Heiji Watanabe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Heiji Watanabe has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Takayoshi Shimura
Graduate School of Information, Production and Systems, Waseda University, 2-7 Hibikino, Wakamatsu, Kitakyushu, Fukuoka 808-0135, Japan
9 shared publications - Takuji Hosoi
Osaka University, Suita, Osaka, 565-0871, Japan
5 shared publications Takuji Hosoi
Graduate School of Engineering, Osaka University 1 , 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
3 shared publicationsDaisuke Shimokawa
2 shared publicationsGaku Okamoto
2 shared publications- Hiroaki Arimura2 shared publications
Latest Publications
- 21 September 2016
- Published by IOP Publishing in Applied Physics Express
- Vol. 9 (10) , 101002
Effect of nitrogen incorporation into Al-based gate insulators in AlON/AlGaN/GaN metal–oxide–semiconductor structures
The superior physical and electrical properties of aluminum oxynitride (AlON) gate dielectrics on AlGaN/GaN substrates in terms of thermal stability, reliability, and interface quality were demonstrated by direct AlON deposition and subsequent annealing. Nitrogen incorporation into alumina was proven to be beneficial both for suppressing intermixing at the insulator/AlGaN interface and reducing the number of electrical defects in Al2O3 films. Consequently, we achieved high-quality AlON/AlGaN/GaN metal–oxide–semiconductor capacitors with improved stability against charge injection and a reduced interface state density as low as 1.2 × 1011 cm−2 eV−1. The impact of nitrogen incorporation into the insulator will be discussed on the basis of experimental findings.
- 21 September 2016
- Published by IOP Publishing in Applied Physics Express
- Vol. 9 (10) , 101002
Effect of nitrogen incorporation into Al-based gate insulators in AlON/AlGaN/GaN metal–oxide–semiconductor structures
The superior physical and electrical properties of aluminum oxynitride (AlON) gate dielectrics on AlGaN/GaN substrates in terms of thermal stability, reliability, and interface quality were demonstrated by direct AlON deposition and subsequent annealing. Nitrogen incorporation into alumina was proven to be beneficial both for suppressing intermixing at the insulator/AlGaN interface and reducing the number of electrical defects in Al2O3 films. Consequently, we achieved high-quality AlON/AlGaN/GaN metal–oxide–semiconductor capacitors with improved stability against charge injection and a reduced interface state density as low as 1.2 × 1011 cm−2 eV−1. The impact of nitrogen incorporation into the insulator will be discussed on the basis of experimental findings.
- 25 February 2013
- Published by AIP Publishing in Applied Physics Letters
- Vol. 102 (8) , 083702
Electrical detection of surface plasmon resonance phenomena by a photoelectronic device integrated with gold nanoparticle plasmon antenna
We have proposed a concept of a photoelectronic hybrid device utilizing gold nanoparticles (GNPs), which are supposed to function not only as the plasmon antenna but also as the sensing part. The photocurrent in the fabricated device, consisting of a transparent Nb-doped TiO2 channel and Au electrodes, was enhanced more than eight times at a specific wavelength with GNP arrays located between the electrodes, indicating that surface plasmon resonance was electrically detected with the hybrid device. This result will open new doors for ultra-small biosensor chips integrated with multi-functional solid-state devices.
- 25 February 2013
- Published by AIP Publishing in Applied Physics Letters
- Vol. 102 (8) , 083702
Electrical detection of surface plasmon resonance phenomena by a photoelectronic device integrated with gold nanoparticle plasmon antenna
We have proposed a concept of a photoelectronic hybrid device utilizing gold nanoparticles (GNPs), which are supposed to function not only as the plasmon antenna but also as the sensing part. The photocurrent in the fabricated device, consisting of a transparent Nb-doped TiO2 channel and Au electrodes, was enhanced more than eight times at a specific wavelength with GNP arrays located between the electrodes, indicating that surface plasmon resonance was electrically detected with the hybrid device. This result will open new doors for ultra-small biosensor chips integrated with multi-functional solid-state devices.
