GGGiuliano Gregori

Giuliano Gregori

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Giuliano Gregori has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Controlling the Electrical Properties of Undoped and Ta‐Doped TiO2 Polycrystalline Films via Ultra‐Fast‐Annealing Treatments

    by Piero Mazzolini, Tolga Acartürk, Daniel Chrastina, Ulrich Starke, Carlo Spartaco Casari, Giuliano Gregori, Andrea Li Bassi

    A study on the crystallization process of undoped and Ta‐doped TiO2 amorphous thin films is presented. In particular, the effect of ultra‐fast‐annealing treatments in environments characterized by different oxygen concentrations is investigated via in situ resistance measurements. The accurate examination of the key parameters involved in this process allows us to reduce the time needed to obtain highly conducting and transparent polycrystalline thin films (resistivity ≈ 6 × 10−4 Ω cm, mean transmittance in the visible range ≈ 81%) to just 5 min (with respect to the 180 minutes required for a “standard” vacuum annealing treatment) in nitrogen atmosphere (20 ppm oxygen concentration) at ambient pressure. Experimental evidence of superficial oxygen incorporation in the thin films and its detrimental role for the conductivity are obtained by employing different concentrations of traceable 18O isotopes during ultra‐fast annealing treatments. The results are discussed in view of the possible implementation of the ultra‐fast annealing process for TiO2‐based transparent conducting oxides as well as electron selective layers in solar cell devices; taking advantage of the high control of the ultra‐fast crystallization processes which has been achieved, these two functional layers are shown to be obtainable from the crystallization of a single homogeneous thin film.


  • Open Access

    High-temperature superconductivity in space-charge regions of lanthanum cuprate induced by two-dimensional doping

    by F. Baiutti, G. Logvenov, G. Gregori, G. Cristiani, Y. Wang, W. Sigle, P. A. van Aken, J. Maier

    The exploitation of interface effects turned out to be a powerful tool for generating exciting material properties. Such properties include magnetism, electronic and ionic transport and even superconductivity. Here, instead of using conventional homogeneous doping to enhance the hole concentration in lanthanum cuprate and achieve superconductivity, we replace single LaO planes with SrO dopant planes using atomic-layer-by-layer molecular beam epitaxy (two-dimensional doping). Electron spectroscopy and microscopy, conductivity measurements and zinc tomography reveal such negatively charged interfaces to induce layer-dependent superconductivity (Tc up to 35 K) in the space-charge zone at the side of the planes facing the substrate, where the strontium (Sr) profile is abrupt. Owing to the growth conditions, the other side exhibits instead a Sr redistribution resulting in superconductivity due to conventional doping. The present study represents a successful example of two-dimensional doping of superconducting oxide systems and demonstrates its power in this field.


  • Open Access

    Controlling the Electrical Properties of Undoped and Ta-doped TiO2 Polycrystalline Films via Ultra-Fast Annealing Treatments

    by Piero Mazzolini, Tolga Acartürk, Daniel Chrastina, Ulrich Starke, Carlo S. Casari, Giuliano Gregori, Andrea Li Bassi

    We present a study on the crystallization process of undoped and Ta doped TiO2 amorphous thin films. In particular, the effect of ultra-fast annealing treatments in environments characterized by different oxygen concentrations is investigated via in-situ resistance measurements. The accurate examination of the key parameters involved in this process allows us to reduce the time needed to obtain highly conducting and transparent polycrystalline thin films (resistivity about $6 \times 10^{-4}$ {\Omega}cm, mean transmittance in the visible range about $81\%$) to just 5 minutes (with respect to the 180 minutes required for a standard vacuum annealing treatment) in nitrogen atmosphere (20 ppm oxygen concentration) at ambient pressure. Experimental evidence of superficial oxygen incorporation in the thin films and its detrimental role for the conductivity are obtained by employing different concentrations of traceable 18O isotopes during ultra-fast annealing treatments. The results are discussed in view of the possible implementation of the ultra-fast annealing process for TiO2-based transparent conducting oxides as well as electron selective layers in solar cell devices; taking advantage of the high control of the ultra-fast crystallization processes which has been achieved, these two functional layers are shown to be obtainable from the crystallization of a single homogeneous thin film.

  • The Significance of Ion Conduction in a Hybrid Organic–Inorganic Lead‐Iodide‐Based Perovskite Photosensitizer

    by Tae‐Youl Yang, Giuliano Gregori, Norman Pellet, Michael Grätzel, Joachim Maier

    The success of perovskite solar cells has sparked enormous excitement in the photovoltaic community not only because of unexpectedly high efficiencies but also because of the future potential ascribed to such crystalline absorber materials. Far from being exhaustively studied in terms of solid‐state properties, these materials surprised by anomalies such as a huge apparent low‐frequency dielectric constant and pronounced hysteretic current–voltage behavior. Here we show that methylammonium (but also formamidinium) iodoplumbates are mixed conductors with a large fraction of ion conduction because of iodine ions. In particular, we measure and model the stoichiometric polarization caused by the mixed conduction and demonstrate that the above anomalies can be explained by the build‐up of stoichiometric gradients as a consequence of ion blocking interfaces. These findings provide insight into electrical charge transport in the hybrid organic–inorganic lead halide solar cells as well as into new possibilities of improving the photovoltaic performance by controlling the ionic disorder.


