Jean-Yves Morel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jean-Yves Morel has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Cristina Morel
ESTACA’Lab-Laval, École Supérieure des Techniques Aéronautiques et de Construction Automobile (ESTACA), F-53000 Laval, France
5 shared publications - Cristina Morel
ESEO, 10 Bd. Jeanneteau, 49107 Angers, France
2 shared publications - Dorin Petreus
Applied Electronics Department, Faculty of Electronics, Telecommunications and Information Technology, Technical University of Cluj-Napoca, 400114 Cluj-Napoca, Romania
1 shared publication Radu Vlad
Management and Systems Engineering Department, Technical University of Cluj-Napoca, 103-105 Bd. Muncii, 400641 Cluj-Napoca, Romania
1 shared publication- Radu Vlad
Technical University of Cluj-Napoca, Cluj-Napoca, Romania
1 shared publication
Latest Publications
- Open Access
Analytical Determination of Empirical Coefficients for Several Lifetime Models of Power Semiconductors
Power cycling reliability is one of the most widely used frameworks to evaluate the lifetimes of power semiconductor switching devices from a thermal stress perspective. Experimental tests can be used to predict their lifetimes under operating conditions. An estimation of the number of cycles to failure can also be given by several lifetime models, which express the number of cycles to end of life as a function of empirical coefficients. In the existing literature, these empirical coefficients are generally estimated using the classical least squares method (to find the best-fitting line through data points), where outliers are removed using the Random Sample Consensus algorithm. The aim of this paper is to present a general strategy for the calculation of empirical coefficients for different lifetime models, such as Coffin–Manson, Coffin–Manson–Arrhenius, Norris–Landzberg, and simplified Bayerer, aiming at minimizing the number of required experimental tests. The results show that the number of experimental trials required varies between two and four, depending on the number of empirical coefficients to be determined, which is specific to the lifetime model used. Furthermore, a limited number of experimental data points are selected to avoid any degradation in accuracy. The accuracy of coefficient estimation is significantly improved by excluding outliers: some relative errors decrease by 25%. Additionally, each empirical coefficient is determined under specific thermal stress conditions, such as a constant junction temperature swing , constant current per bond wire I, constant cycling frequency f, or constant mean junction temperature . Furthermore, a limited number of experimental data are selected to avoid any degradation in accuracy due to outliers. Moreover, this general method can be applied to all power devices, such as IGBTs or MOSFETs. Finally, the limitations of the analytical solution for the Scheuermann lifetime model are discussed.Open AccessAnalytical Determination of Empirical Coefficients for Several Lifetime Models of Power Semiconductors
Power cycling reliability is one of the most widely used frameworks to evaluate the lifetimes of power semiconductor switching devices from a thermal stress perspective. Experimental tests can be used to predict their lifetimes under operating conditions. An estimation of the number of cycles to failure can also be given by several lifetime models, which express the number of cycles to end of life as a function of empirical coefficients. In the existing literature, these empirical coefficients are generally estimated using the classical least squares method (to find the best-fitting line through data points), where outliers are removed using the Random Sample Consensus algorithm. The aim of this paper is to present a general strategy for the calculation of empirical coefficients for different lifetime models, such as Coffin–Manson, Coffin–Manson–Arrhenius, Norris–Landzberg, and simplified Bayerer, aiming at minimizing the number of required experimental tests. The results show that the number of experimental trials required varies between two and four, depending on the number of empirical coefficients to be determined, which is specific to the lifetime model used. Furthermore, a limited number of experimental data points are selected to avoid any degradation in accuracy. The accuracy of coefficient estimation is significantly improved by excluding outliers: some relative errors decrease by 25%. Additionally, each empirical coefficient is determined under specific thermal stress conditions, such as a constant junction temperature swing , constant current per bond wire I, constant cycling frequency f, or constant mean junction temperature . Furthermore, a limited number of experimental data are selected to avoid any degradation in accuracy due to outliers. Moreover, this general method can be applied to all power devices, such as IGBTs or MOSFETs. Finally, the limitations of the analytical solution for the Scheuermann lifetime model are discussed. - Open Access
Chaos Anticontrol and Switching Frequency Impact on MOSFET Junction Temperature and Lifetime
Generating chaos from originally non-chaotic systems is a promising issue. Indeed, chaos has been successfully applied in many fields to improve system performance. In this work, a Buck converter is chaotified using a combination of the switching piecewise-constant characteristic and of anticontrol of chaos feedback. For electromagnetic compatibility compliance reasons, this feedback control method is able, at the same time, to achieve low spectral emissions and to maintain a small ripple of the output voltage and the inductance current. This new feedback implies a fast and non-linear switching action of the Buck MOSFET on a period of the ramp generator. Thus, it is essential to analyze its thermal performance. This is why we propose an original analysis of the influence of anticontrol of chaos and switching frequency variation on junction temperature: we investigate the correlation between the lifetime of the power electronic switching component and its thermal stress due to the addition of chaos. It appeared that a reduction in the current ripple did not degrade the MOSFET junction thermal performance, despite the fast switching of the MOSFET. Furthermore, a small degradation in the MOSFET lifetime was indicated for chaotic behavior versus periodic behavior. Thus, this leads to the conclusion that using anticontrol of chaos produces a low accumulated fatigue effect on a Buck converter semiconductor.
