CBCraig R. Bartels

Craig R. Bartels

*This is an algorithmically generated author record based on publicly available information.

Craig R. Bartels has a total of 2 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Consideration of energy savings in SWRO

    by Craig R. Bartels, Keith Andes

    Seawater reverse osmosis (SWRO) processes have become the dominant desalination technology in the industry due to the low energy costs of this process. Thanks in large part to improvements in membrane and energy recovery devices, the SWRO process has become the accepted technology for desalination. In one report, current energy costs of SWRO processes have reduced by nearly 90% compared to SWRO in the 1970s and by 75% compared to SWRO in the 1980s. The best current SWRO processes require 2–2.5 kWh/m3 of electrical energy. The question is how much further reduction can be made with a conventional SWRO process. Recent theoretical analysis has shown that there is a diminishing potential for further energy savings in any desalination process. One such report has stated that the ideal SWRO energy consumption is 1.06 kWh/m3 for a 50% recovery plant treating 35,000 mg/l total dissolved solids, while the more realistic practical minimum energy consumption is thought to be 1.56 kWh/m3. With current plants at 2 kWh/m3, there seems to be only another 0.5 kWh/m3 of further savings available. New plants are now using the new high permeable membrane technology and high efficiency energy recovery devices. The energy consumption of a state-of-the-art existing plant, the Gold Coast desalination plant in Australia, is described. This plant is operating at around 3 kW/h/m3 of energy consumption at 19°C and 35,500 mg/l feed salinity. The potential for further savings in a traditional SWRO plant is evaluated. Many of the new process improvements result in very minimal reduction in energy consumption. Furthermore, many of these will raise issues with flux distribution, fouling, pressure drop, and permeate quality. The impact of these issues needs to be included when trying to design a SWRO system for stable performance. One example of a hybrid system design is considered, but these will only give a marginal improvement in energy consumption.


  • Selective color removal nanofiltration membrane for the 7 mgd Irvine Ranch water treatment project

    by C.R. Bartels, M. Wilf

    A new polyether sulfone membrane which was recently developed, has now been used for the purification of colored groundwater. This new nanofiltration membrane was developed to selectively remove organic material with molecular weight greater than 1,000 daltons, while passing most salts. This characteristic is ideal for applications which have low salinity, but high color or other organic compounds. This membrane differs from traditional polyamide RO membranes as it is chlorine tolerant and has a large negative surface charge. This makes it ideal for waters containing high organic levels. This membrane has been extensively pilot tested with other traditional nanofiltration membranes. The membrane had the best combination of high flux, high color removal and minimal hardness removal. As a result of these features the membrane was selected for a 27.8 ML (7.35 mgd) water treatment plant at the Irvine Ranch Water District. The full-scale plant contains about 1,300 pieces of 33.9 square metres (365 sq feet) spiral wound elements. The full-scale plant has been completed and start-up of the first train has been completed. The feed color units (CU) were in excess of 200 CU, while the permeate was less than 5 CU, which meets the requirement of the plant. This is one of the largest membrane plants designed to only remove color from the water.