Yue Qi
Research Subjects
Yue Qi has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
Louis G. Hector
General Motors R&D Center, Warren, Michigan 48090, United States
5 shared publications- Ahmet T. Alpas
Department of Mechanical, Automotive and Materials Engineering, University of Windsor, 401 Sunset Avenue, Windsor, ON N9B 3P4, Canada
3 shared publications - Fatih Gurcag Sen
Center for Nanoscale Materials, Argonne National Laboratory, Lemont, IL 60439, USA
3 shared publications - Haibo Guo
School of Materials Science and Engineering, Shanghai University, Shanghai, China
3 shared publications - Colin Denniston
Department of Physics and Astronomy, The University of Western Ontario, London, Ontario N6A 3K7, Canada
2 shared publications - Hong Li
Chinese Academy of Sciences
2 shared publications
Latest Publications
- 14 March 2013
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 117 (17) , 8579-8593
Defect Thermodynamics and Diffusion Mechanisms in Li2CO3 and Implications for the Solid Electrolyte Interphase in Li-Ion Batteries
- 14 March 2013
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 117 (17) , 8579-8593
Defect Thermodynamics and Diffusion Mechanisms in Li2CO3 and Implications for the Solid Electrolyte Interphase in Li-Ion Batteries
- 20 February 2013
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 7 (3) , 2717-2724
A Beaded-String Silicon Anode
Interfacial instability is a fundamental issue in heterostructures ranging from biomaterials to joint replacement and electronic packaging. This challenge is particularly intriguing for lithium ion battery anodes comprising silicon as the ion storage material, where ultrahigh capacity is accompanied by vast mechanical stress that threatens delamination of silicon from the current collectors at the other side of the interface. Here, we describe Si-beaded carbon nanotube (CNT) strings whose interface is controlled by chemical functionalization, producing separated amorphous Si beads threaded along mechanically robust and electrically conductive CNT. In situ transmission electron microscopy combined with atomic and continuum modeling reveal that the chemically tailored Si–C interface plays important roles in constraining the Si beads, such that they exhibit a symmetric “radial breathing” around the CNT string, remaining crack-free and electrically connected throughout lithiation–delithiation cycling. These findings provide fundamental insights in controlling nanostructured interfaces to effectively respond to demanding environments such as lithium batteries.
- 20 February 2013
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 7 (3) , 2717-2724
A Beaded-String Silicon Anode
Interfacial instability is a fundamental issue in heterostructures ranging from biomaterials to joint replacement and electronic packaging. This challenge is particularly intriguing for lithium ion battery anodes comprising silicon as the ion storage material, where ultrahigh capacity is accompanied by vast mechanical stress that threatens delamination of silicon from the current collectors at the other side of the interface. Here, we describe Si-beaded carbon nanotube (CNT) strings whose interface is controlled by chemical functionalization, producing separated amorphous Si beads threaded along mechanically robust and electrically conductive CNT. In situ transmission electron microscopy combined with atomic and continuum modeling reveal that the chemically tailored Si–C interface plays important roles in constraining the Si beads, such that they exhibit a symmetric “radial breathing” around the CNT string, remaining crack-free and electrically connected throughout lithiation–delithiation cycling. These findings provide fundamental insights in controlling nanostructured interfaces to effectively respond to demanding environments such as lithium batteries.
- 4 February 2013
- Published by AIP Publishing in Applied Physics Letters
- Vol. 102 (5) , 051912
Oxidation induced softening in Al nanowires
The mechanical properties of metallic nanowires depend dramatically on the atmospheric conditions. Molecular-dynamics simulations with ReaxFF were conducted to study tensile elastic deformation of oxidized Al nanowires. The thin amorphous oxide shell formed around Al nanowires had a very low Young's modulus of 26 GPa, due to its low density and low Al-O coordination. Consequently, for diameters less than 100 nm, the composite Young's modulus of oxide-covered Al nanowires showed a size dependence implying that in this case “smaller is softer.” The model developed also explained the discrepancies in the reported modulus values of nanometer-scale Al thin films.
