Heinz Berke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Heinz Berke has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Helmut W. Schmalle
Institute of Inorganic Chemistry, University of Zürich, Winterthurerstrasse 190, CH-8057 Zürich, Switzerland
13 shared publications- Olivier Blacque
Department of Chemistry, University of Zurich, Winterthurerstrasse 190, 8057 Zurich, Switzerland
10 shared publications - Koushik Venkatesan
School of Natural Sciences Macquarie University North Ryde Australia
7 shared publications Thomas Fox
Institute of Inorganic Chemistry, University of Zürich, Winterthurerstrasse 190, CH-8057 Zürich, Switzerland
7 shared publicationsSohrab Kheradmandan
Anorganisch-Chemisches Institut der Universität Zürich, Winterthurerstrasse 190, 8057 Zurich, Switzerland
4 shared publicationsHeiko Jacobsen
Anorganisch-chemisches Institut der Universität Zürich Winterthurerstrasse 190, 8057 Zürich, Switzerland, Fax: (internat.) + 41-1/635-6802
3 shared publications
Latest Publications
- 16 July 2013
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2013 (26) , 4574-4584
Manganese and Rhenium Formyl Complexes of Diphosphanylborane Ligands: Stabilization of the Formyl Unit from Intramolecular B–O Bond Formation
Several manganese(I) and rhenium(I) carbonyl complexes of the chelating diphosphanylborane ligands Ph2PCH(PPh2)CH2B(C8H14) (1) and Ph2PCH2CH[B(C8H14)]PPh2 (2) were prepared to study Lewis acid assisted stoichiometric CO reductions. The phosphanylborane complexes fac,cis‐Mn(CO)3(1)(Br) (3a), fac,cis‐Re(CO)3(1)(Br) (4a), fac,cis‐Mn(CO)3(2)(Br) (5a), and fac,cis‐Re(CO)3(2)(Br) (6a) were obtained from the reactions of Mn(CO)5Br or Re(CO)5Br with diphosphanylborane ligands 1 and 2. Further treatment of all four complexes with one equivalent of AgBF4 in CH2Cl2 in the dark followed by 1 atm of CO afforded the corresponding monocationic complexes [Mn(CO)4(1)][BF4] (3b), [Re(CO)4(1)][BF4] (4b), [Mn(CO)4(2)][BF4] (5b), and [Re(CO)4(2)](BF4) [6b]. An X‐ray diffraction study confirmed the expected molecular structure of 3b. In addition to NMR and elemental analysis characterizations, the structures of these complexes could be unambiguously assigned based on two major ν(CO) IR bands, which established the cis‐(CO)4 local ligand environment. The cationic complexes 3b, 4b, 5b, and 6b were tested for stoichiometric CO reductions by reaction with NaHBEt3 in chlorobenzene. However, the reductions of the complexes 3b and 4b produced mixtures of formyl and hydride species. The reaction of complexes 5b and 6b led to the formation of the stable formyl derivatives [Mn(CHO)(CO)3(2)] (5c) and [Re(CHO)(CO)3(2)] (6c), which were isolated in pure form and characterized by spectroscopic means. In addition, 5c could be characterized by a single‐crystal X‐ray study, which revealed the formyl structure and a stabilizing coordination of the pendant Lewis acidic B(C8H14) group to the formyl oxygen atom.
