Syouhei Nishihama
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Syouhei Nishihama has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Kazuharu Yoshizuka
The University of Kitakyushu
9 shared publications Kazuharu Yoshizuka
Department of Chemical and Environmental Engineering, Faculty of Environmental Engineering, The University of Kitakyushu
3 shared publicationsAyuko Kitajou
2 shared publicationsKaketo Yoshida
Department of Chemical and Environmental Engineering, Faculty of Environmental Engineering, The University of Kitakyushu
2 shared publicationsTakuya Suzuki
2 shared publicationsAkane Kawasaki
Department of Chemical Engineering, Faculty of Environmental Engineering , The University of Kitakyushu , Hibikino , Kitakyushu , Japan
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by Japan Association of Solvent Extraction in Solvent Extraction Research and Development, Japan
- Vol. 32 (2) , 63-72
Separation and Recovery of Dysprosium and Neodymium from Waste Neodymium Magnet Using Solvent-Impregnated Resin
The separation and recovery of dysprosium (Dy) and neodymium (Nd) from waste Nd magnet was investigated using a solvent-impregnated resin loaded with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester. The leaching solution obtained from the magnet contained Dy and Nd, together with a large amount of iron (Fe). Since Fe suppressed the adsorption of Dy and Nd, ascorbic acid was added to the leaching solution to reduce Fe(III) to Fe(II), enabling their selective adsorption. Although the separation of Dy and Nd was difficult using the conventional frontal separation mode in column operation, the separation was achieved in the gradient elution mode. The proposed separation and recovery process, based on a connected column system, yielded Dy with a purity of 98.9 wt% and a recovery yield of 96.9%, and Nd with a purity of 96.2 wt% and a recovery yield of 95.6%.
- 1 January 2025
- Published by Japan Association of Solvent Extraction in Solvent Extraction Research and Development, Japan
- Vol. 32 (2) , 63-72
Open AccessSeparation and Recovery of Dysprosium and Neodymium from Waste Neodymium Magnet Using Solvent-Impregnated Resin
The separation and recovery of dysprosium (Dy) and neodymium (Nd) from waste Nd magnet was investigated using a solvent-impregnated resin loaded with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester. The leaching solution obtained from the magnet contained Dy and Nd, together with a large amount of iron (Fe). Since Fe suppressed the adsorption of Dy and Nd, ascorbic acid was added to the leaching solution to reduce Fe(III) to Fe(II), enabling their selective adsorption. Although the separation of Dy and Nd was difficult using the conventional frontal separation mode in column operation, the separation was achieved in the gradient elution mode. The proposed separation and recovery process, based on a connected column system, yielded Dy with a purity of 98.9 wt% and a recovery yield of 96.9%, and Nd with a purity of 96.2 wt% and a recovery yield of 95.6%.
- Open Access
- 1 January 2025
- Published by Japan Association of Solvent Extraction in Solvent Extraction Research and Development, Japan
- Vol. 32 (2) , 89-101
Novel Phosphoric and Phosphonic Acid Type Ion Exchange Resin for Separation of Rare Earth Metals
Novel phosphoric and phosphonic acid type ion exchange resins were synthesized as impregnation type resins and surface functional group type resins in the present work, and their adsorption and separation abilities for rare earth metals were investigated. The impregnation type resins were synthesized using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) as a porogen during the synthesis of polymer beads, while the surface functional group type resins were synthesized by immobilizing the phosphoric acid ester ligand onto polymer beads. All ion exchange resins exhibited adsorption ability for dysprosium. The separation abilities for dysprosium and europium with the impregnation type resins were consistent with those with the conventional solvent-impregnated resin containing PC-88A, while almost no selectivity was obtained with the surface functional group type resins. The impregnation type resin can be applied to column operation, and the selective adsorption of dysprosium over neodymium can be achieved by combining a scrubbing method.
- 1 January 2025
- Published by Japan Association of Solvent Extraction in Solvent Extraction Research and Development, Japan
- Vol. 32 (2) , 89-101
Open AccessNovel Phosphoric and Phosphonic Acid Type Ion Exchange Resin for Separation of Rare Earth Metals
Novel phosphoric and phosphonic acid type ion exchange resins were synthesized as impregnation type resins and surface functional group type resins in the present work, and their adsorption and separation abilities for rare earth metals were investigated. The impregnation type resins were synthesized using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) as a porogen during the synthesis of polymer beads, while the surface functional group type resins were synthesized by immobilizing the phosphoric acid ester ligand onto polymer beads. All ion exchange resins exhibited adsorption ability for dysprosium. The separation abilities for dysprosium and europium with the impregnation type resins were consistent with those with the conventional solvent-impregnated resin containing PC-88A, while almost no selectivity was obtained with the surface functional group type resins. The impregnation type resin can be applied to column operation, and the selective adsorption of dysprosium over neodymium can be achieved by combining a scrubbing method.