- 4 February 2013
- Published by AIP Publishing in Applied Physics Letters
- Vol. 102 (5) , 051912
Oxidation induced softening in Al nanowires
The mechanical properties of metallic nanowires depend dramatically on the atmospheric conditions. Molecular-dynamics simulations with ReaxFF were conducted to study tensile elastic deformation of oxidized Al nanowires. The thin amorphous oxide shell formed around Al nanowires had a very low Young's modulus of 26 GPa, due to its low density and low Al-O coordination. Consequently, for diameters less than 100 nm, the composite Young's modulus of oxide-covered Al nanowires showed a size dependence implying that in this case “smaller is softer.” The model developed also explained the discrepancies in the reported modulus values of nanometer-scale Al thin films.
- 5 September 2012
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 134 (37) , 15476-15487
Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase
The mechanism of Li+ transport through the solid electrolyte interphase (SEI), a passivating film on electrode surfaces, has never been clearly elucidated despite its overwhelming importance to Li-ion battery operation and lifetime. The present paper develops a multiscale theoretical methodology to reveal the mechanism of Li+ transport in a SEI film. The methodology incorporates the boundary conditions of the first direct diffusion measurements on a model SEI consisting of porous (outer) organic and dense (inner) inorganic layers (similar to typical SEI films). New experimental evidence confirms that the inner layer in the ∼20 nm thick model SEI is primarily crystalline Li2CO3. Using density functional theory, we first determined that the dominant diffusion carrier in Li2CO3 below the voltage range of SEI formation is excess interstitial Li+. This diffuses via a knock-off mechanism to maintain higher O-coordination, rather than direct-hopping through empty spaces in the Li2CO3 lattice. Mesoscale diffusion equations were then formulated upon a new two-layer/two-mechanism model: pore diffusion in the outer layer and knock-off diffusion in the inner layer. This diffusion model predicted the unusual isotope ratio 6Li+/7Li+ profile measured by TOF-SIMS, which increases from the SEI/electrolyte surface and peaks at a depth of 5 nm, and then gradually decreases within the dense layer. With no fitting parameters, our approach is applicable to model general transport properties, such as ionic conductivity, for SEI films on the surface of other electrodes, from the atomic scale to the mesoscale, as well as aging phenomenon.
- 5 September 2012
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 134 (37) , 15476-15487
Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase
The mechanism of Li+ transport through the solid electrolyte interphase (SEI), a passivating film on electrode surfaces, has never been clearly elucidated despite its overwhelming importance to Li-ion battery operation and lifetime. The present paper develops a multiscale theoretical methodology to reveal the mechanism of Li+ transport in a SEI film. The methodology incorporates the boundary conditions of the first direct diffusion measurements on a model SEI consisting of porous (outer) organic and dense (inner) inorganic layers (similar to typical SEI films). New experimental evidence confirms that the inner layer in the ∼20 nm thick model SEI is primarily crystalline Li2CO3. Using density functional theory, we first determined that the dominant diffusion carrier in Li2CO3 below the voltage range of SEI formation is excess interstitial Li+. This diffuses via a knock-off mechanism to maintain higher O-coordination, rather than direct-hopping through empty spaces in the Li2CO3 lattice. Mesoscale diffusion equations were then formulated upon a new two-layer/two-mechanism model: pore diffusion in the outer layer and knock-off diffusion in the inner layer. This diffusion model predicted the unusual isotope ratio 6Li+/7Li+ profile measured by TOF-SIMS, which increases from the SEI/electrolyte surface and peaks at a depth of 5 nm, and then gradually decreases within the dense layer. With no fitting parameters, our approach is applicable to model general transport properties, such as ionic conductivity, for SEI films on the surface of other electrodes, from the atomic scale to the mesoscale, as well as aging phenomenon.
