Bjørn Skallerud
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bjørn Skallerud has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Victorien Prot
Biomechanics, Department of Structural Engineering, The Norwegian University of Science and Technology (NTNU), NO-7491, Trondheim, Norway
4 shared publications - Bjorn Torger Stokke
Norwegian University of Science and Technology (NTNU)
3 shared publications Hongliang Liu
Biomechanics Division, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), 7491, Trondheim, Norway
3 shared publicationsV. Prot
Simula Research Laboratory
3 shared publicationsVictorien Emile Prot
Biomechanics Division, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), 7491, Trondheim, Norway
3 shared publications- Zhiliang Zhang
Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway
3 shared publications
Latest Publications
- Open Access
- 19 February 2026
- Published by Elsevier in Acta Biomaterialia
- Vol. 213, 356-385
Regional mechanical and microstructural variations in ascending thoracic aortic aneurysms influenced by tricuspid and bicuspid aortic valves
- 19 February 2026
- Published by Elsevier in Acta Biomaterialia
- Vol. 213, 356-385
Open AccessRegional mechanical and microstructural variations in ascending thoracic aortic aneurysms influenced by tricuspid and bicuspid aortic valves
- 7 March 2024
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 146 (5) , 1-23
An Experiential Learning Opportunity in Norway: Computation for Bioengineering and Mechanical Engineering Students
The global learning initiative at Northeastern University is focused on fostering intercultural communication skills. The Dialogue of Civilization (DOC) program serves as a mechanism to achieve such a goal by offering faculty-led international experiences. In this paper, we have presented a detailed account of a DOC program that took place in Norway. The primary objective of the program was to teach mechanical engineering and bio-engineering students computational skills while stimulating critical thinking about the cultural and social aspects of technology and engineering in Norway. The program focused on two courses: a technical course and a special topics course. The technical course introduced students to finite element analysis, with practical applications and site visits in Norway to enhance experiential learning. In the special topics course, the interplay between modern technologies, like green energy, state policies, and the rights and traditions of the indigenous Sámi people was explored. The course highlighted both the progressive social policies in Norway and the historical discrimination against the Sámi. Student feedback was positive and experiential learning components such as guest lectures and site visits were particularly appreciated. Additional surveys showed that students' self-confidence was higher following the DOC program. In addition, female-identifying students had higher confidence in their future success after completion of this program as compared to their male-identifying counterparts. Our paper is expected to serve as a resource for educators seeking to integrate technical education with intercultural experiences and discussions on social and cultural impacts in engineering.
- 7 March 2024
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 146 (5) , 1-23
An Experiential Learning Opportunity in Norway: Computation for Bioengineering and Mechanical Engineering Students
The global learning initiative at Northeastern University is focused on fostering intercultural communication skills. The Dialogue of Civilization (DOC) program serves as a mechanism to achieve such a goal by offering faculty-led international experiences. In this paper, we have presented a detailed account of a DOC program that took place in Norway. The primary objective of the program was to teach mechanical engineering and bio-engineering students computational skills while stimulating critical thinking about the cultural and social aspects of technology and engineering in Norway. The program focused on two courses: a technical course and a special topics course. The technical course introduced students to finite element analysis, with practical applications and site visits in Norway to enhance experiential learning. In the special topics course, the interplay between modern technologies, like green energy, state policies, and the rights and traditions of the indigenous Sámi people was explored. The course highlighted both the progressive social policies in Norway and the historical discrimination against the Sámi. Student feedback was positive and experiential learning components such as guest lectures and site visits were particularly appreciated. Additional surveys showed that students' self-confidence was higher following the DOC program. In addition, female-identifying students had higher confidence in their future success after completion of this program as compared to their male-identifying counterparts. Our paper is expected to serve as a resource for educators seeking to integrate technical education with intercultural experiences and discussions on social and cultural impacts in engineering.
