Thomas Wallner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Thomas Wallner has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Riccardo Scarcelli
Argonne National Laboratory , Lemont, IL 60439
3 shared publications - Scott A. Miers
Michigan Technological University
3 shared publications - Michael Pamminger
Mechanical, Materials and Aerospace Engineering, Illinois Institute of Technology, Chicago, IL 60616
2 shared publications - Andrew Ickes
Argonne National Laboratory
1 shared publication - Anqi Zhang
Energy Systems Division, Argonne National Laboratory, Lemont, IL 60439
1 shared publication - Brad Boyer
Ford Motor Company, Dearborn, MI 48124
1 shared publication
Latest Publications
- 5 June 2019
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (9)
Development of a Hybrid Lagrangian–Eulerian Model to Describe Spark-Ignition Processes at Engine-Like Turbulent Flow Conditions
With the engine technology moving toward more challenging (highly dilute and boosted) operation, spark-ignition processes play a key role in determining flame propagation and completeness of the combustion process. On the computational side, there is plenty of spark-ignition models available in literature and validated under conventional, stoichiometric spark ignition (SI) operation. Nevertheless, these models need to be expanded and developed on more physical grounds since at challenging operation they are not truly predictive. This paper reports on the development of a dedicated model for the spark-ignition event at nonquiescent, engine-like conditions, performed in the commercial CFD code converge. The developed methodology leverages previous findings that have expanded the use and improved the accuracy of Eulerian-type energy deposition models. In this work, the Eulerian energy deposition is coupled at every computational time-step with a Lagrangian-type evolution of the spark channel. Typical features such as spark channel elongation, stretch, and attachment to the electrodes are properly described to deliver realistic energy deposition along the channel during the entire ignition process. The numerical results are validated against schlieren images from an optical constant volume chamber and show the improvement in the simulation of the spark channel during the entire ignition event, with respect to the most commonly used energy deposition approach. Further developmental pathways are discussed to provide more physics-based features from the developed ignition model in the future.
- 5 June 2019
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (9)
Development of a Hybrid Lagrangian–Eulerian Model to Describe Spark-Ignition Processes at Engine-Like Turbulent Flow Conditions
With the engine technology moving toward more challenging (highly dilute and boosted) operation, spark-ignition processes play a key role in determining flame propagation and completeness of the combustion process. On the computational side, there is plenty of spark-ignition models available in literature and validated under conventional, stoichiometric spark ignition (SI) operation. Nevertheless, these models need to be expanded and developed on more physical grounds since at challenging operation they are not truly predictive. This paper reports on the development of a dedicated model for the spark-ignition event at nonquiescent, engine-like conditions, performed in the commercial CFD code converge. The developed methodology leverages previous findings that have expanded the use and improved the accuracy of Eulerian-type energy deposition models. In this work, the Eulerian energy deposition is coupled at every computational time-step with a Lagrangian-type evolution of the spark channel. Typical features such as spark channel elongation, stretch, and attachment to the electrodes are properly described to deliver realistic energy deposition along the channel during the entire ignition process. The numerical results are validated against schlieren images from an optical constant volume chamber and show the improvement in the simulation of the spark channel during the entire ignition event, with respect to the most commonly used energy deposition approach. Further developmental pathways are discussed to provide more physics-based features from the developed ignition model in the future.
