Brett L. Allen
Research Subjects
Brett L. Allen has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Upendra M. Sainju
Northern Plains Agricultural Research Laboratory, Agricultural Research Service, U.S. Department of Agriculture, Sidney, MT 59270, USA
3 shared publications Verlan L. Cochran
USDA‐ARS 501 L West Rd. Palouse WA 99161‐9619
2 shared publicationsA. W. Lenssen
2104 Agronomy Hall Iowa State Univ. Ames IA 50011
1 shared publication- Andrew William Lenssen
Department of Agronomy Iowa State University Ames Iowa USA
1 shared publication Donald L. Tanaka
Northern Great Plains Research Laboratory
1 shared publicationJ. D. Jabro
USDA-ARS Northern Plains Agricultural Research Lab. Sidney MT 59270
1 shared publication
Latest Publications
- 1 January 2017
- Published by American Society of Agricultural and Biological Engineers (ASABE) in Applied Engineering in Agriculture
- Vol. 33 (6) , 849-857
A New Automated Passive Capillary Lysimeter for Logging Real-Time Drainage Water Fluxes
Abstract.: Effective monitoring of chemical transport through the soil profile requires accurate and appropriate instrumentation to measure drainage water fluxes below the root zone of cropping systems. The objectives of this study were to methodically describe in detail the construction and installation of a novel automated PCAP (passive capillary) lysimeter design, and to evaluate the efficacy of this design for logging and monitoring real-time drainage water fluxes occurring below the root zone of corn ( L.) and soybean ( L.) under an overhead sprinkler irrigation system. Sixteen cylindrical PCAP lysimeters with outside dimensions of 32.39 cm in diameter ×74.8 cm height (1000 cm2 surface area) were designed, constructed, and placed 90 cm below the soil surface in a Lihen sandy loam. Two watermark soil moisture and temperature sensors were positioned at 30 and 76 cm depths above each PCAP to monitor soil temperature and water potential continuously. This new design incorporated wireless spread spectrum technology to enable an automated datalogger to transmit drainage water amounts simultaneously every 15 min to a remote host. Logged drainage amounts were compared with those manually collected using several statistical methods. The root mean square error (RMSE), the logging efficacy (EF), and the mean difference (MD) were 0.0375, 0.964 and 0.0335 cm, respectively, for 4-yr combined data. The MD between logged and collected drainage amounts was very small and not significantly different from zero for 4-yr combined results. Statistical results indicated that the new lysimeter performed exceptionally well and was capable of monitoring drainage water fluxes in the vadose zone. Real-time seamless monitoring and logging drainage water fluxes was thus possible without the need for costly time-consuming supportive procedures. Keywords: Drainage, Lysimeter, Root zone, Vadose zone.
- 1 January 2017
- Published by American Society of Agricultural and Biological Engineers (ASABE) in Applied Engineering in Agriculture
- Vol. 33 (6) , 849-857
A New Automated Passive Capillary Lysimeter for Logging Real-Time Drainage Water Fluxes
Abstract.: Effective monitoring of chemical transport through the soil profile requires accurate and appropriate instrumentation to measure drainage water fluxes below the root zone of cropping systems. The objectives of this study were to methodically describe in detail the construction and installation of a novel automated PCAP (passive capillary) lysimeter design, and to evaluate the efficacy of this design for logging and monitoring real-time drainage water fluxes occurring below the root zone of corn ( L.) and soybean ( L.) under an overhead sprinkler irrigation system. Sixteen cylindrical PCAP lysimeters with outside dimensions of 32.39 cm in diameter ×74.8 cm height (1000 cm2 surface area) were designed, constructed, and placed 90 cm below the soil surface in a Lihen sandy loam. Two watermark soil moisture and temperature sensors were positioned at 30 and 76 cm depths above each PCAP to monitor soil temperature and water potential continuously. This new design incorporated wireless spread spectrum technology to enable an automated datalogger to transmit drainage water amounts simultaneously every 15 min to a remote host. Logged drainage amounts were compared with those manually collected using several statistical methods. The root mean square error (RMSE), the logging efficacy (EF), and the mean difference (MD) were 0.0375, 0.964 and 0.0335 cm, respectively, for 4-yr combined data. The MD between logged and collected drainage amounts was very small and not significantly different from zero for 4-yr combined results. Statistical results indicated that the new lysimeter performed exceptionally well and was capable of monitoring drainage water fluxes in the vadose zone. Real-time seamless monitoring and logging drainage water fluxes was thus possible without the need for costly time-consuming supportive procedures. Keywords: Drainage, Lysimeter, Root zone, Vadose zone.