Open AccessChaos Anticontrol and Switching Frequency Impact on MOSFET Junction Temperature and Lifetime
Generating chaos from originally non-chaotic systems is a promising issue. Indeed, chaos has been successfully applied in many fields to improve system performance. In this work, a Buck converter is chaotified using a combination of the switching piecewise-constant characteristic and of anticontrol of chaos feedback. For electromagnetic compatibility compliance reasons, this feedback control method is able, at the same time, to achieve low spectral emissions and to maintain a small ripple of the output voltage and the inductance current. This new feedback implies a fast and non-linear switching action of the Buck MOSFET on a period of the ramp generator. Thus, it is essential to analyze its thermal performance. This is why we propose an original analysis of the influence of anticontrol of chaos and switching frequency variation on junction temperature: we investigate the correlation between the lifetime of the power electronic switching component and its thermal stress due to the addition of chaos. It appeared that a reduction in the current ripple did not degrade the MOSFET junction thermal performance, despite the fast switching of the MOSFET. Furthermore, a small degradation in the MOSFET lifetime was indicated for chaotic behavior versus periodic behavior. Thus, this leads to the conclusion that using anticontrol of chaos produces a low accumulated fatigue effect on a Buck converter semiconductor.
- Open Access
- 23 January 2025
- Published by MDPI AG in Preprints.org
Impact of Chaos Anticontrol and Switching Frequency Variation on MOSFET Junction Temperature and Lifetime
Generating chaos from originally non-chaotic systems is a promising issue. Indeed, chaos has been successfully applied in many fields to improve systems performance. In this work, a Buck converter is chaotified using a combination of the switching piecewise-constant characteristic and of the anticontrol of chaos feedback. For electromagnetic compatibility compliance reasons, this feedback control method is able at the same time to achieve low spectral emissions and to maintain a small ripple of the output voltage and of the inductance current. This new feedback implies a fast and non-linear switching action of the Buck Mosfet on a period of the ramp generator. Thus, it is essential to analyze its thermal performance. This is why we propose an original analysis of the influence of anticontrol of chaos and switching frequency variation on the junction temperature: we investigate the correlation between the lifetime of the power electronic switching component and its thermal stress due to the addition of chaos. It appears that the reduction of the current ripple does not degrade the Mosfet junction thermal performances despite the fast switching of the Mosfet. Furthermore, an insignificant degradation of the Mosfet lifetime is indicated for chaotic behavior versus periodic behavior. Thus, this leads to the conclusion that using anticontrol of chaos produces insignificant accumulated fatigue effect of the Buck converter’s semiconductor.
