Mario Coniglio
Research Subjects
Mario Coniglio has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Brian R. Pratt
Department of Geological Sciences, University of Saskatchewan, Saskatoon, Saskatchewan S7N 5E2 Canada
1 shared publication- Iain M. Samson
School of the Environment, University of Windsor, Windsor, Canada
1 shared publication - Ihsan S. Al-Aasm
School of the Environment, University of Windsor, 401 Sunset Avenue, Windsor, ON N9B 3P4, Canada
1 shared publication - Michael. Edward Brookfield
Jackson School of Geosciences, University of Texas at Austin, Austin, TX 78712-1692, USA
1 shared publication - Omid Haeri Ardakani
Natural Resources Canada
1 shared publication Qing Zheng
Leling Phoenix Brake Canada Inc., 100 Pinebush Road, Cambridge, ON N1R 8J8
1 shared publication
Latest Publications
- 1 March 2013
- Published by Canadian Society of Petroleum Geologists in Bulletin of Canadian Petroleum Geology
- Vol. 61 (1) , 41-58
Diagenetic evolution and associated mineralization in Middle Devonian carbonates, southwestern Ontario, Canada
The Middle Devonian Lucas Formation of southwestern Ontario, Canada, forms the main hydrocarbon reservoir rocks in the region. Integrated field, petrographic, fluid inclusion and isotope geochemistry reveal a variety of diagenetic processes that include the formation of dolomite, calcite, celestine and fluorite under diverse geochemical conditions. The host carbonate strata display two types of replacive dolomite fabrics: 1) fine-crystalline matrix dolomite (5–20 μm); and 2) medium-crystalline dolomite (50–150 μm) with an average size of 100 μm. Stable oxygen and carbon isotope results for both dolomite fabrics show a wide range of values (δ18O = −9.4‰ to −3.9‰ VPDB, δ13C = 0.4‰ to 3.4‰ VPBD). For late fracture-filling calcite, δ18O and δ13C values range from −9.4 to −5.9‰ VPDB and −7.7‰ to −0.04‰ VPDB, respectively. The 87Sr/86Sr ratios of selected dolomite and calcite samples range from 0.70798–0.70838, preserving Middle Devonian seawater values while some samples have slightly more radiogenic ratios than contemporaneous seawater. Field and petrographic evidence and Sr isotope ratios of dolomite suggest early dolomitization from evaporated seawater in a sabkha setting (shallow seepage reflux or evaporitive pumping). However, the depletion in δ18O (varying from −3.9 to −9.4‰ VPDB), and radiogenic Sr isotope values of the Lucas Formation dolomite are considered to be the result of recrystallization, which is interpreted to occur at elevated temperatures in a burial environment. The 18O-depleted values and slightly radiogenic 87Sr/86Sr ratios of calcite cements suggest precipitation from hot, saline basinal/hydrothermal brines. In addition, the 13C-depleted calcites indicate that carbon was possibly formed by oxidation of organic matter. Fluid inclusions in some of the late calcite cements fluoresce under UV light, indicating the presence of hydrocarbons. Homogenization temperatures of these inclusions vary from 87.1°C to 171.9°C with an average value of 126°C. Average salinity of fluid inclusions is 19.7 wt. % NaCl eq. Celestine samples have lower salinities relative to calcite, averaging 14.5 wt. % NaCl eq. with an average homogenization temperature of 219.5°C. Based on the geochemical and fluid inclusion results, hot, saline basinal/hydrocarbon bearing brines originated from central part of the basin and migrated to Devonian carbonates via fractures and faults. Celestine is a product of thermochemical sulfate reduction and formed due to mixing of saline, Sr and sulfate bearing brines and meteoric waters.