- Open Access
- 5 July 2015
- Published by Springer Nature in SpringerPlus
- Vol. 4 (1) , 320
Dryland soil chemical properties and crop yields affected by long-term tillage and cropping sequence
Information on the effect of long-term management on soil nutrients and chemical properties is scanty. We examined the 30-year effect of tillage frequency and cropping sequence combination on dryland soil Olsen-P, K, Ca, Mg, Na, SO4–S, and Zn concentrations, pH, electrical conductivity (EC), and cation exchange capacity (CEC) at the 0–120 cm depth and annualized crop yield in the northern Great Plains, USA. Treatments were no-till continuous spring wheat (Triticum aestivum L.) (NTCW), spring till continuous spring wheat (STCW), fall and spring till continuous spring wheat (FSTCW), fall and spring till spring wheat–barley (Hordeum vulgare L., 1984–1999) followed by spring wheat–pea (Pisum sativum L., 2000–2013) (FSTW-B/P), and spring till spring wheat-fallow (STW-F, traditional system). At 0–7.5 cm, P, K, Zn, Na, and CEC were 23–60% were greater, but pH, buffer pH, and Ca were 6–31% lower in NTCW, STCW, and FSTW–B/P than STW-F. At 7.5–15 cm, K was 23–52% greater, but pH, buffer pH, and Mg were 3–21% lower in NTCW, STCW, FSTCW, FSTW–B/P than STW-F. At 60–120 cm, soil chemical properties varied with treatments. Annualized crop yield was 23–30% lower in STW-F than the other treatments. Continuous N fertilization probably reduced soil pH, Ca, and Mg, but greater crop residue returned to the soil increased P, K, Na, Zn, and CEC in NTCW and STCW compared to STW-F. Reduced tillage with continuous cropping may be adopted for maintaining long-term soil fertility and crop yields compared with the traditional system.
- 5 July 2015
- Published by Springer Nature in SpringerPlus
- Vol. 4 (1) , 320
Open AccessDryland soil chemical properties and crop yields affected by long-term tillage and cropping sequence
Information on the effect of long-term management on soil nutrients and chemical properties is scanty. We examined the 30-year effect of tillage frequency and cropping sequence combination on dryland soil Olsen-P, K, Ca, Mg, Na, SO4–S, and Zn concentrations, pH, electrical conductivity (EC), and cation exchange capacity (CEC) at the 0–120 cm depth and annualized crop yield in the northern Great Plains, USA. Treatments were no-till continuous spring wheat (Triticum aestivum L.) (NTCW), spring till continuous spring wheat (STCW), fall and spring till continuous spring wheat (FSTCW), fall and spring till spring wheat–barley (Hordeum vulgare L., 1984–1999) followed by spring wheat–pea (Pisum sativum L., 2000–2013) (FSTW-B/P), and spring till spring wheat-fallow (STW-F, traditional system). At 0–7.5 cm, P, K, Zn, Na, and CEC were 23–60% were greater, but pH, buffer pH, and Ca were 6–31% lower in NTCW, STCW, and FSTW–B/P than STW-F. At 7.5–15 cm, K was 23–52% greater, but pH, buffer pH, and Mg were 3–21% lower in NTCW, STCW, FSTCW, FSTW–B/P than STW-F. At 60–120 cm, soil chemical properties varied with treatments. Annualized crop yield was 23–30% lower in STW-F than the other treatments. Continuous N fertilization probably reduced soil pH, Ca, and Mg, but greater crop residue returned to the soil increased P, K, Na, Zn, and CEC in NTCW and STCW compared to STW-F. Reduced tillage with continuous cropping may be adopted for maintaining long-term soil fertility and crop yields compared with the traditional system.