- 23 January 2025
- Published by MDPI AG in Preprints.org
Open AccessImpact of Chaos Anticontrol and Switching Frequency Variation on MOSFET Junction Temperature and Lifetime
Generating chaos from originally non-chaotic systems is a promising issue. Indeed, chaos has been successfully applied in many fields to improve systems performance. In this work, a Buck converter is chaotified using a combination of the switching piecewise-constant characteristic and of the anticontrol of chaos feedback. For electromagnetic compatibility compliance reasons, this feedback control method is able at the same time to achieve low spectral emissions and to maintain a small ripple of the output voltage and of the inductance current. This new feedback implies a fast and non-linear switching action of the Buck Mosfet on a period of the ramp generator. Thus, it is essential to analyze its thermal performance. This is why we propose an original analysis of the influence of anticontrol of chaos and switching frequency variation on the junction temperature: we investigate the correlation between the lifetime of the power electronic switching component and its thermal stress due to the addition of chaos. It appears that the reduction of the current ripple does not degrade the Mosfet junction thermal performances despite the fast switching of the Mosfet. Furthermore, an insignificant degradation of the Mosfet lifetime is indicated for chaotic behavior versus periodic behavior. Thus, this leads to the conclusion that using anticontrol of chaos produces insignificant accumulated fatigue effect of the Buck converter’s semiconductor.
- Open Access
Power Semiconductor Junction Temperature and Lifetime Estimations: A Review
The lifetime of power electronic systems is the focus of both the academic and industrial worlds. Today, compact systems present high switching frequency and power dissipation density, causing high junction temperatures and strong thermal fluctuations that affect their performance and lifetime. This paper is a review of the existing techniques for the electro-thermal modelling of Mosfet and IGBT devices regarding lifetime estimation. The advantages and disadvantages of the methodologies used to achieve lifetime prediction are discussed, and their benefits are highlighted. All the factors required to predict power electronic device lifetime, including Mosfet and IGBT electrical models, the computation of power losses, thermal models, temperature measurement and management, lifetime models, mission profiles, cycle counting, and damage accumulation, are described and compared.
Open AccessPower Semiconductor Junction Temperature and Lifetime Estimations: A Review
The lifetime of power electronic systems is the focus of both the academic and industrial worlds. Today, compact systems present high switching frequency and power dissipation density, causing high junction temperatures and strong thermal fluctuations that affect their performance and lifetime. This paper is a review of the existing techniques for the electro-thermal modelling of Mosfet and IGBT devices regarding lifetime estimation. The advantages and disadvantages of the methodologies used to achieve lifetime prediction are discussed, and their benefits are highlighted. All the factors required to predict power electronic device lifetime, including Mosfet and IGBT electrical models, the computation of power losses, thermal models, temperature measurement and management, lifetime models, mission profiles, cycle counting, and damage accumulation, are described and compared.
- Open Access
- 25 April 2024
- Published by MDPI AG in Electronics
- Vol. 13 (9) , 1649
Impact of Chaos on MOSFET Thermal Stress and Lifetime
The reliability of power electronic switching components is of great concern for many researchers. For their usage in many mission profiles, it is crucial for them to perform for the duration of their intended lifetime; however, they can fail because of thermal stress. Thus, it is essential to analyze their thermal performance. Non-linear switching action, bifurcation and chaotic events may occur in DC-DC power converters. Consequently, they show different behaviors when their parameters change. However, this is an opportunity to study these bifurcation phenomena and the existence of chaos, e.g., in boost converters, on their performance as the effects of load variations (mission profiles) on the system’s behavior. These variations generate many non-linear phenomena such as periodic behavior, repeated period-doubling bifurcations and chaos in the MOSFET drain-source current. Thus, we propose, for the first time, an analysis of the influence of chaos on the junction temperature. First of all, this paper provides a step-by-step procedure to establish an electrothermal model of a C2M0080120D MOSFET with integrated power loss. Then, the junction temperature is estimated by computing the power losses and a thermal impedance model of the switch. Additionally, this model is used to investigate the bifurcation and chaotic behavior of the MOSFET junction temperature. The paper contributes by providing a mathematical model to calculate several coefficients based on experimental data and thermal oscillations. Estimation of the number of cycles to failure is given by the Coffin–Manson equation, while temperature cycles are counted using the rainflow counting algorithm. Further, the accumulated damage results are calculated using the Miner’s model. Finally, a comparison is made between the damage accumulated during different mission profiles: significant degradation of the MOSFET’s lifetime is pointed out for chaotic currents compared to periodic ones.