- 1 March 2013
- Published by Canadian Society of Petroleum Geologists in Bulletin of Canadian Petroleum Geology
- Vol. 61 (1) , 41-58
Diagenetic evolution and associated mineralization in Middle Devonian carbonates, southwestern Ontario, Canada
The Middle Devonian Lucas Formation of southwestern Ontario, Canada, forms the main hydrocarbon reservoir rocks in the region. Integrated field, petrographic, fluid inclusion and isotope geochemistry reveal a variety of diagenetic processes that include the formation of dolomite, calcite, celestine and fluorite under diverse geochemical conditions. The host carbonate strata display two types of replacive dolomite fabrics: 1) fine-crystalline matrix dolomite (5–20 μm); and 2) medium-crystalline dolomite (50–150 μm) with an average size of 100 μm. Stable oxygen and carbon isotope results for both dolomite fabrics show a wide range of values (δ18O = −9.4‰ to −3.9‰ VPDB, δ13C = 0.4‰ to 3.4‰ VPBD). For late fracture-filling calcite, δ18O and δ13C values range from −9.4 to −5.9‰ VPDB and −7.7‰ to −0.04‰ VPDB, respectively. The 87Sr/86Sr ratios of selected dolomite and calcite samples range from 0.70798–0.70838, preserving Middle Devonian seawater values while some samples have slightly more radiogenic ratios than contemporaneous seawater. Field and petrographic evidence and Sr isotope ratios of dolomite suggest early dolomitization from evaporated seawater in a sabkha setting (shallow seepage reflux or evaporitive pumping). However, the depletion in δ18O (varying from −3.9 to −9.4‰ VPDB), and radiogenic Sr isotope values of the Lucas Formation dolomite are considered to be the result of recrystallization, which is interpreted to occur at elevated temperatures in a burial environment. The 18O-depleted values and slightly radiogenic 87Sr/86Sr ratios of calcite cements suggest precipitation from hot, saline basinal/hydrothermal brines. In addition, the 13C-depleted calcites indicate that carbon was possibly formed by oxidation of organic matter. Fluid inclusions in some of the late calcite cements fluoresce under UV light, indicating the presence of hydrocarbons. Homogenization temperatures of these inclusions vary from 87.1°C to 171.9°C with an average value of 126°C. Average salinity of fluid inclusions is 19.7 wt. % NaCl eq. Celestine samples have lower salinities relative to calcite, averaging 14.5 wt. % NaCl eq. with an average homogenization temperature of 219.5°C. Based on the geochemical and fluid inclusion results, hot, saline basinal/hydrocarbon bearing brines originated from central part of the basin and migrated to Devonian carbonates via fractures and faults. Celestine is a product of thermochemical sulfate reduction and formed due to mixing of saline, Sr and sulfate bearing brines and meteoric waters.
- 21 May 2004
- Published by Wiley in Sedimentology
- Vol. 51 (3) , 653-668
Reef‐capping laminites in the Upper Silurian carbonate‐ to‐evaporite transition, Michigan Basin, south‐western Ontario
Silurian pinnacle reefs in the subsurface of the south‐western Ontario portion of the Michigan Basin display a variety of laminated carbonates (laminites) within predominantly muddy reef‐capping facies in the upper part of the Guelph Formation and the overlying A‐1 Carbonate of the Salina Group. Laminites, which are limestone, dolomite or partially dolomitized limestones, have a range of morphologies, from simple planar to a variety of wavy and serrated forms. Individual laminae are composed mainly of micrite, microspar or replacive dolomite, and vary internally from isopachous and continuous over the diameter of the core to non‐isopachous and often discontinuous. Clotted and peloidal micrite, sometimes defining small knobs and chambers, is interpreted as being microbial in origin and occurs within all types of laminites. Fibrous cement locally comprises laminite clasts in breccias or coats clasts in breccias, and also occurs as spherulites in the interparticle spaces in breccias. Although similar laminites have been described from elsewhere in the Michigan Basin and interpreted as caliche, travertine and abiotic subtidal stromatolites, the laminites in south‐western Ontario are most realistically regarded as microbial. The causes for the variations in morphology and characteristics of the constituent laminae are uncertain, although fluctuations in local microenvironmental conditions would have been important, set against a backdrop of an increasingly restricted overall setting. Caliche or travertine origins for these laminites are unlikely in general, except perhaps locally at the subaerial exposure surface at the tops of pinnacle reefs.
- 21 May 2004
- Published by Wiley in Sedimentology
- Vol. 51 (3) , 653-668
Reef‐capping laminites in the Upper Silurian carbonate‐ to‐evaporite transition, Michigan Basin, south‐western Ontario
Silurian pinnacle reefs in the subsurface of the south‐western Ontario portion of the Michigan Basin display a variety of laminated carbonates (laminites) within predominantly muddy reef‐capping facies in the upper part of the Guelph Formation and the overlying A‐1 Carbonate of the Salina Group. Laminites, which are limestone, dolomite or partially dolomitized limestones, have a range of morphologies, from simple planar to a variety of wavy and serrated forms. Individual laminae are composed mainly of micrite, microspar or replacive dolomite, and vary internally from isopachous and continuous over the diameter of the core to non‐isopachous and often discontinuous. Clotted and peloidal micrite, sometimes defining small knobs and chambers, is interpreted as being microbial in origin and occurs within all types of laminites. Fibrous cement locally comprises laminite clasts in breccias or coats clasts in breccias, and also occurs as spherulites in the interparticle spaces in breccias. Although similar laminites have been described from elsewhere in the Michigan Basin and interpreted as caliche, travertine and abiotic subtidal stromatolites, the laminites in south‐western Ontario are most realistically regarded as microbial. The causes for the variations in morphology and characteristics of the constituent laminae are uncertain, although fluctuations in local microenvironmental conditions would have been important, set against a backdrop of an increasingly restricted overall setting. Caliche or travertine origins for these laminites are unlikely in general, except perhaps locally at the subaerial exposure surface at the tops of pinnacle reefs.
