CWChangxiu Wan

Changxiu Wan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Changxiu Wan has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

    • 1 October 2010
      • Vol. 27  (5) , 1047-50

    [Preparation and properties of calcium polyphosphate-based composite scaffold for bone tissue engineering].

    by Dongming Zhang, Jianyun Wang, Tao Zhan, Xiaohua Zhang, Xixun Yu, Changxiu Wan

    Calcium polyphosphate (CPP) is a new type of degradable material for bone repair, yet it is fragile and is not so controllable in regard to degradation. For increasing biological activity and close proximity to natural bone structure, in this experiment, we chose chitosan (CS) and its derivative carboxymethyl chitosan (CMC) as the extracellular matrix structure for the organic phase. Aldehyde sodium alginate (ADA) was used as natural cross-linker. The binary (CPP/CMC) and ternary (CPP/CMC/CS) composite scaffolds were prepared by the "multiple composite-cross-linking method". The degradation laws of the two materials were investigated through the weight loss of scaffolds, the pH value of degradation solution, the compressive strength and the surface morphology characterization. The results showed that the composite scaffolds had good interface and the compressive strength increased greatly, but the organic phase of dual-phase composite scaffolds degraded quickly, while degradation controllability and mechanical properties of ternary composite scaffold were significantly improved. All the above findings show that the method of ternary complex scaffold preparation is useful for the design and preparation of bone tissue engineering materials.

  • Structure and properties of chitosan derivatives modified calcium polyphosphate scaffolds

    by Jianyun Wang, Dongming Zhang, Fei Liu, Xixun Yu, Changsheng Zhao, Changxiu Wan


    • 1 April 2010
      • Vol. 27  (2) , 458-62

    [Recent progress of researches on scaffolds for tissue engineered meniscus].

    by Weili Fu, Jianyun Wang, Changxiu Wan, Jian Li

    Tissue engineered meniscus provides a novel approach for the treatment of severe meniscus injury. The researches on scaffold for tissue engineered meniscus is an essential element. The researches on scaffolds for tissue engineered meniscus, including natural biomaterials and synthetic polymer, have made great advances in recent years. At present, collagen meniscus implants have been used in clinical practice. As hydrogel is characterized by having high water content and good biocompatibility, being similar to extracellular matrix in structure, and being able to provide access to microsurgery, it has become the hotspot field in recent years. Meanwhile, the combinatorial scaffold material advantages of biological composite tissue engineered scaffolds also illuminate the key point of research on meniscal scaffolds. This paper reviews the recent progress in betterment of the scaffolds so as to provide a theoretical and practical basis for further researches of tissue engineered meniscus.

  • Open Access

    Effect of sintering time on the microstructure and properties of inorganic polyphosphate bioceramics

    by Q.G. Wang, C.X. Wan

    Sintering is an important step in the fabrication process of ceramic bodies, which can significantly affect the microstructure and properties of materials. In this article, calcium based inorganic polyphosphate (CPP) bioceramics were synthesized by gravity sintering. Effects of the sintering time (30 minutes, 1 hour, 3 hours and 5 hours) on the microstructure, physicochemical degradation and mechanical property were investigated. It was found that all prepared CPP samples for various sintering times showed a ?-CPP phase at the temperature of 800?C. The sample morphology changed to more compact with extending the sintering time from 30 minutes to 5 hours. Moreover, the grain size increased with the increase of sintering time, from 1.59 ?m for 30 minutes to 3.40 ?m for 5 hours. The in vitro degradation test revealed that the degradation velocity had an inverse relationship with the sintering time. The CPP samples sintering for 30 minutes showed the fastest degradation, while CPP sintering for 5 hours was the slowest one. Compression test results showed that longer sintering times led to improved mechanical properties.


  • In vivo study of porous strontium-doped calcium polyphosphate scaffolds for bone substitute applications

    by Meng Tian, Feng Chen, Wei Song, Yancheng Song, Yuanwei Chen, Changxiu Wan, Xixun Yu, Xiaohua Zhang