- 6 August 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 140 (12)
Influence of Charge Motion and Compression Ratio on the Performance of a Combustion Concept Employing In-Cylinder Gasoline and Natural Gas Blending
The present paper represents a small piece of an extensive experimental effort investigating the dual-fuel operation of a light-duty spark ignited engine. Natural gas (NG) was directly injected into the cylinder and gasoline was injected into the intake-port. Direct injection (DI) of NG was used in order to overcome the power density loss usually experienced with NG port-fuel injection (PFI) as it allows an injection after intake valve closing. Having two separate fuel systems allows for a continuum of in-cylinder blend levels from pure gasoline to pure NG operation. The huge benefit of gasoline is its availability and energy density, whereas NG allows efficient operation at high load due to improved combustion phasing enabled by its higher knock resistance. Furthermore, using NG allowed a reduction of carbon dioxide emissions across the entire engine map due to the higher hydrogen-to-carbon ratio. Exhaust gas recirculation (EGR) was used to (a) increase efficiency at low and part-load operation and (b) reduce the propensity of knock at higher compression ratios (CRs) thereby enabling blend levels with greater amount of gasoline across a wider operating range. Two integral engine parameters, CR and in-cylinder turbulence levels, were varied in order to study their influence on efficiency, emissions, and performance over a specific speed and load range. Increasing the CR from 10.5 to 14.5 allowed an absolute increase in indicated thermal efficiency of more than 3% for 75% NG (25% gasoline) operation at 8 bar net indicated mean effective pressure (IMEP) and 2500 rpm. However, as anticipated, the achievable peak load at CR 14.5 with 100% gasoline was greatly reduced due to its lower knock resistance. The in-cylinder turbulence level was varied by means of tumble plates (TPs) as well as an insert for the NG injector that guides the injection “spray” to augment the tumble motion. The usage of TPs showed a significant increase in EGR dilution tolerance for pure gasoline operation, however, no such impact was found for blended operation of gasoline and NG.
- 6 August 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 140 (12)
Influence of Charge Motion and Compression Ratio on the Performance of a Combustion Concept Employing In-Cylinder Gasoline and Natural Gas Blending
The present paper represents a small piece of an extensive experimental effort investigating the dual-fuel operation of a light-duty spark ignited engine. Natural gas (NG) was directly injected into the cylinder and gasoline was injected into the intake-port. Direct injection (DI) of NG was used in order to overcome the power density loss usually experienced with NG port-fuel injection (PFI) as it allows an injection after intake valve closing. Having two separate fuel systems allows for a continuum of in-cylinder blend levels from pure gasoline to pure NG operation. The huge benefit of gasoline is its availability and energy density, whereas NG allows efficient operation at high load due to improved combustion phasing enabled by its higher knock resistance. Furthermore, using NG allowed a reduction of carbon dioxide emissions across the entire engine map due to the higher hydrogen-to-carbon ratio. Exhaust gas recirculation (EGR) was used to (a) increase efficiency at low and part-load operation and (b) reduce the propensity of knock at higher compression ratios (CRs) thereby enabling blend levels with greater amount of gasoline across a wider operating range. Two integral engine parameters, CR and in-cylinder turbulence levels, were varied in order to study their influence on efficiency, emissions, and performance over a specific speed and load range. Increasing the CR from 10.5 to 14.5 allowed an absolute increase in indicated thermal efficiency of more than 3% for 75% NG (25% gasoline) operation at 8 bar net indicated mean effective pressure (IMEP) and 2500 rpm. However, as anticipated, the achievable peak load at CR 14.5 with 100% gasoline was greatly reduced due to its lower knock resistance. The in-cylinder turbulence level was varied by means of tumble plates (TPs) as well as an insert for the NG injector that guides the injection “spray” to augment the tumble motion. The usage of TPs showed a significant increase in EGR dilution tolerance for pure gasoline operation, however, no such impact was found for blended operation of gasoline and NG.