- 1 June 2003
- Published by Canadian Society of Petroleum Geologists in Bulletin of Canadian Petroleum Geology
- Vol. 51 (2) , 177-199
Dolomitization and recrystallization of middle Silurian reefs and platformal carbonates of the Guelph Formation, Michigan Basin, southwestern Ontario
Regional study of the Guelph Formation (middle Silurian) in the subsurface of southwestern Ontario highlights the role of recrystallization during burial diagenesis in producing massive dolomites with relatively uniform petrographic features but complicated geochemistry. The dolomite is composed mainly of replacive, unimodal to polymodal mosaics characterized by uniform, dull to weak red cathodoluminescence. Whereas patch reefs on the platform and most pinnacle reefs on the upper basin slope are pervasively dolomitized, reefs on more basinward parts of the slope may be partially dolomitized, usually in their lower portions, or they remain limestone. The lithology of overlying carbonates in the lower Salina Group mimics closely that of the underlying Guelph Formation. Initial shallow burial dolomitization occurred in the Late Silurian in response to isolation and hydrological drawdown of the Michigan Basin. The basinward-decreasing dolomite trend resulted from continuous seawater flux from the middle (back reef) platform downward through Guelph limestones to the discharge areas on the slope and beyond. Reefs at the distal end of the regional paleoflow system, or those that were poorly connected to the system remained limestone. Both dolomite δ13C values, which range from +1.1 to +5.0 ‰ (PDB), and 87Sr/86Sr ratios, which range from 0.70845 to 0.70910, reflect a Silurian seawater source. Values for δ18O range from −5.2 to −9.7‰ (PDB) but cannot be explained by the above mechanism alone. Recrystallization likely occurred during the progressive burial of these rocks to depths of up to 2 km, and may at least in part explain the lack of correlation among dolomite crystal size, cathodoluminescence characteristics and the various geochemical parameters measured in this study. The reason for the wide spread in δ18O values both geographically and stratigraphically reflects varying degrees of recrystallization as a function of macro- to micro-scale permeability and porosity differences in the precursor lithology and their control on fluid-rock interactions during recrystallization. The cause of the apparent decrease in dolomite δ18O values from patch reefs on the platform (average δ18O = ~ −6‰) to the lower slope (average δ18O = ~ −8.5‰) is unknown, but may have resulted from a combination of a basinward increase in burial depth and a basinward increase in heat-flow, which are now only subtly preserved through the “noise” of multiple recrystallizations.
- 1 June 2003
- Published by Canadian Society of Petroleum Geologists in Bulletin of Canadian Petroleum Geology
- Vol. 51 (2) , 177-199
Dolomitization and recrystallization of middle Silurian reefs and platformal carbonates of the Guelph Formation, Michigan Basin, southwestern Ontario
Regional study of the Guelph Formation (middle Silurian) in the subsurface of southwestern Ontario highlights the role of recrystallization during burial diagenesis in producing massive dolomites with relatively uniform petrographic features but complicated geochemistry. The dolomite is composed mainly of replacive, unimodal to polymodal mosaics characterized by uniform, dull to weak red cathodoluminescence. Whereas patch reefs on the platform and most pinnacle reefs on the upper basin slope are pervasively dolomitized, reefs on more basinward parts of the slope may be partially dolomitized, usually in their lower portions, or they remain limestone. The lithology of overlying carbonates in the lower Salina Group mimics closely that of the underlying Guelph Formation. Initial shallow burial dolomitization occurred in the Late Silurian in response to isolation and hydrological drawdown of the Michigan Basin. The basinward-decreasing dolomite trend resulted from continuous seawater flux from the middle (back reef) platform downward through Guelph limestones to the discharge areas on the slope and beyond. Reefs at the distal end of the regional paleoflow system, or those that were poorly connected to the system remained limestone. Both dolomite δ13C values, which range from +1.1 to +5.0 ‰ (PDB), and 87Sr/86Sr ratios, which range from 0.70845 to 0.70910, reflect a Silurian seawater source. Values for δ18O range from −5.2 to −9.7‰ (PDB) but cannot be explained by the above mechanism alone. Recrystallization likely occurred during the progressive burial of these rocks to depths of up to 2 km, and may at least in part explain the lack of correlation among dolomite crystal size, cathodoluminescence characteristics and the various geochemical parameters measured in this study. The reason for the wide spread in δ18O values both geographically and stratigraphically reflects varying degrees of recrystallization as a function of macro- to micro-scale permeability and porosity differences in the precursor lithology and their control on fluid-rock interactions during recrystallization. The cause of the apparent decrease in dolomite δ18O values from patch reefs on the platform (average δ18O = ~ −6‰) to the lower slope (average δ18O = ~ −8.5‰) is unknown, but may have resulted from a combination of a basinward increase in burial depth and a basinward increase in heat-flow, which are now only subtly preserved through the “noise” of multiple recrystallizations.