VMV. K. Milinchuk

V. K. Milinchuk

*This is an algorithmically generated author record based on publicly available information.

V. K. Milinchuk has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Generation of hydrogen by hydroreactive compositions with γ-irradiated aluminum

    by V. K. Milinchuk, E. R. Klinshpont, V. I. Belozerov

    The kinetics of hydrogen generation by heterogeneous hydroreactive compositions with aluminum, which was preliminarily γ-irradiated in air, held in aqueous solutions at room temperature, and annealed at a high temperature, was studied. Changes in the hydrogen generation kinetics depending on the γ-radiation dose, the composition of aqueous solution, and the temperature are caused by the conversion of aluminum oxide coatings, which should be taken into account in the prediction of the corrosion resistance of structural materials under the conditions of exposures at nuclear power plants.

  • Open Access

    Hydrozirconium reaction in heterogeneous compositions

    by V.K. Milinchuk, E.R. Klinshpont, V.I. Belozerov, A.V. Zagorodnyaya

    The research results presented in this article show the behavior of a hydrozirconium reaction for hydrogen generation at temperatures below 100°C in heterogeneous compositions containing zirconium and chemical activators (e.g., hydrated sodium metasilicate, sodium water glass, or quicklime). The hydrogen yield increases with a temperature increase up to 95°C and is about 0.1–0.2l per 1g of zirconium. Zirconium processing with γ-radiation as well as exposure to acidic and neutral aqueous media increases the hydrogen yield by about 1.2 times. A hydrozirconium reaction is caused by the chemical activators removing the passivating protective zirconium oxide ZrO2 layer from the metal surface. The possibility of a hydrozirconium reaction occurrence should be considered in the organization of technical measures to ensure hydrogen explosion protection at NPPs


  • Open Access

    Standalone hydrogen generator based on chemical decomposition of water by aluminum

    by V.K. Milinchuk, E.R. Klinshpont, V.I. Belozerov

    A standalone hydrogen generator (SHG) has been developed based on chemical decomposition of water in heterogeneous compositions containing finely dispersed aluminum powder and crystallohydrates of sodium metasilicate. The kinetics of hydrogen generation has been studied depending on constants of the aluminum activation and oxidation rate, and aluminum and oxygen concentrations. In the hydrogen accumulation kinetics, the length of the induction period is determined by the concentration of oxygen. The SHG design, hydrogen selection and capacity are discussed. The availability and low cost of domestically manufactured chemical agents make the SHG a promising choice as the source of hydrogen for various applications, including nuclear power plants (NPP).


  • Open Access

    Investigation into the Impregnation of Roasted Anodes of Aluminum Electrolyzers

    by S. M. Merkov, A. V. Alekseev, E. R. Kinshpont, V. K. Milinchuk, Yu. A. Lainer, Е. Н. Самойлов

    Приведены результаты исследований процесса импрегнирования (пропитывания) органическими соединениями образ- цов готовых обожженных анодов, перспективных для алюминиевых электролизеров. Разработана методика проведения данного процесса, включающая предварительное вакуумирование, последующее насыщение образцов органическими соединениями под избыточным внешним давлением и, далее, высокотемпературный пиролиз в расплаве свинец–висмут. Установлено, что разработанный метод модифицирования позволяет увеличить коррозионную стойкость обожженных анодов.


  • Characterization of polyimide films exposed at the mir orbital space station

    by V. K. Milinchuk, E. R. Klinshpont, O. A. Anan’EVa, O. F. Pasevich

    Polyimide films remained unchanged upon an exposure at the Mir orbital space station under quartz plates, which protected them from bombardment by atomic oxygen with an energy of ∼5 eV and transmitted solar radiation with λ ≥ 200 nm. The films underwent considerable degradation under the simultaneous action of atomic oxygen and solar radiation. The large weight loss and the mechanical destruction of one-sidedly aluminized polyimide films were caused by the participation of an aluminum coating in the polyimide destruction process. The accelerated degradation of the aluminum-polyimide composition can be explained by the photoeffect mechanism, the scavenging of photoelectrons emitted from aluminum by imide and benzene groups, and the formation and photochemical conversion of light-sensitive centers.


  • Characterization of polymer materials exposed at the Mir orbital space station

    by V. K. Milinchuk, E. R. Klinshpont, O. F. Pasevich, O. A. Anan’EVa

    The results of studies of polyimide and fluoropolymer films after a prolonged exposure at the Mir orbital space station are reported. The weight loss of external polyimide films was ∼40–60%; the weight of FEP-100A fluoropolymer films remained unchanged, and the weight of F-4MB films increased by ∼50%. The external and internal surfaces of polyimide films were hydrophilized. The external surface of a polyimide film acquired anisotropic properties, which manifested themselves as the shape anisotropy of liquid drops, the surface tension and the work of adhesion, the light scattering circular diagrams, and in the formation of spatially oriented fractal structures. The appearance of anisotropic properties is a consequence of the arrangement of a film on the station surface at an angle to the flow of atomic oxygen. The possible reactions of fast and scattered oxygen atoms, which are responsible for the chemical and structural transformations of polyimide, are discussed.