- 1 May 2014
- Published by Wiley in Agronomy Journal
- Vol. 106 (3) , 940-944
Camelina Growing Degree Hour and Base Temperature Requirements
Oilseed crops show potential as biofuel feedstocks that can diversify spring wheat (Triticum aestivum L.) rotations in the northern Great Plains. Camelina (Camelina sativa L.) is a relatively new oilseed crop, with limited emergence information available. A 70‐d incubator study investigated the impact of temperature (0, 2, 4, and 16°C), seeding depth (3 and 6 mm), and cultivar (Blaine Creek, Calena, Celine, Ligena, and Suneson) on camelina emergence. After 68 d, camelina emergence at 0°C approached 100%. Base temperature averaged –0.70°C for the five cultivars tested and was 19% lower for the 6‐ than the 3‐mm seeding depth, although emergence was 11% sooner for the 3‐ than the 6‐mm seeding depth. About 1150 growing degree hours were required for 50% emergence, which corresponds to 29 March for camelina planted on 10 March, the earliest date when the average daily temperature exceeds the base temperature according to long‐term weather records for Sidney, MT. These results suggest that camelina emerges at temperatures below the freezing point of water and that early planting in spring would probably be limited by field access due to wet soil rather than the base temperature requirement. Although camelina emerges at temperatures below freezing under laboratory conditions, further investigation is warranted to confirm emergence under field conditions and determine the frost tolerance of camelina subsequent to germination.
- 1 May 2014
- Published by Wiley in Agronomy Journal
- Vol. 106 (3) , 940-944
Camelina Growing Degree Hour and Base Temperature Requirements
Oilseed crops show potential as biofuel feedstocks that can diversify spring wheat (Triticum aestivum L.) rotations in the northern Great Plains. Camelina (Camelina sativa L.) is a relatively new oilseed crop, with limited emergence information available. A 70‐d incubator study investigated the impact of temperature (0, 2, 4, and 16°C), seeding depth (3 and 6 mm), and cultivar (Blaine Creek, Calena, Celine, Ligena, and Suneson) on camelina emergence. After 68 d, camelina emergence at 0°C approached 100%. Base temperature averaged –0.70°C for the five cultivars tested and was 19% lower for the 6‐ than the 3‐mm seeding depth, although emergence was 11% sooner for the 3‐ than the 6‐mm seeding depth. About 1150 growing degree hours were required for 50% emergence, which corresponds to 29 March for camelina planted on 10 March, the earliest date when the average daily temperature exceeds the base temperature according to long‐term weather records for Sidney, MT. These results suggest that camelina emerges at temperatures below the freezing point of water and that early planting in spring would probably be limited by field access due to wet soil rather than the base temperature requirement. Although camelina emerges at temperatures below freezing under laboratory conditions, further investigation is warranted to confirm emergence under field conditions and determine the frost tolerance of camelina subsequent to germination.
- 1 May 2014
- Published by Wiley in Agronomy Journal
- Vol. 106 (3) , 821-830
Nitrogen Use in Durum and Selected Brassicaceae Oilseeds in Two‐Year Rotations
Brassicaceae oilseeds can serve as potential feedstocks for renewable biofuels to offset demand for petroleum‐based alternatives. However, little is known about oilseed crop yield potential and N use in semiarid, wheat (Triticum spp.)‐based cropping systems that dominate the northern Great Plains (NGP). A 5‐yr study was conducted in northeast Montana to investigate the yield potential of a direct seeded system of durum (T. durum Desf.) in rotation with either chemical fallow or three Brassicaceae oilseeds: camelina [Camelina sativa (L.) Crantz], crambe (Crambe abyssinica Hochst. ex R.E. Fries), and canola‐quality Brassica juncea L. Overall, results from the study indicated that seed yield in the three Brassicaceae oilseeds tested in rotation with durum was related (P < 0.001; r2 = 0.68) to a nitrogen recovery index (NRI), indicating the importance of nitrogen use (NU) efficiency in dryland oilseed production, and that B. juncea generally used N more efficiently than crambe and camelina. Similarly, NRI was related (P < 0.001; r2 = 0.72) to grain yield in durum following oilseeds. Grain yield of durum following B. juncea was similar to durum following fallow and greater than durum following camelina or crambe. Durum following crambe tended to use N more inefficiently than durum following camelina, B. juncea, or fallow. Differences in yield and N use of durum and oilseeds varied among years, which underscores the need to further develop management tools to optimize durum‐oilseed cropping systems in highly variable rainfall environments typical of the NGP.