- Open Access
- 23 January 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-17
Fourier transform-based method for quantifying the three-dimensional orientation distribution of fibrous units
Several materials and tissues are characterized by a microstructure composed of fibrous units embedded in a ground matrix. In this paper, a novel three-dimensional (3D) Fourier transform-based method for quantifying the distribution of fiber orientations is presented. The method allows for an accurate identification of individual fiber families, their in-plane and out-of-plane dispersion, and showed fast computation times. We validated the method using artificially generated 3D images, in terms of fiber dispersion by considering the error between the standard deviation of the reconstructed and the prescribed distributions of the artificial fibers. In addition, we considered the measured mean orientation angles of the fibers and validated the robustness using a measure of fiber density. Finally, the method is employed to reconstruct a full 3D view of the distribution of collagen fiber orientations based on in vitro second harmonic generation microscopy of collagen fibers in human and mouse skin. The dispersion parameters of the reconstructed fiber network can be used to inform mechanical models of soft fiber-reinforced materials and biological tissues that account for non-symmetrical fiber dispersion.
- 23 January 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-17
Open AccessFourier transform-based method for quantifying the three-dimensional orientation distribution of fibrous units
Several materials and tissues are characterized by a microstructure composed of fibrous units embedded in a ground matrix. In this paper, a novel three-dimensional (3D) Fourier transform-based method for quantifying the distribution of fiber orientations is presented. The method allows for an accurate identification of individual fiber families, their in-plane and out-of-plane dispersion, and showed fast computation times. We validated the method using artificially generated 3D images, in terms of fiber dispersion by considering the error between the standard deviation of the reconstructed and the prescribed distributions of the artificial fibers. In addition, we considered the measured mean orientation angles of the fibers and validated the robustness using a measure of fiber density. Finally, the method is employed to reconstruct a full 3D view of the distribution of collagen fiber orientations based on in vitro second harmonic generation microscopy of collagen fibers in human and mouse skin. The dispersion parameters of the reconstructed fiber network can be used to inform mechanical models of soft fiber-reinforced materials and biological tissues that account for non-symmetrical fiber dispersion.
- Open Access
- 17 November 2023
- Published by Springer Nature in Biomechanics and Modeling in Mechanobiology
- Vol. 23 (2) , 507-524
Potential of computational models in personalized treatment of obstructive sleep apnea: a patient-specific partial 3D finite element study
The upper airway experiences mechanical loads during breathing. Obstructive sleep apnea is a very common sleep disorder, in which the normal function of the airway is compromised, enabling its collapse. Its treatment remains unsatisfactory with variable efficacy in the case of many surgeries. Finite element models of the upper airway to simulate the effects of various anatomic and physiologic manipulations on its mechanics could be helpful in predicting surgical success. Partial 3D finite element models based on patient-specific CT-scans were undertaken in a pilot study of 5 OSA patients. Upper airway soft tissues including the soft palate, hard palate, tongue, and pharyngeal wall were segmented around the midsagittal plane up to a width of 2.5 cm in the lateral direction. Simulations of surgical interventions such as Uvulopalatopharyngoplasty (UPPP), maxillo-mandibular advancement (MMA), palatal implants, and tongue implants have been performed. Our results showed that maxillo-mandibular advancement (MMA) surgery of 1 cm improved the critical closing pressure by at least 212.2%. Following MMA, the best improvement was seen via uvulopalatopharyngoplasty (UPPP), with an improvement of at least 19.12%. Palatal and tongue implants also offered a certain degree of improvement. Further, we observed possible interacting mechanisms that suggested simultaneous implementation of UPPP and tongue stiffening; and palatal and tongue stiffening could be beneficial. Our results suggest that computational modeling is a useful tool for analyzing the influence of anatomic and physiological manipulations on upper airway mechanics. The goal of personalized treatment in the case of OSA could be achieved with the use of computational modeling.