    The purpose of this study was to investigate in vivo biocompatibility and osteogenesis as well as degradability of the porous strontium-doped calcium polyphosphate (SCPP) scaffolds as a biomaterial for bone substitute applications. The evaluation was performed on a rabbit model over a period of 16 weeks by histology combined with image analysis, X-ray microradiography and immunohistochemistry methods. The histological and X-ray microradiographic results showed that the SCPP scaffold exhibited good biocompatibility and extensive osteoconductivity with host bone. Moreover, a significant more bone formation was observed in the SCPP group compared with that in the CPP group, especially at the initial stage after implantation. New bone volumes (NBVs) of the SCPP group determined at week 4, 8 and 16 were 14, 27 and 45%, respectively. Accordingly, NBVs of the CPP group were 10, 19 and 40%. Immunohistochemical results revealed that both the expression of collagen type I and bone morphogenetic proteins in the SCPP group were higher than that in the CPP group, which might be associated with the release of strontium ions during the implantation. In addition, during 16 weeks implantation the SCPP scaffold exhibited similar degradability with the CPP scaffold in vivo. Both scaffolds showed the greatest degradation rate for the first 4 weeks, and then the degradation rate gradually decreased. The results presented in this study demonstrated that SCPP scaffold can be considered as a biocompatible material, making it attractive for bone substitute application purposes.


  • Open Access

    Degradation kinetics of calcium polyphosphate bioceramic: an experimental and theoretical study

    by Qianbin Wang, Qiguang Wang, Jianyun Wang, Xiaohua Zhang, Xixun Yu, Changxiu Wan

    In this work, the degradation kinetics of calcium polyphosphate bioceramic was studied. Liquid state31P nuclear magnetic resonance (NMR), X-ray diffraction (XRD) and scanning electron microscope (SEM) were used to characterize the product. The in vitro degradation test was carried out at 37 ºC for up to 48 hours for both the simulation solution and the extreme solution. The ion concentrations were measured and analyzed by establishing a mathematical model referring to the chemical reaction kinetics. The results indicated that the degradability of calcium polyphosphate increased with the decrease of pH value, and the sample showed a rapid loss of ion concentration within the initial period of immersion followed by a slower loss ratio. The relationship between ion concentration and the degradation time coincided with Boxlucas model


    • 1 December 2008
      • Vol. 25  (6) , 1344-8

    [The hydrophilicity and cell affinity of polylactic acid containg bionic function group of phosphorylcholine].

    by Juan Luo, Lijian Wang, Yuanwei Chen, Xianglin Luo, Nianchao Chen, Changxiu Wan, Xiaohua Zhang

    A series of novel biodegradable and bionic functional polymers, PLLA-PC-PLLA, were synthesized using L-lactide ring-opening polymerization by L-a-Glycerophosphorylcholine (PC) from nature source. The hydrophilicity of the polymers was investigated. The results made known that, as PC group was brought into the backbone of PLLA, PLLA-PC-PLLA gained much better hydrophilicity than did PLLA, and polar phosphatidylcholines probably transferred to the sample surface in aqueous environment. The relative growth ratios of ECV304 cells to the lixivium of all PLLA-PC-PLLA were higher than 84% in 5 d culture. The cells adhesion of ECV304 on the films of PLLA-PC-PLLA lagged as compared to that on PLLA, but they could proliferate and cover the films in total. The difference between PLLA-PC-PLLA and PLLA was due to the existence of PC group. Thus, PLLA-PC-PLLA, the same as PLLA, are not cytotoxic, and ECV304 can attach and proliferate on them. PLLA-PC-PLLA have potential applications in the fields of tissue engineering and drug delivery system.

  • A collagen based vitro model of angiogenesis designed for tissue-engineering material

    by Ting Feng, Yuanwei Chen, Guoqi Shi, Xixun Yu, Changxiu Wan


  • The study on the degradation and mineralization mechanism of ion‐doped calcium polyphosphate in vitro

    by Wei Song, Meng Tian, Feng Chen, Yefei Tian, Changxiu Wan, Xixun Yu

    Doping with different trace elements can significantly change the original degradability, mineralization, and biological properties of bone repair material. According to the fundamental research on prepared calcium polyphosphate (CPP) as a bone repair material by our group, this article began further exploration on the effect of doping different trace elements (K, Na, Mg, Zn, Sr) into CPP on its degradability and mineralization soaking in simulated body fluids. The results indicated that doped elements significantly changed the lattice parameters and cell volume of crystal, resulted in different types of crystal defect and surface charge distribution, and consequently changed the original degradability and mineralization of CPP. The conclusion is that doped ions with relatively smaller ionic radius and equivalent positive charge compared with Ca2+ can greatly promote the degradability and mineralization of CPP, whereas doped ions with equivalent ionic radius and diverse positive charges compared with Ca2+ provide less contribution on promoting the degradability and mineralization or even counteract. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009


  • Research of the degradation products of chitosan's angiogenic function

    by Jianyun Wang, Yuanwei Chen, Yulong Ding, Guoqi Shi, Changxiu Wan