- 16 July 2013
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2013 (26) , 4574-4584
Manganese and Rhenium Formyl Complexes of Diphosphanylborane Ligands: Stabilization of the Formyl Unit from Intramolecular B–O Bond Formation
Several manganese(I) and rhenium(I) carbonyl complexes of the chelating diphosphanylborane ligands Ph2PCH(PPh2)CH2B(C8H14) (1) and Ph2PCH2CH[B(C8H14)]PPh2 (2) were prepared to study Lewis acid assisted stoichiometric CO reductions. The phosphanylborane complexes fac,cis‐Mn(CO)3(1)(Br) (3a), fac,cis‐Re(CO)3(1)(Br) (4a), fac,cis‐Mn(CO)3(2)(Br) (5a), and fac,cis‐Re(CO)3(2)(Br) (6a) were obtained from the reactions of Mn(CO)5Br or Re(CO)5Br with diphosphanylborane ligands 1 and 2. Further treatment of all four complexes with one equivalent of AgBF4 in CH2Cl2 in the dark followed by 1 atm of CO afforded the corresponding monocationic complexes [Mn(CO)4(1)][BF4] (3b), [Re(CO)4(1)][BF4] (4b), [Mn(CO)4(2)][BF4] (5b), and [Re(CO)4(2)](BF4) [6b]. An X‐ray diffraction study confirmed the expected molecular structure of 3b. In addition to NMR and elemental analysis characterizations, the structures of these complexes could be unambiguously assigned based on two major ν(CO) IR bands, which established the cis‐(CO)4 local ligand environment. The cationic complexes 3b, 4b, 5b, and 6b were tested for stoichiometric CO reductions by reaction with NaHBEt3 in chlorobenzene. However, the reductions of the complexes 3b and 4b produced mixtures of formyl and hydride species. The reaction of complexes 5b and 6b led to the formation of the stable formyl derivatives [Mn(CHO)(CO)3(2)] (5c) and [Re(CHO)(CO)3(2)] (6c), which were isolated in pure form and characterized by spectroscopic means. In addition, 5c could be characterized by a single‐crystal X‐ray study, which revealed the formyl structure and a stabilizing coordination of the pendant Lewis acidic B(C8H14) group to the formyl oxygen atom.
- 10 May 2013
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2013 (18) , 3155-3166
Coordination Properties of Multidentate Phosphanylborane Ligands in Tungsten Nitrosyl Complexes
The ambiphilic and small‐bite‐angle diphosphanylborane ligands Ph2PCH(PPh2)CH2B(C8H14) (2) and Ph2PCH2CH[B(C8H14)]PPh2 (3) containing the Lewis acidic 9‐boranorbornyl group B(C8H14) have been prepared in one step by regioselective anti‐Markovnikov hydroborations of 1,1‐bis(diphenylphosphanyl)ethylene and 1,2‐bis(diphenylphosphanyl)ethylene with 9‐borabicyclo[3.3.1]nonane (9‐BBN) under relatively drastic reaction condition. The coordination properties of Ph2PCH2CH2B(C8H14) (1) and the newly prepared 2 and 3 towards the tungsten nitrosyl fragment {WNO}6 have been studied structurally and spectroscopically. Herein, we report the cis and trans tungsten nitrosyl complexes cis‐[W(CO)2(1)2(NO)(Cl)] (cis‐4a), cis‐[W(CO)2(1)2(NO)(H)] (cis‐4b), trans‐[W(CO)2(1)2(NO)(Cl)] (trans‐4a), trans‐[W(CO)2(1)2(NO)(H)] (trans‐4b), cis‐[W(CO)2(2)(NO)(Cl)] (cis‐5a), cis‐[W(CO)2(2)(NO)(H)] (cis‐5b), cis‐[W(CO)2(3)(NO)(Cl)] (cis‐6a), cis‐[W(CO)2(3)(NO)(H)] (cis‐6b), which were readily obtained from straightforward ligand‐substitution reactions of the tungsten carbonyl nitrosyl precursor [W(NO)(CO)4(ClAlCl3)] in tetrahydrofuran. The crystal structures of the tungsten chloride complexes cis‐4a, trans‐4a, and cis‐5a revealed that the trialkyl boron centers are free pendants in the secondary coordination spheres, whereas in the hydride complexes trans‐4b, cis‐5b, and cis‐6b the hydride ligand trans to the nitrosyl ligand is σ coordinated to the tethered B(C8H14) group and form three‐center, two‐electron (3c–2e) W–H–B bonds, which were observed in their crystal structures. The authenticity of the 3c–2e W–H–B bond in the tungsten hydride complex cis‐5b was further checked by a DFT structural optimization and natural bond order (NBO) analysis.
