OAOlga V. Alekseeva

Olga V. Alekseeva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Olga V. Alekseeva has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ionic Liquid/Na-Bentonite/Microcrystalline Cellulose Ionogels as Conductive Multifunctional Materials

    by Olga Alekseeva, Valeriya Shibaeva, Andrew Noskov, Alexander Agafonov

    For the synthesis of ionogels containing microcrystalline cellulose (MCC) and Na-bentonite (Na-Bent), ionic liquid (IL) 1-butyl-3-methylimidazolium acetate was used as an MCC solvent. Characterization and research of the physicochemical properties of the synthesized materials were carried out using methods such as SEM, WAXS, thermal analysis, FTIR, conductometry, and viscometry. WAXS analysis showed an increase in the interlayer distance of Na-bentonite in composites due to the intercalation of IL molecules. Based on the data on the characteristic temperatures of thermal degradation, enhanced thermal stability of triple IL/Na-Bent/MCC ionogels was revealed compared to that for cellulose-free systems. It was found that the electrical conductivity of both triple IL/Na-Bent/MCC and binary IL/MCC ionogels was non-monotonous. The data obtained can be used in the formation of multifunctional coatings with enhanced thermal stability.


  • Synthesis, Physicochemical Properties, and Biological Activity of the Bentonite/Iron Oxide Composite

    by O. V. Alekseeva, D. N. Smirnova, A. V. Noskov, O. Yu. Kuznetsov, M. A. Kirilenko, A. V. Agafonov

    The powdered bentonite/iron oxide composite material was synthesized by chemical co-precipitation. The grain size composition, morphology, crystal structure, porosity, and thermal stability of the obtained powder were investigated. It was established that iron oxide exists in the composite as the maghemite/magnetite solid solution with the formula Fe2.950O4. An increase in the viability of the bacterium Escherichia coli M-17 after culturing in the nutrient medium in the presence of the synthesized bentonite/iron oxide powder was found.


  • STRUCTURE, THERMAL BEHAVIOR, AND ANTIBACTERIAL ACTIVITY OF POLYSTYRENE/HYDROXYAPATITE FILM COMPOSITES

    by Olga V. Alekseeva, Andrey V. Noskov

    Важнейшим направлением современного материаловедения является получение и исследование свойств полимерных композиционных материалов, содержащих микро- и наночастицы неорганических наполнителей. Введение таких частиц в полимерную матрицу увеличивает ее механическую прочность, термическую стабильность, изменяет электрические и газобарьерные свойства, способствует появлению биологической активности. Перечисленные свойства полученных композитов зависят от характеристик как исходного полимера, так и наполнителя. В настоящей работе с использованием ряда физико-химических методов охарактеризован порошок природного керамического минерала гидроксиапатита (ГАП), который является перспективным наполнителем полимерных материалов. Распределения частиц гидроксиапатита по размерам и количественные характеристики пористой структуры получены методами гранулометрического анализа и низкотемпературной сорбции-десорбции паров азота. Установлено, что исследуемый порошок может быть отнесен к мезопористым материалам с высокоразвитой поверхностью. Были определены: удельная поверхность ГАП, полный удельный объём пор, средний размер пор и фрактальная размерность пористого материала. Распределение пор по размерам является мономодальным с пиком при 4 нм. Методом механического диспергирования с использованием о-ксилола проведена иммобилизация частиц гидроксиапатита в матрице полистирола (ПС) и получены композиционные пленочные материалы ПС/ГАП. Представлены результаты исследования рассеяния рентгеновских лучей полистирольными и композиционными пленками с различным содержанием гидроксиапатита. Методом дифференциальной сканирующей калориметрии установлено, что композиты ПС/ГАП характеризуются двумя температурами стеклования, которые соответствуют релаксационным переходам в “мягкой” и “твердой фазе”. Проведены исследования биологической активности синтезированных композиционных материалов ПС/ГАП и впервые установлено их антибактериальное действие по отношению к грам-положительным бактериям Staphylococcus aureus Rosenbach 209-P. Для цитирования: Алексеева О.В., Носков А.В. Структура, термическое поведение и антибактериальная активность пленочных композитов полистирол/гидроксиапатит. Изв. вузов. Химия и хим. технология. 2022. Т. 65. Вып. 10. С. 106-112. DOI: 10.6060/ivkkt.20226510.6685.