- 1 February 2013
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 102, 435-440
The adsorption mechanism of titanium-binding ferritin to amphoteric oxide
- 1 February 2013
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 102, 435-440
The adsorption mechanism of titanium-binding ferritin to amphoteric oxide
- 1 October 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (10S) , 10PE03
Synchrotron Radiation Photoemission Study of Ge3N4/Ge Structures Formed by Plasma Nitridation
- 1 October 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (10S) , 10PE03
Synchrotron Radiation Photoemission Study of Ge3N4/Ge Structures Formed by Plasma Nitridation
- 1 October 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (10) , 10PA02
Impact of Thermally Induced Structural Changes on the Electrical Properties of TiN/HfLaSiO Gate Stacks
- 1 October 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (10) , 10PA02
Impact of Thermally Induced Structural Changes on the Electrical Properties of TiN/HfLaSiO Gate Stacks
- 1 April 2011
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 11 (4) , 2856-2860
Electrical Characteristics of Ge-Based Metal-Insulator-Semiconductor Devices with Ge3N4 Dielectrics Formed by Plasma Nitridation
We have fabricated pure germanium nitrides (Ge3N4) using high-density plasma nitridation and investigated electrical properties of Au/Ge3N4/Ge capacitors. We achieved equivalent oxide thickness (EOT) of 1.4 nm, and dielectric constant of Ge3N4 was estimated to be 9.7. The gate leakage current density of 4.3 A/cm2 in the accumulation condition at V(fb)-1 V, where V(fb) is the flatband voltage, was one order of magnitude lower than that of conventional poly-Si/SiO2/Si stacks. The interface state density (D(it)) of Ge3N4/Ge interfaces evaluated by a low-temperature conductance method exhibited a minimum value of 9.4 x 10(11) cm(-2)eV(-1) at E - E(v) = 0.27 eV. Furthermore, the insulating property and interface quality of Ge3N4/Ge system was found to be thermally stable up to 650 degrees C. These results indicate that Ge3N4 is a promising candidate for either a gate insulator or an interfacial layer under high-k dielectrics for Ge-MIS devices.
- 1 April 2011
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 11 (4) , 2856-2860
Electrical Characteristics of Ge-Based Metal-Insulator-Semiconductor Devices with Ge3N4 Dielectrics Formed by Plasma Nitridation
We have fabricated pure germanium nitrides (Ge3N4) using high-density plasma nitridation and investigated electrical properties of Au/Ge3N4/Ge capacitors. We achieved equivalent oxide thickness (EOT) of 1.4 nm, and dielectric constant of Ge3N4 was estimated to be 9.7. The gate leakage current density of 4.3 A/cm2 in the accumulation condition at V(fb)-1 V, where V(fb) is the flatband voltage, was one order of magnitude lower than that of conventional poly-Si/SiO2/Si stacks. The interface state density (D(it)) of Ge3N4/Ge interfaces evaluated by a low-temperature conductance method exhibited a minimum value of 9.4 x 10(11) cm(-2)eV(-1) at E - E(v) = 0.27 eV. Furthermore, the insulating property and interface quality of Ge3N4/Ge system was found to be thermally stable up to 650 degrees C. These results indicate that Ge3N4 is a promising candidate for either a gate insulator or an interfacial layer under high-k dielectrics for Ge-MIS devices.
- 1 January 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (1) , 10112
Characterization of SiGe Layer during Ge Condensation Process by X-ray Diffraction Methods
We fabricated a Ge-on-insulator (GOI) structure by the Ge condensation method and characterized the SiGe layer during the condensation process by X-ray reciprocal space mapping and synchrotron microbeam X-ray diffraction. The crystalline quality of the SiGe layer degraded during the initial 1 h of oxidation at 1050 °C and it also rapidly degraded during 1 h of oxidation at 900 °C immediately before the formation of GOI structures. The slight degradation was caused by annealing in Ar, indicating that the degradation during the initial 1-h condensation is accelerated by Ge atoms being ejected from the oxidized interface.