- 1 May 2014
- Published by Wiley in Agronomy Journal
- Vol. 106 (3) , 821-830
Nitrogen Use in Durum and Selected Brassicaceae Oilseeds in Two‐Year Rotations
Brassicaceae oilseeds can serve as potential feedstocks for renewable biofuels to offset demand for petroleum‐based alternatives. However, little is known about oilseed crop yield potential and N use in semiarid, wheat (Triticum spp.)‐based cropping systems that dominate the northern Great Plains (NGP). A 5‐yr study was conducted in northeast Montana to investigate the yield potential of a direct seeded system of durum (T. durum Desf.) in rotation with either chemical fallow or three Brassicaceae oilseeds: camelina [Camelina sativa (L.) Crantz], crambe (Crambe abyssinica Hochst. ex R.E. Fries), and canola‐quality Brassica juncea L. Overall, results from the study indicated that seed yield in the three Brassicaceae oilseeds tested in rotation with durum was related (P < 0.001; r2 = 0.68) to a nitrogen recovery index (NRI), indicating the importance of nitrogen use (NU) efficiency in dryland oilseed production, and that B. juncea generally used N more efficiently than crambe and camelina. Similarly, NRI was related (P < 0.001; r2 = 0.72) to grain yield in durum following oilseeds. Grain yield of durum following B. juncea was similar to durum following fallow and greater than durum following camelina or crambe. Durum following crambe tended to use N more inefficiently than durum following camelina, B. juncea, or fallow. Differences in yield and N use of durum and oilseeds varied among years, which underscores the need to further develop management tools to optimize durum‐oilseed cropping systems in highly variable rainfall environments typical of the NGP.
- 1 July 2011
- Published by Wiley in Agronomy Journal
- Vol. 103 (4) , 1292-1298
Long‐Term Lentil Green‐Manure Replacement for Fallow in the Semiarid Northern Great Plains
Summer fallow results in inefficient precipitation use and could potentially be replaced with a green manure (GM) crop that reduces fertilizer N application. A 12‐yr study on a Williams loam (fine‐loamy, mixed, superactive, frigid Typic Argiustoll) was used to determine GM impacts on soil‐N fertility, soil organic carbon (SOC), water use, yield, and water productivity (WP) of spring wheat (Triticum aestivum L.). Lentil (Lens culinaris Medikus cultivar Indianhead) was grown in rotation with nonfertilized spring wheat and killed either mechanically (GMMF) or chemically (GMCF). Inorganic N fertilizer treatments included annually cropped wheat (ACW), and wheat‐fallow rotations (WFR) with mechanical (MF) or chemical (CF) fallow management. Low soil nitrate during the first 5 yr of the study resulted in a 33% decrease (P < 0.05) in wheat yield in GM compared to WFR. During the latter 6 yr, wheat yield differed by 2%, due to 26% greater spring soil nitrate (0–0.6 m) in GM than WFR, and growing season change in nitrate N showed a 2.2‐fold N‐cycling advantage of GM over WFR. Water use during nonwheat periods was similar in GM and WFR when lentil was killed at full bloom, but when grown to lower pod set GM used 20% more water than WFR. After 11 yr, SOC in the surface 15 cm was 9.1% greater in treatments with chemical management than those with mechanical management. Green manure, with proper management, maintains WP and offsets fertilizer N needs after about three cropping cycles compared with traditional wheat–fallow rotations.
