Steffen Terhaar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Steffen Terhaar has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Christian Oliver Paschereit
TU Berlin
4 shared publications - Kilian Oberleithner
Laboratory for Flow Instabilities and Dynamics, Technische Universität Berlin, 10623 Berlin, Germany
2 shared publications Bernhard C. Bobusch
Chair of Fluid Dynamics Hermann-Föttinger-Institut, Technische Universität Berlin, Müller-Breslau-Str. 8, 10623 Berlin, Germany
1 shared publicationBernhard Ćosić
Chair of Fluid Dynamics Hermann-Föttinger-Institut, Technische Universität Berlin, Müller-Breslau-Str. 8, Berlin 10623, Germany
1 shared publicationOliver Krüger
Chair of Fluid Dynamics Hermann-Föttinger-Institut, Technische Universität Berlin, Müller-Breslau-Str. 8, Berlin 10623, Germany
1 shared publicationP. Paredes
School of Aeronautics, Universidad Politécnica de Madrid, Pza. Cardenal Cisneros 3, E-28040 Madrid, Spain
1 shared publication
Latest Publications
- Open Access
- 1 January 2015
- Published by Elsevier in Procedia IUTAM
- Vol. 14, 553-562
Investigation of the Global Mode in Swirling Combustor Flows: Experimental Observations and Local and Global Stability Analysis
- 1 January 2015
- Published by Elsevier in Procedia IUTAM
- Vol. 14, 553-562
Open AccessInvestigation of the Global Mode in Swirling Combustor Flows: Experimental Observations and Local and Global Stability Analysis
- 28 October 2014
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 137 (4) , 041503
Flow Field and Flame Dynamics of Swirling Methane and Hydrogen Flames at Dry and Steam Diluted Conditions
The majority of recent stationary gas turbine combustors employ swirling flows for flame stabilization. The swirling flow undergoes vortex breakdown (VB) and exhibits a complex flow field including zones of recirculating fluid and regions of high shear intensities. Often, self-excited helical flow instabilities, which manifest in a precession of the vortex core, are found in these flows and may influence the combustion process in beneficial and adverse ways. In the present study, we investigate the occurrence and shape of self-excited hydrodynamic instabilities and their impact on heat release fluctuations and mixing characteristics over a wide range of operating conditions. We employ high-speed stereoscopic particle image velocimetry (S-PIV) and simultaneous OH*-chemiluminescence imaging to resolve the flow velocities and heat release distribution, respectively. The results reveal four different flame shapes: A detached annular flame, a long trumpet shaped flame, a V flame, and a very short flame anchored near the combustor inlet. The flame shapes were found to closely correlate with the reactivity of the mixture. Highly steam-diluted or very lean flames cause a detachment, whereas hydrogen fuel leads to very short flames. The detached flames feature a helical instability, which, in terms of frequency and shape, is similar to the isothermal case. A complete suppression of the helical structure is found for the V flame. Both the trumpet shaped flame and the very short flame feature helical instabilities of different frequencies and appearances. The phase-averaged OH*-chemiluminescence images show that the helical instabilities cause large-scale heat release fluctuations. The helical structure of the fluctuations is exploited to use a tomographic reconstruction technique. Furthermore, it is shown that the helical instability significantly enhances the mixing between the emanating jet and the central recirculation zone.