- 24 May 2016
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 138 (11) , 112807
Extending Lean and Exhaust Gas Recirculation-Dilute Operating Limits of a Modern Gasoline Direct-Injection Engine Using a Low-Energy Transient Plasma Ignition System
The efficiency improvement and emissions reduction potential of lean and exhaust gas recirculation (EGR)-dilute operation of spark-ignition gasoline engines is well understood and documented. However, dilute operation is generally limited by deteriorating combustion stability with increasing inert gas levels. The combustion stability decreases due to reduced mixture flame speeds resulting in significantly increased combustion initiation periods and burn durations. A study was designed and executed to evaluate the potential to extend lean and EGR-dilute limits using a low-energy transient plasma ignition system. The low-energy transient plasma was generated by nanosecond pulses and its performance compared to a conventional transistorized coil ignition (TCI) system operated on an automotive, gasoline direct-injection (GDI) single-cylinder research engine. The experimental assessment was focused on steady-state experiments at the part load condition of 1500 rpm 5.6 bar indicated mean effective pressure (IMEP), where dilution tolerance is particularly critical to improving efficiency and emission performance. Experimental results suggest that the energy delivery process of the low-energy transient plasma ignition system significantly improves part load dilution tolerance by reducing the early flame development period. Statistical analysis of relevant combustion metrics was performed in order to further investigate the effects of the advanced ignition system on combustion stability. Results confirm that at select operating conditions EGR tolerance and lean limit could be improved by as much as 20% (from 22.7 to 27.1% EGR) and nearly 10% (from λ = 1.55 to 1.7) with the low-energy transient plasma ignition system.
- 24 May 2016
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 138 (11) , 112807
Extending Lean and Exhaust Gas Recirculation-Dilute Operating Limits of a Modern Gasoline Direct-Injection Engine Using a Low-Energy Transient Plasma Ignition System
The efficiency improvement and emissions reduction potential of lean and exhaust gas recirculation (EGR)-dilute operation of spark-ignition gasoline engines is well understood and documented. However, dilute operation is generally limited by deteriorating combustion stability with increasing inert gas levels. The combustion stability decreases due to reduced mixture flame speeds resulting in significantly increased combustion initiation periods and burn durations. A study was designed and executed to evaluate the potential to extend lean and EGR-dilute limits using a low-energy transient plasma ignition system. The low-energy transient plasma was generated by nanosecond pulses and its performance compared to a conventional transistorized coil ignition (TCI) system operated on an automotive, gasoline direct-injection (GDI) single-cylinder research engine. The experimental assessment was focused on steady-state experiments at the part load condition of 1500 rpm 5.6 bar indicated mean effective pressure (IMEP), where dilution tolerance is particularly critical to improving efficiency and emission performance. Experimental results suggest that the energy delivery process of the low-energy transient plasma ignition system significantly improves part load dilution tolerance by reducing the early flame development period. Statistical analysis of relevant combustion metrics was performed in order to further investigate the effects of the advanced ignition system on combustion stability. Results confirm that at select operating conditions EGR tolerance and lean limit could be improved by as much as 20% (from 22.7 to 27.1% EGR) and nearly 10% (from λ = 1.55 to 1.7) with the low-energy transient plasma ignition system.
- 1 January 2013
- Published by Springer Nature
- p. 629-666
Internal Combustion Engines, Alternative Fuels for
- 1 January 2013
- Published by Springer Nature
- p. 629-666
Internal Combustion Engines, Alternative Fuels for
- 9 November 2012
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 227 (1) , 99-109
Evaluation of the efficiency and the drive cycle emissions for a hydrogen direct-injection engine
