- Published by Elsevier in Biomass and Bioenergy
- Vol. 214
Physicochemical properties depended on pyrolysis temperature of charcoal derived from rice husk as porous carbon material
- 28 March 2025
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (22) , 29517-29519
Correction to: Adsorption characteristics of ciprofloxacin and naproxen from aqueous solution using bamboo biochar
- 28 March 2025
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (22) , 29517-29519
Correction to: Adsorption characteristics of ciprofloxacin and naproxen from aqueous solution using bamboo biochar
- 5 March 2024
- Published by Elsevier in Biomass and Bioenergy
- Vol. 183
Simultaneous syngas and CO2 adsorbent production via rice straw gasification: An experimental study
- 5 March 2024
- Published by Elsevier in Biomass and Bioenergy
- Vol. 183
Simultaneous syngas and CO2 adsorbent production via rice straw gasification: An experimental study
- Open Access
- 29 January 2024
- Published by Springer Nature in Frontiers of Chemical Science and Engineering
- Vol. 18 (4) , 1-10
Autohydrolysis treatment of bamboo and potassium oxalate (K2C2O4) activation of bamboo product for CO2 capture utilization
Typically, the hydroxide agents, such as sodium hydroxide and potassium hydroxide, which have corrosive properties, are used in the carbon activation process. In this study, potassium oxalate (K2C2O4), a less toxic and non-corrosive activating reagent, was used to synthesize activated carbon from the solid residue after autohydrolysis treatment. The effect of the autohydrolysis treatment and the ratio of the K2C2O4/solid residue are presented in this study. Moreover, the comparison between the activated carbon from bamboo and biochar from the solid residue are also reported. The resulting activated carbon from the solid residue exhibited a high surface area of up to 1432 m2·g−1and a total pore volume of up to 0.88 cm3·g−1. The autohydrolysis treatment enhanced the microporosity properties compared to those without pretreatment of the activated carbon. The microporosity of the activated carbon from the solid residue was dominated by the pore width at 0.7 nm, which is excellent for CO2storage. At 25 °C and 1.013 × 105Pa, the CO2captured reached up to 4.1 mmol·g−1. On the other hand, the ratio between K2C2O4and the solid residue has not played a critical role in determining the porosity properties. The ratio of the K2C2O4/solid residue of 2 could help the carbon material reach a highly microporous textural property that produces a high carbon capture capacity. Our finding proved the benefit of using the solid residue from the autohydrolysis treatment as a precursor material and offering a more friendly and sustainable activation carbon process.
- 29 January 2024
- Published by Springer Nature in Frontiers of Chemical Science and Engineering
- Vol. 18 (4) , 1-10
Open AccessAutohydrolysis treatment of bamboo and potassium oxalate (K2C2O4) activation of bamboo product for CO2 capture utilization
Typically, the hydroxide agents, such as sodium hydroxide and potassium hydroxide, which have corrosive properties, are used in the carbon activation process. In this study, potassium oxalate (K2C2O4), a less toxic and non-corrosive activating reagent, was used to synthesize activated carbon from the solid residue after autohydrolysis treatment. The effect of the autohydrolysis treatment and the ratio of the K2C2O4/solid residue are presented in this study. Moreover, the comparison between the activated carbon from bamboo and biochar from the solid residue are also reported. The resulting activated carbon from the solid residue exhibited a high surface area of up to 1432 m2·g−1and a total pore volume of up to 0.88 cm3·g−1. The autohydrolysis treatment enhanced the microporosity properties compared to those without pretreatment of the activated carbon. The microporosity of the activated carbon from the solid residue was dominated by the pore width at 0.7 nm, which is excellent for CO2storage. At 25 °C and 1.013 × 105Pa, the CO2captured reached up to 4.1 mmol·g−1. On the other hand, the ratio between K2C2O4and the solid residue has not played a critical role in determining the porosity properties. The ratio of the K2C2O4/solid residue of 2 could help the carbon material reach a highly microporous textural property that produces a high carbon capture capacity. Our finding proved the benefit of using the solid residue from the autohydrolysis treatment as a precursor material and offering a more friendly and sustainable activation carbon process.
