Abhijit Majumdar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abhijit Majumdar has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Rainer Hippler
Institute of Physics, Czech Academy of Sciences 1 , Na Slovance 2, Prague 18221
5 shared publications Gobind Das
Institute of Physics, Ernst-Moritz-Arndt-University Greifswald, Felix-Hausdorff-Str. 6, 17489 Greifswald, Germany, Lab. BIONEM, Università Magna Græcia di Catanzaro, Campus Germaneto, Viale Europa, 88100 Catanzaro, Italy, and Institute for Biochemistry, Ernst-Moritz-Arndt-University Greifswald, Felix-Hausdorff-Str. 4, 17489 Greifswald, Germany
2 shared publicationsDaniel Köpp
Ernst-Moritz-Arndt-Universität Greifswald 1 Institut für Physik Felix-Hausdorff-Str. 6, 17489 Greifswald, Germany
1 shared publicationDebabrata Ghose
Surface Physics Division, Saha Institute of Nuclear Physics, 1/AF Bidhan Nagar, Kolkata 700 064, India
1 shared publicationDebasish Datta
Saha Institute of Nuclear Physics 2 Surface Physics Division 1/AF Bidhan Nagar, Kolkata 700 064, India
1 shared publicationGottfried J. Palm
Ernst-Moritz-Arndt-University Greifswald 2 Institute for Biochemistry Felix-Hausdorff-Str. 4, 17489 Greifswald, Germany
1 shared publication
Latest Publications
- 6 November 2009
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 113 (48) , 15734-15741
Role of Nitrogen in the Formation of HC−N Films by CH4/N2 Barrier Discharge Plasma: Aliphatic Tendency
We have studied the influence of nitrogen on the chemical properties of the hydrogenated carbon nitride (a-CNx:H) film deposited by CH4/N2 dielectric barrier discharge (DBD) plasma. X-ray photoelectron spectroscopy (XPS) indicates that carbon and nitrogen form an unpolarized covalent bond in these C—Nx materials, and the observed chemical shift in the C 1s and N 1s binding energy is explained with respect to N 1s incorporation. Furthermore, the average nitrogen content (N/C ≈ 0.76) in the films was systematically varied by changing the nitrogen partial pressure (CH4/N2 ≈ from 5:1 to 1:7) which is well supported by the elemental analysis. Fourier transform infrared (FTIR) absorption spectra exhibit significant changes in different C—N, C≡N, and NH/OH molecular bands at higher nitrogen concentration in the film. The isonitrile and nitrile groups (—NC and —CN) are increased with the increase of deposition time. In addition, the elemental analysis, proton NMR, and thermolysis mass spectrum show that the composition of the film with the ratio CH4/N2 ≈ 1:1 is C, 67.68; H, 9.88; N, 16.53 (in wt %) and that the film is composed of polymers, probably containing linear chains which are cleaved off on heating in vacuum.
- 6 November 2009
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 113 (48) , 15734-15741
Role of Nitrogen in the Formation of HC−N Films by CH4/N2 Barrier Discharge Plasma: Aliphatic Tendency
We have studied the influence of nitrogen on the chemical properties of the hydrogenated carbon nitride (a-CNx:H) film deposited by CH4/N2 dielectric barrier discharge (DBD) plasma. X-ray photoelectron spectroscopy (XPS) indicates that carbon and nitrogen form an unpolarized covalent bond in these C—Nx materials, and the observed chemical shift in the C 1s and N 1s binding energy is explained with respect to N 1s incorporation. Furthermore, the average nitrogen content (N/C ≈ 0.76) in the films was systematically varied by changing the nitrogen partial pressure (CH4/N2 ≈ from 5:1 to 1:7) which is well supported by the elemental analysis. Fourier transform infrared (FTIR) absorption spectra exhibit significant changes in different C—N, C≡N, and NH/OH molecular bands at higher nitrogen concentration in the film. The isonitrile and nitrile groups (—NC and —CN) are increased with the increase of deposition time. In addition, the elemental analysis, proton NMR, and thermolysis mass spectrum show that the composition of the film with the ratio CH4/N2 ≈ 1:1 is C, 67.68; H, 9.88; N, 16.53 (in wt %) and that the film is composed of polymers, probably containing linear chains which are cleaved off on heating in vacuum.