- 25 April 2024
- Published by MDPI AG in Electronics
- Vol. 13 (9) , 1649
Open AccessImpact of Chaos on MOSFET Thermal Stress and Lifetime
The reliability of power electronic switching components is of great concern for many researchers. For their usage in many mission profiles, it is crucial for them to perform for the duration of their intended lifetime; however, they can fail because of thermal stress. Thus, it is essential to analyze their thermal performance. Non-linear switching action, bifurcation and chaotic events may occur in DC-DC power converters. Consequently, they show different behaviors when their parameters change. However, this is an opportunity to study these bifurcation phenomena and the existence of chaos, e.g., in boost converters, on their performance as the effects of load variations (mission profiles) on the system’s behavior. These variations generate many non-linear phenomena such as periodic behavior, repeated period-doubling bifurcations and chaos in the MOSFET drain-source current. Thus, we propose, for the first time, an analysis of the influence of chaos on the junction temperature. First of all, this paper provides a step-by-step procedure to establish an electrothermal model of a C2M0080120D MOSFET with integrated power loss. Then, the junction temperature is estimated by computing the power losses and a thermal impedance model of the switch. Additionally, this model is used to investigate the bifurcation and chaotic behavior of the MOSFET junction temperature. The paper contributes by providing a mathematical model to calculate several coefficients based on experimental data and thermal oscillations. Estimation of the number of cycles to failure is given by the Coffin–Manson equation, while temperature cycles are counted using the rainflow counting algorithm. Further, the accumulated damage results are calculated using the Miner’s model. Finally, a comparison is made between the damage accumulated during different mission profiles: significant degradation of the MOSFET’s lifetime is pointed out for chaotic currents compared to periodic ones.
- 24 September 2013
- Published by Taylor & Francis in International Journal of Computer Mathematics
- Vol. 91 (6) , 1255-1280
Synchronization of chaotic attractors with different equilibrium points
This paper investigates the synchronization of coupled chaotic systems with many equilibrium points. By addition of an external switching piecewise-constant controller, the system changes to a new one with several independent chaotic attractors in the state space. Then, by addition of a nonlinear state feedback control, the chaos synchronization is presented. This method can be used in many couples of chaotic systems characterized by the same equilibrium point or by two different equilibrium points, even they are the same systems (Lorenz, Jerk, Van der Pol) or two chaotic systems with different structures (Lorenz modified).
- 24 September 2013
- Published by Taylor & Francis in International Journal of Computer Mathematics
- Vol. 91 (6) , 1255-1280
Synchronization of chaotic attractors with different equilibrium points
This paper investigates the synchronization of coupled chaotic systems with many equilibrium points. By addition of an external switching piecewise-constant controller, the system changes to a new one with several independent chaotic attractors in the state space. Then, by addition of a nonlinear state feedback control, the chaos synchronization is presented. This method can be used in many couples of chaotic systems characterized by the same equilibrium point or by two different equilibrium points, even they are the same systems (Lorenz, Jerk, Van der Pol) or two chaotic systems with different structures (Lorenz modified).
- 2 September 2008
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 3 (4) , 041009
Anticontrol of Chaos Reduces Spectral Emissions
Switch-mode power supplies usually emit electromagnetic interferences at the switching frequency and its harmonics. Inducing chaos in these systems has recently been suggested as a means of reducing these spectral emissions, yet at the expense of aggravating the overall magnitude of the ripple in the output voltage. We propose here a new nonlinear feedback, which induces chaos and which is able at the same time to achieve a low spectral emission and to maintain a small ripple in the output. The design of this new and simple controller is based on the propriety that chaotified nonlinear systems present many independent chaotic attractors of small dimensions.
- 2 September 2008
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 3 (4) , 041009
Anticontrol of Chaos Reduces Spectral Emissions
Switch-mode power supplies usually emit electromagnetic interferences at the switching frequency and its harmonics. Inducing chaos in these systems has recently been suggested as a means of reducing these spectral emissions, yet at the expense of aggravating the overall magnitude of the ripple in the output voltage. We propose here a new nonlinear feedback, which induces chaos and which is able at the same time to achieve a low spectral emission and to maintain a small ripple in the output. The design of this new and simple controller is based on the propriety that chaotified nonlinear systems present many independent chaotic attractors of small dimensions.