- 14 November 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (2) , 3071-3082
Adsorption characteristics of ciprofloxacin and naproxen from aqueous solution using bamboo biochar
- 14 November 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 15 (2) , 3071-3082
Adsorption characteristics of ciprofloxacin and naproxen from aqueous solution using bamboo biochar
- 27 June 2023
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 307
Supercapacitors composed of Japanese cedar bark-based activated carbons with various activators
- 27 June 2023
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 307
Supercapacitors composed of Japanese cedar bark-based activated carbons with various activators
- 8 December 2022
- Published by Springer Nature in Journal of Porous Materials
- Vol. 30 (4) , 1101-1108
Dependence of pore structure of activated carbon on the performance of electrical double layer capacitor with NaCl aqueous electrolyte
- 8 December 2022
- Published by Springer Nature in Journal of Porous Materials
- Vol. 30 (4) , 1101-1108
Dependence of pore structure of activated carbon on the performance of electrical double layer capacitor with NaCl aqueous electrolyte
- Open Access
Glycerol-Based Retrievable Heterogeneous Catalysts for Single-Pot Esterification of Palm Fatty Acid Distillate to Biodiesel
The by-product of the previous transesterification, glycerol was utilised as an acid catalyst precursor for biodiesel production. The crude glycerol was treated through the sulfonation method with sulfuric acid and chlorosulfonic acid in a reflux batch reactor giving solid glycerol-SO3H and glycerol-ClSO3H, respectively. The synthesised acidic glycerol catalysts were characterised by various analytical techniques such as thermalgravimetric analyser (TGA), infrared spectroscopy, surface properties adsorption-desorption by nitrogen gas, ammonia-temperature programmed desorption (NH3-TPD), X-ray diffraction spectroscopy (XRD), elemental composition analysis by energy dispersive spectrometer (EDX) and surface micrographic morphologies by field emission electron microscope (FESEM). Both glycerol-SO3H and glycerol-ClSO3H samples exhibited mesoporous structures with a low surface area of 8.85 mm2/g and 4.71 mm2/g, respectively, supported by the microscopic image of blockage pores. However, the acidity strength for both catalysts was recorded at 3.43 mmol/g and 3.96 mmol/g, which is sufficient for catalysing PFAD biodiesel at the highest yield. The catalytic esterification was optimised at 96.7% and 98.2% with 3 wt.% of catalyst loading, 18:1 of methanol-PFAD molar ratio, 120 °C, and 4 h of reaction. Catalyst reusability was sustained up to 3 reaction cycles due to catalyst deactivation, and the insight investigation of spent catalysts was also performed.
Open AccessGlycerol-Based Retrievable Heterogeneous Catalysts for Single-Pot Esterification of Palm Fatty Acid Distillate to Biodiesel
The by-product of the previous transesterification, glycerol was utilised as an acid catalyst precursor for biodiesel production. The crude glycerol was treated through the sulfonation method with sulfuric acid and chlorosulfonic acid in a reflux batch reactor giving solid glycerol-SO3H and glycerol-ClSO3H, respectively. The synthesised acidic glycerol catalysts were characterised by various analytical techniques such as thermalgravimetric analyser (TGA), infrared spectroscopy, surface properties adsorption-desorption by nitrogen gas, ammonia-temperature programmed desorption (NH3-TPD), X-ray diffraction spectroscopy (XRD), elemental composition analysis by energy dispersive spectrometer (EDX) and surface micrographic morphologies by field emission electron microscope (FESEM). Both glycerol-SO3H and glycerol-ClSO3H samples exhibited mesoporous structures with a low surface area of 8.85 mm2/g and 4.71 mm2/g, respectively, supported by the microscopic image of blockage pores. However, the acidity strength for both catalysts was recorded at 3.43 mmol/g and 3.96 mmol/g, which is sufficient for catalysing PFAD biodiesel at the highest yield. The catalytic esterification was optimised at 96.7% and 98.2% with 3 wt.% of catalyst loading, 18:1 of methanol-PFAD molar ratio, 120 °C, and 4 h of reaction. Catalyst reusability was sustained up to 3 reaction cycles due to catalyst deactivation, and the insight investigation of spent catalysts was also performed.