- 10 May 2013
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2013 (18) , 3155-3166
Coordination Properties of Multidentate Phosphanylborane Ligands in Tungsten Nitrosyl Complexes
The ambiphilic and small‐bite‐angle diphosphanylborane ligands Ph2PCH(PPh2)CH2B(C8H14) (2) and Ph2PCH2CH[B(C8H14)]PPh2 (3) containing the Lewis acidic 9‐boranorbornyl group B(C8H14) have been prepared in one step by regioselective anti‐Markovnikov hydroborations of 1,1‐bis(diphenylphosphanyl)ethylene and 1,2‐bis(diphenylphosphanyl)ethylene with 9‐borabicyclo[3.3.1]nonane (9‐BBN) under relatively drastic reaction condition. The coordination properties of Ph2PCH2CH2B(C8H14) (1) and the newly prepared 2 and 3 towards the tungsten nitrosyl fragment {WNO}6 have been studied structurally and spectroscopically. Herein, we report the cis and trans tungsten nitrosyl complexes cis‐[W(CO)2(1)2(NO)(Cl)] (cis‐4a), cis‐[W(CO)2(1)2(NO)(H)] (cis‐4b), trans‐[W(CO)2(1)2(NO)(Cl)] (trans‐4a), trans‐[W(CO)2(1)2(NO)(H)] (trans‐4b), cis‐[W(CO)2(2)(NO)(Cl)] (cis‐5a), cis‐[W(CO)2(2)(NO)(H)] (cis‐5b), cis‐[W(CO)2(3)(NO)(Cl)] (cis‐6a), cis‐[W(CO)2(3)(NO)(H)] (cis‐6b), which were readily obtained from straightforward ligand‐substitution reactions of the tungsten carbonyl nitrosyl precursor [W(NO)(CO)4(ClAlCl3)] in tetrahydrofuran. The crystal structures of the tungsten chloride complexes cis‐4a, trans‐4a, and cis‐5a revealed that the trialkyl boron centers are free pendants in the secondary coordination spheres, whereas in the hydride complexes trans‐4b, cis‐5b, and cis‐6b the hydride ligand trans to the nitrosyl ligand is σ coordinated to the tethered B(C8H14) group and form three‐center, two‐electron (3c–2e) W–H–B bonds, which were observed in their crystal structures. The authenticity of the 3c–2e W–H–B bond in the tungsten hydride complex cis‐5b was further checked by a DFT structural optimization and natural bond order (NBO) analysis.
- 11 December 2009
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 29 (1) , 125-133
Activation of Terminal Alkynes by Frustrated Lewis Pairs
- 11 December 2009
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 29 (1) , 125-133
Activation of Terminal Alkynes by Frustrated Lewis Pairs
- 15 October 2007
- Published by Elsevier in Journal of Organometallic Chemistry
- Vol. 692 (22) , 4875-4885
NH-functionalized tungsten complexes of 2-(dimethylphosphino)imidazole
- 15 October 2007
- Published by Elsevier in Journal of Organometallic Chemistry
- Vol. 692 (22) , 4875-4885
NH-functionalized tungsten complexes of 2-(dimethylphosphino)imidazole
- 2 August 2007
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- No. 34,p. 3571-3573
Dehydrocoupling of dimethylamine-borane catalysed by rhenium complexes and its application in olefin transfer-hydrogenations
Re(I) complexes are applied as catalysts for the dehydrocoupling of Me2NH·BH3 and the transfer-hydrogenation of olefins.
- 2 August 2007
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- No. 34,p. 3571-3573
Dehydrocoupling of dimethylamine-borane catalysed by rhenium complexes and its application in olefin transfer-hydrogenations
Re(I) complexes are applied as catalysts for the dehydrocoupling of Me2NH·BH3 and the transfer-hydrogenation of olefins.
- 17 July 2007
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- No. 32,p. 3562-3571
Developing iron nitrosyl complexes as NO donor prodrugs
A novel class of water-soluble iron nitrosyl complexes has been developed for use as NO donor prodrugs. To elaborate these NO prodrugs various water-soluble ligands were used such as P(CH2OH)3, 1,3,5-triaza-7-phosphatricyclo[3.3.1.1]decane (PTA), 1,2-bis[bis(hydroxymethyl)phosphino]ethane (HMPE), 1,2-bis[bis(hydroxymethyl)phosphino]benzene (TMBz), cysteamine, cysteamine hydrochloride, L-cysteine ethyl ester hydrochloride (LCEE) and pyrimidine-2-thiol (pyrim). The mononuclear complexes Fe(NO)2P(CH2OH)3Cl 1, Fe(NO)2(P(CH2OH)3)22, Fe(NO)2(PTA)23, Fe(NO)2HMPE 4, Fe(NO)2TMBz 5, [Fe(NO)2pyrimI] 10, [Fe(NO)3P(CH2OH)3][X] (X = PF6, SbF6, BF4) 11–13 and the dinuclear species [Fe(NO)2S(CH2)2NH3Cl]26a, [Fe(NO)2S(CH2)2NH3I2] 6b, [Fe(NO)2LCEE]28 and [Fe(NO)2pyrim]29 were obtained. Complexes 1, 2, 4, 6a, 6b, 11, 12 and 13 are water-soluble. 1, 2 and 4 were identified as nitroxyl and 6a, 6b, 11, 12 and 13 as nitric oxide donors by applying an EPR NO-trap assay. To determine the amount of nitric oxide which was released from the nitric oxide donors, an additional electrochemical methodology was used. The equilibrium release or the trapping concentration of NO was also studied by a UV-vis method, which allowed the rate constant of NO release to be determined.