- 1 January 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (1) , 10112
Characterization of SiGe Layer during Ge Condensation Process by X-ray Diffraction Methods
We fabricated a Ge-on-insulator (GOI) structure by the Ge condensation method and characterized the SiGe layer during the condensation process by X-ray reciprocal space mapping and synchrotron microbeam X-ray diffraction. The crystalline quality of the SiGe layer degraded during the initial 1 h of oxidation at 1050 °C and it also rapidly degraded during 1 h of oxidation at 900 °C immediately before the formation of GOI structures. The slight degradation was caused by annealing in Ar, indicating that the degradation during the initial 1-h condensation is accelerated by Ge atoms being ejected from the oxidized interface.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (10) , H977-H981
Thermal Stability and Electron Irradiation Damage of Ordered Structure in the Thermal Oxide Layer on Si
We investigated the thermal stability and the electron irradiation damage of the ordered structure in the thermal oxide layer on Si substrates. The diffraction peak from the ordered SiO2SiO2 shifted to the lower angle side, and the intensity decreased after thermal annealing above 950°C950°C , indicating the decrease in density and the disordering of the structure. The least-squares fitting analysis assuming the quasi-amorphous structure showed that the ordered SiO2SiO2 was relatively stable at the SiO2/SiSiO2/Si interface and the root-mean-square displacement of the atoms at the interface was 0.22 nm. The ordered structure was also degraded by electron irradiation at a dose of less than 6.6C/cm26.6C/cm2 .
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (10) , H977-H981
Thermal Stability and Electron Irradiation Damage of Ordered Structure in the Thermal Oxide Layer on Si
We investigated the thermal stability and the electron irradiation damage of the ordered structure in the thermal oxide layer on Si substrates. The diffraction peak from the ordered SiO2SiO2 shifted to the lower angle side, and the intensity decreased after thermal annealing above 950°C950°C , indicating the decrease in density and the disordering of the structure. The least-squares fitting analysis assuming the quasi-amorphous structure showed that the ordered SiO2SiO2 was relatively stable at the SiO2/SiSiO2/Si interface and the root-mean-square displacement of the atoms at the interface was 0.22 nm. The ordered structure was also degraded by electron irradiation at a dose of less than 6.6C/cm26.6C/cm2 .
- 1 July 2008
- Published by Elsevier in Applied Surface Science
- Vol. 254 (19) , 6119-6122
Structural optimization of HfTiSiO high-k gate dielectrics by utilizing in-situ PVD-based fabrication method
- 1 July 2008
- Published by Elsevier in Applied Surface Science
- Vol. 254 (19) , 6119-6122
Structural optimization of HfTiSiO high-k gate dielectrics by utilizing in-situ PVD-based fabrication method
- Open Access
- 12 January 2007
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 8 (3) , 219-224
Interface reactions at TiN/HfSiON gate stacks: Dependence on the electrode structure and deposition method
We systematically investigated intrinsic and extrinsic thermal reactions at TiN/HfSiON gate stacks. The formation of an ultrathin TiO2 interlayer was found to be an intrinsic reaction at the metal/insulator interface, but growth of SiO2 underlayers between HfSiON and Si substrates, which determines the electrical thickness of metal-oxide-semiconductor (MOS) devices, depends on the structure and deposition method of the gate electrodes. Physical vapor deposition (PVD) grown TiN electrodes covered with W overlayers exhibited excellent thermal stability at up to 1000 °C. Formation of ultrathin TiO2 interlayers reduced gate leakage current (Ig), and growth of the oxide underlayer was suppressed by less than a few angstroms even for 1000 °C annealing. In contrast, we found that halogen impurities within CVD-grown metal electrodes enhance interface SiO2 growth, resulting in deterioration of equivalent oxide thickness (EOT) versus Ig characteristics of the gate stacks.
- 12 January 2007
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 8 (3) , 219-224
Open AccessInterface reactions at TiN/HfSiON gate stacks: Dependence on the electrode structure and deposition method
We systematically investigated intrinsic and extrinsic thermal reactions at TiN/HfSiON gate stacks. The formation of an ultrathin TiO2 interlayer was found to be an intrinsic reaction at the metal/insulator interface, but growth of SiO2 underlayers between HfSiON and Si substrates, which determines the electrical thickness of metal-oxide-semiconductor (MOS) devices, depends on the structure and deposition method of the gate electrodes. Physical vapor deposition (PVD) grown TiN electrodes covered with W overlayers exhibited excellent thermal stability at up to 1000 °C. Formation of ultrathin TiO2 interlayers reduced gate leakage current (Ig), and growth of the oxide underlayer was suppressed by less than a few angstroms even for 1000 °C annealing. In contrast, we found that halogen impurities within CVD-grown metal electrodes enhance interface SiO2 growth, resulting in deterioration of equivalent oxide thickness (EOT) versus Ig characteristics of the gate stacks.