Lu Chai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lu Chai has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Ching-Yue Wang
Ultrafast Laser Laboratory, Key Laboratory of Opto-Electronic Information Science and Technology of Ministry of Education, College of Precision Instrument and Opto-electronics Engineering, Tianjin University, Tianjin, China
6 shared publications- Minglie Hu
Tianjin University
6 shared publications Chingyue Wang
Tianjin Univ. (China)
2 shared publicationsXiao-Hui Fang
Ultrafast Laser Laboratory, Key Laboratory of Opto-Electronic Information Science and Technology of Ministry of Education, College of Precision Instrument and Opto-electronics Engineering, Tianjin University, Tianjin, China
2 shared publications- Yanfeng Li
Tianjin University
2 shared publications - Youjian Song
Tianjin University
2 shared publications
Latest Publications
- 1 January 2015
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 13 (7) , 070003-70006
High-repetition-rate femtosecond laser micromachining of poly(methyl methacrylate)
Investigations are performed to explore high-repetition-rate femtosecond laser ablation effects on the physical and chemical properties of poly(methyl methacrylate) (PMMA). A scanning electron microscopy (SEM) is used to characterize the morphology change in the laser-ablated regions. The infrared and Raman spectroscopy reveals that the fundamental structure of the PMMA is altered after laser ablation. We demonstrate the cumulative heating is much greater during high-repetition-rate femtosecond laser ablation, supporting a photothermal depolymerization mechanism during the ablation process.
- 1 January 2015
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 13 (7) , 070003-70006
High-repetition-rate femtosecond laser micromachining of poly(methyl methacrylate)
Investigations are performed to explore high-repetition-rate femtosecond laser ablation effects on the physical and chemical properties of poly(methyl methacrylate) (PMMA). A scanning electron microscopy (SEM) is used to characterize the morphology change in the laser-ablated regions. The infrared and Raman spectroscopy reveals that the fundamental structure of the PMMA is altered after laser ablation. We demonstrate the cumulative heating is much greater during high-repetition-rate femtosecond laser ablation, supporting a photothermal depolymerization mechanism during the ablation process.
- 30 November 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8307
Stable CW operation in a ring fiber laser based on Er-doped photonic crystal fiber
A novel ring fiber laser based on Er-doped photonic crystal fiber (EDPCF) is demonstrated. EDPCF is used as gain medium to implement stable CW operation. The laser output wavelength can be continuously tuned over the range from 1529 to 1535 nm by adjusting the polarization state of the light inside the cavity. Stable dual-wavelength CW operation is also observed with proper settings of the intracavity polarization controllers. The laser stability in terms of the output power and the operation wavelength is characterized, and less than ±0.05 dB power fluctuation as well as 18 pm wavelength perturbation are obtained.
- 30 November 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8307
Stable CW operation in a ring fiber laser based on Er-doped photonic crystal fiber
A novel ring fiber laser based on Er-doped photonic crystal fiber (EDPCF) is demonstrated. EDPCF is used as gain medium to implement stable CW operation. The laser output wavelength can be continuously tuned over the range from 1529 to 1535 nm by adjusting the polarization state of the light inside the cavity. Stable dual-wavelength CW operation is also observed with proper settings of the intracavity polarization controllers. The laser stability in terms of the output power and the operation wavelength is characterized, and less than ±0.05 dB power fluctuation as well as 18 pm wavelength perturbation are obtained.
- 26 September 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 29 (22) , 3428-3432
Spatially Flat In-Phase Supermode in Multicore Hybrid Photonic Crystal Fiber
We propose a novel hybrid multicore photonic crystal fiber in which the air holes between the cores are replaced with high-index rods. Using coupled mode theory and finite element method, we demonstrate that a spatially flat in-phase supermode can be achieved at the resonant wavelengths without mode shaping. Such a design is more robust to perturbations.
- 26 September 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 29 (22) , 3428-3432
Spatially Flat In-Phase Supermode in Multicore Hybrid Photonic Crystal Fiber
We propose a novel hybrid multicore photonic crystal fiber in which the air holes between the cores are replaced with high-index rods. Using coupled mode theory and finite element method, we demonstrate that a spatially flat in-phase supermode can be achieved at the resonant wavelengths without mode shaping. Such a design is more robust to perturbations.
- 12 January 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 22 (5) , 350-352
High-Energy Subpicosecond Pulse Generation From a Mode-Locked Yb-Doped Large-Mode-Area Photonic Crystal Fiber Laser With Fiber Facet Output
Compact high-energy mode-locked fiber lasers with fiber facet output based on a large-mode-area photonic crystal fiber are reported. Ultrashort pulses with 46-nJ pulse energy and 1.9-ps time duration are obtained in all-normal-dispersion regime. Inserting a spectral filter, the laser system generates 828-fs pulses, with 30-nJ pulse energy, and 36.3-kW peak power directly.
- 12 January 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 22 (5) , 350-352
High-Energy Subpicosecond Pulse Generation From a Mode-Locked Yb-Doped Large-Mode-Area Photonic Crystal Fiber Laser With Fiber Facet Output
Compact high-energy mode-locked fiber lasers with fiber facet output based on a large-mode-area photonic crystal fiber are reported. Ultrashort pulses with 46-nJ pulse energy and 1.9-ps time duration are obtained in all-normal-dispersion regime. Inserting a spectral filter, the laser system generates 828-fs pulses, with 30-nJ pulse energy, and 36.3-kW peak power directly.