- 17 July 2007
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- No. 32,p. 3562-3571
Developing iron nitrosyl complexes as NO donor prodrugs
A novel class of water-soluble iron nitrosyl complexes has been developed for use as NO donor prodrugs. To elaborate these NO prodrugs various water-soluble ligands were used such as P(CH2OH)3, 1,3,5-triaza-7-phosphatricyclo[3.3.1.1]decane (PTA), 1,2-bis[bis(hydroxymethyl)phosphino]ethane (HMPE), 1,2-bis[bis(hydroxymethyl)phosphino]benzene (TMBz), cysteamine, cysteamine hydrochloride, L-cysteine ethyl ester hydrochloride (LCEE) and pyrimidine-2-thiol (pyrim). The mononuclear complexes Fe(NO)2P(CH2OH)3Cl 1, Fe(NO)2(P(CH2OH)3)22, Fe(NO)2(PTA)23, Fe(NO)2HMPE 4, Fe(NO)2TMBz 5, [Fe(NO)2pyrimI] 10, [Fe(NO)3P(CH2OH)3][X] (X = PF6, SbF6, BF4) 11–13 and the dinuclear species [Fe(NO)2S(CH2)2NH3Cl]26a, [Fe(NO)2S(CH2)2NH3I2] 6b, [Fe(NO)2LCEE]28 and [Fe(NO)2pyrim]29 were obtained. Complexes 1, 2, 4, 6a, 6b, 11, 12 and 13 are water-soluble. 1, 2 and 4 were identified as nitroxyl and 6a, 6b, 11, 12 and 13 as nitric oxide donors by applying an EPR NO-trap assay. To determine the amount of nitric oxide which was released from the nitric oxide donors, an additional electrochemical methodology was used. The equilibrium release or the trapping concentration of NO was also studied by a UV-vis method, which allowed the rate constant of NO release to be determined.
- 29 January 2007
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- No. 11,p. 1091-1100
Organometallic manganese complexes as scaffolds for potential molecular wires
This article reviews recent work in the area of organomanganese chemistry designing organometallic based molecular wires for potential applications in molecular electronics utilising the bottom-up approach. The field of molecular electronics has recently received much attention in the pursuit of continued miniaturization of electronics. Molecular wires that can allow a through-bridge exchange of an electron/electron hole between its remote ends/terminal groups are the basic motifs of single electron devices. Our recent work in this field has been the design and development of transition-metal complexes with a special emphasis on the half sandwich dinuclear manganese complexes and the bis dmpe dinuclear MnII/MnII. In this review, we would like to highlight the importance of the nature of the transition metal and their significant effect on the redox process, which is of paramount importance for the design of systems that could be ultimately wired into circuits for various applications.
- 29 January 2007
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- No. 11,p. 1091-1100
Organometallic manganese complexes as scaffolds for potential molecular wires
This article reviews recent work in the area of organomanganese chemistry designing organometallic based molecular wires for potential applications in molecular electronics utilising the bottom-up approach. The field of molecular electronics has recently received much attention in the pursuit of continued miniaturization of electronics. Molecular wires that can allow a through-bridge exchange of an electron/electron hole between its remote ends/terminal groups are the basic motifs of single electron devices. Our recent work in this field has been the design and development of transition-metal complexes with a special emphasis on the half sandwich dinuclear manganese complexes and the bis dmpe dinuclear MnII/MnII. In this review, we would like to highlight the importance of the nature of the transition metal and their significant effect on the redox process, which is of paramount importance for the design of systems that could be ultimately wired into circuits for various applications.