  • Open Access

    Enhancing the Thermal Stability of Ionogels: Synthesis and Properties of Triple Ionic Liquid/Halloysite/MCC Ionogels

    by Olga V. Alekseeva, Valeriya D. Shibaeva, Andrew V. Noskov, Vladimir K. Ivanov, Alexander V. Agafonov

    In this study, an ionic liquid (IL), 1-butyl-3-methylimidazolium acetate, was used to prepare ionogels with microcrystalline cellulose (MCC) and halloysite (Hal). SEM, XRD, TG, DSC, FTIR spectroscopy, conductometry and mechanical tests were used to study the morphology, structure, thermal behaviour and electrophysical and mechanical characteristics of synthesised ionogels. XRD analysis showed a slight decrease in the interlayer space of halloysite in ionogels containing MCC, which may have been associated with the removal of residual water molecules resulting from hydrophilic IL anions and polymer macromolecules. A change in conductivity and glass-transition temperature of the ionic liquid was revealed due to intercalation into halloysite (a confinement effect) and modification with cellulose. For triple IL/Hal/MCC ionogels, the characteristic thermal degradation temperatures were higher than the corresponding values for IL/Hal composites. This indicates that the synthesised IL/Hal/MCC ionogels are characterised by a greater thermal stability than those of IL/Hal systems.


  • Sorption of meso-Phenylporphyrin Iodide on Polystyrene–Bentonite Film Composites

    by O. V. Alekseeva, A. N. Rodionova, S. A. Syrbu, N. A. Bagrovskaya, A. V. Noskov

    Modification of polystyrene (PS) with bentonite was carried out, and film materials with improved sorption properties toward macroheterocyclic compounds were obtained. It has been shown that the efficiency of adsorption of meso-phenylporphyrin iodide on the PS–bentonite composite is increased threefold compared to unmodified polymer. The kinetics of porphyrin adsorption was described by the reaction equations of the pseudo-first and pseudo-second order. It was revealed by IR spectroscopy that the adsorption of meso-phenylporphyrin iodide on the PS–bentonite composite occurs as a result of the donor–acceptor interaction of the porphyrin reaction centers with the oxygen-containing groups of the composite.

  • Sorption of Methylene Blue on Ethylcellulose–Bentonite Film Composites

    by O. V. Alekseeva, A. N. Rodionova, N. A. Bagrovskaya, A. V. Noskov, A. V. Agafonov

    The sorption activity of ethylcellulose–bentonite composites toward methylene blue has been studied. It has been determined that the degree of recovery of the dye with the composites increases by a factor of 2.5 as compared to unmodified polymer along with a significant decrease in the equilibrium time. Quantitative characteristics of sorption, such as modulus, filler content in composite, and initial concentration of dye in solution, have been determined under various conditions. It has been determined that the kinetics of the sorption process is described by the pseudo-first-order equation, while the isotherm fulfills the Langmuir law. Using IR spectroscopy, hydrogen-bond formation between oxygen-containing groups of the composite and heteroatoms of the dye has been shown.


  • Open Access

    Structural and Thermal Properties of Montmorillonite/Ionic Liquid Composites

    by Olga Alekseeva, Andrew Noskov, Elena Grishina, Lyudmila Ramenskaya, Nadezhda Kudryakova, Vladimir Ivanov, Alexander Agafonov

