Nikos. G. Tsierkezos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nikos. G. Tsierkezos has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
Uwe Ritter
Institut für Chemie, Fachgebiet Chemie, Fakultät für Mathematik und Naturwissenschaften, Technische Universität Ilmenau, Ilmenau, Germany
39 shared publications- Paweł Szroeder
Faculty of Physics, Kazimierz Wielki University, Powstancow Wielkopolskich 2, 85-090 Bydgoszcz, Poland
7 shared publications Nora Wetzold
Institute for Print and Media Technology , Chemnitz University of Technology , Chemnitz , Germany
5 shared publicationsShereen Haj Othman
Ilmenau University of Technology
5 shared publicationsClive Downing
Univ Dublin Trinity Coll, Adv Microscopy Lab, CRANN, Dublin 2, Ireland
4 shared publications- Andrea Knauer
Ilmenau University of Technology
3 shared publications
Latest Publications
- Open Access
Synthesis and Structural and Electrochemical Characterization of Carbon Fiber/MnO2 Composites for Hydrogen Storage and Electrochemical Sensing
Hydrogen, as an alternative energy carrier, presents significant prospects for the transition to more environmentally friendly energy solutions. However, its efficient and safe storage remains a challenge, as materials with high adsorbent capacity and long-term storage capability are required. This study focuses on the synthesis and characterization of a composite material comprising carbon fiber and manganese dioxide (MnO2/CFs), for the purpose of hydrogen storage. Carbon fiber was chosen as the basis for the composition of the composite material due to its large active surface area and its excellent mechanical, thermal, and electrochemical properties. The deposition of MnO2 on the surface of carbon fibers took place through two different synthetic pathways: electrochemical deposition and chemical synthesis under different conditions. The electrochemical method enabled the production of a greater amount of oxide with optimized structural and chemical properties, whereas the chemical method was simpler but required more time to achieve comparable or lower-capacity performance. Elemental analysis of the electrochemically produced composites showcased an average of 40.5 ± 0.05 wt% Mn presence, which is an indicator of the quantity of MnO2 on the surface responsible for hydrogen storage, while the chemically produced composites showcased an average of 7.6 ± 0.05 wt% Mn presence. Manganese oxide’s high specific capacity and reversible redox reaction participation make it suitable for hydrogen storage applications. The obtained results of the hydrogenated samples through physicochemical characterization indicated the formation of the MnOOH intermediate. Regarding these findings it may be remarked that carbon fiber/MnO2 composites are promising candidates for hydrogen storage technologies. Finally, the fabricated carbon fiber/MnO2 composites were applied successfully as working electrodes for analysis of the [Fe(CN)6]3−/4− redox system in aqueous KCl solutions.
Open AccessSynthesis and Structural and Electrochemical Characterization of Carbon Fiber/MnO2 Composites for Hydrogen Storage and Electrochemical Sensing
Hydrogen, as an alternative energy carrier, presents significant prospects for the transition to more environmentally friendly energy solutions. However, its efficient and safe storage remains a challenge, as materials with high adsorbent capacity and long-term storage capability are required. This study focuses on the synthesis and characterization of a composite material comprising carbon fiber and manganese dioxide (MnO2/CFs), for the purpose of hydrogen storage. Carbon fiber was chosen as the basis for the composition of the composite material due to its large active surface area and its excellent mechanical, thermal, and electrochemical properties. The deposition of MnO2 on the surface of carbon fibers took place through two different synthetic pathways: electrochemical deposition and chemical synthesis under different conditions. The electrochemical method enabled the production of a greater amount of oxide with optimized structural and chemical properties, whereas the chemical method was simpler but required more time to achieve comparable or lower-capacity performance. Elemental analysis of the electrochemically produced composites showcased an average of 40.5 ± 0.05 wt% Mn presence, which is an indicator of the quantity of MnO2 on the surface responsible for hydrogen storage, while the chemically produced composites showcased an average of 7.6 ± 0.05 wt% Mn presence. Manganese oxide’s high specific capacity and reversible redox reaction participation make it suitable for hydrogen storage applications. The obtained results of the hydrogenated samples through physicochemical characterization indicated the formation of the MnOOH intermediate. Regarding these findings it may be remarked that carbon fiber/MnO2 composites are promising candidates for hydrogen storage technologies. Finally, the fabricated carbon fiber/MnO2 composites were applied successfully as working electrodes for analysis of the [Fe(CN)6]3−/4− redox system in aqueous KCl solutions.