- 1 July 2011
- Published by Wiley in Agronomy Journal
- Vol. 103 (4) , 1292-1298
Long‐Term Lentil Green‐Manure Replacement for Fallow in the Semiarid Northern Great Plains
Summer fallow results in inefficient precipitation use and could potentially be replaced with a green manure (GM) crop that reduces fertilizer N application. A 12‐yr study on a Williams loam (fine‐loamy, mixed, superactive, frigid Typic Argiustoll) was used to determine GM impacts on soil‐N fertility, soil organic carbon (SOC), water use, yield, and water productivity (WP) of spring wheat (Triticum aestivum L.). Lentil (Lens culinaris Medikus cultivar Indianhead) was grown in rotation with nonfertilized spring wheat and killed either mechanically (GMMF) or chemically (GMCF). Inorganic N fertilizer treatments included annually cropped wheat (ACW), and wheat‐fallow rotations (WFR) with mechanical (MF) or chemical (CF) fallow management. Low soil nitrate during the first 5 yr of the study resulted in a 33% decrease (P < 0.05) in wheat yield in GM compared to WFR. During the latter 6 yr, wheat yield differed by 2%, due to 26% greater spring soil nitrate (0–0.6 m) in GM than WFR, and growing season change in nitrate N showed a 2.2‐fold N‐cycling advantage of GM over WFR. Water use during nonwheat periods was similar in GM and WFR when lentil was killed at full bloom, but when grown to lower pod set GM used 20% more water than WFR. After 11 yr, SOC in the surface 15 cm was 9.1% greater in treatments with chemical management than those with mechanical management. Green manure, with proper management, maintains WP and offsets fertilizer N needs after about three cropping cycles compared with traditional wheat–fallow rotations.
- 16 May 2011
- Published by Taylor & Francis in Archives of Agronomy and Soil Science
- Vol. 57 (3) , 293-303
Long-term effects of topsoil removal on soil productivity factors, wheat yield and protein content
Quantifying long-term effects of soil erosion on plant production and soil quality can aid in restoring degraded soils. The objectives of this study were to determine the long-term effects of topsoil removal on spring wheat (Triticum aestivum L.) yield and soil productivity factors. In 1982, the surface 0, 6, 12, and 18 cm of topsoil was mechanically removed from a Williams loam (fine-loamy, mixed, superactive, frigid Typic Argiustoll) and subsequently cropped. Soil samples were collected in 1998. There was no difference in soil organic matter (SOM), particulate organic matter (POM), mineralizable N, or water stable soil aggregates (WSA) in the surface 15 cm. Though not significant, there was an average increase of 1.2 g SOM kg−1 soil from the surface 15 cm since 1982, but fungal and bacterial biomass was reduced. The SOM and POM increased in the surface 15 cm of soil where grass was planted in strips between plots. Topsoil removal did not affect soil water at planting nor wheat yields from 1998–2001. The use of commercial fertilizer maintained crop yields, but SOM remained unchanged indicating that, restoring erosion damage is unlikely with a conventionally tilled wheat-fallow rotation in semi-arid regions.
- 16 May 2011
- Published by Taylor & Francis in Archives of Agronomy and Soil Science
- Vol. 57 (3) , 293-303
Long-term effects of topsoil removal on soil productivity factors, wheat yield and protein content
Quantifying long-term effects of soil erosion on plant production and soil quality can aid in restoring degraded soils. The objectives of this study were to determine the long-term effects of topsoil removal on spring wheat (Triticum aestivum L.) yield and soil productivity factors. In 1982, the surface 0, 6, 12, and 18 cm of topsoil was mechanically removed from a Williams loam (fine-loamy, mixed, superactive, frigid Typic Argiustoll) and subsequently cropped. Soil samples were collected in 1998. There was no difference in soil organic matter (SOM), particulate organic matter (POM), mineralizable N, or water stable soil aggregates (WSA) in the surface 15 cm. Though not significant, there was an average increase of 1.2 g SOM kg−1 soil from the surface 15 cm since 1982, but fungal and bacterial biomass was reduced. The SOM and POM increased in the surface 15 cm of soil where grass was planted in strips between plots. Topsoil removal did not affect soil water at planting nor wheat yields from 1998–2001. The use of commercial fertilizer maintained crop yields, but SOM remained unchanged indicating that, restoring erosion damage is unlikely with a conventionally tilled wheat-fallow rotation in semi-arid regions.