  • The Significance of Ion Conduction in a Hybrid Organic–Inorganic Lead‐Iodide‐Based Perovskite Photosensitizer

    by Tae‐Youl Yang, Giuliano Gregori, Norman Pellet, Michael Grätzel, Joachim Maier

    The success of perovskite solar cells has sparked enormous excitement in the photovoltaic community not only because of unexpectedly high efficiencies but also because of the future potential ascribed to such crystalline absorber materials. Far from being exhaustively studied in terms of solid‐state properties, these materials surprised by anomalies such as a huge apparent low‐frequency dielectric constant and pronounced hysteretic current–voltage behavior. Here we show that methylammonium (but also formamidinium) iodoplumbates are mixed conductors with a large fraction of ion conduction because of iodine ions. In particular, we measure and model the stoichiometric polarization caused by the mixed conduction and demonstrate that the above anomalies can be explained by the build‐up of stoichiometric gradients as a consequence of ion blocking interfaces. These findings provide insight into electrical charge transport in the hybrid organic–inorganic lead halide solar cells as well as into new possibilities of improving the photovoltaic performance by controlling the ionic disorder.


  • Numerical calculations of space charge layer effects in nanocrystalline ceria. Part II: detailed analysis of the space charge layer properties

    by Marcus C. Göbel, Giuliano Gregori, Joachim Maier

    The numerical approach presented in Part I is used to investigate in detail some important characteristics of space charge layer (SCL) concentration profiles (steepness, extent, charge contributions and total charge), which determine the resulting SCL effects on the ionic and electronic transport. Here, as a case study the conductivity changes in nanocrystalline ceria are discussed over a broad range of dopant concentration (acceptor and donor-doped) as well as space charge potential values. In addition, the effects of a mobile dopant on the SCL charge carrier profiles are addressed. Finally, using the numerical approach the possibilities of adjusting (under realistic conditions) the SCL effects to improve the conduction properties of nanocrystalline CeO2 are discussed.


  • Numerical calculations of space charge layer effects in nanocrystalline ceria. Part I: comparison with the analytical models and derivation of improved analytical solutions

    by Marcus C. Göbel, Giuliano Gregori, Joachim Maier

    Using numerical solutions of the Poisson-equation, one dimensional space charge layer (SCL) concentration profiles in CeO2 are calculated. The SCL conductivity effects of nanocrystalline CeO2 are analyzed as a function of doping content (donor doped, pure and acceptor doped ceria) and SCL potential including not only the standard Gouy–Chapman and Mott–Schottky cases, but also the more complex mixed situations. The results of the numerical approach are compared with the usual analytical approximations. While for the ideal Gouy–Chapman and Mott–Schottky cases for moderate and high potentials the agreement between analytical and numerical solutions is found to be satisfactory, mixed cases and low potential situations cannot be reliably treated by using the standard analytical approaches. Finally, inspired from the numerical solutions, improved analytical equations are proposed which are found to generally yield much more precise results and are accurate even for the mixed situations and low potentials.


  • Proton Conduction in Dense and Porous Nanocrystalline Ceria Thin Films

    by Giuliano Gregori, Mona Shirpour, Joachim Maier

    The electrical conductivity of ceria thin films (epitaxial as well as dense and porous nanocrystalline) is investigated in dry and wet atmosphere at temperatures below 500 °C. For the epitaxial and the fully dense nanocrystalline samples, no significant differences can be observed between dry and wet conditions. In marked contrast, the nanocrystalline porous films obtained via spin coating exhibit a considerable enhancement of the protonic conductivity below 300 °C in wet atmosphere. This outcome reveals that the residual open mesoporosity plays the key role for the enhancement of the proton transport at low temperatures and not the high density of grain boundaries. The quantitative analysis of the various pathways, along which the proton transport can take place, indicates that the observed proton conduction can arise not only from bulk water adsorbed in the open pores but also from the space charge zones on the water side of the water/oxide interface.


  • Seebeck coefficient and electrical conductivity of mesoscopic nanocrystalline SrTiO3

    by G. Gregori, S. Heinze, P. Lupetin, H.-U. Habermeier, J. Maier


  • Nanosession: Ionics - Redox Kinetics, Ion Transport, and Interfaces

    by R. Merkle, L. Wang, Y. A. Mastrikov, E. A. Kotomin, Giuliano Gregori, Piero Lupetin, Joachim Maier, Jan M. Knaup, Michael Wehlau, Thomas Frauenheim, et al.