- 12 September 2024
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 43 (1) , 3-22
Adsorption of Fluoride Ions Using Si–Al–Mg Layered Double Hydroxides
Fluoride occurs naturally in rocks, soil, water, air, plants, and animals and anthropogenically in soil and water.[1] Fluoride in low concentrations is a micronutrient for the human body. However, ...
- 12 September 2024
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 43 (1) , 3-22
Adsorption of Fluoride Ions Using Si–Al–Mg Layered Double Hydroxides
Fluoride occurs naturally in rocks, soil, water, air, plants, and animals and anthropogenically in soil and water.[1] Fluoride in low concentrations is a micronutrient for the human body. However, ...
- Open Access
- 8 January 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 333, 04004
Reductive Adsorption of Chromium(VI) with Activated Carbon
Reductive adsorption of chromium (Cr) has been investigated, employing coal-based activated carbon with batchwise study. The adsorption was carried out by varying parameters such as pH of the aqueous solution and contact time. Cr(III) was hardly adsorbed on activated carbon, and it was precipitated at high pH region. High adsorption amounts of Cr(VI) was obtained at pH range 4.5 – 5.5. In the adsorption process, reduction of Cr(VI) to Cr(III) was occurred at especially acidic pH region, and thus most of Cr remained in the aqueous solution in this pH region was Cr(III).
- 8 January 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 333, 04004
Open AccessReductive Adsorption of Chromium(VI) with Activated Carbon
Reductive adsorption of chromium (Cr) has been investigated, employing coal-based activated carbon with batchwise study. The adsorption was carried out by varying parameters such as pH of the aqueous solution and contact time. Cr(III) was hardly adsorbed on activated carbon, and it was precipitated at high pH region. High adsorption amounts of Cr(VI) was obtained at pH range 4.5 – 5.5. In the adsorption process, reduction of Cr(VI) to Cr(III) was occurred at especially acidic pH region, and thus most of Cr remained in the aqueous solution in this pH region was Cr(III).
- 6 January 2021
- Published by Taylor & Francis in Environmental Technology
- Vol. 43 (14) , 2124-2134
Selective adsorption of lead(II) from aqueous solution
Adsorptive separation of Pb(II) from aqueous solution containing Pb(II) and other heavy metals (Cu(II), Zn(II) and Cd(II)) has been investigated, using three adsorbents, such as an iminodiacetic acid-chelating resin (CR11) and Fe-based adsorbents (goethite and magnetite). Batchwise adsorption of Pb(II) and other metal ions in single metal system and multi-components system was carried out with varying parameters, such as pH, time and initial concentrations of metals. CR11 possesses the highest adsorption ability for these metals, while the selectivity of individual metal is little. Goethite possesses selectivity for Pb(II) and Cu(II), and magnetite possesses selectivity for Pb(II), though the adsorption capacity for the metals is less than those with CR11. The kinetics of the adsorption of metals with all adsorbents is of pseudo-second-order, and the magnetite is revealed to have the fastest adsorption kinetics. The three adsorbents can be applied for chromatographic separation for these metals. The magnetite is feasible for selective separation of Pb(II), although complete elution cannot be achieved. GRAPHICAL ABSTRACT
- 6 January 2021
- Published by Taylor & Francis in Environmental Technology
- Vol. 43 (14) , 2124-2134
Selective adsorption of lead(II) from aqueous solution
Adsorptive separation of Pb(II) from aqueous solution containing Pb(II) and other heavy metals (Cu(II), Zn(II) and Cd(II)) has been investigated, using three adsorbents, such as an iminodiacetic acid-chelating resin (CR11) and Fe-based adsorbents (goethite and magnetite). Batchwise adsorption of Pb(II) and other metal ions in single metal system and multi-components system was carried out with varying parameters, such as pH, time and initial concentrations of metals. CR11 possesses the highest adsorption ability for these metals, while the selectivity of individual metal is little. Goethite possesses selectivity for Pb(II) and Cu(II), and magnetite possesses selectivity for Pb(II), though the adsorption capacity for the metals is less than those with CR11. The kinetics of the adsorption of metals with all adsorbents is of pseudo-second-order, and the magnetite is revealed to have the fastest adsorption kinetics. The three adsorbents can be applied for chromatographic separation for these metals. The magnetite is feasible for selective separation of Pb(II), although complete elution cannot be achieved. GRAPHICAL ABSTRACT
- 3 May 2017
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 53 (7) , 1027-1033
Silica-based solvent impregnated adsorbents for separation of rare earth metals
Silica-based solvent impregnated adsorbents are prepared, employing 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester as an extractant. Two kinds of silica particles are used as supports; (i) those whose surface is coated by a styrene/divinylbenzene copolymer and (ii) those whose hydroxyl-terminated pentadimethyl siloxane group is immobilized on the surface. The adsorbent based on silica particles coated by styrene/divinylbenzene can be repeatedly used for adsorption–elution processing, while the adsorption capacity of the adsorbent based on silica particles modified by the siloxane group is decreased by repeated cycles. The adsorbent is applicable to chromatographic operation for Dy/Nd, and quantitative adsorption–elution is achieved.