Hydrogen is seen as a sustainable energy carrier for transportation because it can be generated using renewable energy sources and it is a favorable fuel for clean vehicle powertrains. Hydrogen internal-combustion engines have been identified as a cost-effective consumer of hydrogen in the near term to aid in the development of a large-scale hydrogen infrastructure. Current research on hydrogen internal-combustion engines is directed by a series of efficiency and emissions targets defined by the US Department of Energy including a peak brake thermal efficiency of 45% and nitrogen oxide emissions of less than 0.07 g/mile. A high-efficiency hydrogen direct-injection engine was developed at Argonne National Laboratory to take advantage of the combustion characteristics of hydrogen. The engine employs a lean control strategy with turbocharging for power density comparable with that of gasoline engines. The injection strategy was optimized through collaborative three-dimensional computational fluid dynamics and experimental efforts to achieve mixture stratification that is beneficial for both a high efficiency and low nitrogen oxide emissions. The efficiency maps of the hydrogen engine demonstrate a peak brake thermal efficiency of 45.5% together with nitrogen oxide maps showing emissions of less than 0.10 g/kW h in much of the operating regime. In order to evaluate the driving-cycle nitrogen oxide emissions, the engine maps were fed into a vehicle simulation assuming a midsize sedan with a conventional (non-hybrid) powertrain. With a 3.0 l hydrogen engine, nitrogen oxide emissions from a Urban Dynamometer Driving Schedule cycle are 0.017 g/mile which fulfills the project goal and are even sufficiently low to meet the Super-Ultra-Low-Emissions Vehicle II emissions specification. The city or highway fuel economy, normalized to gallons of gasoline, is 32.4/51.5 mile/gal(US) for a combined average of 38.9 mile/gal(US), exceeding the 2016 Corporate Average Fuel Economy standard. Further vehicle simulations were performed to show the effect of engine downsizing. With a smaller 2.0 l engine, nitrogen oxide emissions increase to 0.028 g/mile, which still exceeds the US Department of Energy target together with the benefit of a fuel economy improvement to 45.4 mile/gal(US) (combined).
- 9 November 2012
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 227 (1) , 99-109
Evaluation of the efficiency and the drive cycle emissions for a hydrogen direct-injection engine
Hydrogen is seen as a sustainable energy carrier for transportation because it can be generated using renewable energy sources and it is a favorable fuel for clean vehicle powertrains. Hydrogen internal-combustion engines have been identified as a cost-effective consumer of hydrogen in the near term to aid in the development of a large-scale hydrogen infrastructure. Current research on hydrogen internal-combustion engines is directed by a series of efficiency and emissions targets defined by the US Department of Energy including a peak brake thermal efficiency of 45% and nitrogen oxide emissions of less than 0.07 g/mile. A high-efficiency hydrogen direct-injection engine was developed at Argonne National Laboratory to take advantage of the combustion characteristics of hydrogen. The engine employs a lean control strategy with turbocharging for power density comparable with that of gasoline engines. The injection strategy was optimized through collaborative three-dimensional computational fluid dynamics and experimental efforts to achieve mixture stratification that is beneficial for both a high efficiency and low nitrogen oxide emissions. The efficiency maps of the hydrogen engine demonstrate a peak brake thermal efficiency of 45.5% together with nitrogen oxide maps showing emissions of less than 0.10 g/kW h in much of the operating regime. In order to evaluate the driving-cycle nitrogen oxide emissions, the engine maps were fed into a vehicle simulation assuming a midsize sedan with a conventional (non-hybrid) powertrain. With a 3.0 l hydrogen engine, nitrogen oxide emissions from a Urban Dynamometer Driving Schedule cycle are 0.017 g/mile which fulfills the project goal and are even sufficiently low to meet the Super-Ultra-Low-Emissions Vehicle II emissions specification. The city or highway fuel economy, normalized to gallons of gasoline, is 32.4/51.5 mile/gal(US) for a combined average of 38.9 mile/gal(US), exceeding the 2016 Corporate Average Fuel Economy standard. Further vehicle simulations were performed to show the effect of engine downsizing. With a smaller 2.0 l engine, nitrogen oxide emissions increase to 0.028 g/mile, which still exceeds the US Department of Energy target together with the benefit of a fuel economy improvement to 45.4 mile/gal(US) (combined).