- Open Access
- 9 December 2025
- Published by MDPI AG in Preprints.org
Synthesis, Structural and Electrochemical Characterization of Carbon Fiber/MnO2 Composites for Hydrogen Storage
Hydrogen, as an alternative energy carrier, presents significant prospects for the transition to more environmentally friendly energy solutions. However, its efficient and safe storage remains a challenge, as materials with high adsorbent capacity and long-term storage capability are required. This study focuses on the synthesis and characterization of a composite material consisting of carbon fiber and manganese dioxide (MnO2/CFs), for the purpose of storing hydrogen. Carbon fiber was chosen as the basis for the composition of the composite material due to its large active surface area and its excellent mechanical, thermal, and electrochemical properties. The deposition of MnO2 on the surface of carbon fibers took place through two different synthetic pathways: electrochemical deposition and chemical synthesis under different conditions. The electrochemical method allowed the development of oxide in more quantity, with optimized structural and chemical properties, while the chemical method had a more basic application but required more time to showcase same or less capacity performance. The elemental analysis of the electrochemically produced composites showcased an average of 40.60 wt% Mn presence, which is an indicator of the quantity of MnO2 on the surface responsible for hydrogen storage, while the chemically produced showcased an average of 4.21 wt% Mn presence. Manganese oxide’s high specific capacity and reversible redox reaction participation make it suitable for hydrogen storage applications. The obtained results of the hydrogenated samples through physicochemical characterization indicated the formation of the MnOOH intermediate. These findings may be remarked that carbon fiber/MnO2 composites are promising candidates for hydrogen storage technologies. Finally, the fabricated carbon fiber/MnO2 composites were applied successfully as working electrodes for analysis of [Fe(CN)6]3-/4- redox system in aqueous KCl solutions.
- 9 December 2025
- Published by MDPI AG in Preprints.org
Open AccessSynthesis, Structural and Electrochemical Characterization of Carbon Fiber/MnO2 Composites for Hydrogen Storage
Hydrogen, as an alternative energy carrier, presents significant prospects for the transition to more environmentally friendly energy solutions. However, its efficient and safe storage remains a challenge, as materials with high adsorbent capacity and long-term storage capability are required. This study focuses on the synthesis and characterization of a composite material consisting of carbon fiber and manganese dioxide (MnO2/CFs), for the purpose of storing hydrogen. Carbon fiber was chosen as the basis for the composition of the composite material due to its large active surface area and its excellent mechanical, thermal, and electrochemical properties. The deposition of MnO2 on the surface of carbon fibers took place through two different synthetic pathways: electrochemical deposition and chemical synthesis under different conditions. The electrochemical method allowed the development of oxide in more quantity, with optimized structural and chemical properties, while the chemical method had a more basic application but required more time to showcase same or less capacity performance. The elemental analysis of the electrochemically produced composites showcased an average of 40.60 wt% Mn presence, which is an indicator of the quantity of MnO2 on the surface responsible for hydrogen storage, while the chemically produced showcased an average of 4.21 wt% Mn presence. Manganese oxide’s high specific capacity and reversible redox reaction participation make it suitable for hydrogen storage applications. The obtained results of the hydrogenated samples through physicochemical characterization indicated the formation of the MnOOH intermediate. These findings may be remarked that carbon fiber/MnO2 composites are promising candidates for hydrogen storage technologies. Finally, the fabricated carbon fiber/MnO2 composites were applied successfully as working electrodes for analysis of [Fe(CN)6]3-/4- redox system in aqueous KCl solutions.
- Open Access
- 30 November 2024
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 29 (5) , 1945-1961
Multi‐walled carbon nanotubes co‐doped with sulfur and nitrogen as sensors for the simultaneous electrochemical determination of biomolecules
Multi-walled carbon nanotubes co-doped with sulfur and nitrogen (S–N-MWCNTs) were produced onto silicon/silicon oxide by means of chemical vapor deposition (CVD) upon decomposition of dimethyl sulfoxide (DMSO) and acetonitrile (ACN) in the presence of ferrocene (FeCp2). The synthesized S–N-MWCNTs were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and electrochemical impedance spectroscopy (EIS). The electrochemical response of S–N-MWCNTs towards oxidation of ascorbic acid (AA), dopamine (DA), uric acid (UA), and glucose (GL) was investigated in phosphate buffer solution (PBS) (pH 7.4) by means of cyclic voltammetry (CV). Strong dependence of electrochemical quality of S–N-MWCNTs on the concentration of decomposed DMSO precursor was observed. Namely, upon increasing the percentage of decayed DMSO from 1.0 up to 2.0% wt., the electrocatalytic activity of S–N-MWCNTs tends to improve. The separations of oxidation waves between AA-DA, DA-UA, and AA-UA reached their maximum values on S–N-MWCNTs-3, fabricated upon decomposition of 2.0% wt. DMSO precursor, permitting their individual and simultaneous electrochemical determination. Strong interference of GL in the analysis of DA was observed, and consequently, simultaneous analysis of AA, DA, and UA can be only carried out in the absence of GL. A great influence of concentration of decomposed DMSO precursor on the sensitivity of S–N-MWCNTs was also observed. Specifically, upon increasing the percentage of decayed DMSO from 1.0 up to 2.0% wt., the sensitivity and detection capability of S–N-MWCNTs towards AA, DA, UA, and GL analytes tend to enhance.