- 3 May 2017
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 53 (7) , 1027-1033
Silica-based solvent impregnated adsorbents for separation of rare earth metals
Silica-based solvent impregnated adsorbents are prepared, employing 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester as an extractant. Two kinds of silica particles are used as supports; (i) those whose surface is coated by a styrene/divinylbenzene copolymer and (ii) those whose hydroxyl-terminated pentadimethyl siloxane group is immobilized on the surface. The adsorbent based on silica particles coated by styrene/divinylbenzene can be repeatedly used for adsorption–elution processing, while the adsorption capacity of the adsorbent based on silica particles modified by the siloxane group is decreased by repeated cycles. The adsorbent is applicable to chromatographic operation for Dy/Nd, and quantitative adsorption–elution is achieved.
- 9 May 2016
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 51 (15-16) , 2492-2500
Photo-swing extraction system for the separation of lanthanide using a pyrene group-containing thermosensitive polymer combined with carbon nanotubes
A novel photo-swing extraction system for lanthanide separation was developed using a copolymer of acid phosphoxy ethyl methacrylate (Phosmer-M), N-isopropylacrylamide (NIPAM), and (1-pyrene)methyl methacrylate (Phosmer-M/NIPAM/PyMMA). Single-walled carbon nanotubes (CNTs) were successfully dispersed in the Phosmer-M/NIPAM/PyMMA as a result of the π-π interactions of the pyrene groups. The phase transition of the copolymer was successfully induced via photo-irradiation as a result of heat generation by the CNTs. The extraction of Eu(III) was increased by the photo-irradiation because of changes in volume and hydrophobicity of the copolymer. Separation of the lanthanides was improved by the photo-irradiation, especially for the combination of Eu(III)/Sc(III).
- 9 May 2016
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 51 (15-16) , 2492-2500
Photo-swing extraction system for the separation of lanthanide using a pyrene group-containing thermosensitive polymer combined with carbon nanotubes
A novel photo-swing extraction system for lanthanide separation was developed using a copolymer of acid phosphoxy ethyl methacrylate (Phosmer-M), N-isopropylacrylamide (NIPAM), and (1-pyrene)methyl methacrylate (Phosmer-M/NIPAM/PyMMA). Single-walled carbon nanotubes (CNTs) were successfully dispersed in the Phosmer-M/NIPAM/PyMMA as a result of the π-π interactions of the pyrene groups. The phase transition of the copolymer was successfully induced via photo-irradiation as a result of heat generation by the CNTs. The extraction of Eu(III) was increased by the photo-irradiation because of changes in volume and hydrophobicity of the copolymer. Separation of the lanthanides was improved by the photo-irradiation, especially for the combination of Eu(III)/Sc(III).
- 26 June 2012
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 30 (7) , 724-734
Separation and Recovery of Tetramethyl Ammonium Hydroxide with Mesoporous Silica Having a Hexagonal Structure (MCM-41)
Separation and recovery of tetramethyl ammonium hydroxide (TMAH) was investigated using several types of MCM-41 (mesoporous silica having hexagonal structure) adsorbents. The MCM-41s were prepared by hydrothermal synthesis with structure-directing agents with different alkyl chains. The prepared MCM-41s were characterized with X-ray diffraction, transmission electron microscope, nitrogen gas adsorption, and zeta potential, and then used for adsorption of TMAH. The adsorption of TMAH with MCM-41s increased with pH up to pH ≈ 10 and then decreased as the MCM-41 dissolved. The adsorption of TMAH progressed via the Langmuir mechanism. The maximum adsorption corresponded to the pore diameter and the pore volume of the MCM-41s. MCM-41 also possesses selectivity for TMAH against phenol. The chromatographic operation was conducted using granulated MCM-41 to avoid excessive pressure-drop through the packed column and quantitative adsorption-elution processing of TMAH could be achieved.