- 17 November 2023
- Published by Springer Nature in Biomechanics and Modeling in Mechanobiology
- Vol. 23 (2) , 507-524
Open AccessPotential of computational models in personalized treatment of obstructive sleep apnea: a patient-specific partial 3D finite element study
The upper airway experiences mechanical loads during breathing. Obstructive sleep apnea is a very common sleep disorder, in which the normal function of the airway is compromised, enabling its collapse. Its treatment remains unsatisfactory with variable efficacy in the case of many surgeries. Finite element models of the upper airway to simulate the effects of various anatomic and physiologic manipulations on its mechanics could be helpful in predicting surgical success. Partial 3D finite element models based on patient-specific CT-scans were undertaken in a pilot study of 5 OSA patients. Upper airway soft tissues including the soft palate, hard palate, tongue, and pharyngeal wall were segmented around the midsagittal plane up to a width of 2.5 cm in the lateral direction. Simulations of surgical interventions such as Uvulopalatopharyngoplasty (UPPP), maxillo-mandibular advancement (MMA), palatal implants, and tongue implants have been performed. Our results showed that maxillo-mandibular advancement (MMA) surgery of 1 cm improved the critical closing pressure by at least 212.2%. Following MMA, the best improvement was seen via uvulopalatopharyngoplasty (UPPP), with an improvement of at least 19.12%. Palatal and tongue implants also offered a certain degree of improvement. Further, we observed possible interacting mechanisms that suggested simultaneous implementation of UPPP and tongue stiffening; and palatal and tongue stiffening could be beneficial. Our results suggest that computational modeling is a useful tool for analyzing the influence of anatomic and physiological manipulations on upper airway mechanics. The goal of personalized treatment in the case of OSA could be achieved with the use of computational modeling.
- Open Access
On the Determination of Mechanical Properties of Aqueous Microgels—Towards High-Throughput Characterization
Aqueous microgels are distinct entities of soft matter with mechanical signatures that can be different from their macroscopic counterparts due to confinement effects in the preparation, inherently made to consist of more than one domain (Janus particles) or further processing by coating and change in the extent of crosslinking of the core. Motivated by the importance of the mechanical properties of such microgels from a fundamental point, but also related to numerous applications, we provide a perspective on the experimental strategies currently available and emerging tools being explored. Albeit all techniques in principle exploit enforcing stress and observing strain, the realization differs from directly, as, e.g., by atomic force microscope, to less evident in a fluid field combined with imaging by a high-speed camera in high-throughput strategies. Moreover, the accompanying analysis strategies also reflect such differences, and the level of detail that would be preferred for a comprehensive understanding of the microgel mechanical properties are not always implemented. Overall, the perspective is that current technologies have the capacity to provide detailed, nanoscopic mechanical characterization of microgels over an extended size range, to the high-throughput approaches providing distributions over the mechanical signatures, a feature not readily accessible by atomic force microscopy and micropipette aspiration.
Open AccessOn the Determination of Mechanical Properties of Aqueous Microgels—Towards High-Throughput Characterization
Aqueous microgels are distinct entities of soft matter with mechanical signatures that can be different from their macroscopic counterparts due to confinement effects in the preparation, inherently made to consist of more than one domain (Janus particles) or further processing by coating and change in the extent of crosslinking of the core. Motivated by the importance of the mechanical properties of such microgels from a fundamental point, but also related to numerous applications, we provide a perspective on the experimental strategies currently available and emerging tools being explored. Albeit all techniques in principle exploit enforcing stress and observing strain, the realization differs from directly, as, e.g., by atomic force microscope, to less evident in a fluid field combined with imaging by a high-speed camera in high-throughput strategies. Moreover, the accompanying analysis strategies also reflect such differences, and the level of detail that would be preferred for a comprehensive understanding of the microgel mechanical properties are not always implemented. Overall, the perspective is that current technologies have the capacity to provide detailed, nanoscopic mechanical characterization of microgels over an extended size range, to the high-throughput approaches providing distributions over the mechanical signatures, a feature not readily accessible by atomic force microscopy and micropipette aspiration.
- 4 February 2021
- Published by Wiley in Journal of Applied Mechanics
- Vol. 88 (5) , 1-15
A Perturbation Analysis Approach for Studying the Effect of Swelling Kinetics on Instabilities in Hydrogel Plates
The onset of surface instability during diffusion-driven swelling of hydrogels depends on the kinetics of the swelling process. Here, we outline a perturbation analysis framework using a finite difference approach for calculating the stability limit of swelling hydrogel plates with graded material properties accounting for kinetic effects. The framework is implemented as a Python routine which is made freely available. Results obtained for bilayered hydrogel plates illustrate that the onset of instability occurs earlier in time and at a lower global swelling ratio when kinetics is accounted for compared to the homogeneous swelling case. This work presents an accessible calculation tool for stability analysis of swelling gels, providing input for the design of novel hydrogel systems.