- 28 October 2014
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 137 (4) , 041503
Flow Field and Flame Dynamics of Swirling Methane and Hydrogen Flames at Dry and Steam Diluted Conditions
The majority of recent stationary gas turbine combustors employ swirling flows for flame stabilization. The swirling flow undergoes vortex breakdown (VB) and exhibits a complex flow field including zones of recirculating fluid and regions of high shear intensities. Often, self-excited helical flow instabilities, which manifest in a precession of the vortex core, are found in these flows and may influence the combustion process in beneficial and adverse ways. In the present study, we investigate the occurrence and shape of self-excited hydrodynamic instabilities and their impact on heat release fluctuations and mixing characteristics over a wide range of operating conditions. We employ high-speed stereoscopic particle image velocimetry (S-PIV) and simultaneous OH*-chemiluminescence imaging to resolve the flow velocities and heat release distribution, respectively. The results reveal four different flame shapes: A detached annular flame, a long trumpet shaped flame, a V flame, and a very short flame anchored near the combustor inlet. The flame shapes were found to closely correlate with the reactivity of the mixture. Highly steam-diluted or very lean flames cause a detachment, whereas hydrogen fuel leads to very short flames. The detached flames feature a helical instability, which, in terms of frequency and shape, is similar to the isothermal case. A complete suppression of the helical structure is found for the V flame. Both the trumpet shaped flame and the very short flame feature helical instabilities of different frequencies and appearances. The phase-averaged OH*-chemiluminescence images show that the helical instabilities cause large-scale heat release fluctuations. The helical structure of the fluctuations is exploited to use a tomographic reconstruction technique. Furthermore, it is shown that the helical instability significantly enhances the mixing between the emanating jet and the central recirculation zone.
- 18 February 2014
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 136 (7) , 071502
Impact of Shear Flow Instabilities on the Magnitude and Saturation of the Flame Response
Amplitude-dependent flame transfer functions, also denoted as flame describing functions, are valuable tools for the prediction of limit-cycle amplitudes of thermoacoustic instabilities. However, the effects that govern the transfer function magnitude at low and high amplitudes are not yet fully understood. It is shown in the present work that the flame response at perfectly premixed conditions is strongly influenced by the growth rate of vortical structures in the shear layers. An experimental study in a generic swirl-stabilized combustor was conducted in order to measure the amplitude-dependent flame transfer function and the corresponding flow fields subjected to acoustic forcing. The applied measurement techniques included the multi-microphone-method, high-speed OH*-chemiluminescence measurements, and high-speed particle image velocimetry. The flame response and the corresponding flow fields are assessed for three different swirl numbers at 196 Hz forcing frequency. The results show that forcing leads to significant changes in the time-averaged reacting flow fields and flame shapes. A triple decomposition is applied to the time-resolved data, which reveals that coherent velocity fluctuations at the forcing frequency are amplified considerably stronger in the shear layers at low forcing amplitudes than at high amplitudes, which is an indicator for a nonlinear saturation process. The strongest saturation is found for the lowest swirl number, where the forcing additionally detached the flame. For the highest swirl number, the saturation of the vortex amplitude is weaker. Overall, the amplitude-dependent vortex amplification resembles the characteristics of the flame response very well. An application of a linear stability analysis to the time-averaged flow fields at increasing forcing amplitudes yields the decreasing growth rates of shear flow instabilities at the forcing frequency. It therefore successfully predicts a saturation at high forcing amplitudes and demonstrates that the mean flow field and its modifications are of utmost importance for the growth of vortices in the shear layers. Moreover, the results clearly show that the amplification of vortices in the shear layers is an important driver for heat release fluctuations and their saturation.