- 7 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 44 (7) , 686-691
A Highly Efficient and Widely Tunable Bifunctional Yb:GdYAB Laser
We demonstrate a highly efficient and widely tunable, bifunctional laser operated at both infrared and self-frequency-doubling (SFD) based on Yb:GdYAB crystal. An optical conversion efficiency of 67.9% and a slope efficiency of 86% at 1048 nm have been obtained. A broad tunability of 67 nm between 1009 and 1076 nm has also been achieved. Furthermore, an efficient and compact SFD green laser has been demonstrated with an output power of 488 mW at 524 nm, corresponding to a diode-to-green optical conversion efficiency of 18.6%.
- 7 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 44 (7) , 686-691
A Highly Efficient and Widely Tunable Bifunctional Yb:GdYAB Laser
We demonstrate a highly efficient and widely tunable, bifunctional laser operated at both infrared and self-frequency-doubling (SFD) based on Yb:GdYAB crystal. An optical conversion efficiency of 67.9% and a slope efficiency of 86% at 1048 nm have been obtained. A broad tunability of 67 nm between 1009 and 1076 nm has also been achieved. Furthermore, an efficient and compact SFD green laser has been demonstrated with an output power of 488 mW at 524 nm, corresponding to a diode-to-green optical conversion efficiency of 18.6%.
- 14 March 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 20 (8) , 581-583
Tunable Bandpass Filter With Solid-Core Photonic Bandgap Fiber and Bragg Fiber
A tunable spectral bandpass filter which includes two fibers with different bend loss edges-a solid-core photonic bandgap fiber with short wavelength bend loss edge and a Bragg fiber with long wavelength bend loss edge-is presented in this letter. The central wavelength and the bandwidth can be widely tuned around 1100 nm by controlling the bend diameters of the two fibers respectively. It can be a low-loss in-line fiber device due to its all solid structure and standard splice connection.
- 14 March 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 20 (8) , 581-583
Tunable Bandpass Filter With Solid-Core Photonic Bandgap Fiber and Bragg Fiber
A tunable spectral bandpass filter which includes two fibers with different bend loss edges-a solid-core photonic bandgap fiber with short wavelength bend loss edge and a Bragg fiber with long wavelength bend loss edge-is presented in this letter. The central wavelength and the bandwidth can be widely tuned around 1100 nm by controlling the bend diameters of the two fibers respectively. It can be a low-loss in-line fiber device due to its all solid structure and standard splice connection.
- 29 November 2007
- Published by SPIE-Intl Soc Optical Eng
- Vol. 6825
Fundamental microstructures fabricated on FOTURAN glass using femtosecond laser
Femtosecond laser with 775nm wavelength and 150fs pulse width was empoyed to fabricate microstructures on a photosensitive glass (FOTURAN). The fabrication procedures included three steps: focused irradiation of femtosecond laser, programmed heat treatment and wet chemical etching in 8% ultrasonic solution of hydrofluoric acid for 50 minutes. By adopting appropriate incident laser parameters, including average power, numbers of pulses and scanning velocity, several fundamental microstructures had been fabricated on FOTURAN. The morphologies of these microstructures were analyzed by optical microscope, atomic force microscope and scanning electron microscope. Concave dots with smooth wall and several tens of microns in diameter are obtained on the surface. Microholes with circular cross-section and several tens microns in diameter are fabricated by femtosecond laser longitudinal writing mode, and currently the aspect ratio value above 8 is achieved. Femtosecond laser-induced index-refractive-change structures and shallow grooves are fabricated on the surface by transverse writing mode. The influences of incident laser parameters on final fabrication results are also experimentally characterized.
- 29 November 2007
- Published by SPIE-Intl Soc Optical Eng
- Vol. 6825
Fundamental microstructures fabricated on FOTURAN glass using femtosecond laser
Femtosecond laser with 775nm wavelength and 150fs pulse width was empoyed to fabricate microstructures on a photosensitive glass (FOTURAN). The fabrication procedures included three steps: focused irradiation of femtosecond laser, programmed heat treatment and wet chemical etching in 8% ultrasonic solution of hydrofluoric acid for 50 minutes. By adopting appropriate incident laser parameters, including average power, numbers of pulses and scanning velocity, several fundamental microstructures had been fabricated on FOTURAN. The morphologies of these microstructures were analyzed by optical microscope, atomic force microscope and scanning electron microscope. Concave dots with smooth wall and several tens of microns in diameter are obtained on the surface. Microholes with circular cross-section and several tens microns in diameter are fabricated by femtosecond laser longitudinal writing mode, and currently the aspect ratio value above 8 is achieved. Femtosecond laser-induced index-refractive-change structures and shallow grooves are fabricated on the surface by transverse writing mode. The influences of incident laser parameters on final fabrication results are also experimentally characterized.
- 15 May 2002
- Published by Elsevier in Optics Communications
- Vol. 206 (1-3) , 7-12
Compact and material-dispersion-compatible Offner stretcher for chirped pulse amplifications
- 15 May 2002
- Published by Elsevier in Optics Communications
- Vol. 206 (1-3) , 7-12
Compact and material-dispersion-compatible Offner stretcher for chirped pulse amplifications
- 16 April 2001
- Published by SPIE-Intl Soc Optical Eng
- Vol. 4267, 124-128
Starting of self-mode-locking solid state laser
A dynamic equation of passive mode locking with the equivalent fast saturable absorber in self-mode-locked solid state laser is presented. With the linearized rate equations , we obtained the self-starting condition .Furthermore, the relation between the growth rate of coupling modes and the starting factor is presented. The theory is in good agreement with the experimental results obtained by other researchers.
- 16 April 2001
- Published by SPIE-Intl Soc Optical Eng
- Vol. 4267, 124-128
Starting of self-mode-locking solid state laser
A dynamic equation of passive mode locking with the equivalent fast saturable absorber in self-mode-locked solid state laser is presented. With the linearized rate equations , we obtained the self-starting condition .Furthermore, the relation between the growth rate of coupling modes and the starting factor is presented. The theory is in good agreement with the experimental results obtained by other researchers.