- 4 February 2021
- Published by Wiley in Journal of Applied Mechanics
- Vol. 88 (5) , 1-15
A Perturbation Analysis Approach for Studying the Effect of Swelling Kinetics on Instabilities in Hydrogel Plates
The onset of surface instability during diffusion-driven swelling of hydrogels depends on the kinetics of the swelling process. Here, we outline a perturbation analysis framework using a finite difference approach for calculating the stability limit of swelling hydrogel plates with graded material properties accounting for kinetic effects. The framework is implemented as a Python routine which is made freely available. Results obtained for bilayered hydrogel plates illustrate that the onset of instability occurs earlier in time and at a lower global swelling ratio when kinetics is accounted for compared to the homogeneous swelling case. This work presents an accessible calculation tool for stability analysis of swelling gels, providing input for the design of novel hydrogel systems.
- Open Access
Donnan Contribution and Specific Ion Effects in Swelling of Cationic Hydrogels are Additive: Combined High-Resolution Experiments and Finite Element Modeling
Finite element modeling applied to analyze experimentally determined hydrogel swelling data provides quantitative description of the hydrogel in the aqueous solutions with well-defined ionic content and environmental parameters. In the present study, we expand this strategy to analysis of swelling of hydrogels over an extended concentration of salt where the Donnan contribution and specific ion effects are dominating at different regimes. Dynamics and equilibrium swelling were determined for acrylamide and cationic acrylamide-based hydrogels by high-resolution interferometry technique for step-wise increase in NaCl and NaBr concentration up to 2 M. Although increased hydrogel swelling volume with increasing salt concentration was the dominant trend for the uncharged hydrogel, the weakly charged cationic hydrogel was observed to shrink for increasing salt concentration up to 0.1 M, followed by swelling at higher salt concentrations. The initial shrinking is due to the ionic equilibration accounted for by a Donnan term. Comparison of the swelling responses at high NaCl and NaBr concentrations between the uncharged and the cationic hydrogel showed similar specific ion effects. This indicates that the ion non-specific Donnan contribution and specific ion effects are additive in the case where they are occurring in well separated ranges of salt concentration. We develop a novel finite element model including both these mechanisms to account for the observed swelling in aqueous salt solution. In particular, a salt-specific, concentration-dependent Flory–Huggins parameter was introduced for the specific ion effects. This is the first report on finite element modeling of hydrogels including specific ionic effects and underpins improvement of the mechanistic insight of hydrogel swelling that can be used to predict its response to environmental change.
Open AccessDonnan Contribution and Specific Ion Effects in Swelling of Cationic Hydrogels are Additive: Combined High-Resolution Experiments and Finite Element Modeling
Finite element modeling applied to analyze experimentally determined hydrogel swelling data provides quantitative description of the hydrogel in the aqueous solutions with well-defined ionic content and environmental parameters. In the present study, we expand this strategy to analysis of swelling of hydrogels over an extended concentration of salt where the Donnan contribution and specific ion effects are dominating at different regimes. Dynamics and equilibrium swelling were determined for acrylamide and cationic acrylamide-based hydrogels by high-resolution interferometry technique for step-wise increase in NaCl and NaBr concentration up to 2 M. Although increased hydrogel swelling volume with increasing salt concentration was the dominant trend for the uncharged hydrogel, the weakly charged cationic hydrogel was observed to shrink for increasing salt concentration up to 0.1 M, followed by swelling at higher salt concentrations. The initial shrinking is due to the ionic equilibration accounted for by a Donnan term. Comparison of the swelling responses at high NaCl and NaBr concentrations between the uncharged and the cationic hydrogel showed similar specific ion effects. This indicates that the ion non-specific Donnan contribution and specific ion effects are additive in the case where they are occurring in well separated ranges of salt concentration. We develop a novel finite element model including both these mechanisms to account for the observed swelling in aqueous salt solution. In particular, a salt-specific, concentration-dependent Flory–Huggins parameter was introduced for the specific ion effects. This is the first report on finite element modeling of hydrogels including specific ionic effects and underpins improvement of the mechanistic insight of hydrogel swelling that can be used to predict its response to environmental change.