- 26 June 2012
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 30 (7) , 724-734
Separation and Recovery of Tetramethyl Ammonium Hydroxide with Mesoporous Silica Having a Hexagonal Structure (MCM-41)
Separation and recovery of tetramethyl ammonium hydroxide (TMAH) was investigated using several types of MCM-41 (mesoporous silica having hexagonal structure) adsorbents. The MCM-41s were prepared by hydrothermal synthesis with structure-directing agents with different alkyl chains. The prepared MCM-41s were characterized with X-ray diffraction, transmission electron microscope, nitrogen gas adsorption, and zeta potential, and then used for adsorption of TMAH. The adsorption of TMAH with MCM-41s increased with pH up to pH ≈ 10 and then decreased as the MCM-41 dissolved. The adsorption of TMAH progressed via the Langmuir mechanism. The maximum adsorption corresponded to the pore diameter and the pore volume of the MCM-41s. MCM-41 also possesses selectivity for TMAH against phenol. The chromatographic operation was conducted using granulated MCM-41 to avoid excessive pressure-drop through the packed column and quantitative adsorption-elution processing of TMAH could be achieved.
- 13 April 2012
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 47 (9) , 1356-1360
Adsorption of Tetraalkyl Ammonium Hydroxide with Mesoporous Silica
Adsorption of tetraalkyl ammonium hydroxide (TAAH) with mesoporous silica such as MCM-41 and MCM-48 has been investigated. The adsorption of TAAH with the mesoporous silica increases with increase in pH of the aqueous solution. The maximum adsorption amounts of TAAH with the mesoporous silica, determined by Langmuir isotherms, correspond to the relationship between the pore diameter of the mesoporous silica and the molecular size of TAAH, while no significant relationship is observed with both the specific surface area and the amount of silanol group of the mesoporous silica. Mesoporous silica having large pore diameter is applicable to the adsorptive separation of TAAH from the effluent solution.
- 13 April 2012
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 47 (9) , 1356-1360
Adsorption of Tetraalkyl Ammonium Hydroxide with Mesoporous Silica
Adsorption of tetraalkyl ammonium hydroxide (TAAH) with mesoporous silica such as MCM-41 and MCM-48 has been investigated. The adsorption of TAAH with the mesoporous silica increases with increase in pH of the aqueous solution. The maximum adsorption amounts of TAAH with the mesoporous silica, determined by Langmuir isotherms, correspond to the relationship between the pore diameter of the mesoporous silica and the molecular size of TAAH, while no significant relationship is observed with both the specific surface area and the amount of silanol group of the mesoporous silica. Mesoporous silica having large pore diameter is applicable to the adsorptive separation of TAAH from the effluent solution.
- 9 April 2012
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 47 (9) , 1369-1373
Selective Recovery of Platinum Group Metals from Spent Automobile Catalyst by Integrated Ion Exchange Methods
Selective recovery of platinum group metals (PGMs), such as Pd, Pt, and Rh, from spent automobile catalyst has been investigated by integrated ion exchange method using dihexyl sulfide (DHS) impregnated resin and commercial weak anion exchange resin (Diaion WA-21) as adsorbents. Batchwise adsorption revealed that the DHS impregnated resin possesses the selective adsorption ability for Pd and WA-21 possesses selectivity for all PGMs, especially Rh. Chromatographic separation of Pd with column packed with DHS impregnated resin can be selectively achieved. The chromatographic separation of Pd and Pt with a column packed with WA-21 is effectively progressed, while that of Rh is insufficient yield due to a slow adsorption rate. Separation of Rh from other two PGMs can therefore be achieved by switching the eluent. Both adsorbents show almost no adsorption abilities for other heavy metals containing in the spent automobile catalyst. Sequential chromatographic operation of the column packed with DHS impregnated resin followed by the column packed with WA-21 can be finally achieved to recover mutual PGM from leaching solution of spent automobile catalyst.
- 9 April 2012
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 47 (9) , 1369-1373
Selective Recovery of Platinum Group Metals from Spent Automobile Catalyst by Integrated Ion Exchange Methods
Selective recovery of platinum group metals (PGMs), such as Pd, Pt, and Rh, from spent automobile catalyst has been investigated by integrated ion exchange method using dihexyl sulfide (DHS) impregnated resin and commercial weak anion exchange resin (Diaion WA-21) as adsorbents. Batchwise adsorption revealed that the DHS impregnated resin possesses the selective adsorption ability for Pd and WA-21 possesses selectivity for all PGMs, especially Rh. Chromatographic separation of Pd with column packed with DHS impregnated resin can be selectively achieved. The chromatographic separation of Pd and Pt with a column packed with WA-21 is effectively progressed, while that of Rh is insufficient yield due to a slow adsorption rate. Separation of Rh from other two PGMs can therefore be achieved by switching the eluent. Both adsorbents show almost no adsorption abilities for other heavy metals containing in the spent automobile catalyst. Sequential chromatographic operation of the column packed with DHS impregnated resin followed by the column packed with WA-21 can be finally achieved to recover mutual PGM from leaching solution of spent automobile catalyst.