  • Physicochemical processes in polymer materials upon exposure at the MIR orbital space station

    by V. K. Milinchuk

    An overview of papers on the investigation of physicochemical processes occurring in polymer (polyimide, fluoropolymer, fluoropolyimide, unilaterally aluminized polyimide) films during long-term exposure at the Mir orbital space station is presented in the article dedicated to the centenary of the birthday of Professor S. Ya. Pshezhetskii. Anisotropic nano- and micro-structures oriented in the direction of motion of the station have been detected for the first time with the scanning electron microscopy and atomic force microscopy techniques on surfaces of films exposed to the effects of all factors of open space. The formation of anisotropic structures has been confirmed by the investigation of the light scattering circular diagrams and surface properties of the films. It is supposed that the formation of such structures results from collisions of a flux of oxygen atoms having an energy of ∼5 eV, with the outer surface of the films. It has been found with the use of electronic absorption and infrared spectroscopy that the changes in the surface and optical properties of the films are caused by the occurrence of oxidation processes, degradation of macromolecules, and opening of the imide cycles and aromatic rings of polyimide. Unilaterally aluminized polyimide films are the least resistant to the effects of outer space factors, what can be explained by the photoelectron mechanism of polymer destruction.

  • The estimation of the stability of ionite complexes formed in the sorption of copper cations by weakly alkaline AM-7 anionite

    by P. N. Chelnakova, V. A. Kolodyazhnyi, E. S. Volkova

    The sorption of copper cations by the complex-forming AM-7 anionite was studied. It was shown that the sorption of copper ions from aqueous solutions was satisfactorily described by the Langmuir equation. The linear approximation to this equation can be used to determine the maximum sorption capacity of the complex-forming anionite. Two independent methods for the determination of the characteristics of the ionite complex (the sorption capacity, stability constant, and coordination number) were considered: the determination of the stability constant from the distribution coefficient and from the data on the destruction of ammonia copper complexes brought in contact with the deprotonated ionite form. In both cases, the calculated stability constants of ionite complexes and the coordination numbers are in satisfactory agreement.


  • Study of one-side aluminized polyimide films exposed on the Mir orbital space station

    by O. A. Anan’EVa, V. K. Milinchuk, D. L. Zagorskii

    During exposure on the Mir space station, external polyimide films aluminized on one side substantially lost mass and mechanical strength and their outer surfaces became hydrophilic. The surface tension and polar plots of brightness of the exposed films acquired an anisotropic character. Spatially-oriented nano- and microsized entities, whose size and shape depend on the time of exposure, were detected by the scanning electron and atomic-force microscopy techniques on the outer surfaces of external films. The orientation axes of drops on the surface of the films, polar plots of brightness, and spatially oriented structures coincided with the direction of the station movement. It was assumed that one of the main factors of outer space responsible for mass loss and the formation of the anisotropic nano- and microsized structures is the impact of a flux of oxygen atoms onto the surface of the external film. The efficiency of the reaction of atomic oxygen with polyimides was estimated. A possible (photoelectron) mechanism of the influence of the metal on polyimide degradation is discussed.


  • Study of the properties and structure of polyimide and bilayer fluoropolyimide films after space exposure on the Mir space station

    by O. A. Anan’EVa, V. K. Milinchuk, D. L. Zagorskii

    Results of examination of bilayer polyimide and fluorinated polyimide films after their exposure to outer space on the Mir space station are reported. The polyimide films were screened by quartz plates during exposure. An increase in the surface energy and the work of adhesion indicate substantial hydrophilization of the open surface, as well as slight hydrophilization of the screened film surface. A difference in values of the surface energy and work of adhesion depending on the orientation of a sample relative to the direction of motion of the space station indicates that the surface properties of the outer surface of the unscreened film became anisotropic in character, with the anisotropy axis being aligned with the direction of motion of the spacecraft. The fact that the outer surface of the film has acquired anisotropic properties is corroborated by the results of study of scanning electron microscopic images and polar plots of brightness. The hydrophilization of the films indicates an increase in the concentration of polar groups. In the space environment, the degradation of the fluoropolymer surface layer and its removal under high-vacuum conditions take place. For the quartz-shielded polyimide films, the surface energy and the work of adhesion remained practically the same as for the unexposed films. It was concluded that solar radiation (μ > 200 nm) does not cause a significant decline in the properties of the polyimide film.