- 21 November 2011
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 11 (12) , 5494-5500
The Mixing Mechanism during Lithiation of Si Negative Electrode in Li-Ion Batteries: An Ab Initio Molecular Dynamics Study
In order to realize Si as a negative electrode material in commercial Li-ion batteries, it is important to understand the mixing mechanism of Li and Si, and stress evolution during lithiation in Si negative electrode of Li-ion batteries. Available experiments mainly provide the diffusivity of Li in Si as an averaged property, neglecting information regarding diffusivity of Si. However, if Si can diffuse as fast as Li, the stress generated during Li diffusion can be reduced. We, therefore, studied the diffusivity of Li as well as Si atoms in the Si-anode of Li-ion battery using an ab initio molecular dynamics-based methodology. The electrochemical insertion of Li into crystalline Si prompts a crystalline-to-amorphous phase transition. We considered this situation and thus examined the diffusion kinetics of Li and Si atoms in both crystalline and amorphous Si. We find that Li diffuses faster in amorphous Si as compared to crystalline Si, while Si remains relatively immobile in both cases and generates stresses during lithiation. To further understand the mixing mechanism and to relate the structure with electrochemical mixing, we analyzed the evolution of the structure during lithiation and studied the mechanism of breaking of Si–Si network by Li. We find that Li atoms break the Si rings and chains and create ephemeral structures such as stars and boomerangs, which eventually transform to Si–Si dumbbells and isolated Si atoms in the LiSi phase. Our results are found to be in agreement with the available experimental data and provide insights into the mixing mechanism of Li and Si in Si negative electrode of Li-ion batteries.
- 21 November 2011
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 11 (12) , 5494-5500
The Mixing Mechanism during Lithiation of Si Negative Electrode in Li-Ion Batteries: An Ab Initio Molecular Dynamics Study
In order to realize Si as a negative electrode material in commercial Li-ion batteries, it is important to understand the mixing mechanism of Li and Si, and stress evolution during lithiation in Si negative electrode of Li-ion batteries. Available experiments mainly provide the diffusivity of Li in Si as an averaged property, neglecting information regarding diffusivity of Si. However, if Si can diffuse as fast as Li, the stress generated during Li diffusion can be reduced. We, therefore, studied the diffusivity of Li as well as Si atoms in the Si-anode of Li-ion battery using an ab initio molecular dynamics-based methodology. The electrochemical insertion of Li into crystalline Si prompts a crystalline-to-amorphous phase transition. We considered this situation and thus examined the diffusion kinetics of Li and Si atoms in both crystalline and amorphous Si. We find that Li diffuses faster in amorphous Si as compared to crystalline Si, while Si remains relatively immobile in both cases and generates stresses during lithiation. To further understand the mixing mechanism and to relate the structure with electrochemical mixing, we analyzed the evolution of the structure during lithiation and studied the mechanism of breaking of Si–Si network by Li. We find that Li atoms break the Si rings and chains and create ephemeral structures such as stars and boomerangs, which eventually transform to Si–Si dumbbells and isolated Si atoms in the LiSi phase. Our results are found to be in agreement with the available experimental data and provide insights into the mixing mechanism of Li and Si in Si negative electrode of Li-ion batteries.