- 15 October 2009
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 106 (8) , 084701
Dielectric barrier discharge plasma treatment on E. coli: Influence of CH4/N2, O2, N2/O2, N2, and Ar gases
Atmospheric pressure dielectric barrier discharge (DBD) plasma has been employed on Gram-negative bacteria, Escherichia coli BL21. Treatment was carried out using plasma generated with different compositions of gases: CH4/N2 (1:2), O2, N2/O2 (1:1), N2, and Ar, and by varying plasma power and treatment time. E. coli cells were exposed under the DBD plasma in triplicates, and their surviving numbers were observed in terms of colony forming units. It has been observed that the CH4/N2 plasma exhibits relatively higher sterilization property toward E. coli compared to plasma generated by using O2, N2/O2, N2, and Ar gas mixtures. The time to kill up to 90% of the initial population of the E. coli cells was found to be about 2–3 min for CH4/N2 and O2 gas mixture DBD plasma. A prolongation of treatment time and an increase in the dissipated power significantly improved the E. coli killing efficiency of the atmospheric pressure DBD plasma.
- 15 October 2009
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 106 (8) , 084701
Dielectric barrier discharge plasma treatment on E. coli: Influence of CH4/N2, O2, N2/O2, N2, and Ar gases
Atmospheric pressure dielectric barrier discharge (DBD) plasma has been employed on Gram-negative bacteria, Escherichia coli BL21. Treatment was carried out using plasma generated with different compositions of gases: CH4/N2 (1:2), O2, N2/O2 (1:1), N2, and Ar, and by varying plasma power and treatment time. E. coli cells were exposed under the DBD plasma in triplicates, and their surviving numbers were observed in terms of colony forming units. It has been observed that the CH4/N2 plasma exhibits relatively higher sterilization property toward E. coli compared to plasma generated by using O2, N2/O2, N2, and Ar gas mixtures. The time to kill up to 90% of the initial population of the E. coli cells was found to be about 2–3 min for CH4/N2 and O2 gas mixture DBD plasma. A prolongation of treatment time and an increase in the dissipated power significantly improved the E. coli killing efficiency of the atmospheric pressure DBD plasma.
- 1 September 2009
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 80 (9) , 095103
Development of metal nanocluster ion source based on dc magnetron plasma sputtering at room temperature
A simple and cost effective nanocluster ion source for the deposition of size selected metal nanocluster has been developed based on the dc magnetron discharge (including pulsed dc discharge). The most important and interesting feature of this cluster source is that it is working at room temperature, cooled by chilled water during the experiment. There is no extraction unit in this device and the cluster streams flow only due to the pressure gradient from source chamber to substrate via quadrupole mass filter. It has provision of multiple substrate holders in the deposition chamber, which can be controlled manually. The facility consists of quadrupole mass filter (QMF 200), which can select masses in the range of 2–125 000 atoms depending on the target materials, with a constant mass resolution (M/ΔM∼25). The dc magnetron discharge at a power of about 130 W with Ar as feed/buffer gas was used to produce the Cu nanocluster in an aggregation tube and deposited on Si (100) wafer temperature.
- 1 September 2009
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 80 (9) , 095103
Development of metal nanocluster ion source based on dc magnetron plasma sputtering at room temperature
A simple and cost effective nanocluster ion source for the deposition of size selected metal nanocluster has been developed based on the dc magnetron discharge (including pulsed dc discharge). The most important and interesting feature of this cluster source is that it is working at room temperature, cooled by chilled water during the experiment. There is no extraction unit in this device and the cluster streams flow only due to the pressure gradient from source chamber to substrate via quadrupole mass filter. It has provision of multiple substrate holders in the deposition chamber, which can be controlled manually. The facility consists of quadrupole mass filter (QMF 200), which can select masses in the range of 2–125 000 atoms depending on the target materials, with a constant mass resolution (M/ΔM∼25). The dc magnetron discharge at a power of about 130 W with Ar as feed/buffer gas was used to produce the Cu nanocluster in an aggregation tube and deposited on Si (100) wafer temperature.
