HLHaiyan Long

Haiyan Long

*This is an algorithmically generated author record based on publicly available information.

Haiyan Long has a total of 2 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Preliminary Design of Bottom-Fixed Lattice Offshore Wind Turbine Towers in the Fatigue Limit State by the Frequency Domain Method

    by Haiyan Long, Geir Moe

    The fatigue assessment of support structures is one of the most significant challenges in the design of offshore wind turbines (OWT). Fatigue analysis can be conducted in either the time-domain or the frequency-domain. The advantage of frequency-domain analysis is its time efficiency. This paper shows how the frequency domain method can be used to dimension lattice-type OWT towers such that they meet the fatigue criteria in the preliminary design stage. Two types of lattice towers, a three-legged and four-legged version, were redesigned in the fatigue limit state for the NREL 5 MW baseline wind turbine sited at a water depth of 35 m. The wall thickness of the members was chosen as the only variable and varied during the design process until the towers could survive for at least 20 years. In comparison with designs based upon ultimate strength, the mass of both types of towers increased no more than 30% when the fatigue limit state was considered. It is concluded that the lattice type structure requires only half as much material as its tubular counterpart. The three-legged tower is promising because of its simple geometry, even though it displayed a lower torsional stiffness than the four-legged tower. All the analyses in this paper were performed by an in-house FE code, intended for the early design stage of lattice towers. Once the optimum configuration is found in the early design stage, integrated time-domain analyses for the entire OWT system might be required to refine the design, taking all the nonlinear parameters into account.


  • Lattice Towers for Bottom-Fixed Offshore Wind Turbines in the Ultimate Limit State: Variation of Some Geometric Parameters

    by Haiyan Long, Geir Moe, Tim Fischer

    Optimal solutions for offshore wind turbines (OWTs) are expected to vary from those of their onshore counterparts because of the harsh offshore climate, and differences in loadings, transportation, access, etc. This definitely includes the support structures required for service in the sea. Lattice towers might be a competitive solution for OWTs due to less physical impact from waves and less concern for visual impact. This paper addresses the design methodology of lattice towers for OWTs in the ultimate limit state and presents a FEM code that has been developed to implement this methodology. The structural topologies are specified in terms of tower cross-section geometry, the inclination of bracings, and the number of segments along the tower height. For each topology a series of towers is designed in which the bottom distance between the legs has been varied; the resulting tower mass is evaluated as a major parameter for the cost assessment. The study was conducted using the NREL 5-MW baseline wind turbine for an offshore site at a water depth of 35 m. The optimal design is searched for according to tower mass and fabrication complexity. The most economical tower geometry appears to have a constant inclination of bracing owing to its simplicity of fabrication and strong antitorsion capacity. Three-legged and four-legged alternatives have different advantages, the former having simpler geometry and the latter offering better torsion resistance. As a design driver for offshore steel structures, the fatigue life of the towers designed in the ultimate limit state should be assessed and the structures are consequently modified, if necessary. However, fatigue assessment is out of the scope of this paper and will be done in a later work.