- 12 October 2006
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 36 (1) , 15-30
The invention of blue and purple pigments in ancient times
This tutorial review examines manmade blue and purple pigments appearing in antiquity. They were obtained by chemical synthesis from mineral starting materials and refer to chemical compounds: Egyptian Blue (CaCuSi4O10), Han Blue (BaCuSi4O10) and Han Purple (BaCuSi2O6), Maya Blue (x·indigo·(Mg,Al)4Si8(O,OH,H2O)24) and Ultramarine Blue (Na,Ca)8(AlSiO12)(S, SO4,Cl). The Egyptian and Chinese copper-based pigments are assumed to have been developed independently and are presumably an outcome of the historical developments in glazing techniques. A technology transfer from Egypt into China cannot be fully excluded but, based on the facts acquired up to now, looks less probable.
- 12 October 2006
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 36 (1) , 15-30
The invention of blue and purple pigments in ancient times
This tutorial review examines manmade blue and purple pigments appearing in antiquity. They were obtained by chemical synthesis from mineral starting materials and refer to chemical compounds: Egyptian Blue (CaCuSi4O10), Han Blue (BaCuSi4O10) and Han Purple (BaCuSi2O6), Maya Blue (x·indigo·(Mg,Al)4Si8(O,OH,H2O)24) and Ultramarine Blue (Na,Ca)8(AlSiO12)(S, SO4,Cl). The Egyptian and Chinese copper-based pigments are assumed to have been developed independently and are presumably an outcome of the historical developments in glazing techniques. A technology transfer from Egypt into China cannot be fully excluded but, based on the facts acquired up to now, looks less probable.
- 28 June 2006
- Published by Wiley in Chemistry – A European Journal
- Vol. 12 (20) , 5199-5209
Metal Nitrosyl Reactivity: Acetonitrile‐Promoted Insertion of an Alkylidene into a Nitrosyl Ligand with Fission of the NO Bond
Treatment of the complexes [Re(NO)2(PR3)2][BArF4] (R = Cy, 1 a; R = iPr, 1 b) with phenyldiazomethane gave the cationic benzylidene species [Re{CH(C6H5)}(NO)2(PR3)2][BArF4] (2 a and 2 b) in good yields. Upon reaction of 2 a and 2 b with acetonitrile, the consecutive formation of [Re(NCCH3)(NCPh)(NO)(OC(CH3)NH)(PR3)][BArF4] (3 a and 3 b) and [Re(NCCH3)(OC{CH3}NH{C6H5})(NO)(PR3)2][BArF4] (4 a and 4 b) was observed. The proposed reaction sequence involves the coupling of coordinated NO, carbene and acetonitrile molecules to yield the (1Z)‐N‐[imino(phenyl)methyl]ethanimidate ligand. The coupling of the nitrosyl and the benzylidene is anticipated to occur first, forming an oximate species. The subsequent acetonitrile addition can be envisaged as a heteroene reaction of the oximate and the acetonitrile ligand yielding 3 a and 3 b, which in turn can cyclise and undergo a prototropic shift initiated by an internal attack of the ethaneimidate ligand on the benzonitrile moiety to afford 4 a and 4 b.
- 28 June 2006
- Published by Wiley in Chemistry – A European Journal
- Vol. 12 (20) , 5199-5209
Metal Nitrosyl Reactivity: Acetonitrile‐Promoted Insertion of an Alkylidene into a Nitrosyl Ligand with Fission of the NO Bond
Treatment of the complexes [Re(NO)2(PR3)2][BArF4] (R = Cy, 1 a; R = iPr, 1 b) with phenyldiazomethane gave the cationic benzylidene species [Re{CH(C6H5)}(NO)2(PR3)2][BArF4] (2 a and 2 b) in good yields. Upon reaction of 2 a and 2 b with acetonitrile, the consecutive formation of [Re(NCCH3)(NCPh)(NO)(OC(CH3)NH)(PR3)][BArF4] (3 a and 3 b) and [Re(NCCH3)(OC{CH3}NH{C6H5})(NO)(PR3)2][BArF4] (4 a and 4 b) was observed. The proposed reaction sequence involves the coupling of coordinated NO, carbene and acetonitrile molecules to yield the (1Z)‐N‐[imino(phenyl)methyl]ethanimidate ligand. The coupling of the nitrosyl and the benzylidene is anticipated to occur first, forming an oximate species. The subsequent acetonitrile addition can be envisaged as a heteroene reaction of the oximate and the acetonitrile ligand yielding 3 a and 3 b, which in turn can cyclise and undergo a prototropic shift initiated by an internal attack of the ethaneimidate ligand on the benzonitrile moiety to afford 4 a and 4 b.