- 1 January 2008
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 155 (1) , D22-D26
Microstructural and Chemical Evolution of –CH[sub 3]-Incorporated (Low-k) SiCO(H) Films Prepared by Dielectric Barrier Discharge Plasma
The present work focuses on the incorporation of radicals in organic SiCO(H) films with low dielectric constant . The SiCO(H) films were deposited by dielectric barrier discharge plasma method using a mixture of and Ar gases at different conditions (varying the frequency and pressure). The evolution of the film microstructure was investigated by means of X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) absorption spectroscopy, and atomic force microscopy (AFM). Various bonds, C–C, C–O, Si–O, and , were observed in XPS. In XPS analysis, it is observed that at higher frequency range (from ), radicals (in the form of ) increase significantly. FTIR absorption spectra consist of several vibrational bands: namely, Si–O–Si asymmetric stretching at , symmetric deformation of the group in configuration at , C–H stretching of ( and 3) groups in the region between 3050 and , and –OH related vibrational bands in the range between 3700 and . The change in various deposition parameters causes the change in different Si–O–Si vibrational band ratio, and the intensity of and . The film roughness was verified by AFM measurement.
- 1 January 2008
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 155 (1) , D22-D26
Microstructural and Chemical Evolution of –CH[sub 3]-Incorporated (Low-k) SiCO(H) Films Prepared by Dielectric Barrier Discharge Plasma
The present work focuses on the incorporation of radicals in organic SiCO(H) films with low dielectric constant . The SiCO(H) films were deposited by dielectric barrier discharge plasma method using a mixture of and Ar gases at different conditions (varying the frequency and pressure). The evolution of the film microstructure was investigated by means of X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) absorption spectroscopy, and atomic force microscopy (AFM). Various bonds, C–C, C–O, Si–O, and , were observed in XPS. In XPS analysis, it is observed that at higher frequency range (from ), radicals (in the form of ) increase significantly. FTIR absorption spectra consist of several vibrational bands: namely, Si–O–Si asymmetric stretching at , symmetric deformation of the group in configuration at , C–H stretching of ( and 3) groups in the region between 3050 and , and –OH related vibrational bands in the range between 3700 and . The change in various deposition parameters causes the change in different Si–O–Si vibrational band ratio, and the intensity of and . The film roughness was verified by AFM measurement.
- 1 July 2007
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 78 (7) , 075103
Development of dielectric barrier discharge plasma processing apparatus for mass spectrometry and thin film deposition
Cost effective and a very simple dielectric barrier discharge plasma processing apparatus for thin film deposition and mass spectroscopic analysis of organic gas mixture has been described. The interesting features of the apparatus are the construction of the dielectric electrodes made of aluminum oxide or alumina (Al2O3) and glass and the generation of high ignition voltage from the spark plug transformer taken from car. Metal capacitor is introduced in between ground and oscilloscope to measure the executing power during the discharge and the average electron density in the plasma region. The organic polymer films have been deposited on Si (100) substrate using several organic gas compositions. The experimental setup provides a unique drainage system from the reaction chamber controlled by a membrane pump to suck out and remove the poisonous gases or residuals (cyanogens, H–CN, CHxNH2, etc.) which have been produced during the discharge of CH4∕N2 mixture.
- 1 July 2007
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 78 (7) , 075103
Development of dielectric barrier discharge plasma processing apparatus for mass spectrometry and thin film deposition
Cost effective and a very simple dielectric barrier discharge plasma processing apparatus for thin film deposition and mass spectroscopic analysis of organic gas mixture has been described. The interesting features of the apparatus are the construction of the dielectric electrodes made of aluminum oxide or alumina (Al2O3) and glass and the generation of high ignition voltage from the spark plug transformer taken from car. Metal capacitor is introduced in between ground and oscilloscope to measure the executing power during the discharge and the average electron density in the plasma region. The organic polymer films have been deposited on Si (100) substrate using several organic gas compositions. The experimental setup provides a unique drainage system from the reaction chamber controlled by a membrane pump to suck out and remove the poisonous gases or residuals (cyanogens, H–CN, CHxNH2, etc.) which have been produced during the discharge of CH4∕N2 mixture.