- 7 November 2012
- Published by Springer Nature
- p. 15-26
Analytical Assessment of C2–C8 Alcohols as Spark-Ignition Engine Fuels
- 7 November 2012
- Published by Springer Nature
- p. 15-26
Analytical Assessment of C2–C8 Alcohols as Spark-Ignition Engine Fuels
- 1 January 2012
- Published by Springer Nature
- p. 5461-5499
Internal Combustion Engines, Alternative Fuels for
- 1 January 2012
- Published by Springer Nature
- p. 5461-5499
Internal Combustion Engines, Alternative Fuels for
- 11 April 2011
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 133 (8) , 082801
Correlation Between Speciated Hydrocarbon Emissions and Flame Ionization Detector Response for Gasoline/Alcohol Blends
The U.S. renewable fuel standard has made it a requirement to increase the production of ethanol and advanced biofuels to 36 billion by 2022. Ethanol will be capped at 15 billion, which leaves 21 billion to come from other sources such as butanol. Butanol has a higher energy density and lower affinity for water than ethanol. Moreover, alcohol fueled engines in general have been shown to positively affect engine-out emissions of oxides of nitrogen and carbon monoxide compared with their gasoline fueled counterparts. In light of these developments, the variety and blend levels of oxygenated constituents is likely to increase in the foreseeable future. The effect on engine-out emissions for total hydrocarbons is less clear due to the relative insensitivity of the flame ionization detector (FID) toward alcohols and aldehydes. It is well documented that hydrocarbon (HC) measurement using a conventional FID in the presence of oxygenates in the engine exhaust stream can lead to a misinterpretation of HC emissions trends for alcohol fuel blends. Characterization of the exhaust stream for all expected hydrocarbon constituents is required to accurately determine the actual concentration of unburned fuel components in the exhaust. In addition to a conventional exhaust emissions bench, this characterization requires supplementary instrumentation capable of hydrocarbon speciation and response factor independent quantification. Although required for certification testing, this sort of instrumentation is not yet widely available in engine development facilities. Therefore, an attempt is made to empirically determine FID correction factors for oxygenate fuels. Exhaust emissions of an engine fueled with several blends of gasoline and ethanol, n-butanol and iso-Butanol were characterized using both a conventional FID and a Fourier transform infrared. Based on these results, a response factor predicting the actual hydrocarbon emissions based solely on FID results as a function of alcohol type and content is presented. Finally, the correlation derived from data presented in this study is compared with equations and results found in the literature.
- 11 April 2011
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 133 (8) , 082801
Correlation Between Speciated Hydrocarbon Emissions and Flame Ionization Detector Response for Gasoline/Alcohol Blends
The U.S. renewable fuel standard has made it a requirement to increase the production of ethanol and advanced biofuels to 36 billion by 2022. Ethanol will be capped at 15 billion, which leaves 21 billion to come from other sources such as butanol. Butanol has a higher energy density and lower affinity for water than ethanol. Moreover, alcohol fueled engines in general have been shown to positively affect engine-out emissions of oxides of nitrogen and carbon monoxide compared with their gasoline fueled counterparts. In light of these developments, the variety and blend levels of oxygenated constituents is likely to increase in the foreseeable future. The effect on engine-out emissions for total hydrocarbons is less clear due to the relative insensitivity of the flame ionization detector (FID) toward alcohols and aldehydes. It is well documented that hydrocarbon (HC) measurement using a conventional FID in the presence of oxygenates in the engine exhaust stream can lead to a misinterpretation of HC emissions trends for alcohol fuel blends. Characterization of the exhaust stream for all expected hydrocarbon constituents is required to accurately determine the actual concentration of unburned fuel components in the exhaust. In addition to a conventional exhaust emissions bench, this characterization requires supplementary instrumentation capable of hydrocarbon speciation and response factor independent quantification. Although required for certification testing, this sort of instrumentation is not yet widely available in engine development facilities. Therefore, an attempt is made to empirically determine FID correction factors for oxygenate fuels. Exhaust emissions of an engine fueled with several blends of gasoline and ethanol, n-butanol and iso-Butanol were characterized using both a conventional FID and a Fourier transform infrared. Based on these results, a response factor predicting the actual hydrocarbon emissions based solely on FID results as a function of alcohol type and content is presented. Finally, the correlation derived from data presented in this study is compared with equations and results found in the literature.