- 5 April 2006
- Published by Wiley in Chemistry – A European Journal
- Vol. 12 (12) , 3325-3338
Unprecedented ROMP Activity of Low‐Valent Rhenium–Nitrosyl Complexes: Mechanistic Evaluation of an Electrophilic Olefin Metathesis System
The reaction of [Re(H)(NO)2(PR3)2] complexes (1 a: R = PCy3; 1 b: R = PiPr3) with [H(OEt2)2][BArF4] ([BArF4] = tetrakis{3,5‐bis(trifluoromethyl)phenyl}borate) in benzene at room temperature gave the corresponding cations [Re(NO)2(PR3)2][BArF4] (2 a and 2 b). The addition of phenyldiazomethane to benzene solutions of 2 a and 2 b afforded the moderately stable cationic rhenium(I)‐benzylidene‐dinitrosyl‐bis(trialkyl)phosphine complexes 3 a and 3 b as [BArF4]− salts in good yields. The complexes 2 a and 2 b catalyze the ring‐opening metathesis polymerization (ROMP) of highly strained nonfunctionalized cyclic olefins to give polymers with relatively high polydispersity indices, high molecular weights and over 80 % Z configuration of the double bonds in the chain backbone. However, these complexes do not show metathesis activity with acyclic olefins. The benzylidene derivatives 3 a and 3 b are almost inactive in ROMP catalysis with norbornene and in olefin metathesis. NMR experiments gave the first hints of the initial formation of carbene complexes from [Re(NO)2(PR3)2][BArF4] (2 a and 2 b) and norbornene. In a detailed mechanistic study ESI‐MS/MS measurements provided further evidence that the carbene formation is initiated by a unique reaction sequence where the cleavage of the strained olefinic bond starts with phosphine migration forming a cyclic ylide–carbene complex, capable of undergoing metathesis with alternating rhenacyclobutane formation and cycloreversion reactions (“ylide” route). However, even at an early stage the ROMP propagation route is expected to merge into an “iminate” route by attack by the ylide function on one of the NNO atoms followed by phosphine oxide elimination. The formation of phosphine oxide was confirmed by NMR spectroscopy. The proposed mechanism is supported further by detailed DFT calculations.
- 5 April 2006
- Published by Wiley in Chemistry – A European Journal
- Vol. 12 (12) , 3325-3338
Unprecedented ROMP Activity of Low‐Valent Rhenium–Nitrosyl Complexes: Mechanistic Evaluation of an Electrophilic Olefin Metathesis System
The reaction of [Re(H)(NO)2(PR3)2] complexes (1 a: R = PCy3; 1 b: R = PiPr3) with [H(OEt2)2][BArF4] ([BArF4] = tetrakis{3,5‐bis(trifluoromethyl)phenyl}borate) in benzene at room temperature gave the corresponding cations [Re(NO)2(PR3)2][BArF4] (2 a and 2 b). The addition of phenyldiazomethane to benzene solutions of 2 a and 2 b afforded the moderately stable cationic rhenium(I)‐benzylidene‐dinitrosyl‐bis(trialkyl)phosphine complexes 3 a and 3 b as [BArF4]− salts in good yields. The complexes 2 a and 2 b catalyze the ring‐opening metathesis polymerization (ROMP) of highly strained nonfunctionalized cyclic olefins to give polymers with relatively high polydispersity indices, high molecular weights and over 80 % Z configuration of the double bonds in the chain backbone. However, these complexes do not show metathesis activity with acyclic olefins. The benzylidene derivatives 3 a and 3 b are almost inactive in ROMP catalysis with norbornene and in olefin metathesis. NMR experiments gave the first hints of the initial formation of carbene complexes from [Re(NO)2(PR3)2][BArF4] (2 a and 2 b) and norbornene. In a detailed mechanistic study ESI‐MS/MS measurements provided further evidence that the carbene formation is initiated by a unique reaction sequence where the cleavage of the strained olefinic bond starts with phosphine migration forming a cyclic ylide–carbene complex, capable of undergoing metathesis with alternating rhenacyclobutane formation and cycloreversion reactions (“ylide” route). However, even at an early stage the ROMP propagation route is expected to merge into an “iminate” route by attack by the ylide function on one of the NNO atoms followed by phosphine oxide elimination. The formation of phosphine oxide was confirmed by NMR spectroscopy. The proposed mechanism is supported further by detailed DFT calculations.