- 3 December 2018
- Published by Springer Nature in Biomechanics and Modeling in Mechanobiology
- Vol. 18 (3) , 531-546
Soft palate muscle activation: a modeling approach for improved understanding of obstructive sleep apnea
A Hill model-based phenomenological method for muscle activation was used to investigate defectiveness of the palatal muscle tone during sleep for obstructive sleep apnea (OSA) patients. Based on the stretch–stress characteristic of muscle activation when the eccentric contraction is considered, a specifically defined phenomenological strain-energy function was used, as well as the Holzapfel-type strain-energy function for the passive part. A continuum mechanical framework, including the stress tensor and elasticity tensor, was obtained, based on the defined strain-energy function. The model parameters were obtained by fitting the constitutive model to experimental test data. Three-dimensional patient-specific geometry was modeled, accounting for the muscle tissue layer and based on the quantitative histology study of the soft palate. Anatomically representative boundary conditions for the finite element calculation were also considered. Palatal muscle activation level (electromyographic data) versus the negative pressure was defined in the simulations, and the patients’ activation level was set to be lower than for the healthy people. The simulation results showed that reduced in activation level for the patients causes a less negative closing pressure, and this makes the soft palate more prone to collapse. In addition, if we account for the passive–active transfer displayed as the muscle contraction corresponding to the neurogenic reflex in the soft palate, the collapse is prevented. This numerical representation of the reduced activation for the OSA patients may provide increased understanding of OSA physiology.
- 3 December 2018
- Published by Springer Nature in Biomechanics and Modeling in Mechanobiology
- Vol. 18 (3) , 531-546
Soft palate muscle activation: a modeling approach for improved understanding of obstructive sleep apnea
A Hill model-based phenomenological method for muscle activation was used to investigate defectiveness of the palatal muscle tone during sleep for obstructive sleep apnea (OSA) patients. Based on the stretch–stress characteristic of muscle activation when the eccentric contraction is considered, a specifically defined phenomenological strain-energy function was used, as well as the Holzapfel-type strain-energy function for the passive part. A continuum mechanical framework, including the stress tensor and elasticity tensor, was obtained, based on the defined strain-energy function. The model parameters were obtained by fitting the constitutive model to experimental test data. Three-dimensional patient-specific geometry was modeled, accounting for the muscle tissue layer and based on the quantitative histology study of the soft palate. Anatomically representative boundary conditions for the finite element calculation were also considered. Palatal muscle activation level (electromyographic data) versus the negative pressure was defined in the simulations, and the patients’ activation level was set to be lower than for the healthy people. The simulation results showed that reduced in activation level for the patients causes a less negative closing pressure, and this makes the soft palate more prone to collapse. In addition, if we account for the passive–active transfer displayed as the muscle contraction corresponding to the neurogenic reflex in the soft palate, the collapse is prevented. This numerical representation of the reduced activation for the OSA patients may provide increased understanding of OSA physiology.
- 1 August 2018
- Published by Elsevier in Journal of Biomechanics
- Vol. 77, 107-114
3D patient-specific numerical modeling of the soft palate considering adhesion from the tongue
- 1 August 2018
- Published by Elsevier in Journal of Biomechanics
- Vol. 77, 107-114
3D patient-specific numerical modeling of the soft palate considering adhesion from the tongue
- Open Access
- 1 January 2018
- Published by Elsevier in Journal of Biomechanics
- Vol. 66, 86-94
Palatal implant surgery effectiveness in treatment of obstructive sleep apnea: A numerical method with 3D patient-specific geometries
- 1 January 2018
- Published by Elsevier in Journal of Biomechanics
- Vol. 66, 86-94
Open AccessPalatal implant surgery effectiveness in treatment of obstructive sleep apnea: A numerical method with 3D patient-specific geometries