    Composites of montmorillonite K10 (MMT K10) and ionic liquid (IL) containing a 1-butyl-3-methyl-imidazolium cation ([BMIm]+) and various anions, such as bis (trifluoromethylsulfonyl) imide ([NTf2]−), trifluoromethanesulfonate ([OTf]−), and dicyanamide ([DCA]−) have been obtained in this work. A number of methods, such as dynamic light scattering (DLS), scanning electron microscopy (SEM), X-ray diffraction (XRD), thermal gravimetry (TG), differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, and nitrogen adsorption–desorption have been used to characterize clay, and to study the structure and thermal behaviour of the composites. It has been found that the MMT K10 powder has a narrow particle size distribution with a peak at 246 nm and a mesoporous structure (SBET=195 m2/g). According to the FTIR spectra, MMT K10/IL interaction depends on the IL type. It has been identified that confined ionic liquid interacts with both clay and adsorbed water in accordance with the hydrophilicity and size of the anion, in the following order: [DCA]− > [OTf]− > [NTf2]−. Characteristic temperatures of glass transition, crystallization, and melting have been determined for the ionic liquids under study and their MMT K10 composites. It has been revealed that when IL is adsorbed on the surface of clay, the phase transitions in IL change. The greatest changes are observed in the case of BMImNTf2. By applying the method of thermogravimetric analysis, it is shown that composite formation is accompanied by a decrease in the IL thermal stability. Apparently, the highly developed surface of montmorillonite K10, obtained by acid treatment, plays a major role in the decrease in the IL’s thermal stability. The influence of the IL anion on the thermal and spectral characteristics of an MMT K10/IL composite was studied for the first time.


  • LOW-TEMPERATURE SYNTHESIS OF BARIUM TITANITE IN AQUEOUS SOLUTION

    by Alexandr V. Agafonov, Konstantin V. Ivanov, Olga V. Alekseeva

    Низкотемпературным синтезом был получен порошок титаната бария со средним размером частиц порядка 300 нм в диаметре. Методом сканирующей электронной микроскопии установлено, что в процессе обжига с ростом температуры происходит последовательное уменьшение частиц с формированием полидисперсных агрегатов. На основании данных термогравиметрического анализа синтезированного порошка, выдержанного на воздухе в течение 4 мес., показано, что наряду с низкотемпературной фазой образец содержит высокотемпературную фазу карбонатов, удаление которой происходит при ~900 °C. Сорбционные характеристики термически обработанного при различных температурах титаната бария были получены по результатам адсорбции и десорбции паров азота. Удельная площадь поверхности порошка BaTiO3 составила 76 м2/г. Обнаружено, что дальнейшая термическая обработка приводит к уменьшению удельной площади поверхности. Методом рентгенофазового анализа гидроксотитанила бария, отожженного при температурах от 120 °C до 800 °C, показано, что термическая обработка образца приводит к образованию полностью сформированной фазы титаната бария. Методом ДСК определены температуры Кюри для порошка ГТБ, термически обработанного в диапазоне температур 120 - 800 °C. Получены диэлектрические спектры суспензий синтезированного порошка в процессе термической обработки. Выявлено влияние температуры обжига на диэлектрическую проницаемость суспензий. Установлено, что при предельно высоких частотах максимальное значение диэлектрической проницаемости наблюдается для суспензии с дисперсной фазой, отожженной при 800 °C, тогда как при предельно малых частотах наблюдается у суспензии с дисперсной фазой, отожженной при 600 °C.


  • Sorption of Methylene Blue on Polystyrene/Bentonite Film Composites

    by O. V. Alekseeva, A. N. Rodionova, N. A. Bagrovskaya, A. V. Noskov, A. V. Agafonov

    The method of mechanochemical dispersion of bentonite in a polystyrene solution was used to modify the polymer and obtain film materials with improved sorption characteristics with respect to the...


  • Thermal behaviour of poly(methyl methacrylate)/fullerene composite films

    by Olga V. Alekseeva, Andrew V. Noskov, Sabir S. Guseynov

    Poly(methyl methacrylate) films and poly(methyl methacrylate)/fullerene composite films were fabricated by casting from toluene solutions. The mass fraction of fullerene (C60) was varied from 0.05–3 wt. %. The effect of the fullerene (C60) content on the thermal degradation parameters of the composite films was evaluated by thermogravimetric (TG) analysis. It was found that the incorporation of C60 improved the thermal stability of the polymers. The films eventually decomposed in three stages. Incorporation of fullerene caused a change in the distribution of mass loss over the stages of degradation in comparison with the pristine polymer. Using differential scanning calorimetry (DSC), the phase transitions from the glassy state to the elastic one was studied for the examined polymeric materials. New data relating to the effect of C60 on the glass transition temperature of composites with low weight fractions of filler were obtained. Specifically, for films containing up to 0.1 wt. % of C60, a single glass transition temperature was found, whereas for composites with a higher concentration of filler, two glass transition temperatures were recorded.