- 30 November 2024
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 29 (5) , 1945-1961
Open AccessMulti‐walled carbon nanotubes co‐doped with sulfur and nitrogen as sensors for the simultaneous electrochemical determination of biomolecules
Multi-walled carbon nanotubes co-doped with sulfur and nitrogen (S–N-MWCNTs) were produced onto silicon/silicon oxide by means of chemical vapor deposition (CVD) upon decomposition of dimethyl sulfoxide (DMSO) and acetonitrile (ACN) in the presence of ferrocene (FeCp2). The synthesized S–N-MWCNTs were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and electrochemical impedance spectroscopy (EIS). The electrochemical response of S–N-MWCNTs towards oxidation of ascorbic acid (AA), dopamine (DA), uric acid (UA), and glucose (GL) was investigated in phosphate buffer solution (PBS) (pH 7.4) by means of cyclic voltammetry (CV). Strong dependence of electrochemical quality of S–N-MWCNTs on the concentration of decomposed DMSO precursor was observed. Namely, upon increasing the percentage of decayed DMSO from 1.0 up to 2.0% wt., the electrocatalytic activity of S–N-MWCNTs tends to improve. The separations of oxidation waves between AA-DA, DA-UA, and AA-UA reached their maximum values on S–N-MWCNTs-3, fabricated upon decomposition of 2.0% wt. DMSO precursor, permitting their individual and simultaneous electrochemical determination. Strong interference of GL in the analysis of DA was observed, and consequently, simultaneous analysis of AA, DA, and UA can be only carried out in the absence of GL. A great influence of concentration of decomposed DMSO precursor on the sensitivity of S–N-MWCNTs was also observed. Specifically, upon increasing the percentage of decayed DMSO from 1.0 up to 2.0% wt., the sensitivity and detection capability of S–N-MWCNTs towards AA, DA, UA, and GL analytes tend to enhance.
- 21 August 2023
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 31 (11) , 1082-1095
Synthesis and electrochemical properties of sulfur-nitrogen-doped multi-walled carbon nanotubes
- 21 August 2023
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 31 (11) , 1082-1095
Synthesis and electrochemical properties of sulfur-nitrogen-doped multi-walled carbon nanotubes
- 8 June 2023
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 27 (10) , 2645-2658
Application of nitrogen-doped multi-walled carbon nanotubes decorated with gold nanoparticles in biosensing
- 8 June 2023
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 27 (10) , 2645-2658
Application of nitrogen-doped multi-walled carbon nanotubes decorated with gold nanoparticles in biosensing
- 1 October 2018
- Published by Elsevier in Toxicology in Vitro
- Vol. 52, 122-130
Single-walled carbon nanotubes affect the expression of genes associated with immune response in normal human astrocytes
- 1 October 2018
- Published by Elsevier in Toxicology in Vitro
- Vol. 52, 122-130
Single-walled carbon nanotubes affect the expression of genes associated with immune response in normal human astrocytes
- 9 March 2017
- Published by Springer Nature in Ionics
- Vol. 23 (8) , 2025-2035
Synthesis and electrochemical characterization of nitrogen-doped and nitrogen–phosphorus-doped multi-walled carbon nanotubes
- 9 March 2017
- Published by Springer Nature in Ionics
- Vol. 23 (8) , 2025-2035
Synthesis and electrochemical characterization of nitrogen-doped and nitrogen–phosphorus-doped multi-walled carbon nanotubes
- 7 April 2016
- Published by Springer Nature in Ionics
- Vol. 22 (10) , 1957-1965
Electrochemical response of nitrogen-doped multi-walled carbon nanotubes decorated with gold and iridium nanoparticles toward ferrocyanide/ferricyanide redox system
- 7 April 2016
- Published by Springer Nature in Ionics
- Vol. 22 (10) , 1957-1965
Electrochemical response of nitrogen-doped multi-walled carbon nanotubes decorated with gold and iridium nanoparticles toward ferrocyanide/ferricyanide redox system
- 1 October 2015
- Published by Elsevier in Chemical Physics Letters
- Vol. 639, 217-224
Properties and electrochemical characteristics of boron-doped multi-walled carbon nanotubes
- 1 October 2015
- Published by Elsevier in Chemical Physics Letters
- Vol. 639, 217-224
Properties and electrochemical characteristics of boron-doped multi-walled carbon nanotubes
- 6 August 2015
- Published by Springer Nature in Microchimica Acta
- Vol. 183 (1) , 35-47
Multi-walled carbon nanotubes doped with boron as an electrode material for electrochemical studies on dopamine, uric acid, and ascorbic acid
- 6 August 2015
- Published by Springer Nature in Microchimica Acta
- Vol. 183 (1) , 35-47
Multi-walled carbon nanotubes doped with boron as an electrode material for electrochemical studies on dopamine, uric acid, and ascorbic acid