- 18 February 2014
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 136 (7) , 071502
Impact of Shear Flow Instabilities on the Magnitude and Saturation of the Flame Response
Amplitude-dependent flame transfer functions, also denoted as flame describing functions, are valuable tools for the prediction of limit-cycle amplitudes of thermoacoustic instabilities. However, the effects that govern the transfer function magnitude at low and high amplitudes are not yet fully understood. It is shown in the present work that the flame response at perfectly premixed conditions is strongly influenced by the growth rate of vortical structures in the shear layers. An experimental study in a generic swirl-stabilized combustor was conducted in order to measure the amplitude-dependent flame transfer function and the corresponding flow fields subjected to acoustic forcing. The applied measurement techniques included the multi-microphone-method, high-speed OH*-chemiluminescence measurements, and high-speed particle image velocimetry. The flame response and the corresponding flow fields are assessed for three different swirl numbers at 196 Hz forcing frequency. The results show that forcing leads to significant changes in the time-averaged reacting flow fields and flame shapes. A triple decomposition is applied to the time-resolved data, which reveals that coherent velocity fluctuations at the forcing frequency are amplified considerably stronger in the shear layers at low forcing amplitudes than at high amplitudes, which is an indicator for a nonlinear saturation process. The strongest saturation is found for the lowest swirl number, where the forcing additionally detached the flame. For the highest swirl number, the saturation of the vortex amplitude is weaker. Overall, the amplitude-dependent vortex amplification resembles the characteristics of the flame response very well. An application of a linear stability analysis to the time-averaged flow fields at increasing forcing amplitudes yields the decreasing growth rates of shear flow instabilities at the forcing frequency. It therefore successfully predicts a saturation at high forcing amplitudes and demonstrates that the mean flow field and its modifications are of utmost importance for the growth of vortices in the shear layers. Moreover, the results clearly show that the amplification of vortices in the shear layers is an important driver for heat release fluctuations and their saturation.
- 20 September 2012
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 134 (11) , 111501
Effects of Outlet Boundary Conditions on the Reacting Flow Field in a Swirl-Stabilized Burner at Dry and Humid Conditions
During the design and testing process of swirl-stabilized combustors, it is often impractical to maintain identical outlet boundary conditions. Furthermore, it is a common practice to intentionally change the acoustic boundary conditions of the outlet in order to suppress thermoacoustic instabilities. In the presented work the susceptibility of the reacting flow field to downstream perturbations is assessed by the application of an area contraction at the outlet. Since combustion and fuel composition are shown to be important parameters for the influence of the boundary conditions on the flow field, highly steam diluted flames are investigated in addition to dry flames at different equivalence ratios and degrees of swirl. The applied measurement techniques include particle image velocimetry, laser doppler velocimetry, and emission analysis. The results reveal a clear correlation of the susceptibility of the flow field to downstream perturbations to both the inlet swirl number and the amount of dilatation caused by the flame. The concept of an effective swirl number downstream of the flame is applied to the results and is proven to be the dominating parameter. A theoretical explanation for the influence of this parameter is provided by the usage of the well known theory of subcritical and supercritical swirling flows, where perturbations can propagate upstream solely in subcritical flows via standing waves. Knowledge of the flow state is of particular importance for the evaluation of combustion tests with differing exit boundary conditions and the results emphasize the need for realistic exit boundary conditions for numerical simulations.
- 20 September 2012
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 134 (11) , 111501
Effects of Outlet Boundary Conditions on the Reacting Flow Field in a Swirl-Stabilized Burner at Dry and Humid Conditions
During the design and testing process of swirl-stabilized combustors, it is often impractical to maintain identical outlet boundary conditions. Furthermore, it is a common practice to intentionally change the acoustic boundary conditions of the outlet in order to suppress thermoacoustic instabilities. In the presented work the susceptibility of the reacting flow field to downstream perturbations is assessed by the application of an area contraction at the outlet. Since combustion and fuel composition are shown to be important parameters for the influence of the boundary conditions on the flow field, highly steam diluted flames are investigated in addition to dry flames at different equivalence ratios and degrees of swirl. The applied measurement techniques include particle image velocimetry, laser doppler velocimetry, and emission analysis. The results reveal a clear correlation of the susceptibility of the flow field to downstream perturbations to both the inlet swirl number and the amount of dilatation caused by the flame. The concept of an effective swirl number downstream of the flame is applied to the results and is proven to be the dominating parameter. A theoretical explanation for the influence of this parameter is provided by the usage of the well known theory of subcritical and supercritical swirling flows, where perturbations can propagate upstream solely in subcritical flows via standing waves. Knowledge of the flow state is of particular importance for the evaluation of combustion tests with differing exit boundary conditions and the results emphasize the need for realistic exit boundary conditions for numerical simulations.