- 11 June 2010
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 42 (3) , 651-659
The Effect of Solute Atoms on Aluminum Grain Boundary Sliding at Elevated Temperature
- 11 June 2010
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 42 (3) , 651-659
The Effect of Solute Atoms on Aluminum Grain Boundary Sliding at Elevated Temperature
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (5) , A558-A566
Threefold Increase in the Young’s Modulus of Graphite Negative Electrode during Lithium Intercalation
Density functional theory (DFT) is used to reveal that the polycrystalline Young’s modulus (E)(E) of graphite triples as it is lithiated to LiC6LiC6 . This behavior is captured in a linear relationship between EE and lithium concentration suitable for continuum-scale models aimed at predicting diffusion-induced deformation in battery electrode materials. Alternatively, Poisson’s ratio is concentration-independent. Charge-transfer analyses suggest simultaneous weakening of carbon–carbon bonds within graphite basal planes and strengthening of interlayer bonding during lithiation. The variation in bond strength is shown to be responsible for the differences between elasticity tensor components, CijCij , of lithium–graphite intercalation (Li-GIC) phases. Strain accumulation during Li intercalation and deintercalation is examined with a core–shell model of a Li-GIC particle assuming two coexisting phases. The requisite force equilibrium uses different Young’s moduli computed with DFT. Lithium-poor phases develop tensile strains, whereas Li-rich phases develop compressive strains. Results from the core–shell model suggest that elastic strain should be defined relative to the newest phase that forms during lithiation of graphite, and Li concentration-dependent mechanical properties should be considered in continuum level models.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (5) , A558-A566
Threefold Increase in the Young’s Modulus of Graphite Negative Electrode during Lithium Intercalation
Density functional theory (DFT) is used to reveal that the polycrystalline Young’s modulus (E)(E) of graphite triples as it is lithiated to LiC6LiC6 . This behavior is captured in a linear relationship between EE and lithium concentration suitable for continuum-scale models aimed at predicting diffusion-induced deformation in battery electrode materials. Alternatively, Poisson’s ratio is concentration-independent. Charge-transfer analyses suggest simultaneous weakening of carbon–carbon bonds within graphite basal planes and strengthening of interlayer bonding during lithiation. The variation in bond strength is shown to be responsible for the differences between elasticity tensor components, CijCij , of lithium–graphite intercalation (Li-GIC) phases. Strain accumulation during Li intercalation and deintercalation is examined with a core–shell model of a Li-GIC particle assuming two coexisting phases. The requisite force equilibrium uses different Young’s moduli computed with DFT. Lithium-poor phases develop tensile strains, whereas Li-rich phases develop compressive strains. Results from the core–shell model suggest that elastic strain should be defined relative to the newest phase that forms during lithiation of graphite, and Li concentration-dependent mechanical properties should be considered in continuum level models.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (8) , A967-A971
Effects of Concentration-Dependent Elastic Modulus on Diffusion-Induced Stresses for Battery Applications
Most lithium-ion battery electrodes experience large volume changes associated with Li concentration changes within the host particles during charging and discharging. Electrode failure, in the form of fracture or decrepitation, can occur as a result of repeated volume changes. It has been found recently that many electrode materials, such as graphite, Si, and LiFePO4LiFePO4 , change their elastic properties upon lithiation. However, previous diffusion-induced stress (DIS) models have not considered this relationship. In this paper, we developed a mathematical model, with the assumption of a homogeneous isotropic cylindrical electrode particle, to describe the effect of concentration-dependent Young’s modulus on DIS in battery electrodes. The DIS model considers both increasing and decreasing Young’s modulus with concentration. The model shows that the concentration dependence of Young’s modulus has a significant effect on peak stress and stress evolution in the electrodes. Insertion and deinsertion are not symmetric in stress profiles. We conclude that Li stiffening is beneficial to avoid surface cracking during delithiation, and moderate Li softening is beneficial to avoid particle cracking from the center during lithiation.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (8) , A967-A971
Effects of Concentration-Dependent Elastic Modulus on Diffusion-Induced Stresses for Battery Applications
Most lithium-ion battery electrodes experience large volume changes associated with Li concentration changes within the host particles during charging and discharging. Electrode failure, in the form of fracture or decrepitation, can occur as a result of repeated volume changes. It has been found recently that many electrode materials, such as graphite, Si, and LiFePO4LiFePO4 , change their elastic properties upon lithiation. However, previous diffusion-induced stress (DIS) models have not considered this relationship. In this paper, we developed a mathematical model, with the assumption of a homogeneous isotropic cylindrical electrode particle, to describe the effect of concentration-dependent Young’s modulus on DIS in battery electrodes. The DIS model considers both increasing and decreasing Young’s modulus with concentration. The model shows that the concentration dependence of Young’s modulus has a significant effect on peak stress and stress evolution in the electrodes. Insertion and deinsertion are not symmetric in stress profiles. We conclude that Li stiffening is beneficial to avoid surface cracking during delithiation, and moderate Li softening is beneficial to avoid particle cracking from the center during lithiation.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (6) , A741-A747
In Situ Observation of Strains during Lithiation of a Graphite Electrode
The mechanics and microstructure of electrodes are critical in determining the performance and durability of lithium-ion batteries, especially the new large format cells and packs developed for transportation applications. During battery operation, Li diffuses into and out of the electrode particles, causing microstructural changes and deformation-induced degradation. A variety of models have been proposed to interpret these mechanical and microstructural changes, but they have no direct experimental support. We report direct in situ measurements of the microstructural strain in a composite electrode during lithium insertion using a side-by-side cell geometry. The color variation in graphite with Li concentration creates lithium spatial maps. A digital image correlation analysis provides corresponding deformation and strain fields, displaying both dilation and contraction. Through a combination of experimental measurement and theoretical analysis, the unexpected contraction during lithiation is explained by the stiffening of graphite upon lithiation. The result confirms the change in modulus that we recently predicted. Quantification of local strains shows that an increased graphite crystallite volume during lithiation is accommodated primarily by a decrease in the composite (or particle) porosity. The change in porosity can substantially impact battery power; however, this effect has generally been ignored in cell performance models for lithium-ion batteries.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (6) , A741-A747
In Situ Observation of Strains during Lithiation of a Graphite Electrode
The mechanics and microstructure of electrodes are critical in determining the performance and durability of lithium-ion batteries, especially the new large format cells and packs developed for transportation applications. During battery operation, Li diffuses into and out of the electrode particles, causing microstructural changes and deformation-induced degradation. A variety of models have been proposed to interpret these mechanical and microstructural changes, but they have no direct experimental support. We report direct in situ measurements of the microstructural strain in a composite electrode during lithium insertion using a side-by-side cell geometry. The color variation in graphite with Li concentration creates lithium spatial maps. A digital image correlation analysis provides corresponding deformation and strain fields, displaying both dilation and contraction. Through a combination of experimental measurement and theoretical analysis, the unexpected contraction during lithiation is explained by the stiffening of graphite upon lithiation. The result confirms the change in modulus that we recently predicted. Quantification of local strains shows that an increased graphite crystallite volume during lithiation is accommodated primarily by a decrease in the composite (or particle) porosity. The change in porosity can substantially impact battery power; however, this effect has generally been ignored in cell performance models for lithium-ion batteries.
- 15 December 2009
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 106 (12) , 123514
Enhance diamond coating adhesion by oriented interlayer microcracking
In this paper, we report a microcrack toughening mechanism for enhancing the adhesion of diamond coating. The oriented microcracks were formed within the TiC interlayer to dissipate strain energy and accommodate deformation via the crack opening-closing mechanism, thus enhancing the coating/substrate interfacial toughness. The delamination of diamond coating was effectively prevented when the parallel microcracks were confined within the interlayer and arrested at interfaces of coating/interlayer/substrate. Density functional theory calculations revealed that the highly anisotropic fracture strength of the TiC phase energetically favors crack initiation and propagation along (100) planes only, which are 54.7° away from the interface. These microcracks are constrained inside the interlayer by the two strong interfaces in the substrate/interlayer/coating system. The new microcrack toughening mechanism with these combined features has a wide application to enhance the adhesion of thin-film coatings.
- 15 December 2009
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 106 (12) , 123514
Enhance diamond coating adhesion by oriented interlayer microcracking
In this paper, we report a microcrack toughening mechanism for enhancing the adhesion of diamond coating. The oriented microcracks were formed within the TiC interlayer to dissipate strain energy and accommodate deformation via the crack opening-closing mechanism, thus enhancing the coating/substrate interfacial toughness. The delamination of diamond coating was effectively prevented when the parallel microcracks were confined within the interlayer and arrested at interfaces of coating/interlayer/substrate. Density functional theory calculations revealed that the highly anisotropic fracture strength of the TiC phase energetically favors crack initiation and propagation along (100) planes only, which are 54.7° away from the interface. These microcracks are constrained inside the interlayer by the two strong interfaces in the substrate/interlayer/coating system. The new microcrack toughening mechanism with these combined features has a wide application to enhance the adhesion of thin-film coatings.